military and tactical knives

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 pieces

The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.

It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.

The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.

Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.

KNIFE RETIRED FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostages

When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Crater Blue anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.

The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.

Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Origin: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cobalt Black Cerakote
Handle: 6AI-4V Titanium
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 9.7mm
Weight: 103g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited edition of 1000 pieces

With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

Intended Use: Sporting / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Tumbled & Satin
Handle: Anodized titanium with flamed hardware
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 11mm.
Weight: 106g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.

Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.

It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.

Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.


Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

The product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai carried at all times in contact with the body, where the Katana was carried exclusively in battle. The blade produced from Boehler N690 steel is hardened to 58HRC while the handle is made of forprene, an elastomer that falls under the "NATO standard" for resistance to extreme conditions. The Waki Black comes with a cordura, military-derived scabbard that ensures safe carrying of the razor-sharp blade and its protection from shocks that could reduce its efficiency. The scabbard is also equipped with the MOLLE system that allows it to be carried on tactical vests and general belts.

Intended Use: Tactical/Machete

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co at 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: cardboard box with Extrema Ratio logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening system

Il BF2 è un chiudibile “full size” particolarmente indicato per l’impiego professionale da parte di operatori militari e di polizia sul campo. L’impugnatura è salda e confortevole; la clip, reversibile ed avvolgente, diventa un utile e comodo appoggio per il pollice in “reverse grip”. La guancetta è piena con i caratteristici piani ribassati per impegnare i “pin” d’apertura senza che sporgano dal profilo del coltello chiuso. La lama, disponibile in versione drop o tanto, ha l’arrotatura piatta e, come nel BF1, la punta particolarmente spessa e resistente. Il meccanismo di blocco della lama è il collaudato LINER-LOCK, coadiuvato da un meccanismo di sicura da azionare manualmente protetto da un carter. 

Destinazione d'uso: Tattico/Militare

Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Paese di produzione: Italia
Impugnatura: Anticorodal
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello aperto

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James Helm

Destinazione d'uso: Utility

Tipo di produzione: Industriale
Paese di produzione: Cina
Lama: ful tang in acciaio D2
Finitura lama: Black PVD
Manicatura: G10
Lunghezza lama: 80mm.
Spessore lama: 5.7mm.
Lunghezza totale: 166mm.
Peso: 157g.
Fodero: in Kydex, con aggancio multiposizione
Confezione: scatola di cartone con loghi Boker Plus
Note: -

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 95mm.
Blade thickness: 3.7mm.
Total length: 230mm.
Weight: 147g.
Clip: removable
Closure: LinerLock
Packaging: nylon case with zip - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De Santis

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: Full tang, Niolox stainless steel at 59/61HRC
Blade treatment: Black Stonewashed
Handle: G-10
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 270mm.
Weight: 225g.
Scabbard: Kydex, with Tek-Lok type fitting
Package: Cardboard box with Fox logos
Notes: Design by Black Rock Knives

After the success of the FULCRUM multirole knife, the civil bayonet version NFG (No Fixing Gears, without rifle attachment) was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade withstands breaking loads exceeding 150 kg, the tip is very robust and the profile allows you to work for a long time with the knife without affecting the sharpness of the last section . The advanced center of gravity and the weight of the blade make it suitable for heavy field work.

Intended use: tactical / military / multirole

Blade: N690Co 58HRC stainless steel
Handle: removable, in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Closed Length: -
Total length: 310mm.
Balance: advanced, 1.5 cm from the lower guard branch
Weight: 330g.
Closing: -
Clip: -
Sheath: modular tactical, from thigh or belt, in Nylon and Kydex, with blade attachment system for cutting with wire cutters
Notes: diamond sharpener integrated in the sheath - civil version, without rifle couplings

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Mil-C-13924 burnishing
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade finish: Gray Coated
Handle: Woodland Green anodized 6061-T6 aluminum
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thick when closed: 10.4mm
Weight: 70g.
Closing system: AxisLock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -

 -

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli

After the success of the FULCRUM multi-role knife, the bayonet version was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade holds loads at break above 150 kg, the tip is very sturdy and the profile allows it to work for a long time with the knife without affecting the sharpening of the last section , which guarantees, together with the partial dorsal sharpening, to maintain the penetration capacity necessary for hand-to-hand combat against targets covered by heavy clothing, clothing and soft ballistic protections. The advanced center of gravity and the weight of the blade make it suitable for heavy field work. NFG version (No Fixing Gears, without rifle mount).

Intended use: tactical / military / multi-role

Blade: full tang in stainless steel N690Co 58HRC
Handle: removable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Sheath: modular tactile with thread trimmer, thigh or belt, in Nylon and Kydex

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: USA
Blade: CPM-3V steel
Blade finish: Gray Coated
Handle: Grivory with
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thick when closed: 10.4mm
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: on the guard branch
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black Idroglider
Handle: Forprene
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 295g.
Sheath: cordura, with leg strap
Packaging: cardboard box with Fox logos
Note: -

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Stonewashed
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Teflonatura
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

Target: Tactical / Military

Blade: Stainless Steel N690Co 58HRC
Handle: Kraton
Blade Length: 340mm.
Blade thickness: 6.3mm.
Blade Finishing: MIL-C-13924 Brushing
Total length: 493mm.
Balancing: advanced
Weight: 650g.
Sheath: Tactical, Nylon, Thigh

Intended use: Utility
Type of production: Industrial
Production Country: Italy
Blade: Stainless steel N690Co 58 / 60HRC
Blade treatment: HNCF
Handle: Forprene
Blade length: 240mm.
Blade thickness: 6mm.
Overall length: 370mm.
Balancing: Advanced, to 5cm from the guard branch
Weight: 440g.
Sheath: Nylon, with M.O.L.L.E. attacks
Packaging: cardboard box with Fox logos

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Desert Warfare
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Stone Washed
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Intended use: Tactical

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 68mm.
Blade thickness: 4mm.
Closed Length: 110mm.
Overall length: 181mm.
Thick when closed: 23mm. (15mm without clips)
Weight: 139g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos

Fox - Dart Tanto Karambit Training by Doug Marcaida - FX-597TK - knife

Intended use: Tactical Training

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel 420 with tip and rounded blade
Blade treatment: -
Handle: G-10
Blade length: 64mm.
Blade thickness: 3mm.
Closed Length: 120mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 104g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMD
Notes: Developed by Doug Marcaida and Lad Mandiola - Opening Wave by Emerson

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK2 is a small knife that extends the family of the Extrema Ratio neck knives.

It differs from the model NK1 for blade tip tanto styled and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or forefinger depending on use. The structure enables both use for very effective cutting work or for small precision work.The quick release Kydex sheath is supplied with paracord for carrying on the neck.

Intended use: Neck Knife
Type of production: Industrial
Production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 50mm.
Blade thickness: 6.3mm.
Total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with Extrema Ratio logo
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK2 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

With the T4000 C continues the purest series so Extrema Ratio, for lovers of the profile of Japanese blades that do not want to give up the accessories typically tactical as sheath and handle.

Intended use: Tactical / Backup

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Bohler N690Co to 58HRC
Treatment blade: Browning MIL-C-13924
Handle: Forprene
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 208mm.
Thick when closed: -
Balancing: -
Weight: 196g.
Closing: -
Clip: -
Sheath: Nylon
Packaging: Cardboard box with logos Extrema Ratio
Notes: -

Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breaker

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie Emerson

This knife was designed and perfected in every detail for its primary use in the marine environment. The blade has a flat rounding that allows symmetrical cutting work with wider support. The tip, on the other hand, which is thick and durable thanks to the tanto version, allows greater penetration and a sharper, more precise cut. The stone washed finish process facilitates locating in the marine environment.

The structure of the handle, made of anodized anticorodal aluminum, features a design with milling in concentric circles and lightening and anti-slip perforations so as to facilitate rinsing from saltiness. A small slot is cut into the middle of the cheek piece to allow for tightening or releasing smaller shackles. BF2 V is equipped with reversible clip; adjusting screw retainer for closing and opening the blade; 70-mm. knot shock ankle with fastening mechanism; and correctable. The presentation of the BF2 V took place on the Amerigo Vespucci School Ship.




Intended use: sporting/nautical

Type of production: industrial
Blade: stainless steel N690Co 58HRC with Stone Washed finish
Country of Production: Italy
Handle: Anticorodal with stainless steel reinforcements
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 190mm.
Weight: 149g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: Anklet/knife lock - Small sized turnbuckle - Quick-release tactical corrector - Open knife safety catch - Safety catch for Anklet/knife lock

Intended use: Tactical / Military

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 210mm.
Weight: 140g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Notes: additional safety stop with open knife

Fox - Hoplite Combat Knife - Kraton G-Coyote Tan - FX-0171116 - knife

Intended Use: Combat / All Round Utility

Blade: Stainless Steel N690Co 59/60HRC
Treatment: Coyote Tan Idroglider
Handle: Kraton
Blade length: 185mm.
Blade Thickness: 5mm.
Length closed: -
Overall length: 315mm.
Balancing: On the branch guard
Weight: 285g.
Closure: -
Clip: -
Sheath: Modular fiberglass, and Cordura Nylon with stainless steel cable cutters
Notes: -

Intended use: Sport

Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -

Intended use: Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: in steel D2
Blade treatment: Black Powder Coating
Handle: in Griv-Ex polymer, with steel knob
Blade length: 171mm.
Blade thickness: 5mm.
Total length: 298mm.
Thick when closed: 13mm.
Balancing: Set back
Weight: 332g.
Sheath: Secure-Ex in ABS, from thigh
Packaging: Cardboard box with Cold Steel logos
Note: -

RAO ACQUIRED FROM VERSION 'AIR FORCE

Intended Use: Military / Tactical

Type of production: industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: testudo
Handle: non corroding 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Total length: 261mm.
Balance: -
Weight: 335g.
Closure: front lock changed - safety pin threaded
Clip: -
Pouch: Comes with a special survival kit that attaches to the knife sheath with MOLLE system
The kit contains whistle, compass, rope, flint, water purification tablets, chain saw, brass wire, torch, diamond sharpener.
One version is produced with black knife sheath and green.

The sheath is used only with the knife open.

Notes: logos departments on the blade

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel laminated with cutting edge in VG-10
Blade treatment: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 249g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos
Notes: new production 2018

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -

Knife from a private collection, overall in excellent condition, with scratches on the blade due to insertion and removal from the sheath. Unpackaged - Checked, certified by our in-house laboratory.

Designed for NATO military aircraft crews, the ASEK-Bowie is a rescue and emergency knife

Intended use: Fighter / Tactical

Type of production: industrial
Blade: 440 56HRC stainless steel
Blade treatment: Teflon coated
Production Lama: Germany
Handle: Polyamide reinforced with fiberglass
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -1cm back from the guard branch
Weight: 235g.
Sheath: cordura and polyamide with sharpener and small backup knife

Intended use: tactical / military / multirole
Blade: full tang stainless steel N690Co 58HRC Desert Warfare
Handle: Removable in Forprene
Blade length: 180mm.
Blade Thickness: 6.3mm.
Closed Length: -
Overall length: 310mm.
Balancing: Advanced, 1.5 cm from the branch of the lower guard
Weight: 325g.
Closed: -
Clip: -
Sheath: modular tactical, from thigh or belt, Nylon and Kydex
Notes: -

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Lama production: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 99mm.
Total length: 168mm.
Balancing: -
Weight: 85g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Note:

After the Shrapnel, Extrema Ratio gives us a second knife that, despite having a total length of only 21 centimeters, maintains all the technical / tactical characteristics of the previous models.

The Fulcrum C (compact) therefore completes the Fulcrum series with a fixed blade. Sturdy and compact knife, suitable for emergency or concealed use.

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balancing: set back
Weight: 200g.
Sheath: rigid in ABS with Tek-Lok coupling with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates

Extrema Ratio Fulcrum Compact Testudo

After Shrapnel, Extrema Ratio gives us a second knife which, while having a total length of just 21 centimeters, it maintains all the technical / tactical previous models.

The Fulcrum C (compact) then goes to complete the series of Fulcrum fixed blade knife and turns out to be a robust and compact, suitable for use in emergency or concealed.

Occupation: knife backup
N690 steel blade with 58HRC coated testudo
Blade thickness: 6.3 mm.
Blade length: 110 mm.
Total length: 210 mm.
Handle in Forprene
ABS hard case with Tek-Lok coupling with automatic retention of the knife.

Knife distributed in 2000 pieces to the Alpine Body of the Italian Army as part of the "Nibbio" operation in Afghanistan

Target for use: tactical / military / multiruolo

Blade: full tang in stainless steel N690Co 58HRC
Manicure: Removable in Forprene
Blade Length: 180mm.
Blade thickness: 6.3mm.
Closed length: -
Total Length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 325g.
Closure: -
Clip: -
Sheath: modular tactical, thigh or belt, in Nylon and Kydex
Notes: -

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: Italy
Blade: Steel N690Co 58HRC
Blade Finish: Testudo
Handle: Forprene
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 280mm.
Weight: 295g.
Sheath: Modular, cordura, with M.O.L.L.E system and with ABS inner shell
Packaging: black cardboard box with Extrema Ratio logos
Notes: -