Ottobre 2015

Scissors Thinning mod. Style by Salon Professional 6.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 6.5 cm
Overall Length: 6.5 Inches - 16,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Scissors Thinning mod. Style by Salon Professional 6.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 6.5 cm
Overall Length: 6.5 Inches - 16,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Scissors Thinning mod. Style by Salon Professional 5.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Scissors Thinning mod. Style by Salon Professional 6.5 "

Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 6.5 cm
Overall Length: 6.5 Inches - 16,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.

Each scissor is controlled by our laboratory in order to ensure a perfect cut

Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine

In questo numero:

CUSTOM
I rasoi a mano libera di Luca Pizzi
Dario Quartini
Giuseppe Pala

EVENTI
Achi a Parma
Raduno a Vittorio Veneto
Coltello in festa a Maniago
K-Days 2015

TECNICA
Come realizzare il filework
Il damasco ritorto
Victorinox vs. copia cinese

TREND
Flipper mania

IN VETRINA
Helle Utvaer
Antonini Old Bear
Extrema Ratio T-Razor
Gerber Strongarm
Fox B.R.I.
Portachiavi Key-Bar

Morakniv - Companion Pink - Mora of Sweden - 12095 - knife

Intended Use: Hiking / Hunting / Sports / Fishing

Type of production: industry
Blade: stainless steel Sandvik 12C27 57 / 58HRC
Country of Production: Sweden
Handle: Plastic and rubber
Blade length: 104mm.
Blade thickness: 2.5 mm.
Overall length: 218mm.
Balancing: -
Weight: 116g.
Sheath: Plastic
Notes: -

Morakniv - Companion Pink - Mora of Sweden - 12095 - knife

Intended Use: Hiking / Hunting / Sports / Fishing

Type of production: industry
Blade: stainless steel Sandvik 12C27 57 / 58HRC
Country of Production: Sweden
Handle: Plastic and rubber
Blade length: 104mm.
Blade thickness: 2.5 mm.
Overall length: 218mm.
Balancing: -
Weight: 116g.
Sheath: Plastic
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Powers and durations certified ANSI / NEMA FL1 using 1 battery from 3.7V 650mAh IMR14500 under laboratory conditions. With different batteries and conditions, the data can vary.

LED: 1x Cree XM-L1 U2 with a life cycle of 50,000 hours + 1x Nichia LED red for reports / battery charge / emergency light
Output: 920 lumens (0.30h.) -> 500 lumens (0.45h.) -> 180 lumens (1.45h.) -> 70 lumens (5h.) -> 1 lumens (100h.) -> Strobe -> SOS -> Location Beacon -> red LED for reading maps / emergency light / indicator of the state of battery charge
Lighting Distance: 170m.
Peak power: 7300cd
Batteries: NOT INCLUDED - 1x battery uses IMR / Li-Ion 14500 3.7V or 1x AA disposable / rechargeable 1.5V
Dimensions: 107.9cm (L) x 2.54cm (D)
Weight: 60.7g. - Excluding batteries
Head: T6061 aircraft aluminum monobloc
Body: one-piece aircraft aluminum T6061
Finish: Anodized, Type III
Lens: ultra clear toughened glass with anti-reflective coating
Accessories: scabbard, removable clip, wrist strap, o-ring seals, rubber button rear parts
Notes: Waterproof to IPX-8 specification (up to 2 m. To 30 min.)
Front buttons for selecting light - Digital Light - Memory function last set power - works vertically as candle

Powers and durations certified ANSI / NEMA FL1 using 1 battery 3.7V 700mAh IMR18350 under laboratory conditions. With different batteries and conditions, the data can vary.

LED: 1x Cree XM-L1 U2 with a life cycle of 50,000 hours + 1x Nichia LED red for reports / battery charge / emergency light
Output: 920 lumens (0.30h.) -> 500 lumens (0.45h.) -> 180 lumens (1.45h.) -> 70 lumens (5h.) -> 1 lumens (120h.) -> Strobe -> SOS -> Location Beacon -> red LED for reading maps / emergency light / indicator of the state of battery charge
Lighting Distance: 190m.
Peak power: 9000cd
Batteries: NOT INCLUDED - 1x battery uses Li-Ion CR123A disposable RCR123A rechargeable 3V. / 3.7V or 3.7V rechargeable 1x IMR18350
Measurements: 91.2cm (L) x 2.54cm (D)
Weight: 57g. - Excluding batteries
Head: T6061 aircraft aluminum monobloc
Body: one-piece aircraft aluminum T6061
Finish: Anodized, Type III
Lens: ultra clear toughened glass with anti-reflective coating
Accessories: scabbard, removable clip, wrist strap, o-ring seals, rubber button rear parts
Notes: Waterproof to IPX-8 specification (up to 2 m. To 30 min.)
Front buttons for selecting light - Digital Light - Memory function last set power - works vertically as candle

The A.S.F.K. is a dagger is dedicated and acquired by the new Italian Army Special Forces Commando (COM.FO.SE). It recalls the tradition of the "Arditi" and bloody battles of the trenches marked by assaults with bayonets. The A.S.F.K. trench knife is a modern twist eith Böhler N690 steel blade, Forprene handles with fingers protection and skull crasher.

Intended use: Tactical / Collection

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Treatment blade: Testudo
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balancing: back
Weight: 413g.
Sheath: Cordura, colored desert, MOLLE compatible
Packaging: cardboard box with logos Extrema Ratio
Notes: Included in command of the Italian Army Special Forces (COM.FO.SE.)

Intended use: Tactical / Collection

Production Type: Handmade
Production Country: Italy
Blade: D2 Tool Steel
Treatment Blade: Dark Earth Gunkote
Handle: Micarta Green Loveless
Blade length: 120 mm.
Blade thickness: 5.5 mm.
Overall length: 275 mm.
Balance: the branch guard
Weight: 395 g.
Sheath: handmade, Kydex thermoformed type attack Tek-Lok
Packaging: -
Notes: every knife is unique as it is handmade, might therefore be small differences / inaccuracies with respect to the photographed model, also with regard to colors of blade and handle.

Third generation of the successful model of Pohl Force Bravo, now with steel CTS-BD1, blade slightly thicker design of the grips and renovated to offer better grip during use.

Intended use: tactical, sports
Type of production: Industrial
Blade: Stainless steel CTS-BD1 59 / 61HRC
Blade treatment: -
Handle: Zytel
Blade length: 83mm.
Blade thickness: 3.5mm.
Overall length: 195mm.
Thick when closed: 16mm
Balancing: -
Weight: 120g.
Closure: Back Lock
Pouch: Cordura, with zip
Packaging: cardboard box with logos Pohl Force, patches PVC and Velcro logo Pohl Force
Notes: -

Comb with leather sheath. Made of vegetable cellulose acetate.

* Overall Length: 12cm (Width 2.5cm)
* Comb: 10cm

Craft knife produced by the famous Master cutler Italian Salice Max Sanna.

This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.

Intended Use: Collection / Gentleman

Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by Max

For more information you can view the site sull'accaio used: www.collinisteel.com

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper