Novembre 2020
-
Lionsteel - Nano - Black Canvas Micarta & CPM MagnaCut - NA01 CVB - knife
NANO is the latest knife in the hi-tech family, an ideal partner for everyday activities.
The blade is made of CPM MagnaCut steel with satin finish equipped with the "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.
The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.
The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Canvas Micarta
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 99g.
Closure: Frame Lock
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearingsLS-NA01CVB -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Lionsteel - Myto knife - Black micarta and titanium - MT01CVB - knife
Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with its strength:
has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.
Myto is supplied in a fully recyclable cardboard box. Inside, you will also find:the "lionSTEEL Handy" (tool for Hex and Torx screws) and the "cap screw" to be used when the flipper is removed
the warranty and maintenance card.
Intended use: Sports / TacticalType of production: Industrial
Country of production: Italy
Blade: M390 59 / 60HRC stainless steel
Blade treatment: Satin
Handle: titanium and micarta
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 96g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant cardboard box entirely recyclable
Notes: Carson Flipper opening system on ball bearingsLS-MT01CVB -
Fallkniven - H1 Zytel knife - CoS steel - knife
Available only with Zytel sheath - discontinued leather sheath
Intended use: hunting
Type of production: Industrial
Production Lama: Japan
Blade: full tang in San-Mai CoS / 420J2 59HRC stainless steel
Blade treatment: -
Handle: Thermorun E
Blade length: 100mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 215mm.
Thick when closed: -
Balance: set back, at 2cm.
Weight: 188g.
Closing: -
Clip: -
Sheath: in Zytel
Packaging: white cardboard box with Fallkniven logos
Note: -F-H1 -
Benchmade - 945BK-1 Mini Osborne Reverse Tanto G10 - knife
Intended use: Sports / Tactical / EDC
Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC steel
Blade finish: Black Cerakote
Handle: black and blue G10 with anodized aluminum spacers
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed Length: 97.5mm.
Total length: 172mm.
Thick when closed: 10mm.
Weight: 62g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel with PVD treatment
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren OsborneBM-945BK-1 -
Lionsteel - Nano - Forged Carbon Fiber & CPM MagnaCut - NA01 CF - knife
NANO is the latest knife from the hi-tech family, an ideal partner for everyday activities.
The blade is made of CPM MagnaCut steel with satin finish equipped with "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.
The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.
The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Forged Carbon Fiber
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 97g.
Closure: Frame Lock
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearingsLS-NA01CF -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fox - Radius Carbon Fiber & Copper - Special Edition in SanMai SPG2 - CO-550CF - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Carbon fiber with HDL copper "Snake Skin" inserts
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 115g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-550CF -
Fox - Radius Titanium Black PVD - Special Edition in SanMai SPG2 - CO-550TiB - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: Titanium with Black PVD finish
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 140g.
Closure: Fingers Safe Opening System
Clip: Titanium, billet, with Black PVD finish
Packaging: cardboard box, drawer, with Fox Knives logos - Leather sheath, hydroformed, for belt
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-550TiB -
Fox - Radius Black G10 - Special Edition in SanMai SPG2 - CO-550G10B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine an innovative and award-winning model such as the Radius by Denis Simonutti, a Japanese steel from powders (sintered) and laminated (SanMai) by Takefu Steel.
For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: Satin finish with mirror polished counter edge
Handle: G10
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 185mm.
Weight: 106g.
Closure: Fingers Safe Opening System
Clip: In stainless steel, flush
Packaging: box with Fox Knives logos, Nylon sheath with zip
Notes: Design by Denis Simonutti - Winner of the Blade Show 2019 in Atlanta as "Knife of the year" and "Imported knife of the year"The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.CO-550G10B -
Wander Tactical - Tryceratops XL El Carnicero knife - Icebrush & Black Micarta - craft knife
Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade Finish: Icebrush
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 442g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-TRY-XL-B -
Fallkniven - U2 knife Zytel - Aquarius Edition - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Japan
Blade: San-Mai SGPS 62HRC stainless steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 150mm.
Thick when closed: 11mm.
Weight: 42g.
Opening: Two-handed
Closure: Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fallkniven logos
Notes: Special edition: the constellation of Aquarius is engraved on the bladeF-U2AQ