Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini
-
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Fox - Golok Hitam Machete - Fighting Knife - PRIVATE COLLECTION - FX-9CM02B - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: good condition
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on blade: signs of wear on blade.
* Marks on handle: none
* Box: lacking original packaging, sold with scabbard only
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory Coltelleria Collini
Intended Use: Tactical / HikingType of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRCAP-9CM02B-US -
Boker Plus - Urban Trapper by Brad Zinker - 01BO730 - folding knife
* Type: Previously purchased and used
* Condition: Like new
* Commercially available: yes
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: yes
* Checked and Certified by our internal laboratoryIntended use: EDC / Sports
Type of production: Industrial
Country of manufacture: Taiwan
Blade: VG-10 stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 47mm.
Blade thickness: 1.7mm.
Total length: 115mm.
Weight: 31g.
Clip: titanium
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker
While we've seen plenty of Boker products over the years, resourceful knife makers continue to find ways to surprise us. For example, Brad Zinker from Florida with his Urban Trapper, one of the thinnest profile titanium framelocks we've ever experienced. With just 8mm grip thickness (without clip), the term "slim" only inadequately describes the Urban Trapper for its usable size.The large holes and titanium transform the Urban Trapper into a real featherweight of just 48 g that can be carried extremely comfortably both in a suit pocket and in light summer trousers. Considering the overall minimalist design of the knife, the size of the flipper is equally reserved.
When used, it still impresses with its outstanding functionality and reliably opens the blade on VG-10 ball bearings. The blade shape of this classic trapper pocket knife, widely distributed in the United States and worn for many years by Brad Zinker, was the inspiration for this unusual piece.
BO-01BO730 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP