Ottobre 2016

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Outdoor

Production Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collection

The Nitecore EDC33 is a high-performance Every Day Carry (EDC) flashlight, ideal for daily use due to its outstanding brightness and projection distance. Equipped with the innovative NiteLab UHi 20 MAX LED, it provides a powerful 4000-lumen light output and an impressive range of about 450 meters.

Key Features:
Maximum Brightness: 4000 lumens with a range of approximately 450 meters.
Brightness Modes: Four brightness levels, plus search and Lumin Shield modes.
Easy-to-Use Rear Switch: One-click on/off; mode change with a half-click.
Hidden USB-C Charging: Built-in charging port, easily accessible.
Lockout Functions: Total and partial lockout to prevent accidental activations.
Included Accessories: Wrist lanyard, USB-C charging cable, clip.
High-Performance EDC:

Ideal for everyday carry, the EDC33 ensures a high-intensity beam, controllable through the rear switch. You can select and memorize the desired brightness level, which will remain set even after turning off the flashlight. The 1700-lumen search modes and the maximum power of 4000 lumens are easily activated.

USB-C Rechargeable:

With the convenience of USB-C rechargeability, the EDC33 can be fully charged in just 2 hours and offers up to 63 hours of continuous use in the lowest mode. It includes a power indicator to monitor the charging status.

Compact and Durable:

The EDC33 is only 11.56 cm long and weighs 127 grams (with clip), making it easily pocketable. Waterproof according to IP68 standards and shock-resistant up to 2 meters, it is designed to ensure reliability in any environment.

TECHNICAL DATA:

TECHNICAL SPECIFICATIONS

LED: UHi 20 MAX LED
Maximum Brightness: 4000 lumens
Peak Beam Distance: 449.59 meters
Peak Beam Intensity: 40505 cd
IP Rating: IP68
Impact Resistance: 2 meters

Dimensions:
Length: 11.56 centimeters (4.55 inches)
Head Diameter: 2.54 centimeters (1.00 inch)
Tube Diameter: 2.39 centimeters (0.94 inch)
Weight (with clip): 127.01 grams (4.48 ounces)

BRIGHTNESS OUTPUTS

MODE | OUTPUT | RUNTIME
Lumin Shield (Floodlight): 4000 lumens | ~
Search (Spotlight): 1700 lumens | ~
High: 1200 lumens | 2 hours and 31 minutes
Mid: 300 lumens | 6 hours and 58 minutes
Low: 70 lumens | 31 hours
Ultralow: 5 lumens | 63 hours

Accessories: Wrist lanyard, clip, USB charging cable

For a detailed analysis of this product's features, read the in-depth review on our blog.

TECHNICAL FEATURES:
Led: 1x LED spotlighr for the main flashlight and 1x red and white light COB strip for the lantern
Operating Modes: 7 different lighting modes
Powers and Torch Durations: 290 Lumens (10h.) -> 125 Lumens (15h.)
Peak power: 1269 candelas
Maximum lighting distance: 93m.
Powers and Durations White light lantern: 600 Lumens (6h.) -> 260 Lumens (10h.) -> 30 Lumens (78h.)
Powers and Durations Red light lantern: 30 Lumens (30h.) -> Flash
Peak power: 100 candelas
Body: ABS 
Batteries: removable, rechargeable, 21700 Li-ion type, 5000mAh
Measurements: 21.6cm (H) - 5.0cm (W) - 4.1cm (Thick.)
Weight: 224g. battery included
Accessories included: USB/USB-C charging cable, NL2150 Li-ion 5,000mAh battery
Waterproofness: as per IP67 standard
Impact resistance: withstands falls from 1m height
Notes: Large rear magnetic base that rotates up to 180° - Carabiner hook for use in various environments

TECHNICAL FEATURES:
Led: 2x SST40 LEDs for the main flashlight and 20x CRI >90 warm light (4000K) diodes for the lantern
Operating Modes: 5 light powers for the flashlight and 7 types of lighting for the lantern
Flashlight Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (10h.) -> 300 Lumens (21h.) -> 35 Lumens (100h.) -> 1 Lumen (600h.)
Peak power: 23100 candelas
Maximum lighting distance: 300m.
Powers and Durations White light lantern: 400 Lumens (7h.) -> 55 Lumens (60h.) -> 5 Lumens (200h.) -> 35 Lumens (100h.) -> 1 Lumen (600h.)
Powers and Durations Red light lantern: 10 Lumens (80h.) -> 2 Lumens (260h.) -> S.O.S. -> BEACON
Peak power: 70 candelas
Body: ABS 
Batteries: built-in, rechargeable, non-removable, Li-ion, 10000mAh
Measurements: 11.3cm (H) - 6.0cm (W) - 3.4cm (Thick.)
Weight: 271g.
Accessories included: USB/USB-C charging cable
Waterproofness: as per IP67 standard
Impact resistance: withstands falls from 1m height
Notes: Can be used as an 18W powerbank, compatible with QC (Quick Charge) technology - built-in folding hook for hanging from ceiling

TECHNICAL DATA:
Led: 1x white light + 1x red light
Operating Modes: 4 different powers and light modes
Powers and Durations White Light: 150 Lumens (2.5h.) -> 45 Lumens (6h.)
Powers and Durations Red Light: 4 Lumens (30h. ) -> Blinking
Maximum lighting distance: 50m.
Power and luminsa selection method: Two power buttons per flashlight and infrared management system
Body and Lenses: polymer
Batteries: Built-in, non-removable 3.6V and 600mAh Li-Ion, equipped with built-in USB-C type charging system
Measurements: 5.2cm (LENGTH) - 5.9cm (WIDTH,) - 1.9cm (bracket included)
Weight: 41g. - bracket included
Accessories: front elastic headband - USB/USB-C charging cable
Waterproofness: as per IP65 standard
Impact resistance: withstands falls from 1m height
Notes: can be operated only with hand gestures, without touching it, by activating the infrared (IR) sensors built into the flashlight

Key Features
* Lightweight, USB-C rechargeable, triple output headlamp
* Primary white LED with a maximum output of 550 lumens
* High CRI white auxiliary light (CRI> 90, warm light)
* Red light illumination designed to preserve night vision
* Uses a unibody optical lens system with various facets that emit a uniform, soft light.
* Built-in 1,800mAh lithium-ion battery
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓1A)
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 3 light sources and 3 special modes available
* Designed with 4 power indicator lights, to inform about the remaining battery charge
* Made of durable PC material with aluminium alloy front housing
* Compact and lightweight, impact resistant up to 1 metre high
* Waterproof and dustproof to IP66 standard


Led: 1x cold light, depth; 1x warm light CRI >90 for close-up and reading use; 1x red light
Operating modes: 9 different wattages and light modes
Wattages and Durations Cool Light: 550 Lumens (5h. ) -> 200 Lumens (8h.) -> 60 Lumens (38h.) -> S.O.S. -> Beacon Light
Warm Light Powers and Times: 50 Lumens (42h. ) -> 6 Lumens (147h.)
Powers and Times Red Light: 5 Lumens (80h. ) -> 10 Lumens 50h.
Peak power: 5800 candelas
Maximum lighting distance: 145m.
Method of luminsa switching and selection: Two buttons for on, off and selection
Body: ABS and Aluminium
Batteries: 3.7V Li-Ion and 1800mAh built-in, non-removable, with built-in USB-C charging system
Measurements: 6.23cm (L) - 4.6cm (W) - 3.56cm (D) with front stand
Weight: 95.5g. - Battery, stand and elastic band included
Accessories: Elastic headband - USB/USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: -

Key Features
* Lightweight, USB-C rechargeable, triple output headlamp
* Primary white LED with a maximum output of 550 lumens
* High CRI white auxiliary light (CRI> 90, warm light)
* Red light illumination designed to preserve night vision
* Uses a unibody optical lens system with various facets that emit a uniform, soft light.
* Built-in 1,800mAh lithium-ion battery
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓1A)
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 3 light sources and 3 special modes available
* Designed with 4 power indicator lights, to inform about the remaining battery charge
* Made of durable PC material with aluminium alloy front housing
* Compact and lightweight, impact resistant up to 1 metre high
* Waterproof and dustproof to IP66 standard


Led: 1x cold light, depth; 1x warm light CRI >90 for close-up and reading use; 1x red light
Operating modes: 9 different wattages and light modes
Wattages and Durations Cool Light: 550 Lumens (5h. ) -> 200 Lumens (8h.) -> 60 Lumens (38h.) -> S.O.S. -> Beacon Light
Warm Light Powers and Times: 50 Lumens (42h. ) -> 6 Lumens (147h.)
Powers and Times Red Light: 5 Lumens (80h. ) -> 10 Lumens 50h.
Peak power: 5800 candelas
Maximum lighting distance: 145m.
Method of luminsa switching and selection: Two buttons for on, off and selection
Body: ABS and Aluminium
Batteries: 3.7V Li-Ion and 1800mAh built-in, non-removable, with built-in USB-C charging system
Measurements: 6.23cm (L) - 4.6cm (W) - 3.56cm (D) with front stand
Weight: 95.5g. - Battery, stand and elastic band included
Accessories: Elastic headband - USB/USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: -

NITECORE EDC27 is a compact and ultra-slim flashlight with extraordinary light output. Its thin and rigid construction is made of high-strength stainless steel with a PVD titanium coating, with a carbon fiber reinforced polymer (CFRP) frame for excellent impact and torsion resistance.

It uses 2 Luminus SST40 LEDs for uniform light, with a maximum output of 3,000 lumens and a maximum range of 220 meters. The flashlight is equipped with a hybrid heat dissipation system for longer light duration and powered by a built-in 1,700mAh Li-ion battery.

It is rechargeable via USB-C and has a multifunctional OLED display showing brightness level, battery voltage and time remaining. It can be attached to the MOLLE system of a backpack or pocket with the included clip and has an IP54 rating for all-weather use.

The EDC27 features a hybrid heat dissipation system. Combined with the copper material and aluminum outer plate, as well as the Advanced Temperature Regulation (ATR) module, the EDC27 solves the heat dissipation problem of conventional EDC flashlights to provide longer lighting life.

Powered by the built-in 1,700mAh lithium-ion battery, the EDC27 can provide up to 37 hours of battery life. It is USB-C rechargeable and available with a reversible socket, while the charging socket cover is made to provide excellent resistance to moisture, dust and shock.

The multifunctional OLED display can show the brightness level, battery voltage, remaining battery life and more in real time. With a sturdy clip included, the EDC27 can be attached to the MOLLE system of a backpack or pocket.




TECHNICAL DATA:

LEDs: 2x Luminus SST40 with a life cycle of 50,000 hours
Brightness Levels: 5 light powers + STROBO
Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (1.45h. ) -> 200 Lumens (3.45h.) -> 65 Lumens (11h.) -> 15 Lumens (37h.)
Peak power: 12,200 candelas
Maximum lighting distance: 220m.
Lighting method: Dedicated on/off button
Light selection method: When on, lightly pressing the power button
Body: stainless steel with titanium PVD coating
Battery: Built-in 1,700mAh Li-Ion type, equipped with built-in USB-C type charging system
Measurements: 13.5cm (Length) -3.14cm (Width,) - 2.07cm (Thickness)
Weight: 124g.
Accessories: wrist strap, USB charging cable
Waterproofness: as per IP54 standard, resists dust and light splashes of water
Impact resistance: withstands falls from 1m height
Notes: equipped with built-in charging system via USB-C port (cable included, power adapter not included

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

FEATURES
* Ultra-light dual-beam USB-C rechargeable headlamp weighs only 45g.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock-resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 45g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: Kydex, with Tek-Lok attachment
Packaging: cardboard box with BlackFox logos
Notes: Fire starter included, to be inserted in the scabbard - Design by Alfredo Doricchi

WAF Corkscrews

The elegance of a gesture that can be found in everyday life as well as on important occasions.

Corking a bottle represents the encounter between the culture of drinking and the importance of a ritual.

Designed for the first patent in 1965, Waf corkscrews have reached an increasingly sophisticated level of technology over time, so much so that they are now considered a classic Italian wine article. An important itinerary, where the evolution of an object is realised in a gesture: uncorking a bottle of good wine with simplicity and safety.

Waf corkscrews are the only ones of their kind to have been designed and manufactured with these factors in mind, as well as for easy and safe cork extraction.

Extraction takes place vertically and progressively without any possibility of damaging the cork itself or leaving any residue.

Corkscrew SENIOR 3B

Each piece of this corkscrew is worked individually with care and perfectly reflects the quality level reached by Waf in metalworking. The Senior corkscrew is the most coveted gift par excellence, the absolute protagonist of conviviality movements, it allows quick and safe uncorking with one hand. Invented by Walter Fortunato, founder of the company.

FEATURES:

Material : Bronze-plated aluminium alloy 

Dimensions : 18.0 x 5.5 x 23.0 cm

Weight: 564 g.

Cardboard cake plate.High round black color.

Rigid pulp under-pie coated with aluminum.

Individually bagged. Premium quality.

Ideal for processing stages and for separating tiers of tiered cakes.

lined with polypropylene

Available sizes 

cm. 25 h 1.2cm

cm. 30 h. 1.2cm.

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: in Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Lock to light the fire included, to be inserted in the scabbard - Design by Alfredo Doricchi

Alexander - K2 - forged tin foil lifter - Made in Italy

Made of stainless steel, forged one-piece with black resin handle.

Specifications:

Brand: Alexander

Total length: 17.5 cm.

Material: stainless steel.

Series: Apollo

Made in Italy

Intended Use: Bushcraft / Outdoor

Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade Finish: Stonewashed
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 290g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis Simonutti

Intended Use: Bushcraft / Outdoor

Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 180g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis Simonutti

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:

Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Titanium alloy
Battery: Built-in 280mAh Li-Ion type, with built-in USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 21.5g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

Destinazione d'uso: Outdoor / Utility / EDC

Tipo di produzione: Industriale
Paese di produzione: China
Lama: Acciaio Inox 440C
Trattamento lama: Blackwashed
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3.5mm.
Lunghezza totale: 115mm.
Peso: 71g.
Fodero: in Kydex, con clip in acciaio inox
Confezione: scatola in cartone con loghi BlackFox
Note: Design by Tommaso Rumici

Intended Use: Rescue Tool / Utility

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso Rumici

Intended Use: EDC / Utility / Tactical/

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 71g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso Rumici

Alexander - Set of 6 forged table spoons - White - Last one - Made in Italy

Five steps to make a quality product.

To make the steel from the rod for Alexander cutlery, no less than five careful, time-consuming and expensive processing stages are required: 

forging from hot bars of stainless steel 

hot coining 

shearing of profile and interior 

roughing and bending 

tempering. In addition to the above steps, there are the normal finishing operations (mirroring, handle machining). The spoon is sober and slender in shape, with respect for functionality. Handcrafted forged cutlery in stainless steel, with a black bakelite handle polished by hand with mirror blades.

Specifications

Brand Alexander

Total length 20 cm

Handle Material Synthetic.

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Handle: wood (zebrawood)
Blade length: 71mm.
Blade thickness: 2,3mm.
Total length: 167mm.
Blade lock: SlipJoint
Weight: 42g.
Clip: absent
Packaging: cardboard box with Boker Plus logos
Notes: Tungsten carbide glass breaker on the back side

Uso consigliato: EDC / Sportivo

Tipo di produzione: Industriale
Paese di produzione: China
Lama: in acciaio Inox Sandvik 12C27
Manicatura: in titanio
Lunghezza lama: 71mm.
Spessore lama: 2.3mm.
Lunghezza totale: 167mm.
Blocco lama: SlipJoint
Peso: 78g.
Clip: amovibile, in acciaio inox
Confezione: scatola di cartone con loghi Boker
Note: Frangivetri al carburo di tungsteno nella parte posteriore

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated button + Warm white light + Warm white light flashing + Ultraviolet
Powers and Durations: 300 Lumens (0.30h.) -> 60 Lumens (1h.) -> 15 Lumens (4h.) -> 1 Lumen (40h.) -> UV -> CRI light -> CRI flashing
Power peak: 1260 candles
Maximum illumination distance: 71m.
Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12g. - battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light immersions
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package)

The Tiki GITD will glow green in the dark after it has been illuminated by UV light.

Intended Use: Bushcraft / Outdoor

Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C HRC 57-59
Blade Treatment: Stonewashed
Handle: Micarta
Blade Length: 100mm.
Blade thickness: 4mm.
Total lenght: 220mm.
Weight: 180g.
Sheath: Kydex, with Tek-Lok type fitting
Package: Cardboard box with BlackFox logos.
Notes: Tinderbox to light the fire to be inserted in the sheath - Design by Alfredo Doricchi

Cardboard cake plate.tall rectangular.

Rigid pulp under-pie coated with aluminum foil.

Individually bagged. Premium quality.

Ideal for processing steps and for separating tiers of tiered cakes.

lined with polypropylene

Available sizes

20 x30 cm

height 1.2 cm.

Cardboard cake plate.tall square.

Rigid pulp under-pie coated with aluminum foil.

Individually bagged. Premium quality.

Ideal for processing steps and for separating tiers of tiered cakes.

lined with polypropylene

Available sizes

40x40 cm. 45x45 cm.

height 1.2 cm.

Decora - Rigid coated cardboard cake plate - ass.sizes - cake boards

High cardboard cake plate

Rigid cake plate made of pulp coated with aluminium foil. 

Individually wrapped.

Premium quality.

Ideal for working stages and for separating tiers of tiered cakes.

Polypropylene coated

Available sizes

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

KEY FEATURES:
* Revolutionary and extremely advanced keychain flashlight
* Uses 4 CREE XP-L2 V6 LEDs capable of producing a maximum light of 4,000 lumens
* Maximum peak intensity of 10.900cd and maximum illumination distance of 209m
* Uses a totally transparent optical lens to ensure uniform and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charge time etc.
* Built-in 1,000mAh Li-ion battery
* APC (Advanced Power Cut-Off) technology to minimize consumption when not in use
* Integrated Li-ion battery charging system via USB-C plug
* High efficiency circuits to ensure continuous lighting up to 67 hours
* 5 selectable brightness levels with direct access to TURBO mode
* Stores the last light mode selected by the user
* 2 adjustable lock levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and tears up to 30kg

TECHNICAL DATA:
Led: 4x Cree XP-L2 V6 with a life cycle of 50,000 hours
Brightness levels: 5 light powers, selectable with the appropriate dedicated button
Powers and Durations: 4000 Lumens (N.D.) -> 200 Lumens (2.45h.) -> 65 Lumens (7h.) -> 15 Lumens (21h.) -> 1 Lumen (67h.)
Peak of power: 10,900 candles
Maximum illumination distance: 209m.
Power on method: Power on and off button
Light selection method: Light selection button
Body: Aviation aluminum with HA III anodization degree
Battery: Integrated 1,000mAh Li-Ion type, equipped with integrated USB-C type charging system - The flashlight can stay on while it is charging
Measurements: 8.2cm (Length) - 2.92cm (Width) - 2.92cm (Thickness)
Weight: 77g. - clip and battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable included, power supply not included) - The flashlight can stay on while it is charging - In the charging phase, the LEDs under the buttons will show the status and will automatically turn off when recharging completed - The charging system automatically prevents undervoltage, overvoltage and has built-in short circuit protection. - The rear hook of the flashlight, with quick release and designed to anchor it to a key ring or other equipment, resists traction up to 30kg.

Key Features:
* Revolutionary and extremely advanced keychain flashlight
* Uses two LEDs capable of producing a maximum light of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Uses a totally transparent optical lens to ensure uniform and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charge time etc.
* Built-in 280mAh Li-ion battery
* APC (Advanced Power Cut-Off) technology to minimize consumption when not in use
* Integrated Li-ion battery charging system via USB-C plug
* High efficiency circuits to ensure continuous lighting up to 60 hours
* 5 selectable brightness levels with direct access to TURBO mode
* 2 adjustable lock levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and tearing up to 30kg

Technical data:
Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 light powers, selectable with the appropriate dedicated button
Powers and Durations: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak of power: 2000 candles
Maximum illumination distance: 89 m.
Power on method: Power on and off button
Light selection method: Light selection button
Body: Aviation aluminum with HA III anodization degree
Battery: Integrated 280mAh Li-Ion type, equipped with integrated USB-C type charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 18.8g. battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly found); while charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a key ring or other equipment, resists a traction of up to 30kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL 1-2019 standards

KEY FEATURES:

* 11 modes available with 5 light sources
* Possibility of continuous light or flashes in 5 different colors
* Built-in lithium-ion battery with a maximum autonomy of 50 hours
* Rechargeable with built-in USB-C port
* One-handed operation of the torch, via a single button
* An indicator light in the flashlight indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight bracket, with Velcro hooks on the back
* Made of sturdy and quality plastic materials
* Extremely lightweight and pocket-sized design
* Withstands impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 5x high power LEDs, white, red, blue, yellow, green, with a life cycle of 50,000 hours
Operating Modes: 5 colored flashes and a special mode (police warning with blue / red light)
Powers and Durations: Red 3 lumen 50 hr - Green 8 lumen 50 hr - Yellow 9 lumen 50 hr - White 15 lumen 40 hr - Blue 2 lumen 40 hr - Red / Blue 40 hr

Power on and selection method: Central button for power on, off and light selection
Body: thermoplastic materials
Battery: integrated, not removable, 300mAh Li-Ion, rechargeable via MicroUSB-C plug
Torch measurements with bracket: 61.8mm (Length) - 28.9mm (Width) - 21.7mm (Thick.)
Torch weight: 24.5g.
Weight with bracket: 35.5g.
Accessories: support bracket with hooks for the front and rear velcro - USB charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m in height
Note: -

Real powers and durations, certified in the laboratory by ANSI / NEMA FL1 standards

NU series product specially designed for law enforcement.
The NITECORE NU07 LE is a USB-C rechargeable mini sign light with 11 modes and 5 light sources with constant lighting or flashing red, green, yellow,
white / blue and red / blue police alarm.

The completely transparent shell makes the signals identifiable in all directions.

The flashing colors can indicate different groupings or allow for quick identification of team members in specific positions.

Thanks to the ARC adapter it can be attached to the helmet for special operations with quick and secure attachment.

Thanks to the innovative design of the rear clip, it can be easily attached to the standard MOLLE system.

The hook and loop attachment on the back of the bracket ensures a firm and secure fit.
The slots located on both sides of the bracket allow you to strengthen the attachment by fixing the helmet cable or the elastic to prevent accidental loss.

The single button interface is easy to use with a built-in 300mAh rechargeable lithium-ion battery allowing for up to 50 hours of runtime.

The waterproof design makes it IP66 rated.

The body is constructed of solid and durable PC materials with an ultra-light and compact design.

Led: 2x Osram P8 with a life cycle of 50,000 hours and with a lighting diameter of 100 °
Operating Modes: 4 light powers, selectable with the dedicated button
Powers and Durations: 700 Lumens (15min.) -> 180 Lumens (1.30h.) -> 30 Lumens (8h.) -> 1 Lumen (50h.)
Power peak: 2100 candles
Maximum illumination distance: 74m.
Ignition method: Front on / off button
Light selection method: Front light selection button
Body: aviation aluminum with HA III anodizing degree
Batteries: Li-Ion, included, non-removable, equipped with an integrated MicroUSB type charging system
Measurements: 6.0cm (Length) - 2.45cm (Width,) - 1.38cm (Thickness)
Weight: 26g. - battery included
Accessories: double steel ring for hooking
Waterproofing: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable not included in the package); during charging, an integrated LED will show the status and will automatically turn off when charging is complete. The charging system automatically prevents undervoltage, overvoltage and has an integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, resists traction of up to 30 kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL1-2019 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x Red LED + 1x Blue LED
Operating Modes: 4 light powers, selectable with the specific dedicated button + Red Light + Blue Light + Flashing Red / Blue
Power and Durability: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> Red Light -> Blue Light -> Red / Blue Flashing
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m in height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional red light - Additional blue light

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m. of height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRI

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Made in Italy -

Mold For Ferratelle - Heart

Mold for pizzas, waffles and waffles. With this mold must be used for firing a flame and turn the mold and cook the cookie from both sides.

Depending on the mold can be sweet or savory different design, texture and thickness.

Recipe for waffles:  3 eggs, 150 grams of butter, 3 tablespoons sugar, 6 tablespoons flour, grated lemon zest, a pinch of salt  oil, icing sugar. Cream the butter until it is foamy, then incorporate the egg yolks, sugar, flour, a pinch of salt and the lemon zest. Mix well with a spatula. Whisk the egg whites until thick and add these to the mixture, stirring gently. Heat the mold and grease the plate with a little bit of oil. Closing the mold and cook on both sides of gas or electric stove. Remove the pod and roll on 'special wooden cone and let it cool. Once cooled you can fill with whipped cream and strawberries with jam, chocolate etc.

Alexander - Set of 6 forged table forks - Last ONE - Made in Italy

Five steps to make a quality product.

To make the steel from the rods for Alexander cutlery, five careful, time-consuming and expensive processing stages are required:

forging from hot bars of stainless steel

hot coining

shearing of profile and interior 

roughing and bending  tempering.

In addition to the above-mentioned phases, there are the normal finishing operations (mirroring, machining of the fork tines, machining of the handle). The tines of the forks, unlike those of stamped cutlery, are thin, hand-turned, close-set and pointed. Handcrafted forged cutlery in stainless steel, with a black bakelite handle polished by hand with mirror blades.

Specifications

Brand Alexander

Total length 20,50 cm

Material Handle synthetic

Intended use: Sports

Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground

Intended use: Sports

Type of production: Industrial
Blade: Stainless Steel VG-10
Blade treatment: satin
Production Country: Japan
Handle: FRN liners with embedded stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15.5mm.
Weight: 94g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Full-Flat Grind

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Desert Warfare
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

Type of production: Industrial
Country of production: China
Blade: Swedish Sandvik 12C27 steel, with Rockwell hardness of 58-60 HRC
Handle: in steel
Blade length: 68mm.
Blade thickness: 2.5mm.
Total length: 166mm.
Weight: 90g.
Clip: in steel
Packaging: cardboard box
Note:

Tools present:

- scissors
- clip
- main blade

With the Boker Camp Knife, one of the forefathers of all modern multi-purpose pocket knives, our history began in the year 1869. After almost 150 years of successful market presence, the time came to convert this proven concept into a modern knife. The modernized construction, which is based on solid steel liners, is embedded in two contoured handle scales, made out of black G-10. The Swedish Sandvik 12C27 steel, with a Rockwell hardness of 58-60 HRC, provides outstanding edge retention of the hollow ground blade. The high quality manufacturing, with a smooth blade action and optimized operability, are proof of the premium quality of our Boker Plus Tech Tools.

Glass breaker
flat screwdriver with cap lifter and wire stripper
small serrated blade with flat screwdriver
cork screw
lanyard hole
clip

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Taiwan
Blade: Steel D2
Blade treatment: stonewashed
Handle: steel liners and G10 grips
Blade length: 87mm.
Blade thickness: 3.5mm.
Overall length: 213mm.
Weight: 157g.
Clips: stainless steel, type deep pocket
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - opening system Carson Flipper

* Type: Previously purchased and used
* Condition: Like new
* Commercially available: yes
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: yes
* Checked and Certified by our internal laboratory

Intended use: EDC / Sports

Type of production: Industrial
Country of manufacture: Taiwan
Blade: VG-10 stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 47mm.
Blade thickness: 1.7mm.
Total length: 115mm.
Weight: 31g.
Clip: titanium
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker

While we've seen plenty of Boker products over the years, resourceful knife makers continue to find ways to surprise us. For example, Brad Zinker from Florida with his Urban Trapper, one of the thinnest profile titanium framelocks we've ever experienced. With just 8mm grip thickness (without clip), the term "slim" only inadequately describes the Urban Trapper for its usable size.

The large holes and titanium transform the Urban Trapper into a real featherweight of just 48 g that can be carried extremely comfortably both in a suit pocket and in light summer trousers. Considering the overall minimalist design of the knife, the size of the flipper is equally reserved.

When used, it still impresses with its outstanding functionality and reliably opens the blade on VG-10 ball bearings. The blade shape of this classic trapper pocket knife, widely distributed in the United States and worn for many years by Brad Zinker, was the inspiration for this unusual piece.

Semi-rigid PVC patch, with 3D embossed workings.
Diameter 85mm

100% original ExtremaRatio
Fastened by Velcro, with laser-cut edges, available in 4 different versions (selectable when ordering):

* Original Black (black background, gray logo)
* Army OD Green (green background, gray logo)
* Desert Brown (desert background, brown logo)
* Glow in the Dark Black (black background, gray logo that glows in the dark)

ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather

Intended Use: Hunting / Outdoor

Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.

Cast iron teapots were invented in ancient China and later developed by the Japanese who made them both functional and decorative.

A specific treatment to the teapot allows cast iron impurities to be removed, and an additional enameling process protects its interior over the years.

Cast iron teapot magenta enamelled (inside) with internal steel filter.

Pour water at the right temperature for the chosen Tea.

Place the leaves in the filter. Respect the infusion time.

If you use the teapot to boil water, you should remove the filter while boiling and use a flame spreader to be placed between the teapot and the gas flame.

To make the best use of cast-iron teapots and make them last over time, it is advisable to precede the first use with this procedure: pour plenty of boiling water into the teapot, leave it there for a few minutes then throw it away. Repeat this 3-4 times, then dry the teapot with a cloth. Afterwards, it will be sufficient to remember never to wash it with detergent and to dry it immediately with a cloth after washing.

You should also avoid putting the cast iron teapot in contact with oil or salt because it may ruin the inner enamel.

Beautiful BLACK tetsubin style hobnail teapot.

Stunning BLACK coloured cast iron teapot with removable tea infuser basket.

Hobnail design. This very sturdy teapot is particularly adept at keeping the tea piping hot for long periods.

Enamel coated interior.

Maximum Teapot capacity is 1000 ml.

Normal usage capacity is 600ml.

This teapot is perfectly sized to serve 1-2 large cups or many small cups in gong fu style. We highly recommend using a trivet as the teapot can become quite hot.

This teapot can also be used as a kettle on a gas or wood burning stove to boil water.

CAPACITY: 0,8 L

Decora - Gulp Chocolate Egg Mold Kit

Kit consisting of 2 polycarbonate egg molds and 4 chromed springs, perfect for making chocolate eggs in a single step. Practical step-by-step brochure contained inside. If you want to get colored eggs, brush the mold with fat-soluble dye or add it to melted chocolate. You can also paint floral motifs or abstract decorations. Have fun customizing eggs with decoracroissant in royal ice or using decoraready to use sugar.

Size: 250 g 

Cavity of 135 x 205 x 75 h mm

Mold 275 x 175 x 22 h mm.

How to do: Correctly temper the chocolate, pour it into one of the two cavities, overlap the second mold and fix it to the other using the chromed springs. With rotating movements distribute the chocolate on the surface of both molds. Leave to cool preferably at a temperature of 19 ° / 23 ° C for about 30 minutes before removing the whole egg from the mold.