Offerte
-
Museum Replicas Windlass - Complete armor of Augusta - 300508 - 205 cm - handcrafted
Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.
The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)
This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.
Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.
The helmet can accept up to three decorative plumes (sold separately).
Perfect for decorating a tavern, a living room, a business
Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg300508 -
Museum Replica Windlass - Cappello a tricorno in cuoio - 200550 - abbigliamento
Questa replica, costruita con metodologie e principi del tutto simili a quelli utilizzati nel medioevo, risultaesteticamente dettagliata e ben rifinita come qualsiasi prodotto espositivo ma anche assolutamente funzionale.
Completamente realizzato in cuoio ha una circonferenza interna di circa 65 centimetri, pesa 800 g. ed un lacciolo aggiustabile per una perfetta calzabilità.200550 -
Museum Replicas Windlass - 100298 Monks Robe Red - Medieval clothing
Museum Replicas Windlass - 100298 Monks Robe - Medieval clothing This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer. Completely made of heavy brown cotton, has a hood and rope belt.100298R -
Windlass - Altair Under Tunic
This under tunic is from Assassin's Creed and worn by Altair the Assassin. His long sleeve under tunic is a soft gray and made of 100% cotton. Coordinates with the Altair Over Tunic with Hood #883002, which is also shown in the picture. The complete outfit is shown here, but to get the look you have to purchase all the pieces or look in our Complete Outfits for Men section. Choose from sizes S/M or L/XL. Key Features: Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by Altair the Assassin883001 -
Museum Replicas Windlass - Dress for baby monaco 100794 - Medieval clothing
Dress for baby monaco 100794 - Medieval clothing
This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer.
This dress is designed for children aged 7 to 13 years.
Completely made of heavy brown cotton, has a hood and rope belt.100794 -
Museum Replicas Windlass - Lorica Segmentata300176 - armatura romana - abbigliamento
Armatura romana da legionario indossabile realizzata in acciaio.
La lorica segmentata, cosiddetta dagli studiosi a partire dal periodo del Rinascimento, è la corazza che nell'immaginario collettivo viene più facilmente associata al legionario romano.Questo tipo di corazza risultava più leggera della Lorica Hamata, ma meno confortevole rispetto a quest'ultima pur mantenendo liberi i movimenti di torso e braccia, costituiva però una pesante protezione che appesantiva decisamente il combattente.La Segmentata offriva una ottima protezione contro la maggior parte dei colpi di frecce e spade, soprattutto provenienti dall'alto.
Tuttavia la sua struttura fatta di cuoio e cerniere di bronzo e orichalcum, una lega simile al moderno ottone, la rendeva più difficilmente mantenibile per il fatto di necessitare di pezzi di ferro laminato interi.
Questo potrebbe spiegare in parte i motivi per cui in epoca tarda fu abbandonata a favore delle antiche Hamatae, per il vero mai dismesse.300176 -
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Worn by the crusaders of the hospital, this long brown cotton tunic has a large white cross embroidered on the chest and a flashy belt rope.
And 'completed by strips of chain mail antiqued to give the illusion of wearing a complete armor beneath his tunic knit.
The tunic also comes complete with a heavy cotton hood with cross embroidered on the left shoulder.
Material: 100% cotton100588 -
Windlass - Crusader Priest Robe
This holy follower wears both the blood red front tabard of the Crusades, while also the gold embroidered lion rampant of King Richard. Full pure white cotton robe with matching hood and cap. Heavy gold applique adorns the sleeves. Dry clean only. Choose S/M or L/XL. Key Features Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by the Crusader Priest883010 -
Windlass - 15th Century Long Sword - historical sword
Around 1450, the long sword, often called "one-and-a-half", was widely used in war, but it was also often a weapon of self-defense for civilians. Coupled to a dagger it was excellent against thieves, brigands and assassins, often organized into gangs that roamed the countryside.
Equipped with a good tip and adequate length, it allowed opponents to be kept at a distance. Its average weight allowed it to be used easily with one hand, in combination with the dagger in the other. Moreover, thanks to the length of the handle, it could be used with both hands to have greater control and perform very powerful cuts.
Blade: carbon steel - NOT SHARP
Handle: black leather and wire
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 90cm.
Handle Length: 24cm. (including knob)
Total Length: 115cm.
Blade width: 45mm.
Blade thickness: 4mm.
Weight: 1514g.
Weight with Sheath: 1800g.
Balance: advanced to 13cm.500800 -
Windlass - German Bastard sword - Historical sword
Perfect replica of the A477 sword of the Wallace Collection and like many other German swords it is first and foremost a sword designed for cutting, thanks to its cross-sectional blade which gives extreme resistance.
It is also a splendid example of a one-and-a-half sword, with proportions of a single-handed sword but a long handle suitable for holding the second hand in support; this gives it an exceptional balance and unparalleled speed of response.
Blade: 1095 carbon steel - not sharp
Handle: black leather
Blade length: 76cm
Total Length: 98.5cm
Handle Length: 20cm
Blade width: 5cm
Blade thickness: 4mm
Balance: advanced, at 8.5cm. by the guard
Weight: 1822g
Weight with sheath: 2120g
Sheath: leather and antique steel500792