Museum Replicas
-
Museum Replicas Windlass - Complete armor of Augusta - 300508 - 205 cm - handcrafted
Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.
The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)
This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.
Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.
The helmet can accept up to three decorative plumes (sold separately).
Perfect for decorating a tavern, a living room, a business
Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg300508 -
Museum Replicas Windlass - Helmet of Themistocles - 881014 - wearable helmet
Fully wearable reproduction of Themistokles helmet from the movie 300 Rise of an Empire.
The helmet is made of steel with an antique bronze finish, has a soft padded fabric lining inside, adjustable with leather laces, which can be worn by most people.
Dimensions: about 30 x 30 x 20 cm
881014 -
Museum Replica Windlass - Cappello a tricorno in cuoio - 200550 - abbigliamento
Questa replica, costruita con metodologie e principi del tutto simili a quelli utilizzati nel medioevo, risultaesteticamente dettagliata e ben rifinita come qualsiasi prodotto espositivo ma anche assolutamente funzionale.
Completamente realizzato in cuoio ha una circonferenza interna di circa 65 centimetri, pesa 800 g. ed un lacciolo aggiustabile per una perfetta calzabilità.200550 -
Museum Replicas Windlass - 100298 Monks Robe Red - Medieval clothing
Museum Replicas Windlass - 100298 Monks Robe - Medieval clothing This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer. Completely made of heavy brown cotton, has a hood and rope belt.100298R -
Windlass - Altair Under Tunic
This under tunic is from Assassin's Creed and worn by Altair the Assassin. His long sleeve under tunic is a soft gray and made of 100% cotton. Coordinates with the Altair Over Tunic with Hood #883002, which is also shown in the picture. The complete outfit is shown here, but to get the look you have to purchase all the pieces or look in our Complete Outfits for Men section. Choose from sizes S/M or L/XL. Key Features: Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by Altair the Assassin883001 -
Museum Replicas Windlass - Conan - Father Sword Bronze - 884017 - fantasy sword
Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"
Handcrafted by Windlass Steelcrafts® expert blacksmiths
- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hiltBlade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.
884017 -
Museum Replicas Windlass - Dress for baby monaco 100794 - Medieval clothing
Dress for baby monaco 100794 - Medieval clothing
This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer.
This dress is designed for children aged 7 to 13 years.
Completely made of heavy brown cotton, has a hood and rope belt.100794 -
Museum Replicas Windlass - Lorica Segmentata300176 - armatura romana - abbigliamento
Armatura romana da legionario indossabile realizzata in acciaio.
La lorica segmentata, cosiddetta dagli studiosi a partire dal periodo del Rinascimento, è la corazza che nell'immaginario collettivo viene più facilmente associata al legionario romano.Questo tipo di corazza risultava più leggera della Lorica Hamata, ma meno confortevole rispetto a quest'ultima pur mantenendo liberi i movimenti di torso e braccia, costituiva però una pesante protezione che appesantiva decisamente il combattente.La Segmentata offriva una ottima protezione contro la maggior parte dei colpi di frecce e spade, soprattutto provenienti dall'alto.
Tuttavia la sua struttura fatta di cuoio e cerniere di bronzo e orichalcum, una lega simile al moderno ottone, la rendeva più difficilmente mantenibile per il fatto di necessitare di pezzi di ferro laminato interi.
Questo potrebbe spiegare in parte i motivi per cui in epoca tarda fu abbandonata a favore delle antiche Hamatae, per il vero mai dismesse.300176 -
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Worn by the crusaders of the hospital, this long brown cotton tunic has a large white cross embroidered on the chest and a flashy belt rope.
And 'completed by strips of chain mail antiqued to give the illusion of wearing a complete armor beneath his tunic knit.
The tunic also comes complete with a heavy cotton hood with cross embroidered on the left shoulder.
Material: 100% cotton100588 -
Windlass - Crusader Priest Robe
This holy follower wears both the blood red front tabard of the Crusades, while also the gold embroidered lion rampant of King Richard. Full pure white cotton robe with matching hood and cap. Heavy gold applique adorns the sleeves. Dry clean only. Choose S/M or L/XL. Key Features Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by the Crusader Priest883010 -
Museum Replicas Windlass - Black sword - 501176 - Handcrafted Sword
"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "
The Blacksword fantasy sword features a burnished tempered carbon steel blade.
The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp501176 -
Museum Replicas Windlass - Leif Erikson Sword - 501651 - Viking sword
Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.
High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.
Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp501651 -
Museum Replicas Windlass - Accolade Dagger of the Knights Templar 404335 - craft dagger
This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.404335 -
Museum Replicas Windlass - Sword of Robert the Bruce - 501495 - historical sword
Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.Sword characteristics:
- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch501495 -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430 -
Museum Replicas Windlass - Brass Two Hand Battle Sword 501010 - battle ready
After many requests, they’re here! We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat. Each blade is built to withstand a lot of use by reenactors or stage performers. Forged of high carbon steel that’s fully tempered. The edges and points are 3/16″ thick and rounded over for better nick resistance. These are crafted just like our regular swords – medieval swords have peened steel and brass parts, and stout wood grips covered with leather; rapiers have very tough, wire wrapped cast grips and threaded tang ends. All come with scabbards. Use at your own risk. Use proper safety precautions at all times. Two Hand Battle Swords-Overall 481/2″. Blade 381/2″ long, 21/8″ wide. Wt: 4 lbs., 4 oz.501010 -
Windlass - Italian Arming Dagger 403599 - craft dagger
Reproduction of an Italian dagger of the 14th / 15th century.
The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.
Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.
Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.403599 -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Museum Replicas Windlass - Medici Renaissance Dagger 403721 - craft dagger
Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.
The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.
Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.403721 -
Museum Replicas Windlass - Damascus Viking Sword 500262 - Viking sword
Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.
Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -500262 -
Museum Replicas Windlass - Viking Sword 501472 - sword
Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -501472 -
Museum Replicas Windlass - The Accolade Knight Templar sword 50235
Non Nobis, Domine, Non Nobis, Sed Nomini Tuo Da Glorium
These iconic words engraved on the blade define this historic sword replica. The creed of the Knights Templar - Nothing for us, Lord, nothing for us but for the glory of thy name - marked their illustrious and sometimes infamous 200 year military influence.
This magnificent sword named The Accolade would have been a sword worthy of the Grand Master to knight a loyal member into this holy order. The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability.
The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonomous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.- Overall length: 101,5cm
- Blade length: 82cm
- Width of the blade: 5.8 cm
- Weight: 1640 gr
- Blanciatura: 13cm from the guard branch
- Accessories: scabbard and leather belt502356 -
Museum Replicas Windlass - Battle Sword in a hand 501000 - battle ready
- Battle Sword in a hand 501000 - battle ready
Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch501000 -
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.
Each blade is built to withstand a lot of use by reenactors or stage performers.
Full tang sword forged of high carbon steel 1095, fully tempered.
The edges and points are 3/16" thick and rounded over for better nick resistance.
Wood grips covered with leather and other authentic materials.
All come with scabbards.
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch501002 -
Museum Replicas Windlass - Gladiator - Tigris Axe 880011
Museum Replicas Windlass - Gladiator - Tigris Axe 880011
From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.
Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.Weight: 2014g.
wooden display support© 2010 DW Studios LLC. All Rights Reserved.
880011 -
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Guard and pommel are made of steel.
Sheath, including the sword, a leather belt with.
- Overall length: 103cm
- Length of the blade: 86,5cm
- Blade width: 4.8 cm
- Weight: 1260 gr
501226 -
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr501423 -
Museum Replicas Windlass - The Eagle - Sword of Marcus Aquila - Gladio - products from films
Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.
Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios888005 -
Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft
Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft
Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather100342 -
Museum Replicas Windlass - 1400 War Hammer 600756 - martello da guerra
È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su 5 lati: era in grado di forare una corazza come altre armi dello stesso genere, le mazze. Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 680mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 1136g.600756 -
Museum Replicas Windlass - Spada della Terza Crociata
La Terza Crociata senza dubbio la pi famosa delle spedizioni in Terra Santa.
Infatti insanguin le terre d'Oltremare dal 1187 al 1192 e sanc la pi violenta collisione tra la guerra santa dei cristiani e la jihad dei musulmani. Tra epiche battaglie e autentici massacri, rivalit intestine e clamorosi errori strategici, and in scena lo scontro tra due figure leggendarie: Riccardo I d'Inghilterra e il sultano curdo Saladino, due nobili guerrieri che combatterono fino all'ultimo respiro una guerra scatenata per cause non sempre nobili. Ancora oggi quel conflitto non cessa di influenzare la storia dell'Occidente e quella del mondo islamico.
Guardia e pomolo sono realizzati in acciaio satinato ed anticato; l'impugnatura in legno ricoperto da morbida pelle nera cucita a mano; la lama, ottimamente bilanciata e temprata realizzata in acciaio ad alto tenore di carbonio: pu quindi flettere per assorbire colpi in tutta sicurezza ed adatta ad essere maneggiata per praticare forme. La spada inoltre accompagnata da un fodero realizzato in cuoio e cucito a mano ed acciaio satinato.
Dimensioni: Lunghezza totale 99cm. - dimensioni lama 82x5cm. - Peso 1130g.5399 -
Museum Replicas Windlass - 1400 War Hammer - martello da guerra
È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su uno dei due lati che va a formare un arma temibile: era in grado di forare una corazza come altre armi dello stesso genere, le mazze.Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 550mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 945g.5415A -
Museum Replicas Windlass - 16th Century Battle Axe - Artigianale
Quest'ascia tipica del 16esimo secolo venne sviluppata come arma contundente dal momento che spade e pugnali avevano ormai perso efficacia contro le corazze a piastre.
Lama: acciaio al carbonio
Impugnatura: legno
Pomolo: -
Guardia: -
Fodero: -
Lunghezza Lama: 22x17cm.
Lunghezza Totale: 63cm.
Larghezza Lama: -
Spessore Lama: -
Peso: 1295g.
Bilanciatura: -5478