Nitecore

Accessory for Nitecore tactical flashlights made of aeronautical aluminum with HA III type military anodization, it is compatible with any flashlight that has a 1 "(2.54cm) diameter barrel.

Compatible with Picatinny rails, it has dimensions of 71mm (height) x 30mm (width) x 31mm (length) and a weight of 73g.

* Easy to attach and remove
* Central fixing screw that does not require tools
* Compatible with 1 "/ 2.54cm cylindrical shaft flashlights

Led: 1x Cree XP-G3 S3 - with a life cycle of 50,000 ore
Modi Operativi: Ambidextrous pulsation for an easy access to the 3 luminous functions - Prize and one of the lateral pulsation for accessing the momentary tattic modality (Momentary-On), briefly award one of the pulsating for accessing the constant lighting modality (Costant-On) , premi three turn one of the pulsating for the Strobe modality (Strobe-On), using frequency strobe non-linear for effetti vertiginosi più forti.
Potenze e Durate: 460 lumens (0.3h) 40 lumens (3h45min) - Strobo 300 lumes
Picco di potenza: 1440 cd
Distanza di illuminazione massima: 76m.
Metodo di accensione: doppio interruttore, ambidextrous, posto ai lati della torcia
Metodo di variazione luminosa: doppio interruttore, ambidextrous, posto ai lati della torcia
Testa: aeronautical aluminum
Corpo: aeronautical aluminum
Finitura: anodized, Type III
Lens: ultra-transparent indurito vetro with anti-reflective treatment
Batterie: works with a CR123A battery (included in the package)
Misure: 6.4cm (Lunghezza) - 3.6cm (Larghezza) - 3.3cm (thickness, slitta included)
Weight: 89.6g. with inserita batteria
Accessori: o-ring
Waterproofing: comes standard IP67
Resistenza agli impatti: withstands expiry of 1m. say altezza
Note: Slitta di aggancio universale fast, compatible with Picatinny and Weaver systems

Designed exclusively for Nitecore i4000R torches and Nitecore lighting systems of the 21700i series

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Flat and present on the lower and upper part of the flashlight
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
works only with NITECORE i4000R torches and NITECORE 21700i series lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

Designed for high power torches and devices that require a high amperage in the continuous discharge phase.

The new Nitecore NL2150HPR is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C type charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to an available USB power source (for example to a PC or a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be complete.

Alternatively, these batteries can be charged normally, like any rechargeable battery, ie using any external charger compatible with 21700 Li-Ion batteries.

Equipped with built-in intelligent charging circuits and other safety features, this battery operates safely while following the precautions listed.

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

USB Charging Voltage: 5V
USB Charging Current: 5A (Max)

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
recommended for the NITECORE E4K model

Led: 2x Osram P8 with a life cycle of 50,000 hours and with a lighting diameter of 100 °
Operating Modes: 4 light powers, selectable with the dedicated button
Powers and Durations: 700 Lumens (15min.) -> 180 Lumens (1.30h.) -> 30 Lumens (8h.) -> 1 Lumen (50h.)
Power peak: 2100 candles
Maximum illumination distance: 74m.
Ignition method: Front on / off button
Light selection method: Front light selection button
Body: aviation aluminum with HA III anodizing degree
Batteries: Li-Ion, included, non-removable, equipped with an integrated MicroUSB type charging system
Measurements: 6.0cm (Length) - 2.45cm (Width,) - 1.38cm (Thickness)
Weight: 26g. - battery included
Accessories: double steel ring for hooking
Waterproofing: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable not included in the package); during charging, an integrated LED will show the status and will automatically turn off when charging is complete. The charging system automatically prevents undervoltage, overvoltage and has an integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, resists traction of up to 30 kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL1-2019 standards

NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.

Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.

Type of production: industrial
Country of production: China

Functions:

* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriver

Material: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5g

You can recharge it normally, inserting it in a charger or recharge it like a mobile phone: inserting a USB-C cable!

The new Nitecore NL2150R is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to a available USB power source (for example to a PC or to a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be completed.

Alternatively, these batteries can be charged normally, like any rechargeable battery, i.e. using any external charger compatible with Li-Ion 21700 batteries.

Equipped with integrated intelligent charging circuits and other safety functions, this battery works in complete safety respecting the precautions indicated.

 
BATTERY CHARACTERISTICS
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* USB charging voltage: 5V
* USB charging current: 5A (Max)
* Positive pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltages and 4.25V overvoltages

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not reload on carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for incorrect use or with inverted polarity of the batteries

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Model: ZWXTD-02
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

Original Nitecore remote ignition control to be used by replacing the rear cap of your flashlight; ideal for use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary switching on of the light by pressing the special remote rubber pad; the light will go out as soon as the pressure on the pad is stopped. It also integrates a standard power button on the side which allows the torch to be used normally.

Cap diameter: 28.6mm
Total length: 307mm

Compatible only with models:

NEW P12 - NEW P30

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x Red LED + 1x Blue LED
Operating Modes: 4 light powers, selectable with the specific dedicated button + Red Light + Blue Light + Flashing Red / Blue
Power and Durability: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> Red Light -> Blue Light -> Red / Blue Flashing
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m in height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional red light - Additional blue light

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m. of height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRI

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Green filter made of ultra-transparent hardened glass with rubber body, so that it can be adapted to different types of torches with 70mm diameter heads.

This filter transforms the beam of your torch into red light suitable for hiking, outdoor and for hunting purposes since it does not scare and alert the animals. Also suitable for tactical reading of maps and various documentation.

Compatibility: only for NITECORE MH40GTR

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GTS, MH25GTS, P12GTS

Urban / hiking backpack made of Nylon 600 denier, very light and resistant, also designed to accommodate electronic devices and laptops up to 14 "

Features and Materials:
- 600 denier Cordura Nylon resistant to water and abrasion
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for intensive use
- Main compartment and front compartment both with full zip opening
- YKK hinges of Japanese production
- Ventilated backrest
- Reinforced handle and stitching
- Possibility of being used with a shoulder strap, a single shoulder, a handle or anchored to a trolley
- Quickly and easily adjustable shoulder strap detachable
- Front compartment with document holder and hooks for hanging keys
- Dimensions main main compartment: 40x25x7.5 cm.
- Front compartment dimensions: 33x20x2 cm.
- Weight: 0.95 kg.

Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.

* Weight: 25g
* Total length: 142mm.
* Material: aluminum alloy
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Fisher PR4 Refill Schneider Gelion 39.

Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.

* Weight: 36g
* Total length: 142mm.
* Material: titanium
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Refill Schneider Gelion 39.

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - MAX STERILIZING SURFACE 100m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, and molds through light, DNA or RNA and therefore prevents them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Models: ZWXTD-04
* Body material: steel
* Lamp material: quartz
* Rated power: 75W
* Sterilizable surface: <100m²
* Operating voltage: 220V / 50Hz
* Lamp dimensions 75W: 200x665 mm.
* Lamp weight 75W: 1380 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

The Nitecore NCP30 tactical sheath is a robust, multifunctional product, ideal for torches and multipurpose.
The scabbard also offers a small side compartment for carrying pens and penlights.
Made of 900D Cordura Mil-Spec Nylon, the ncp30 sheath can be easily mounted on a belt or
other MOLLE systems.

Compatible torch models:
EA21 EC20 EC25 MT25 MT2C MT20C MT06 P20 P20UV P10 P12 SRT5 MH2C MH10 MH12

Measurements:

Item weight: 54.4 g
Product dimensions: 8.4 x 4.3 x 2.5 cm

Diffusore luminoso in materiale plastico robusto, durevole, anti-urto e resistente ad alte e basse temperature da fissare sulla testa delle torce Nitecore con testa di diametro di 4cm.

Questo diffusore trasforma la vostra torcia in una pratica bacchetta di segnalazione; la luce arancione è ottima per segnalare situazioni di emergenza o per un uso professionale di controllo del traffico.

Materiale: plastica PC2805 realizzata da Bayer Material Science AG
Lunghezza: 18cm
Diametro: 3,95cm

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC

The NITECORE NL1475R is a 750mAh 14500 micro-USB rechargeable battery that's compatible with multiple 14500 flashlights, headlamps and other electronic powered devices. No charger is needed to recharge this battery, it's equipped with a built-in micro-USB port that allows users to charge the battery directly using any compatible USB power source. Yet, the battery does have the ability to recharge using a traditional charger providing multiple recharge options for users. The NL1475R is equivalent to 500 pairs of non-rechargeable batteries and has a life span of over 500 recharge cycles, helping to reduce the cost of energy to users over time. 

The battery boasts multiple external safety mechanisms like a microporous barrier to defend internal components and a pressure relief valve to protect against rapid temperature increases and explosions. A built-in high-performance protection circuit protects the battery from overcharging, over discharging and short-circuiting to prevent damage and prolong battery life.

NITECORE NL1475R Specifications

• Battery Type: 14500
• Capacity: 750mAh
• Output: 2A
• Voltage: 3.6V
• Length: 1.95" (49.5mm)
• Diameter: 0.56" (14.2mm)
• Weight: 0.66oz (18.6g)

NITECORE NL1475R Features

• Integrated micro-USB charging port
• Compatible with traditional battery chargers
• Pressure relief valve protection for rapid temperature increases
• Microporous barrier to protect internal components
• High performance protected circuit automatically protects against overcharge, over discharge and short-circuiting
• Nickel-plated stainless steel protectors
• Certified by International Standards

Package Contents: NITECORE NL1475R 750mAh 14500 Micro-USB Rechargeable Battery

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.6V
* Capacità: 3500mAh - 8A
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V

PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA

* Capacità: 3500mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 47g
* Voltaggio nominale medio: 3.6V
* Voltaggio di picco: 4.2V
* Potenza: 8A
* Cicli vitali: > oltre i 500 cicli

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 6000mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A
* Dimensions: length of 75.4mm +/- 0.3mm - diameter of 22mm +/- 0.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile anche con modelli di altre marche con fusto di diametro di 1" / 2.54cm

Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico.
- Materiali: alluminio aeronautico anodizzato
- Misure: 50mm lunghezza x 65mm altezza
- Diametro utile torcia: da 24mm a 27mm

The new Nitecore NL1834R 18650 battery is a revolutionary battery designed with a built-in micro-USB charging port making charging easier than ever! No more need for an extra charger as this battery can be charged directly using a standard micro-USB charging cable (sold separately). Simply plug the battery into an available power source and a red indicator light under the + pole will turn green upon completion. Alternatively, these batteries can still be charged on an external charger if desired. The NL1834R batteries are designed for powering high drain devices such as high-output flashlights, lanterns, headlamps, and bike lights, as well as a variety of other appliances and devices. With built in smart charging circuitry built and other integrated safety features through-out, this battery will safely work in the majority of button-top compatible devices.

Features & Specifications:
Type: Nitecore NL1834R 18650 3.7V Protected Li-ion rechargeable battery
Capacity: 3400mAh
Voltage: 3.7V
Output: 12.24Wh
USB Charging Voltage: 5V
USB Charging Current: 800mA (Maximum)
Chemistry: Lithium-ion
Weight: 1.52oz (47.3g)
Length: 2.68in (68mm)
Diameter: 0.72in (18.3mm)
Protected: Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V
Recharge: up to 500+ cycles
Red & Green charging indicator LED's
Microporous barrier and pressure release valves help protect the battery and prevent damage caused by rapid expansion & combustion
12 Month Warranty Period

Il caricabatterie Intellicharge i8 EU è universale, intelligente ed ultra rapido. Riesce ad identificare automaticamente che tipo di batteria avete inserito: Litio (LiFePo4, IMR o Li-Ion come le CR123A, le 18650 o le 14500) o Alcaline (Ni-MH e Ni-Cd come le stilo AA o ministilo AAA e mezze torce C) ed applica autonomamente la corretta tensione di carica ed il corretto voltaggio. Ognuno degli 8 slot di ricarica è gestito indipendentemente da un microprocessore capace di monitorare le batterie. Il sistema ottico di carica aiuta inoltre a tenere tutto sotto controllo indicando sia la percentuale di carica raggiunta che la carica terminata.

Semplicissimo da usare: basta inserire la batteria, al resto pensa a tutto lui!

Caratteristiche:
* Carica da 1 a 8 batterie simultaneamente
* Ogni slot di ricarica è indipendente
* Identificazione automatica del tipo di batteria inserita
* Identificazione automatica del voltaggio
* Identificazione automatica del tipo di carica (CC, CV e TC)
* LED a colori per monitorare il progresso di carica
* Spegnimento automatico della carica al completamento
* Protezione contro l'inversione di polarità
* Dissipazione del calore ottimale
* Utilizzabile sia su rete fissa che con presa accendisigari da auto (non inclusa)
* Certificazioni CE e RoHS

Specifiche Tecniche:
* Voltaggio Input: AC110-220V 50/60HZ o DC 12V 3A
* Potenza Input: 30W
* Output Voltaggio: 4.2V / 1.48V
* Output Corrente: 1500mA x 1/2 slot - 1000mA x 3/4 slot - 750mA x5/6 slot -  500mA x7/8 slot
* Dimensioni: 117x101x134.50 mm.
* Peso senza batterie: 488.2g.
* Compatibile con batterie IMR / Li-Ion: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650
* Compatibile con batterie Ni-MH / Ni-CD: AA, AAA, C, D

Precauzioni:
* Non ricaricare tipi differenti di batterie oltre a quelli indicati
* Non lasciare incustodite le batterie durante le operazioni di ricarica
* A batterie cariche, togliere le batterie dal caricabatterie prima di estrarre la presa elettrica per prevenire lo scaricamento delle batterie stesse

Pratica borsa in Cordura, leggera e resistente, pensata per riporre e trasportare torce a LED, coltelli chiudibili, coltelli multiuso e pinze multiuso oltre a chiavi, portafogli, oggetti elettronici etc.

Utilizzabile sia a maniglia, che a tracolla, che tramite attacchi compatibili MOLLE. - Offre due capienti vani compartimentati chiusi indipendentemente con zip.

Caratteristiche e Materiali:

- Cordura Nylon a 1000 denari resistente all'acqua e alle abrasioni con parti in velluto sintetico
- Trattamento esterno per tessuti che assicura resistenza allo sporco e facilita la manutenzione
- Pensata per un utilizzo quotidiano o per escursioni
- Tasche a scomparti per permettere l'alloggiamento di differenti utensili
- Interno morbido per proteggere gli utensili ospitati
- Elastici interni in Nylon per modulare al meglio gli utensili ospitati
- Operatività completa da ambidestro
- Sistemi posteriori di aggancio tipo MOLLE, in nylon ad alta resistenza
- Maniglia con grip rinforzato
- Tracolla in Nylon regolabile
- Pesa solamente 300g
- Comparto frontale di 17x15x2cm
- Comparto posteriore di 22x16x4cm

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

Filtro verde realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.6V
* Capacità: 3500mAh - 12.6Wh
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V

PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA

* Capacità: 3500mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 47g
* Voltaggio nominale medio: 3.6V
* Voltaggio di picco: 4.2V
* Potenza: 12.6 Wh (watt per ora)
* Cicli vitali: > oltre i 500 cicli

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

LED: 1x Cree XM-L2 U2 with a lifespan of 50,000 hours
Output 5 constant light outputs, digitally adjusted and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (680h.) -> 40 lumens (26h.) -> 250 lumens (6.30h.) -> 450 lumens (2.15h.) -> 1200 (45min.)
Range: up to 130mt.
Peak of power: 4240 candles
Usable batteries: 1x 3.7V 18650 (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 86x35 mm.
Weight: 70g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Notes: water resistant as per IPX-7 standard
Accessories: 1x 3400mAh 3.7V 18650 battery - USB charging cable - front elastic strap - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 3400mAh

Batteria IMR ricaricabile da 3.6V a polo positivo piatto compatibile con torce Nitecore modelli CI7, P12GTS, P18, P22R, MH25GTS, MH12GTS, EC23, HC33 e CONCEPT 1

Equipaggiata con piastre frontali e posteriori in acciaio inox placcato al nickel per assicurare la miglior resistenza agli impatti, all'abrasione ed alla corrosione assicurando la massima conduzione elettrica. Adatta per device elettronici ad altissimo assorbimento energetico.

* Batteria ricaricabile IMR18650 3.6V - 3100mAh - 35A
* Ciclo vitale: oltre 500 ricariche
* Capacità: 3100mAh
* Dimensione batteria: 18mm di diametro x 65mm di lunghezza
* Peso: 46g

ATTENZIONE: Batteria con polo positivo piatto - Utilizzare solo in device compatibili con batterie di tipo IMR - Rispettate le polarità delle batterie in fase di carica e in fase di utilizzo - Prima di acquistare e utilizzare batterie ricaricabili, accertatevi che il vostro apparecchio le supporti consultando i manuali d'uso del produttore.

Utilizza un Led CRI a tonalità calda che permette all'occhio umano di riconoscere meglio i colori e le forme al buio; pensata soprattutto come torcia medica in modo da permettere al personale di effettuare diagnosi accurate. il Led CRI è fotobiologicamente sicuro, come da standard IEC/EN62471 ed elimina qualsiasi pericolo di luce azzurra emessa causa di danni fotochimici alla retina.

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x AAA 1.2V 750mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

LED: 1x Led Nichia 219B CRI - con un ciclo vitale di 50.000 ore 
Modi Operativi: 2, regolati elettronicamente
Potenze e Durate: 180 Lumens (45min.) -> 45 Lumens (5.15h.) -> 4 Lumens (35h.)
Picco di potenza: 860 candele
Distanza di illuminazione massima: 58m.
Metodo di accensione: Pulsante posteriore - Si accende sempre alla minima potenza
Metodo di selezione luminosa: Pulsante posteriore
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso e sistema PDOT brevettato
Batterie: funziona con 2 batterie usa e getta o ricaricabili AAA da 1.2/1.5V (vendute separatamente)
Misure: 12.8cm (L) - 0.55cm (D fusto) - 1.4cm (D testa)
Peso: 22g. batterie escluse
Accessori: clip, o-ring di ricambio
Impermeabilità: come da standard IPX-8 - immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezza

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 40mm.

Questo filtro trasforma il fascio della vostra torcia in luce rossa ottima da utilizzare contestualmente ai visori notturni ed adatta a non spaventare animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25 PRO - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC

CARATTERISTICHE BATTERIA

Batteria ricaricabile Li-Ion 18650 cilindrica
Voltaggio nominale: 3.7V
Capacità: 3400mAh
Polo Positivo: Sporgente
Circuito di protezione PCB per la protezione interna del voltaggio
La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V

SPECIFICHE TECNICHE BATTERIA

Capacità: 3400mAh nominali
Dimensioni: 18.7mm diametro x 69.3+/- 0.3mm altezza
Peso approssimativo: 48.2g
Voltaggio nominale medio: 3.7V
Voltaggio di picco: 4.2V
Potenza: 12.6 Wh (watt per ora)
Cicli vitali: > oltre i 500 cicli

PRECAUZIONI BATTERIA

Non lasciare incustodite le batterie durante la fase di carica
Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
Non siamo responsabili per danni derivati dalla manomissione delle batterie
Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.7V
* Capacità: 3200mAh
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V

PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA

* Capacità: 3200mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 46g
* Voltaggio nominale medio: 3.7V
* Voltaggio di picco: 4.2V
* Potenza: 9.6 Wh (watt per ora)
* Cicli vitali: > oltre i 500 cicli

- Batteria al Litio 3V
- Compatibile con Nitecore SENS Mini e per la serie NPL
- Non Ricaricabile

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GT, MH25GT, P12GT, P10, P30, SRT7, SRT9, MH27, MH27UV

fodero in cordura per torce a led: TM10K - TM9K - NC10000

Misura tasca: 3,5 x 4 x 8 cm

Misura esterna: 3,5 x 5 x 10,5 cm

Nitecore - medium clip for flashlight - flashlight accessory

cordura sheath for led torches models

P10 - MH12 - P20 Series

Pocket size: 2.6 x 2.8 x 9

External measurement: 3 x 3 x 15.5

cordura sheath for led flashlights: MH40 - MH40GT - MH40S - P35i

Pocket size: 6 x 3.5 x 10 cm

External measurement: 6.6 x 4 x 15 cm

Kit composto da 2 attacchi per fucile universali a forma di "8" fissati da due viti centrali.

* 1 Attacco con diametro 25mm (lato torcia) e 25mm (lato fucile / ottica)
* 1 Attacco con diametro 25mm (lato torcia) e 18mm (lato fucile / ottica)
* Entrambi gli attacchi sono realizzati in solido acciaio inox verniciato di nero
* Compatibili con torce dotate di testa con diametro massimo di 4/4.5cm; un diametro superiore fa toccare la testa della torcia alla canna

Attraverso questo attacco è possibile fissare una torcia alla canna o all'ottica di un fucile o di una carabina dotata di un punto di aggancio con diametro di 18mm o 25mm. Grazie alle due viti poste centralmente, è possibile il fissaggio su diametri diversi di canne in modo da avere una regolazione fine.

Accessorio originale Nitecore, compatibile con qualsiasi marca di torce presenti in commercio.

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.7V
* Capacità: 2300mAh
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V

PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA

* Capacità: 2300mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 46g
* Voltaggio nominale medio: 3.7V
* Voltaggio di picco: 4.2V
* Potenza: 8.5 Wh (watt per ora)
* Cicli vitali: > 500 cicli

BATTERY FEATURES.
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 5300mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 20A
* Dimensions: length of 75.4mm +/- 0.3mm - diameter of 21.5mm +/- 0.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FLASHLIGHT COMPATIBILITY
recommended for NITECORE MH12 PRO / MH25 PRO models

BATTERY FEATURES.
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 6000mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 20A
* Dimensions: length of 75.4mm +/- 0.3mm - diameter of 22mm +/- 0.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FLASHLIGHT COMPATIBILITY
recommended for NITECORE MH12 PRO / MH25 PRO models