knives new life
-
Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL-CP -
Spyderco - Endura 4 - Half Serrated Black Blade - PRIVATE COLLECTION - C10PSBBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: SportingType of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collectionC10PSBBK-CP -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Roselli - Little Carpenter knife - R140 - handcrafted knife
Finnish handmade hiking knife by Roselli for beginners, scouts and young outdoor enthusiasts. This little knife is designed with safety in mind and its blunt point makes it safe, while the sharp edge is suitable for carving and other difficult woodworking challenges. As the user's skill increases, the point can be sharpened more sharply.
The blade is made of carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: collection/huntingType of production: artisanal
Blade: 60 HRC carbon steel
Blade treatment: -
Handle: arctic birch briar
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: -
Total length: 155mm.
Balancing: -
Weight: 45g.
Closure: -
Clips: -
Sheath: in brown leather
Note: -RO-R140 -
Chris Reeve - Large Sebenza - Classic 2000 Micarta + Leather Sheath - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition, with a few small marks due to time.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small marks due to being placed in the scabbard and the passage of time.
* Box: Present and complete
* Scabbard: Present (not included at the time, but sold separately), original, brown leather, well maintained
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Sportsman
Type of production: Handcrafted
Country of Production: USA
Blade: CPM-S30V 58/59HRC stainless steel
Handle: micro-bead-blasted titanium with Black Canvas Micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 17mm.
Weight: 125g.
Closure: Frame Lock
Clip: removable, in micropallinated titanium
Packaging: December 2006 "Sebenza Classic MM" version - Previously purchased, from private collection - Full set, complete with white cardboard box with Chris Reeve logos and warranty certificates, original leather sheath with Chris Reeve logosCR-LSCMMM-CP -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Gerber - Applegate Fairbairn - Covert Folder Black PVD - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Use: Tactical / Military
Blade: Stainless steel 154CM 58/60 HRC with PVD treatment
Handle: Zytel
Blade length: 95 mm.
Blade thickness: 3 mm.
Total length: 220 mm.
Length closed: 125 mm.
Weight: 115 g.
Clip: stainless steel
Locking system: liner lock with additional safety lockG-AFCB-CP -
Chris Reeve - Small Sebenza Knife - Unique Graphic Black Onyx - BG42 Steel - PRIVATE COLLECTION
Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: CollectionProduction Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificatesCR-SS21APUG -
Chris Reeve - Ti-Lock Stone Washed - NOS Full Set - PRIVATE COLLECTION - folding knife
NOS FULL SET KNIFE, NEW FROM STOCK
* Type: 2001 NOS new old stock - New from stock.
* Condition: Like new, never taken out of original packaging.
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: Cardboard box with Chris Reeve logos, certificates
Notes: Design by Grant and Gavin Hawk - NOS knife, new from stock - Includes box and certificatesCR-TILSW-CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Boker - Bud Nealy MCS Cocobolo Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Neck Knife / CQD
Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new
Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.BO-BNMCS-CP -
Puma - Jagdmesser Falknersheil - Falconer's Knife - 3592 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, improvable
* Marks on blade: No
* Marks on handle: Slight, on nickel silver heads.
* Box: Absent
* Scabbard: Original, leather, with a few small marks due to age.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Particular knife developed with the help of experienced falconers and especially Horst Niesters in the early 1970s.
The blade was designed to chop up food for raptors and to intercept game brought back by raptors during hunting trips. In the center of the blade is a small semicircular notch that serves to signal to the falconer that the edge is sharp from the tip of the blade to that exact point; the rest of the blade is kept blunt to protect the raptors.
PUMA's falconer's knife is designed to be very handy and absolutely practical, making it a reliable companion for hunting prey.
Intended Use: Collection / Vintage / Hunting
Type of production: semi-crafted
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: satin-finished
Handle: wooden, with nickel silver guard and pommel
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 242mm.
Balance: backward
Weight: 130g.
Sheath: leather
Packaging: -
Notes: Vintage 1970s knife - Withdrawn from private collection - Overall in very good conditionPU-FALK-CP -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Rick Hinderer Knives - XM-18 - Spanto 3" Gen II - Black G10 Scales - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small abrasions.
* Marks on handle: Small marks on hardware and clip.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 2mm-thick black G10 glove on 1mm-thick 6AL4V titanium liner. Frame in 6AL4V titanium, billet, 3mm thick with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 178mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: knife from private collection, previously purchasedXM18-3-CP -
Zero Tolerance - ZT0460 - Sinkevich - Bronze Carbon Fiber - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued as of the end of 2021
* Sharpening: Factory sharpened, like new
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: -
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Bronze-colored carbon fiber and Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by SinkevichZT0460-CP -
Spyderco - 1997 Calypso Jr. Experiment PLN Micarta - C52BMP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDC / Collection
Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.C52BMP-CP -
Jim Burke - RockStar Titanium Folder - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available in hard-to-find trade.
* Sharpening: Original
* Marks on blade: no
* Marks on handle: small abrasions on clip.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Type of production: Midtech (semi-industrial)
Country of manufacture: USA
Blade: Stainless steel CPM-154CM
Blade treatment: Dual tone: stonewashed and satin-finished
Handle: stonewashed titanium
Blade length: 80mm.
Blade thickness: 3.2mm.
Length closed: 112mm.
Total length: 195mm.
Thickness when closed: 10mm.
Weight: 130g.
Closure: Framelock
Clip: Removable, titanium
Notes: knife withdrawn from private collectionJB-RF-CP -
ExtremaRatio - BF1TD Black - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.
Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good conditionER-BF1TDBK-CP -
Laguiole Rossignol - Vintage Laguiole Limited Edition Ivory - PRIVATE COLLECTION - Knife
Knife from private collection, presumably early 1980s, in perfect, like new condition with wooden case and numbered certificate of authenticity. Limited edition specimen with serial number #0005 - Checked and certified by our in-house laboratory.
Intended use: collection
Type of production: handcrafted
Country of manufacture: France
Blade: 440A stainless steel
Handle: ivory
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 72g.
Closure: Slip Joint
Packaging: wooden case with numbered certificate of authenticity
Notes: 1980s vintage knife from private collection, in mint conditionLR-AV005-CP -
Spyderco - Endura 4 Flat FRN Gray - PRIVATE COLLECTION - C10FPGY - Knife
Knife withdrawn from private collection - Overall in very good condition, however, the previous owner removed the clip from the knife, a clip no longer present inside the package and therefore not provided - The knife still has the factory sharpening which should be slightly brightened, however - Supplied with original Spyderco cardboard box - Checked and certified by our in-house laboratory.
Intended Use: SportingType of manufacture: industrial
Blade: stainless steel VG-10
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 94g.
Locking system: Back Lock
Clip: -
Notes: knife withdrawn from private collection, clipless, overall in very good conditionSC10FPGY-CP -
Zero Tolerance - Hinderer 566 with 3 handles - ZT0566CF - PRIVATE COLLECTION - knife
Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.
Intended Use: Sporting/Tactical
Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizingCP-ZT566CF -
Spyderco - Native 5 Lightweight Black TiNi - C41PSBBK5 - PRIVATE COLLECTION - Knife
Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: CPM-S35VN Powder Steel
Blade Treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
Notes: -CP-C41PSBBK5 -
Gerber - 425 Hunting Knife - Vintage 1972 - PRIVATE COLLECTION - knife
Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Hunting
Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - UnpackedGE-425HKV -
Cold Steel - Gunsite II - VG-1 Half Serrated - Made in Japan - PRIVATE COLLECTION - 29GLTH - knife
Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/SportsmanType of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steelC29GLTH -
Klotzli - Sailor C Knife Walker design - Titanium - ATS-34 - collection knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself
Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 170mm.
Weight: 74g.
Closure: LinerLock
Clip: in stainless steel, removable
Notes: Design by Michael WalkerAP-KLO-S-W -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Chris Reeve - Large Sebenza 21 knife - 2010 - PRIVATE COLLECTION - knife
* Type: Previously purchased and used
* Condition: In like new condition - manufactured in 2010
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryIntended use: collection/sports
Production type: Mid-Tech
Country of production: USA
Blade: CPM-S30VN 58/59HRC stainless steel
Handle: Micro-shot peened titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesCR-LS21-CP -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Spyderco - DAllara Rescue knife C82SBK - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -C82SBK -
Brian Tighe - Pan knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Thick when closed: 14mm
Balancing: -
Weight: 103g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Note: -BT-PIN-U -
Brian Tighe - Die Dagger knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -BT-DIE-T-U -
Brian Tighe - Tac Tanto knife - craft knife
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collectionBT-CUSTOM -
Spyderco - Native 5 - Maxamet Sprint Run - C41PGY5 - knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint runC41PGY5 -
Dietmar Kressler - Integral Utility blond horn - handmade knife
Intended Use: Collection
Type of production: made entirely by hand
Production Country: Germany
Blade: integral, stainless steel RWL-34 to 62 / 64HRC
Blade treatment: -
Handle: Full, in RWL-34 stainless steel inserts with blond horn
Blade length: 70mm.
Blade thickness: 3mm.
Handle thickness: 7.5mm.
Overall length: 165mm.
Weight: 76g.
Sheath: leather, hand-stitched
Notes: Made entirely by hand by Dietmar F. Kressler12551€0.00Only -50 leftOut of stock -
Max Salice Sanna - Wave - Steel SPG2 sanmai - craft knife
Craft knife produced by the famous Master cutler Italian Salice Max Sanna.
This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.
Intended Use: Collection / Gentleman
Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by MaxFor more information you can view the site sull'accaio used: www.collinisteel.com
max-wave€0.00Only -50 leftOut of stock -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410203 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410980 -
Max Salice Sanna - Goblin - Red Stamina - custom knife
Intended use: Collection / Gentleman
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel ATS34
Treatment Lama: -
Handle: Red Stamina
Blade length: 67mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Total length: 154mm.
Thick when closed: 13mm.
Balance: -
Weight: 55g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - handmade custom knife by Maxmax€0.00Only -99 leftOut of stock -
Deroma - Pattada in Damasco con Bufalo ed Argento 925 - coltello artigianale
Destinazione d'uso: Regionale
Tipo di produzione: Artigianale
Produzione Lama: Italia
Lama: In damasco inox artigianale a 320 strati
Trattamento Lama: -
Manicatura: corno di bufalo con ghiera e rivetti in argento 925
Lunghezza lama: 117mm.
Spessore lama: 3mm.
Lunghezza chiuso: 145mm.
Lunghezza totale: 262mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 102g.
Chiusura: -
Clip: -
Fodero: -
Confezione: -
Note: -9018€532.79Out of stock -
Gilles - Laguiole ram's horn with handmade damascus - knife
These high quality knives are handcrafted according to the tradition of the French cutlery of Thiers which ensures the absence of any manufacturing defect in the context of normal use.
Country of production: France
Blade: hand forged stainless damascus steel
Handle: ram's horn
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 122g.
Locking system: Back Lock
Sheath: brown leather, with belt loop, handmade
Note: each knife is accompanied by a certificate of guarantee with serial number - wooden gift box with Gilles logos2883€401.64Only -50 leftOut of stock -
LoneWolf - Loveless Drop Point Folder - David Yellowhorse Limited Edition
Destinazione d'uso: Sportivo
Tipo di produzione: Impugnatura Artigianale, Lama Industriale
Produzione Lama: Italia by Fantoni
Lama: In acciaio inox 154CM 58HRC
Trattamento Lama: -
Manicatura: Lavorazione artigianale a mosaico, in pietra dura, di David Yellowhorse
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: cofanetto da collezione con loghi Lonewolf, Fantoni e David Yellowhorse; certificati di garanzia
Note: Edizione limitata prodotta in soli 6 esemplari - Design lama by Bob Loveless2795 -
Yuna Knives - EQ 2 Fibra di Carbonio - coltello artigianale
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Paese di produzione: Indonesia
Lama: in acciaio laminato ZDP-189 e ATS-34
Finitura lama: Satinatura
Manicatura: Titanio 6AL4V e fibra di carbonio
Lunghezza lama: 65mm.
Spessore lama: 3mm.
Lunghezza chiuso: 85mm.
Lunghezza totale: 97mm.
Spessore da chiuso: 11mm.
Peso: 62g.
Chiusura: Frame Lock
Clip: Titanio 6AL4V
Fodero: -
Confezione: -
Note: Realizzati interamente a mano da Yuna Knives9020€0.00Only -99 leftOut of stock