knives new life

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory



Intended Use: Heavy Utility

Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand new

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available: Discontinued - the company has permanently ceased operations.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, new and perfect
* Scabbard: Present, like new.
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory


Intended Use: hiking / utility

Production type: Industrial
Country of manufacture: USA
Blade: Fulltang, D2 steel with powder finish
Handle: Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Balance: backward
Weight: 157g.
Sheath: thermoplastic, with TEK-LOK attachment
Notes: knife like new, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory



WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo




Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.

Here are some of the reasons for the WF4 Rough Wolf design.

1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.

2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.

3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.

4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.

s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.

6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.

7. Bevel: it is very high, has impressive penetration capacity.

8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.

9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.

As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.

This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.

PAUL BOZZO

Destinazione d'uso: Tattico

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: CPM-3V Tool Steel
Trattamento Lama: Nitrurazione al titanio
Manicatura: G-10 con lavorazione 3D in colore Green + una coppia di guancette intercambiabili in G-10 in colore Black
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 227g.
Chiusura: -
Clip: -
Fodero: in Kydex, dotato di sistema opzionale e multiposizione PUP (Pals Universal Platform)
Confezione: Busta Trasparente
Note: Edizione Esclusiva e Limitata, non presente nei normali listini e cataloghi Strider, con loghi Monkey Edge incisi

Intended use: Collection / Steak / Sports

Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Loveless Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with ostrich inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)

Blade: 58HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 87mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 172g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli

Blade: 59HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli

The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve

Intended use: Fighter / Tactical

Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranks

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty