Outdoor
-
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDC -
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDD -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Fallkniven - DC521 - Whetstone to Diamond and Ceramic
<p>Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.</p>
<p>Dimensions of 55mm in width, 210mm in length and 6mm in thickness</p>
<p>Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.</p>F-DC521 -
Fallkniven - DC3 - Affiatore Ceramica e Diamante - coltello
Pietra a secco per affilatura con un lato in ceramica grana 6000 e con un lato al diamante da 25 micron (grana 600) a grana fine. Dimensioni di 25x75 mm.
E' accompagnata da un comodo e robusto astuccio in cuoio nero ed è l'ideale per peso e dimensione da portare sempre con se in escursione per rapide ma efficaci affilature da campo.
Livello qualitativo: ottimoF-DC3 -
Fallkniven - DC4 - Sharpener Ceramic and Diamond - Stone
Dry stone for sharpening ceramic grain with one hand and with one side to the 6000 diamond 25 micron (600 grit) to fine-grained. Size of 32x100 mm.
And 'accompanied by a convenient and robust black leather case and is the ideal size and weight to carry always with you on a hike to quick but effective sharpening field.
Quality: very good
F-DC4