Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane Sibert

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES,  has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratory

Intended use: hunting/hiking

Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper Voxnaes

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpening: factory
* Marks on blade: none
* Marks on handle: none
* Box: in original Maserin cardboard
* Sheath: -
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and certified by our internal laboratory

Intended use: Tactical/Sports

Type of production: Industrial
Blade production: Italy
Blade: N690Co steel
Blade Treatment: -
Handle: Aluminum with Ebony insert
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 140mm.
Total length: 235mm.
Balancing: -
Weight: 166g.
Closure: Back Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available 
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos. 
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.

Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.

Intended use: utility/military

Type of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy Lee

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/Emergency

Type of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for optics

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / Collection

Type of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Type of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal Glesser

Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.

Intended Use: Collection/Sportsman

Type of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent condition

H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.

Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.

Intended use: Sports / Tactical

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logos

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.

Intended Use: Sporting

Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken Onion

MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor

Verwendungszweck: Sporting/EDC

Produktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-Logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in good condition
* Commercially available: discontinued
* Sharpening: professionally re-sharpened.
* Marks on blade: small abrasions given by insertion in Kydex sheath.
* Marks on handle: small abrasions in a couple of places.
* Box: Nylon pouch.
* Scabbard: made of Kydex
* Manuals, Certificates and Warranties: missing.
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Production type: MidTech
Country of manufacture: USA
Blade: full tang, D2 steel
Blade finish: microbead blasting
Handle: G10 green
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 230mm.
Weight: 368g.
Sheath: kydex, thermoformed, with Tek Lok type attachment
Packaging: nylon pouch, with zipper closure and Medford logos
Notes: designed and built by Greg Medford

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, unused
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard:/
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 216mm.
Weight: 122g.
Closure: Back Lock
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: discontinued item, like new, from private collection

Piscitelli - Hunt horn hammered blade - CCC03/2 - handmade knife KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Type: Previously Purchased
• Condition: like new
• Available in commerce: NO the craftsman stopped producing knives a few years ago
• Sharpening: Original
• Marks on blade: NO
• Marks on handle: NO
• Packaging: YES
• Checked and Certified by our internal laboratory

Typical knife for the hunter. It is a robust and concrete knife. The tip is slightly lowered to work in cavities, and the blade has a deep curve for skinning.

Features:

• steel: AISI 420
• hardness: 54/56 HRC
• total length: 18cm
• blade length: 7.5cm
• blade thickness: 2mm
• weight: 68gr
• fittings: horn
• notes: handcrafted
• accompanied by a warranty certificate

Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style and Tradition allow us to give importance and originality to our creations handed down from generation to generation.

Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.

When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).