Passion for knives

Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 pieces

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available 
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos. 
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."

The handle uses the brand new UltreX SureTouch composite in modified G-10.

SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/Emergency

Type of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for optics

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition is a limited series version of only 250 pieces that preserves intact all the features of the famous Caimano Nero N.A. model, a non-automatic version of the tactical knife that Extrema Ratio delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy.

The Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also an Extrema Ratio 25th Anniversary commemorative coin and metal plaque with the progressive number of the limited series.

Intended Use: Tactical/Military

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of Production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 231mm.
Weight: 180g.
Closure: Liner Lock with additional safety catch, when knife is open
Clip: deep pocket, reversible and removable, stainless steel
Notes: Limited edition made of only 250 pieces accompanied by polypropylene case and commemorative coin

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially Available Available.
* Sharpening: Factory.
* Marks on blade: A couple of light marks on burnishing.
* Marks on handle: Slight signs of wear on hardware and clip.
* Box: Present, but not in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: stainless steel removable and reversible
Packaging: cardboard box with Extrema Ratio logos

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting

Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

NANO is the latest knife in the hi-tech family, an ideal partner for everyday activities.

The blade is made of CPM MagnaCut steel with satin finish equipped with the "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.

The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.

The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.


Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Canvas Micarta
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 99g.
Closure: Frame Lock 
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearings

NANO is the latest knife in the hi-tech family, an ideal partner for everyday activities.

The blade is made of CPM MagnaCut steel with satin finish equipped with the "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.

The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.

The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.




Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Canvas Micarta
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 99g.
Closure: Frame Lock 
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearings

The AD-10 Lite is the cheaper version of the AD-10 folder with which it shares most of the features, style and high-performance potential such as our unique Tri-Ad Lock, blade configurations and steel thickness. However, we chose to use less expensive materials in manufacturing: for example, instead of G-10 handles we used GFN and for the blade steel we chose to use an AUS 10A instead of CPM-S35VN while still remaining razor sharp and ready for action!

Intended Use: Sport/Utility

Production Type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel AUS-10A
Blade finish: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 222mm.
Weight: 186g.
Locking system: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Intended use: Collection / Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: D2 58/61HRC steel
Blade finish: satin-finished
Handle: G10 and anodised titanium
Blade length: 93mm.
Blade thickness: 3.8mm.
Length closed: 122mm.
Total length: 215mm.
Thickness when closed: 10mm.
Weight: 88g.
Closure: Frame Lock with removable stainless steel hinge
Clip: Inoz steel, removable, placed on the back of the knife
Notes: Ball bearing opening movement - Design by Attilio "Atti" Consoli

Intended use: Collection / Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: D2 58/61HRC steel
Blade finish: satin-finished
Handle: titanium, with anodised screws
Blade length: 93mm.
Blade thickness: 3.8mm.
Length closed: 122mm.
Total length: 215mm.
Thickness when closed: 10mm.
Weight: 94g.
Closure: Frame Lock with removable stainless steel hinge
Clip: Inoz steel, removable, placed on the back of the knife
Notes: Ball bearing opening movement - Design by Attilio "Atti" Consoli

Intended use: Gentleman/EDC

Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Purple Dark Carbon Fiber
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Sport

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: black Idroglider stone washed
Handle: black G10
Blade length: 64mm.
Blade thickness: 4mm.
Closed length: 90mm.
Total length: 157mm.
Closed thickness: 12mm
Weight: 90g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zip pouch
Note: -

Intended use: Sport

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59/60HRC stainless steel
Blade finish: stone washed
Handle: Aluminum
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Closed thickness: 18mm
Weight: 154g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zipped case
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: Sport

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59/60HRC stainless steel
Blade Finish: Top Shield® black
Handle: Brown aluminum
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Closed thickness: 18mm
Weight: 153g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zipped case
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: Sporting

Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

Translated with www.DeepL.com/Translator (free version)

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

Intended Use: Sporting / Collection 

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390
Blade finish: Black PVD
Handle: Titanium
Blade length: 115mm. (wire length 95mm.)
Blade thickness: 4mm.
Total length: 255mm.
Weight: 138g.
Locking system: not present
Clip: not present
Packaging: Cardboard box with Fox logos - Leather pouch
Notes: Design by Vincenzo Fiore, designer specializing in balisongs - Each piece is numbered, but this is not a limited edition.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390
Blade finish: Satin
Handle: Titanium
Blade length: 115mm. (edge length 95mm.)
Blade thickness: 4mm.
Total length: 255mm.
Weight: 138g.
Locking system: not present
Clip: not present
Packaging: Cardboard box with Fox logos - Leather pouch
Notes: Design by Vincenzo Fiore, designer specialised in balisong - Each piece is numbered, but this is not a limited edition.

Intended Use: Tactical/Emergency

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Desert Warfare
Handle: Anodized Anticorodal Aluminum
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 134mm.
Total length: 225mm.
Thickness when closed: 24mm.
Weight: 162g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Extrema Ratio logos
Notes: belt cutter, glass breaker, optics screwdriver

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

With the Boker Plus Epicenter Backlock, U.S. designer Todd Rexford has created a knife of impressive proportions that combines the irrepressible forces of nature and unleashes an uncontrollable tremor in the center of knife enthusiasts' emotions.

With the yellow and black color combination of the all-G10 shaped handle, the Epicenter ranks right at the top of the Richter scale. Only the sturdy backlock can tame the elemental force this pocket knife can generate, securely locking the blade in place.

The brass lanyard hole and the ring on the blade axis screw add to the appeal of this natural phenomenon and inevitably make your hands shake.



Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3.7mm.
Length when closed: 120mm.
Total length: 210mm.
Weight: 130g.
Clip: stainless steel, removable
Closure: Back Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Todd Rexford

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: M398 61/62 HRC stainless steel
Blade finish: PVD stone washed
Handle: titanium
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 145g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: stone washed
Handle: Blue anodized aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 116g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Black PTFE
Handle: OD green anodized aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 117g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended Use: Sport/Utility

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Black Coating
Handle: Griv-Ex™
Blade Length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 91mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 132g.
Clip: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -

Intended Use: Sport/Utility

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS 10A
Blade treatment: Stone Wash
Handle: Griv-Ex™
Blade length: 100mm.
Blade thickness: 3.8mm.
Total length: 250mm.
Weight: 288g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium 
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended use: sporting/collection

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade finish: Stone Washed
Handle: G10
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 110g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M398 61HRC
Blade finish: Satin
Handle: HDL carbon fiber
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 106g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper Voxnaes

Intended use: sports / collection

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59 / 60HRC stainless steel
Blade finish: PVD
Handle: HDL carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Closing mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended Use: Sporting

Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Intended Use: Sporting

Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4mm.
Length when closed: 108mm.
Total length: 188mm.
Weight: 135g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Jesper Voxnaes

Designed as an everyday companion for heavy-duty use, Engage is an easy-to-carry knife with a wide 3.5-inch S35VN stainless steel blade for superior strength and edge retention. Featuring Cold Steel's Atlas™ lock that provides a consistent, durable and reliable lock; fully ambidextrous and able to handle any task. The easy-to-grip G-10 handle is built to be durable, and the satin-finished clip blade allows for precise and effective cutting.


Intended Use: Sporting/Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S35VN
Blade Finish: Satin finish
Handle: G-10
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 221mm.
Weight: 187g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Chemical Black
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper Voxnaes

Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with his strength:

has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment:
Handle: titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 118g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant fully recyclable cardboard box
Notes: Carson Flipper opening system on ball bearings

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: Titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 134g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

NON-automatic version of the Caimano Nero model

The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.

Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.

It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.

The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.

Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.

Destination of use: Tactical/Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is open

The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.

The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

This model originates from Col. Rex Applegate's project the "Boker Smatchet", developed as a large combat knife, also perfect as a multifunctional tool for outdoors.

Starting from that project, Chuck Gedraitis' new Boker Plus Pocket Smatchet combines the design of the famous classic with the advantages of a practical pocket knife.

The sturdy Pocket Smatchet features a VG-10 Spearpoint blade, featuring a durable stonewash finish. The removable thumb pin on the back of the blade allows for ambidextrous opening, while the linerlock reliably locks it in place. The sturdy clip is milled from solid and also features the characteristic indentations of the classic Smatchet. With lanyard hole and high quality nylon case for storage.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: stonewash
Handle: in micarta
Blade length: 95mm.
Blade thickness: 3.9mm.
Weight: 207gr.
Total length: 235mm.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Note: design by Chuck Gedrait

With this exclusive edition of Coltelleria Collini in collaboration with Fox we chose to match a model with a particular design like the Yaru with a Japanese powder (sintered) and rolled steel (SanMai) by Takefu Steel. 

For this project we chose to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and sharpening durability, while at the same time ensuring a remarkable resilience and resistance to oxidation due to the blade lamination process. 

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Treatment: Satinized
Sleeve and screws: carbon fiber "Space Coral", Frame and screws in Titanium PVD Stonewashed
Blade length: 70mm.
Blade thickness: 4mm.
Length closed: 105m.
Total length: 175mm.
Thickness when closed: 16mm
Weight: 95g.
Closure: Frame Lock with stainless steel casement
Clip: Stonewashed PVD titanium, billet machined
Scabbard: Zip pouch
Package: Cardboard box with Fox Knives logos 
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive Coltelleria Collini's version, Sprint Run in only 6 not numbered pieces, with Japanese stainless steel Takefu Steel SPG2 Rolled.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended Use: Sporting / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finish

Intended use: sporting

Production type: Industrial
Country of production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finishing: Black Cerakote
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Locking mechanism: Liner Lock
Clip: Removable and reversible, in stainless steel
Package: Cardboard box with Fox Knives logos 
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: stonewashed
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Locking mechanism: Liner Lock
Clip: Removable and reversible, in stainless steel
Package: Cardboard box with Fox Knives logos 
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes