Nextorch

NITECORE introduces the new high-performance rechargeable flashlight with AA batteries, the MT2A Pro, the latest addition to the MT series. Thanks to the UHi 20 LED, it can achieve higher brightness and extended range with superior ease of use.

Traditionally, AA flashlights were known for their limited brightness and range, disappointing many users. However, with the UHi 20 LED, the MT2A Pro increases brightness to a staggering 1,000 lumens, a 190% leap from its predecessor, and offers a range of 255 meters, ideal for everyday carry, emergency lighting, outdoor work, and more.

The MT2A Pro comes standard with a rechargeable lithium battery NL1416R with a capacity of 1,600mAh, a continuous discharge current of 5A, and a USB-C charging port. As an additional feature, the flashlight also works with AA batteries, whether alkaline, lithium, or rechargeable, ensuring user convenience in any outdoor scenario. It is suitable for concealed carry with a tube diameter of 17.2mm (0.68") and weighs only 87.6g (3.45 oz) (excluding the clip). The body is precision-machined with CNC processing and features non-slip knurling to ensure a secure grip even with sweaty or wet hands or while wearing gloves.

The MT2A Pro is easy to use with a single rear switch for operation. The U-shaped rear cap is designed to prevent accidental activation with the ability to stand upright. Impressively, it has an IP68 rating for dust and water resistance and can withstand drops from 1 meter.

Powers and durations certified in the laboratory according to ANSI/NEMA FL1 standards using 2x AA 1.2V 2400mAh - under different usage conditions or using different batteries, data may vary.

LED: UHi 20 LED with a lifespan of 50,000 hours
Operating Modes: 3 brightness levels
Powers and Durations with NL1416R battery: 1000 Lumens (1.30h) -> 300 Lumens (2 hrs 45) -> 50 Lumens (20h)
Powers and Durations with 2 AA batteries: 500 Lumens (2h) -> 60 Lumens (11h)
Peak Power: 16500 candela
Maximum Illumination Distance: 255m
Ignition Method: Rear rubber button
Light Selection Method: With the flashlight head unscrewed, turning off and on the rear button
Head: Aircraft-grade aluminum
Body: Aircraft-grade aluminum
Finish: Anodized, Type III
Lens: Ultra-transparent hardened glass with anti-reflective coating
Batteries: Uses NL1416R and 2x AA disposable/rechargeable batteries of 1.2/1.5V
Measurements: 142.8 mm (L) - 19.7 mm (D body) - 2.25 cm (D head)
Weight: 40g - batteries excluded
Accessories: Wrist lanyard, spare o-rings, rubber button, tactical ring
Waterproofing: According to IPX-8 standard, submersible up to 2m depth for 30min
Impact Resistance: Resists drops from a height of 1.5m

BATTERY INCLUDED NL1416R

FULL TECHNICAL SPECIFICATIONS:

LED: 1x Led white light; 1x Led red light, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 350 lumens (3h.) -> 100 lumens (12h.) -> 6 lumens (140h.) -> SOS -> Beacon / Red Light - 5 lumens (40h.) -> Slow Flashing
Range: up to 120m.
Peak power: 3500 candles
Batteries that can be used: 3x AAA 1.2/1.5V ministyl type or Nitecore HLB1300 battery pack (optional, sold separately)
Flashlight dimensions: 59x50x36mm. (with stand included)
Weight: 67g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, reflective in the dark
Notes: water resistant as per IP66 standard
Accessories Included: elastic strap - front mount tilts up to 90° - 3x disposable AAA batteries

TECHNICAL SPECIFICATIONS:

Led: 1x UHi 40 LED with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 3300 Lumens (30min) -> 1200 Lumens (2.30h) -> 300 Lumens (7.30h) -> 50 Lumens (50h) -> 1 Lumens (650h) -> Strobe -> Beacon -> S.O.S.
Peak power: 124300 candles
Maximum lighting distance: 705m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x21700 5300 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (via special adapter not included)
Measurements: 15.3cm (L) - 2.7cm (D shaft) - 4.0cm (D head) - 2.7cm (D tang)
Weight: 130g. without batteries
Accessories: wrist strap, Nylon belt sheath, clip, USB charging cable, 
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

Introducing the NITECORE SRT7i, the latest advancement in the Tactical SmartRing Series. This flagship model represents a breakthrough in the field of tactical flashlights, being equipped with the 4th generation of the Smart Switch, which allows a twist and a push for one-handed control of mode switching and stepless brightness adjustment. This feature makes it particularly suitable for tactical use and immediate response to various situations.

KEY FEATURES:
* Dual tail switches allow for intuitive operation, specifically tailored for law enforcement, hunting and tactical applications.
* Fourth generation of SSR (Smart Selector Ring) technology to quickly and smoothly select brightness levels and operating modes
* Maximum peak beam intensity of 87,500cd and maximum range of 580 meters with maximum autonomy of 800 hours
* STROBE READY™ technology to allow quick access to STROBE mode (patent no. ZL201320545349.4)
* Li-ion battery intelligent charging circuit via USB-C port
* NITECORE 21700i Li-ion battery included (NL2150HPi 5,000mAh)
* Built-in Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
* Break glass on silicon nitride ceramic torch head
* Constructed of aircraft grade aluminum alloy with HA III military grade hard anodized finish
* Waterproof and dustproof grade according to IP68 standard (2 meters submersion) and shock resistant up to 2 meters

TECHNICAL SPECIFICATIONS:

Led: 1x SFT-70 high performance LED, with a life cycle of 50,000 hours
Operating modes: adjustable light output, between 0.1 to 3000 lumens and 1 strobe, electronically regulated
Powers and Durations: 3000 Lumens (3.15h) -> LOW 100 Lumens -> ULTRA LOW 0.1 Lumens (800h) -> Strobe 3000 Lumens
Peak power: 87500 candles
Maximum lighting distance: 580m.
Power-on Method: Back Button and StrobeReady Button
Luminous dial method: Smart Dial Ring and double buttons
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: (included): 1x 21700 3.6V 18W NL2150HPi - also compatible with 2x CR123 3.0/3.6/3.7V using included adapter
Measurements: 16.3cm (L) - 2.54cm (D shaft) - 4.0cm (D head) - 3.1cm (D shank)
Weight: 175g. without batteries
Accessories: NITECORE 21700i Rechargeable Li-ion Battery (NL2150HPi 5,000mAh), CR123 Battery Adapter, Holster, Clip, Lanyard, Spare O-ring, USB-C Charging Cable
Waterproof: as per IP68 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands drops from 2m in height

FEATURES
* High-capacity USB-C rechargeable headlamp with superior performance.
* Maximum power output of 1,400 lumens.
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets that reflect light evenly.
* Built-in 4,000 mAh lithium-ion battery.
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓2A).
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 2 light sources and 3 special modes available.
* Designed with 4 power indicators to inform about the remaining battery charge
* Made of durable PC material with aluminum alloy front housing
* Compact and lightweight
* Impact resistant up to 2 meters in height
* Waterproof and dustproof grade according to IP68 standard

WEIGHTS AND DIMENSIONS
Dimensions: 83.4mm x 48.5mm x 43.9mm (Front Stand Included)
Weight: 146g (Front Stand and Elastic Band Included) / 12g (Front Stand Included)

ACCESSORIES INCLUDED
USB-C charging cable, Front Elastic Band

TECHNICAL SPECIFICATIONS.
LEDs: 2x primary white, 1x auxiliary red, all with a life cycle of 50,000 hours and an illumination radius of more than 100°
Operating Modes: 5 light powers on primary light + 2 special modes; 2 on red light
Powers and Durations Primary White: 1400 Lumens ( / ) -> 600 Lumens (11h.) -> 300 Lumens (16h.) -> 100 Lumens (38h.) -> 8 Lumens (180h.) -> SOS -> Beacon
Peak power: 3800 candelas
Maximum lighting distance: 130m.
Power and luminsa selection method: Two dedicated power, and light selection buttons
Body: plastic material with aluminum unibody front door
Battery: built-in, non-removable, 3.6V Li-Ion 4000mAh battery
Water resistance: as per IP68 standard
Impact resistance: withstands falls from 2m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator - Proximity sensor that automatically switches light output if it detects nearby objects

KEY FEATURES:

* Ultralight AA dual-beam headlamp.
* Maximum power of 240 lumens
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets.
* Compatible with various AA batteries, such as alkaline , Ni-MH and lithium batteries by tolerating different voltages.
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 3 brightness levels, 2 light sources and 3 special modes available.
* Made of special plastic resistant to impact and low temperatures.
* Compact and lightweight
* Shock and drop resistant up to 1 meter high.
* Waterproof and dustproof grade according to IP66 standard





FULL TECHNICAL SPECIFICATIONS:

LED: 1x White light LED; 1x Red light LED, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 240 lumens (4h.) -> 60 lumens (10h.) -> 6 lumens (400h.) -> SOS -> Beacon / Red Light - 5 lumens (10h.) -> Slow Flashing
Range: up to 90m.
Peak power: 1600 candelas
Batteries that can be used: 1x AA type 1.2/1.5V stylus
Flashlight dimensions: 61.5x36.2x28.9mm. (with stand included)
Weight: 36g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, lights up in the dark
Notes: water resistant as per IP66 standard
Accessories: elastic strap - front mount tiltable up to 90° - 360° rotatable multipurpose clip for attachment to various mounts

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

High-performance 18650 battery (8A discharge) specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 3500mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 69.3±0.3mm / 2.73"±0.01"
* Diameter: ≤18.7mm / 0.74"

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Innovative and practical 18650 battery that can be recharged either traditionally or via built-in USB-C port and can also be used as a pocket power bank

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery and pocket power bank.
* Rated voltage: 3.6V / 9.36Wh
* Capacity: 2600mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* USB-C Input and Output: 5V/1A

DIMENSIONS
* Length: 71±0.3mm
* Diameter: 18.6mm±0.2mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of the batteries

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

High discharge power (15A) 21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C, rechargeable directly via built-in USB-C port or via conventional charger

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 74.6 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FEATURES
* Ultra-light dual-beam USB-C rechargeable headlamp weighs only 45g.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock-resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 45g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

Commuter Backpack
The Nitecore BP16 is the backpack for going anywhere and doing anything. Designed for the modern man on the move, the BP16 combines ample interior space with a lightweight and comfortable construction. This backpack can be carried over the shoulder or stored as a convenient carry-on when travelling. Made of durable 500D polyester, this backpack is perfect for any adventure, regardless of the weather. Multiple pockets will keep you organised, including a handy insulated compartment for a snack or drink. An excellent choice for school, commuting or outdoor trekking.

Features
" High-strength 500D polyester fabric
"16 litre large capacity main compartment
" Can hold laptops up to 14 inches long
" Spring strap system for modular extensions
"Multifunctional interior compartments
"Insulated compartment for food or snacks
" Breathable shoulder straps for superior comfort

Measurements

- Number of closable pockets: 5
- Height: 14Cm
- Length: 46Cm
- Weight: 815g
- Width: 29Cm

Key Features
* Dual-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX 
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 65mm x 37mm (5.83" x 2.56" x 1.46")
Weight: 120.4g (4.25 oz) (Charging cable not included)

Key Features.
* Quad-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX / 1,000mA*3 MAX / 750mA*4 MAX
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX / 700mA*3 MAX / 500mA*4 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 105mm x 37mm (5.83" x 4.13" x 1.46")
Weight: 191.4g (6.75 oz) (Charging cable not included)

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

KEY FEATURES:
* Uses a Luminus SFT-40-W LED with a maximum power output of 1,800 lumens.
* Maximum light intensity of 41,000cd and maximum range of 405 meters.
* Glass and dishes with anti-reflective, crystal coating and with PDOT (Precision Digital Optics Technology) treatments.
* Powered by a high-capacity Li-ion 21700 battery and compatible with both 18650 and CR123 batteries to allow constant light for up to 1,500 hours.
* Tactical Mode and Daily Mode functions.
* Rear power button and side metal selection button control 5 different brightness levels and 3 special modes.
* STROBO mode constantly changes frequency randomly to maximize disorientation effects.
* Built-in illuminated potentiometer, located below the Mode button, which indicates the remaining battery charge.
* Built-in potentiometer can indicate the remaining voltage of the inserted battery, with minimal deviation (±0.1V)
* Built-in charging circuits via USB-C port.
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included.
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR temperature regulation technology (Patent No. ZL201510534543.6)
* Electronic protection against battery polarity reversal.
* Optical lenses with scratch-resistant coverage on both sides
* Constructed of solid aircraft aluminum alloy.
* Rugged HAIII type anodization with military specifications.
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Impact and drop resistant up to a maximum of 1m. height


TECHNICAL SPECIFICATIONS:
Led: 1x Luminus SFT-40-W with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 1800 Lumens (0.45h) -> 1050 Lumens (3.15h) -> 260 Lumens (8.45h) -> 45 Lumens (47h) -> 1 Lumens (1500h) -> Strobe -> Beacon -> S.O.S.
Peak power: 41000 candles
Maximum lighting distance: 405m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2150 - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 2.54cm (D head) - 2.72cm (D tang)
Weight: 80g. without batteries
Accessories: NITECORE 21700 Li-ion Rechargeable Battery (NL2150 5,000mAh), USB-C charging cable, Clip, Wrist Corrector, Replacement O-rings, 18650/CR123 battery adapter, NTH10 tactical scabbard
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height


Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

COMPATIBILITY:
Only with the following NITECORE flashlight models: P10i, P10iX, P20i, P20i UV, P20iX, P30i, P35i


DESCRIPTION:
2.4G radio-frequency wireless remote switch to remotely control in ignition and light selection your NITECORE flashlight belonging to the "i" series to be used by replacing the back cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is to be mounted in place of the original flashlight cap and a wireless remote control to be placed via hook-and-loop (provided) or Velcro (provided) to your firearm or wherever you find most convenient within a range of about 1m. so that you can turn on and control your flashlight without the hassle of a cable.

It allows both temporary lighting of the light (light is emitted by pressing and holding the pad, goes out by releasing it) and strobe function via dedicated button; it also allows fixed lighting of the light with subsequent possibility of varying its luninous power.


PACKAGE CONTENTS:
* Wireless back cap
* Wireless remote switch already paired and with batteries already inserted
* Velcro-type strap closure
* Velcro-type hook-and-loop strap
* 2 Picatinny rail mounts

Nylon tactical belt sheath, with magnetic closure, designed to prevent accidental activation while carrying.

Compatibility:
* NITECORE P20i
* NITECORE P20i UV
* NITECORE P20iX

Dimensions:
155mm x 59mm x 50mm.

Material:
Nylon with quick-release rear belt loop and rigid polymer hook

Key Features:
* Powerbank equipped with LED lights with a capacity of 10000 mAh.
* Designed to be used at high altitudes and low temperatures.
* USB-C input/output channel.
* Output of 20W
* Compatibility with PD charging and QC 3.0.
* LED residual power level indicator.
* IPX5 waterproofing.
* Equipped with dual LED emergency flashlight that produces 50 Lumens for up to 30h. continuously


Technical Specifications:
* Capacity: 10000mAh / 3.6V / 36Wh
* Length: 8.9cm
* Width: 4.52cm
* Thickness: 2.26cm
* Weight: 168.5g
* USB-C input:5V⎓2.4A / 9V⎓2A
* USB-C Output:5V⎓3A / 9V⎓2.22A / 12V⎓1.68A

KEY FEATURES:

- Dual-beam, ultra-long distance LEP (laser) laser flashlight.
- Features spotlight and projector with dual lens system to provide a maximum output of 3,000 lumens
- The spotlight uses a class 1 LEP laser light with a maximum output of 410 lumens
- The spotlight uses 6 CREE XP-G3 LEDs with a maximum output of 3,000 lumens.
- Maximum peak beam intensity of 678,000cd and maximum range of 1,650 meters
- Powered by a 21700 i Series battery, but compatible with CR123 batteries, for up to 60 hours of continuous battery life
- Real-time multifunctional OLED display for brightness, range, battery voltage, autonomy, etc.
- Intelligent lithium-ion battery charging circuit, with USB-C charging port
- Highly efficient constant current circuit
- Built-in advanced temperature regulation (ATR) module (Patent No. ZL201510534543.6)
- NITECORE 21700i lithium-ion battery (NL2150HPi 5,000mAh) and RSW2i remote switch (part of cable) included
- Optical lenses with scratch-resistant coating on both sides
- Constructed of aircraft aluminum alloy
- Hardened, anodized, military-grade HA III finish
- Classified to meet IP68 waterproofing standards (2-meter submersion)
- Shock resistance to drops of up to 1 meter

 Laboratory-certified power and lifetime by ANSI/NEMA FL1 standards using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary





LEDs: 6 x CREE XP-G3 LEDs + 1x Class 1 LEP laser, with life cycles of more than 50,000 hours
Operating Modes: 3 operating modes (Flood, Spot and Mix) for a total of 13 different electronically regulated light intensities
Powers and Durations FLOOD: 3000 Lumens (45min.) -> 1000 Lumens (2h.) -> 300 Lumens (6h.) -> 70 Lumens (28h.) -> 10 Lumens (60h.)Powers and Durations SPOT: 410 Lumens (2h. and 15min. ) -> 200 Lumens (3h.) -> 130 Lumens (4h. and 30min.) -> 65 Lumens (8h.) -> 25 Lumens (12h.) MIX Powers and Durations: 3000 lumens (45min.) -> 420 Lumens (2h. and 45min.) -> 130 Lumens (6h.)
Peak power: 678000 candles
Maximum lighting distance: 1650m.
Lighting Method: Rear Button with "Momentary On" system for light signals or by remote control
Light selection method: With the flashlight on, pressing the front "Mode" button or via remote control 
Head: aircraft aluminum 
Body: aircraft aluminum
Finish: anodized, Type III
Lens: optical, with scratch-resistant coating
Batteries: works with a rechargeable 21700 rechargeable "i-generation" battery (NL2150HPi, 5,000mAh) included in the package. If needed, it can also work with 2x CR123 3.0V but without being able to use the Turbo and High powers
Measurements: 18.6cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 296.6g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, RSW2i remote control, USB charging cable, CR123 battery reducer
Water resistance: as per IPX-8 standard, submersible to 2m depth for 30min.
Sheath: cordura, belt-mounted, with magnetic closure
Impact resistance: withstands falls from 1m height




Nitecore Italy warranty: flashlight guaranteed 2 years - Battery guaranteed 12 months

KEY FEATURES:

- Uses a Luminengin G9 LED with a maximum output of 1,500 lumens.
- Maximum peak intensity in the beam of 570,000cd and maximum range of 1,500 meters
- PDOT (Precision Digital Optics Technology) optical system combined with crystal coating.
- Powered by 2 high-capacity Li-ion 21700 batteries providing up to 105 hours of battery life
- Equipped with low battery charge indication via vibration
- Tactical switch on tang and Mode button control 4 brightness levels and 3 special modes
- STROBE mode uses randomly changing frequencies for more effective disorienting effects.
- A power indicator located below the Mode button indicates the remaining battery charge
- Intelligent Li-ion battery charging circuit, with USB-C charging port
- NITECORE 21700 Li-ion batteries included (NL2150 5,000mAh)
- Highly efficient constant current circuit provides stable light output
- Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
- Optical lenses with scratch-resistant coating on both sides
- Constructed of aircraft aluminum alloy
- HA III hardened anodized finish, military grade
- Waterproof and dustproof rating to IP68 standard (submersible to 2m)
- Shock resistant up to 1m in height

 Lab-certified powers and durations by ANSI/NEMA FL1 standards using 2x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary





Led: 1x Luminengin G9 with a life cycle of 50,000 hours
Operating Modes: 4, electronically regulated + Beacon, Turbo and Strobe
Powers and Durations: 1500 Lumens (3.15h) -> 500 Lumens (7h 15min) -> 150 Lumens (25h) -> 18 Lumens (105h) -> Strobe -> Beacon -> SOS
Peak power: 570000 candles
Maximum lighting distance: 1500m.
Lighting Method: Rear Button with "Momentary On" system for light signals or by wireless remote control
Light selection method: With the flashlight on, pressing the front "Mode" button or via wireless remote control
Head: aircraft aluminum 
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: works with 2 rechargeable 21700 rechargeable batteries (NL2150, 5,000mAh) included in the package.
Measurements: 25.6cm (L) - 2.58cm (D shaft) - 6.5cm (D head)
Weight: 245.8g. excluding batteries
Accessories included: 2x NITECORE 21700 Rechargeable Li-ion Batteries (NL2150 5,000mAh), Spare O-rings for watertightness, Wrist Strap, 18W QC 3.0 Travel Power Supply, USB-C Charging Cable, Sheath, RSW2i WL Wireless Remote Control Set (Remote Control, Hooks and Ties, 2x Velcro Attachments, 2x Picatinny Mounts)
Waterproof: as per IPX-8 standard, submersible to 2m depth for 30min.
Sheath: cordura, belt-mounted, with Velcro closure
Impact resistance: withstands falls from 1m height

Nitecore Italy warranty: flashlight guaranteed 5 years - Batteries guaranteed 12 months

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:

Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Titanium alloy
Battery: Built-in 280mAh Li-Ion type, with built-in USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 21.5g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:
Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Stainless steel with PVD surface treatment
Battery: Built-in 280mAh Li-Ion type, with integrated USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 26g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

KEY FEATURES
* Wide light, depth light and auxiliary red light with a maximum output of 2,000 lumens
* Uses 2x Luminus SST-40-W LEDs for both primary white lights
* The reflector uses a specially designed TIR optical lens for long-range illumination to provide a maximum range of 202 meters and a maximum beam intensity of 10,300cd
* The projector uses TrueVision technology for an ultra uniform beam pattern.
* Continuous light variation for both spotlight and projector (Patent No.: ZL201820778007.X)
* Highly efficient constant current circuit provides light output for up to 800 continuous hours.
* Intelligent lithium-ion battery charging circuit equipped with a USB-C charging port
* 180° tilt angle for different lighting needs
* A charge indicator under the "+" and "-" buttons indicates the remaining battery charge.
* Charge indicator can display battery voltage (±0.1V)
* Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
* Constructed of aircraft grade aluminum alloy
* Military grade HA III ultra durable anodized finish
* Waterproof as per IP68 standard (submersible up to 2 meters)
* Shock resistant up to 2 meters high

TECHNICAL FEATURES
LED: 2x Luminus SST-40-W with 50,000 hour life cycle
Output: 13x digitally controlled light output and 3 signaling modes
Powers and duration spot light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 950 lumens (2.30h.) -> 1800 lumens (30*min. - without taking into account automatic temperature control) -> 2000 lumens (Turbo)
Flood light powers and duration: 1 lumen (800h.) -> 45 lumens (28h.) -> 220 lumens (6h.) -> 850 lumens (2.30h.) -> 1400 lumens (30*min. - without taking into account automatic temperature control) -> Beacon -> S.O.S.
Powers and durations auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (160h.)
Range: up to 202mt.
Peak power: 10300 candles
Usable batteries: 1x 18650HP 3.6V (included in the package) or 2x CR123A 3.0/3.7V disposable or rechargeable
Flashlight dimensions: 91.5x34.75x26.5 mm. 
Weight: 70g (without battery)
Lens: TIR type, in shockproof plastic material
Body: aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Included Accessories: 1x Battery 18650 NL1835HP 3.6V and 3500mAh - USB charging cable - elastic front strap - front bracket
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable provided as standard you can provide for charging the battery supplied, the operation is monitored by a special LED light located next to the buttons of selection light. The charging cable can be attached to any PC equipped with USB port or to any wall or cigarette lighter power supply equipped with USB port.
Notes: waterproof and submersible as per IP68 standard - 1750 lumens of power are achievable only by using a battery with a discharge power equal to or greater than 8A (insluded); using different batteries, the maximum power will be limited to 900 lumens.

ANSI/PLATO FL1-2019 standard certified power and duration tested with 1x 18650 HP 3500mAh

Mini organizer made of water-repellent 500D Polyester consisting of a single zippered main compartment (for storing power bank, credit cards, headphones and cables). On the front side it offers 6 M.O.L.L.E. compatible modular webbing/attachments and on the back side it has an aluminum carabiner and a quick release webbing that allows to wear it on the belt or to tie it to other M.O.L.L.E. type webbing.

Material: 500D Water-repellent Polyester
Dimensions: 12.5cm x 7.5cm x 3cm
Carabiner: rear, aluminium
Loop: rear, belt loop, quick release, M.O.L.L.E. compatible

Mini organizer made of 500D water-repellent Polyester consisting of a zippered main compartment (to store cell phones, power bank, headphones, keys and any other bulky gadget) with a small internal net to hold small products; two external side mesh compartments for quick access (for flashlights, cutters, folding knives, multipurpose tools).

Material: 500D water repellent polyester
Dimensions: 16cm x 9.5cm x 8cm
Carabiner: rear, aluminum

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

Green filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a green light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

The Nitecore BP18 is a computer backpack with a robust and practical design perfect for travel or for those who travel frequently. Made from 500D nylon fabric, this backpack is dirt and water resistant, making it perfect for city or rural travel.

The main compartment of the package has a volume of 18 liters and can hold laptops up to 13 inches in length. The BP18 obviously has many other compartments including one for hydration backpacks and a series of internal compartments on the sides for tools or valuables.

This pack also features a tactical-style MOLLE texture that allows users to customize their carrying experience with compatible gear and backpacks.

Notable features
»500D nylon fabric resistant to wear with dirt and water resistant
"18 liter large capacity main compartment
»Can hold laptops up to 13" in length
»Molle belt system for modular extensions

Dimensions
16cm (L) x 24cm (W) x 47cm (H)

Weight
Approx. 710g / 1.6lbs

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

Key Features

Triple output USB-C rechargeable headlamp, made of solid metal
It uses a Luminus SST-40-W primary LED with a maximum output of 1,750 lumens
Equipped with two auxiliary lights: one white with high CRI (CRI≥90, Color temperature: 4500K) and one red
Unibody lens of TIR type to emit a uniform and soft light
Maximum light intensity of 7,000cd and maximum range of 165 meters
The highly efficient constant current circuit provides stable light output for up to 800 hours
Built-in Li-ion battery charging circuit, via USB-C port
180 ° adjustable tilt angle for various lighting needs
The indicator under the switch indicates the remaining battery charge (Patent ZL201220057767.4)
The indicator also indicates the battery voltage (± 0.1V)
Built-in advanced temperature regulation module (ATR) (Patent ZL201510534543.6)
Constructed from aircraft grade aluminum alloy
Tough anodized finish, military grade HA III
Classified as waterproof and dustproof as per IP68 standard (submersible up to 2m)
Shock resistant up to 2 meters high

LED: 1x Luminus SST-40-W with a lifespan of 50,000 hours
Output: 8x constant light output, digitally regulated and 3 signaling modes
Power and duration of main white light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 900 lumens (2.15h.) -> 1750 lumens (30 * min. - without holding account of automatic temperature adjustment) -> Beacon -> SOS
Powers and durations of the auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (57h.)
Powers and duration of auxiliary white light: 24 lumens (42h.)
Range: up to 165mt.
Peak of power: 7000 candles
Usable batteries: 1x 3.6V 18650HP (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 90.8x34.7x26.9 mm.
Weight: 65.5g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Accessories included: 1x 3.6V and 3500mAh 18650 NL1835HP battery - USB charging cable - front elastic strap - front bracket - spare rubber button - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.
Notes: waterproof and submersible as per IP68 standard - the 1750 lumens of power can only be obtained using a battery with discharge power equal to or greater than 8A (included); using different batteries, the maximum output will be limited to 900 lumens.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 HP 3500mAh

KEY FEATURES

* It uses two main LEDs 1XCREE XP-G3 S3 (3000K) Spotlight (from depth) and 1xCREE XP-G3 S3 (5700K) Floodlight (ambient), usable individually or combined and two small central auxiliary red light LEDs.

Maximum output power 520 lumens with depth about 103 meters
* Polymer torch body
* The torch consists of a double parabola (front) which guarantees a double possibility of illumination;

Parabola CREE XP-G3 S3 (3000K) Spotlight with 3 levels: 520 lumnes - 400 lumens (6 hours) - 100 lumens (10 hours)
CREE XP-G3 S3 dish (5700K) Floodlight with 2 levels: 200 lumens (8 hours) - 55 lumens (13 hours)

Central red LEDs: 16 lumens (6 hours)

* Maximum light intensity of 4120 cd and maximum range of 128 meters
* Powered by both USB-C Nitecore HLB1300 Rechargeable Li-ion Battery (included), and 3 AAA batteries
* Double button on, off and adjustment
* Wide 90 ° lighting angle, specially designed for hiking and sporting activities
* Elastic front band included, light and breathable
* Electronic protection against battery polarity inversion
* Made of ABS
* Submersible as per IP66 specifications
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

Battery (included): Nitecore HLB1300 Rechargeable Li-ion Battery USB-C rechargeable battery
Torch dimensions: 54.9x398.6x28.3mm.
Weight: 82.5g (flashlight only, without batteries, headband and holder for front use)
Lens: micro-blasted hardened glass
Body: ABS
Notes: water resistant as per IP66 standard.
NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

The Nitecore TIKI UV is a very light (12 grams) and compact (5.5 cm) rechargeable keychain flashlight with a maximum power of 1000 mW 365 nm of UV ultraviolet light.

In addition to the main LED there are two additional white light situation LEDs in the body of the TIKI

UV
High: 1000 mW - 1 hour of autonomy
Low: 180 mW - 2 hours of autonomy

AUX white
High: 70 lumens - 30 minutes of autonomy
Low: 35 lumens - 1 hour of autonomy
Flashing: 35 lumens - 11 hours of autonomy

Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12 g. - battery included
Accessories: steel ring for hooking to the key ring
Water resistance: as per IP66 standard, it resists dust, water and light immersions
to impacts: withstands falls from a height of 1m
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) standby for a whole year!

Portable, foldable and waterproof 100W solar panel, compatible with Nitecore NPS series Power Station.

Monocrystalline silicon panels, with cell efficiency of 23%: over 60% more efficient than conventional solar panels. Can convert energy steadily even on extremely cloudy days.

With a constant solar source, the FSP100W offers unlimited power in outdoor environments, especially when compared to Nitecore's NPS series of portable generators that can be recharged in 2 to 6 hours.

Lightweight (2.6kg) and compact (38.5x30x4.5cm when closed), it is very convenient to store and transport thanks to the integrated handle.

It withstands the harsh environment thanks to its laminated ETFE unibody structure that offers easy maintenance and IPX5 waterproof certification. The high-density outer fabric is also designed to provide excellent waterproof qualities.

TECHNICAL SPECIFICATIONS:

Model: SPF100W
Dimensions: Open: 60.6cm x 129.4cm x 0.5cm
Folded: 38.5cm x 30cm x 4.5cm
Weight: 2.6kg
Number of Panels: 8
Cell Efficiency: 23% (lab tested)
Operating Current: DC Output 5.6A
Operating Voltage: DC Output 18V (MAX)
Total Output Power: 100W (MAX)
Output port: 7.9 x 5.5mm customized DC output port

Flashlight designed for operational use (law enforcement, security institutions, patrol vehicles) and abitatibo equipped with magnetic induction charging or via USB-C cable - Comes with a base of support charging, a wall mount charging, a USB cable and a car socket for cigarette lighter so you can recharge in any situation.

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Strobe, S.O.S. and Beacon Light
Powers and Times: 1000 Lumens (2.15h) -> 420 Lumens (5h) -> 200 Lumens (11h and 30min.) -> 50 Lumens (38h.) -> 1 Lumen (1200h.) -> Strobe -> Beacon -> SOS
Peak power: 67700 candles
Maximum lighting distance: 520m.
Lighting Method: Front Power Button
Light selection method: Front light selection button
Head and body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: included 1x rechargeable battery NL2150DW 3.7V 5000mAh; not compatible with different types of batteries
Measurements: 15.9cm (L) - 4.0cm (D barrel) - 4.0cm (D head)
Weight: 211g. - excluding batteries
Accessories: magnetic induction charging base - magnetic induction wall charging station - USB cable - cigarette lighter cable - mains transformer - spare o-ring - wrist strap
Waterproof: as per IP68 standard, submersible to 2m depth for 30min.
Impact resistance: it resists falls from 1m height

Power and duration certified in laboratory by standard ANSI/PLATO FL 1-2019 using 1x 21700 3.7V 5000mAh - under different conditions of use data may vary

Key Features
- Uses a Luminus SST-40-W LED with a maximum power output of 1,400 lumens
- Uses an orange peel reflector dish to even out the light beam produced
- Maximum peak intensity of 6,700cd and maximum illumination distance of 163m
- Uses a reflection system to illuminate blind spots at foot height
- Selector button that controls 4 brightness levels and an emergency blinker
- Rechargeable NITECORE 21700 Li-ion battery included (NL2150R 5,000mAh)
- Integrated ATR (Advanced Temperature Regulation) system for temperature regulation
- Constructed of aircraft-grade aluminum with anodized barrel and military-grade HA III finish
- Bike mount included
- Dust- and water-resistant to IP68 standards (submersible to 2m)
- Withstands impacts up to 1m high
- Warranty 5 years, official product NITECORE ITALY

Power and duration tested in laboratory, as per ANSI/PLATO FL 1-2019 standard

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 4 operating modes + emergency flashing
Powers and durations: 1400 Lumens (2.30h. at 163m.) -> 430 Lumens (3.15h. at 91m.) -> 170 Lumens (12h. at 50m.) -> 28 Lumens (60h. at 20m)
Maximum lighting distance: 163m.
Lighting method: Power and mode selection button
Light selection method: + and - buttons to vary the light output
Head and Body: Aeronautical aluminum with plastic front flange
Finish: HA III type anodization
Lens: Hardened glass with anti-reflection treatment
Batteries: included 1x 21700 rechargeable 3.7V and 5000mAh (compatible with 1x 18650 and 2x CR123A)
Measurements: 148.6mm (Length) - 25.4mm (Drum diameter) - 30.0mm (Head diameter)
Weight: 76g. - Battery and bike mounts not included
Accessories: Universal quick release bike mount, MicroUSB charging cable, hand strap, CR123A battery adapter
Waterproof: as per IP68 standard, submersible up to 2m. depth
Notes: rechargeable by removing the battery and recharging it via USB-C plug on the head of the battery itself

Key Features:

* Ultralight powerbank with a capacity of 20000 mAh.
* Carbon fiber chassis and panels
* Three channels of USB and USBC output
* LED residual power level indicator
* Low current charging mode for delicate electronics (Ex. Smartwatch, TWS headphones etc.)
* It is 27% lighter and 57% smaller than a traditional 20,000mAh powerbank

Technical Specifications:

* Capacity: 20000mAh / 3.85V / 77Wh
* Length: 13.63cm
* Width: 6.0cm
* Thickness: 2.14cm
* Weight: 324.50g
* USB-C Input (INPUT): 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A (18W MAX)
* USB-C (IN) Input: 5V⎓2.4A / 9V⎓3A / 12V⎓2.5A / 15V⎓2A / 20V⎓1.5A (30W MAX)
* USB-C (OUT1): 5V⎓2.4A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓2.25A (45W MAX)
* USB-A (OUT2/OUT3): 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
* Multi Ports: 5V⎓3A(MAX)
* Waterproof: IPX5

Never let your phone or flashlight die!
The Nitecore NB20000 power bank has an amazing 20,000 mAh battery that can charge almost 7 times an iPhone 12. Using the usual carbon fiber chassis, the NB20000 is 27% lighter and 57% smaller than traditional power banks, with a sleek, modern, minimalist design. The NB20000 is the ultimate portable backup charger for road warriors, outdoor enthusiasts who enjoy trail running, hiking and camping or first responders who are on an extended search and rescue mission. It's also a great addition to your emergency preparedness kit.

Ready for any challenge!
Quick Charge USB/USB-C output ports allow you to quickly charge three devices at once with maximum compatibility with all electronic devices. When quick charging isn't needed, the NB20000 has a low-current mode for delicate devices like Bluetooth headsets and smartwatches.

Lightweight and rugged!
The carbon fiber exterior panel makes NB20000 highly resistant to damage, abrasion and impact. In addition, NB20000 is water resistant with IPX5 rating and comes with a number of short circuit, overload and overheating protections.

WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Light with strong spot - Integrated UV light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:
- Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
- UV light uses 4 x UV LEDs (320mW, 365nm wavelength)
- Glass and dishes with anti-reflective, crystal coating and PDOT treatments
- High-efficiency circuits to allow constant light for up to 50 hours continuously
- Dual rear power and selection buttons, quick and intuitive, designed for tactical applications
- STROBE READY technology that enables instant access to STROBO light
- STROBE light continuously varies randomly in frequency to increase disorientation effect
- Possibility to change the mode of use between Tactical Mode and Daily Mode
- Integrated charging system for Li-ion batteries via USB-C port
- NITECORE 21700 Li-ion battery included
- Impact-resistant silicon nitride front crown for excellent emergency glass-breaking capabilities
- Integrated ATR temperature control system
- Optical type lenses with anti-scratch coverage on both sides
- Made of anodized aircraft aluminum alloy with military grade HA III finish
- Waterproof as per IP68 standard (Submersible to 2 meters depth)
- Withstands impacts up to 2 meters high

Laboratory certified power and lifetime as per ANSI/NEMA FL1 standard using 1x 21700i 3.7V 4000mAh - under different usage conditions or using different batteries, data may vary

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 3, electronically controlled + Strobe
Powers and Times: 1800 lumens (1h 45min.) -> 250 Lumens (8h 30min) -> 35 Lumens (38h) -> UV 320mW (30h) -> Strobe 1800 lumens
Peak power: 28500 candles
Maximum Lighting Distance: 337m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2140i, 4,000mAh - included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power.
Measurements: 15.0cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 124g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: thermoplastic, rigid, for quick deployment of the flashlight
Impact resistance: it resists falls from 1.5m height

P30i hunting torch with GM02MH magnetic attachment

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated button + Warm white light + Warm white light flashing + Ultraviolet
Powers and Durations: 300 Lumens (0.30h.) -> 60 Lumens (1h.) -> 15 Lumens (4h.) -> 1 Lumen (40h.) -> UV -> CRI light -> CRI flashing
Power peak: 1260 candles
Maximum illumination distance: 71m.
Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12g. - battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light immersions
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package)

The Tiki GITD will glow green in the dark after it has been illuminated by UV light.

WHY CHOOSE:

Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Wide beam light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head.
* Rechargeable NITECORE 21700 battery (NL2150i, 5,000mAh) included in the package.
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide-range light with a central brightness of 12200cd. and a maximum range of 221 meters.
* Glasses and parabolas with anti-reflection treatments, crystal coating and with PDOT (Precision Digital Optics Technology).
* Frontal tungsten carbide glass breaker
* Integrated potentiometer with indicator light showing the remaining battery charge and voltage remaining.
* Constructed of solid aircraft aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LEDs: 4 CREE XP-L2 V6 LEDs with a 50,000 hour life cycle
Operating Modes: 6, electronically controlled + Strobe
Powers and Times: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 12200 candles
Maximum Lighting Distance: 221m
Lighting method: Rear button with "Momentary On" system for light signals and Rear "Mode" button for immediate access to the strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2150i, 5,000mAh - included in the package). If necessary it can also work with 2x CR123 3.0V but stopping at 1060 lumens of power
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 116g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Scabbard: thermoplastic, rigid, belt-mounted
Impact resistance: resists falls from 1.5m height

Original Nitecore remote control to be used by replacing the rear cap of your flashlight; ideal to be used with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is mounted in place of the original cap of the flashlight and a removable remote cable that attaches via USB-C plug. Once plugged in, it allows both the temporary switching on of the light (the light is emitted by pressing and holding the pad, it turns off by releasing it) and the strobe function through a dedicated button; it also allows the fixed switching on of the light with the subsequent possibility to vary its light power.

On the back, the aluminum cap has also a standard integrated power button that allows to use the flashlight normally (on and off), but that does not allow to select the light power or the STROBO light.

Diameter cap: 28.6mm
Total cable length: 307mm

Compatible only with models

P10i, P20i and P30i

Key Features:
* Ultralight powerbank with 10000 mAh capacity.
* IP68 waterproof, submersible to a depth of 2m and resistant to shocks and drops up to 1m in height.
* USB output channel with additional security mechanism for Nitecre headlamps
* LED residual power level indicator
* Operates in temperatures below -10°C / 14°F
* Weighs only 215 grams and is super compact, so you can take it anywhere.

Technical Specifications:
* Capacity: 1000mAh / 3.64V / 36.4Wh
* Length: 10.54cm
* Width and Thickness: 5x2.8cm
* Weight: 215g
* Micro USB Input: 5V-2A
* USB-A Output: (Single Port) 5V-2.4A / 9V-2A / 12V-1.5A - (Dual Port) 5V-2.4A (18W Max)

Supported Protocols:
* QC2.0/QC3.0 Output
* FCP/AFC/SFCP Input & Output
* MTK PE+1.1&2.0 Output
* BC1.2, Apple, Samsung Fast Charging

Perfect companion for extreme adventures!
Small, compact, lightweight and rugged, it's designed to follow you on every adventure. Thanks to the IP68 certification, it can withstand any environment, from the dustiest to the most humid, even going underwater up to 2 meters deep! Take it with you on your high altitude adventures, it can withstand extreme temperatures down to -10°C!

Designed for Nitecore headlamps!
Thanks to the integrated metal hook fully compatible with the new Nitecore headlamps - such as the HU60 - it allows a quick, safe and constant coupling between the headlamp and the battery pack so you'll never run out of light when you need it, even the most frantic!

*** WARNING: NOT COMPATIBLE WITH APPLE iPHONE ***

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

Very light and capacious waist bag designed mainly for runners and for those who practice outdoor sports; it can hold soft water bottles, powerbanks, cell phones, wallets and small items such as house keys and flashlights.

Breathable, soft, non-slip, universally adjustable through Velcro, it has compartments fixed both by zipper and elastic cords. Fits diameters from 85cm to 120cm.

Features and Materials:

- Made of lightweight and breathable 70 denier Cordura Nylon.
- Non-elastic, to prevent belt slippage
- Designed for everyday use or hiking
- Quick-access main pocket secured by elastic cord
- Inside pocket closed by a high quality YKK zipper
- External reflective parts for increased safety and visibility
- Ability to attach textiles, t-shirts or towels to elastic cords
- Highly adjustable Velcro waistband
- Fits from 85cm to 120cm in diameter
- Weighs only 80g
- Dimensions of 40x11,5cm.