Neck Knives: your reliable daily companion
-
ExtremaRatio - N.K.3 Karambit Desert Warfare - Neck Knife - NK3K - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Desert Warfare
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)12636 -
ExtremaRatio - N.K.3 Karambit Stone Washed - Neck Knife - NK3K - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3K-SW -
ExtremaRatio - N.K.3 Karambit Black - Neck Knife - NK3K - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3K-BK -
ExtremaRatio - N.K.3 Desert Warfare - Neck Knife - NK3 - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3-DW -
ExtremaRatio - N.K.3 Black - Neck Knife - NK3 - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3-BK -
ExtremaRatio - N.K.2 Black - Neck Knife - NK2
NK2 is a small knife that extends the family of the Extrema Ratio neck knives.
It differs from the model NK1 for blade tip tanto styled and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or forefinger depending on use. The structure enables both use for very effective cutting work or for small precision work.The quick release Kydex sheath is supplied with paracord for carrying on the neck.
Intended use: Neck Knife
Type of production: Industrial
Production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 50mm.
Blade thickness: 6.3mm.
Total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with Extrema Ratio logo
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK2-BK -
ExtremaRatio - N.K.2 Stone Washed - Neck Knife - NK2
NK2 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK2-SW -
Wander Tactical - Raptor - Satin SanMai CoS & Paracord - PRIVATE COLLECTION - craft knife
Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.
In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted
As in the ancient Japanese Samurai swords.The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
AP-WT-COS-RA-W -
Wander Tactical - Raptor Raw Finish knife - Green Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographedWT-RRA-GR -
Wander Tactical - Raptor Raw Finish knife - OD green Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-RA-BL -
Wander Tactical - Raptor Raw Finish knife - OD green Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-RA-G -
Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife
In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-RP-SM -
Wander Tactical - Raptor Compound Raw Finish - woodland Paracord - custom knife
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-RA-RO -
Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife
In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-COS-RA-O -
Wander Tactical - Raptor Neck Knife - All Black - Paracord - Custom Knife
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Black GunKote
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-RA-B -
Wander Tactical - Tryceratops Neck - Raw Finish and Cherry Brown Micarta - custom knife
"Neck Knife" version with slimmer sheath and tapered grips, to make the knife more comfortable and suited to the neck
Intended Use: Tactical / Collection
Type of production: Custom
Country of Production: Italy
Blade: D2 Tool Steel 59/60HRC
Blade Treatment: RAW
Handle: Micarta Fire
Blade length: 65 mm.
Blade thickness: 5.5 mm.
Overall length: 132 mm.
Balancing: backward
Weight: 176 g.
Sheath: Custom maded OD Black Kydex
Packaging: -
Note: each knife is unique because it is hand maded, could therefore be small differences / inaccuracies respect to the model on pictures.WT-TRT-NE -
Wander Tactical - Raptor - Black Blood & Black Paracord - custom knife
Occupation: Neck Knife / Collection
Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Lama treatment: Black Blood
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: set back
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for Neck Knife use
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-RA-BBBK -
Wander Tactical - Raptor Bronze GunKote & Coyote Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Blade production: Italy
Blade: integral, D2 steel
Blade Treatment: Bronze GunKote
Manicure: Paracord
Blade Length: 80mm.
Blade thickness: 6.5mm.
Total Length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for use with Neck Knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed productWT-R-DP -
Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife
In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-COS-RA-W -
Wander Tactical - Iron Washed - Coyote Paracord - artisan knife
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.12653 -
ExtremaRatio - N.K.3 Stone Washed - Neck Knife - NK3 - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)12450 -
Wander Tactical - Tryceratops Iron Washed and Black Micarta - custom knife
Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Wash
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 125mm.
Balancing: set back
Weight: 196g.
Sheath: in Kydex, thermoformed, with Tek-Lok type connection
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT005