Passion for knives
-
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Cold Steel - Nightshade - FGX Karambit - 92FK - coltello
Cold Steel presenta Nightshade Series, una nuova serie di coltelli da allenamento, simili in tutto e per tutto a veri coltelli cold steel o a modelli di nuovo design ma costruiti interamente in Grivory, l'ultimo ritrovato della tecnologia per quanto riguarda la termoplastica rinforzata al Nylon e resistente più del doppio rispetto allo Zytel.
Un ulteriore fattore qualitativo di questi coltelli è rappresentato dalla manicatura in Kraton per assicurare il miglior grip possibile in ogni situazione. I coltelli sono inoltre leggerissimi e resistenti a caldo, freddo e amolte sostanze acide.
Peso: 100g.
Spessore: 7.5mm.
Lunghezza Lama: 110mm.
Lunghezza Impugnatura: 145mm.
Materiale: Grivory e Kraton
Lunghezza Totale: 220mm.CS92FK -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Boker - Magnum Collection knife 2009 - 02MAG2009 - knife
RETIRED KNIFE FROM A PRIVATE COLLECTION - 2009 edition limited to 1999 pieces
* Type: Previously purchased
* Conditions: In like new condition
* Available on the market: no longer in production, difficult to find
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, rigid case with Boker Magnum Collection 2009 logos
* Sheath: leather sheath
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 185mm.
Blade thickness: 6.5mm.
Total length: 315mm.
Weight: 515g.
Sheath: Black leather
Packaging: Rigid case with Boker Magnum Collection 2009 logos
Notes: Limited and serialized edition of only 1999 pieces worldwideBO-02MAG2009 -
Boker - Magnum Collection knife 2010 - 02MAG2010 - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA - Edizione del 2010 limitata a 1999 pezzi
* Tipologia: Precedentemente Acquistato
* Condizioni: In condizioni pari al nuovo
* Reperibile in commercio in commercio: non più in produzione, di difficile reperibilità
* Affilatura: Originale
* Segni su lama: no
* Segni su impugnatura: no
* Scatola: originale, cofanetto rigido con loghi Boker Magnum Collection 2010
* Fodero: fodero in cuoio
* Manuali, Certificati e Garanzie: originali
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Sportivo/Collezione
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox 440C
Trattamento Lama: Satinata
Manicatura: White Micarta
Lunghezza lama: 180mm.
Spessore lama: 6,5mm.
Lunghezza totale: 320mm.
Peso: 435g.
Fodero: Cuoio nero
Confezione: Cofanetto rigido con loghi Boker Magnum Collection 2010
Note: Edizione limitata e serializzata di soli 1999 pezzi in tutto il mondoBO-02MAG2010 -
Buck - Buckmaster 184 - 1984 First Production - PRIVATE COLLECTION - vintage knife
Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.
Intended Use: Sporting / CollectionType of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.CP-BUBM1984 -
Cold Steel - Vintage Gen I Trailmaster - Made in USA - PRIVATE COLLECTION - 16 - knife
Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.16CP -
Tops - Operator 7 - Blackout Edition - OP7-02 - Knife
Intended use: Tactical / Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1075 - 56 / 58HRC carbon steel
Blade treatment: Black Traction Coating
Handle: G10 Black
Blade length: 184mm.
Blade thickness: 7.8mm.
Total length: 318mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Design by Leo EspinozaOP702 -
Bark River - Bravo Survivor knife A2 - Green Canvas - BA07116MGC - knife
Intended use: Outdoor / Tactical
Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 315mm.
Balancing: advanced
Weight: 480g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -
Send feedback
History
Saved07116MGC -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Cold Steel - Laredo Bowie O-1 Steel - 39LLBMT - knife
Intended use: Sports / Hunting / Collection
Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -39LLBMT -
Ontario Knife Company - SP10 Raider Bowie - 8684 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8684 -
Tops - Operator 7 knife OP701 - knife
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 184 mm.
Blade thickness: 7.8mm.
Total length: 318 mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo EspinozaThe Operator 7 is huge! TOPS Knives went well with heavy steel and handles to make a hefty, well-balanced knife. It also has those classic American fighting knife aesthetics that make it look as good as it will perform.
Made out of 5/16 "thick 1075, the differentially heat-treated blade with a very strong thorn. The entire handle is also over 1 "thick once assembled to fill out the user's hand much like an ax or hatchet handle would.
Because it is a tool, it's got to be comfortable. It's made for the men that do not back down. This knife will find its place with door kickers, survivalists, and weekend warriors alike. The rounded handles and hand guards make it a joy to use and the finger choil allows the user great precision for finer cuts. The 6.5 "of cutting edge will help you get the work done." The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself.
OP701 -
Kukri Artigianale - Bahadur Gripper corno - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a manoBAHA20 -
Kukri Artisan - Chainpure 13 - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeCHAIN13 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handCHAIN15 -
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Intended Use: Collection / Sports / Tactical
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-460 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handKU027 -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Boker Magnum - 2014 Collection - Elmer Keith Knife by Dennis Friedly - 02MAG2014 - knife
Intended use: Collection / Sports
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Satin
Handle: Micarta
Blade length: 190mm.
Blade thickness: 8mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: -
Weight: 578g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Gift Box hard drive with logos Boker Magnum Collection 2014
Note: Specimen limited edition, made in 1999 pieces individually numbered sequentially. Design by Dennis FriedlyBO-02MAG2014 -
Sog - Voodoo Hawk - F18/N - Tomahawk
Type of production: Industrial
Production Lama: China
Blade: stainless steel 3CR13
Treatment Blade: Teflon
Handle: Nylon and Glass Fiber
Blade length: 89mm.
Blade thickness: 8mm. in the central point
Length closed: -
Total length: 317mm
Thick when closed: -
Balance: -
Weight: 807g.
Closing: -
Clip: -
Sheath: Nylon
Packing: pack with logos Sog
Notes: -10127 -
Hollywood Collectibles Group - Rambo IV knife - Standard Edition - knife
Intended use: Survival / Collection
Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license6513N€0.00Only -99 leftOut of stock -
Boker - Magnum Collection 2011 by Vox - 02MAG2011 - coltello
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox 440C
Trattamento Lama: Satinata
Manicatura: Green Linen Micarta
Lunghezza lama: 155mm.
Spessore lama: 7mm.
Lunghezza totale: 293mm.
Peso: 388g.
Fodero: Cuoio nero
Confezione: Cofanetto rigido con loghi Boker Magnum Collection 2011
Note: Edizione limitata e serializzata di soli 1999 pezzi in tutto il mondo - Design by Jesper VoxnæsBO-02MAG2011 -
Cold Steel - Laredo Bowie Knife SK-5 Steel - 39LLBT - coltello
Destinazione d'uso: Caccia
Tipo di produzione: industriale
Lama: in acciaio SK-5
Trattamento Lama: -
Produzione Lama: Cina
Manicatura: Legno
Lunghezza lama: 265mm.
Spessore della lama: 7.5mm.
Lunghezza chiuso: -
Lunghezza totale: 398mm.
Bilanciatura: avanzata a 3.5cm dal ramo di guardia inferiore
Peso: 445g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Note: -39LLBT -
Koji Hara - KJ4 in Radica - coltello artigianale
Coltello integrale realizzato artigianalmente dal noto knifemaker giapponese Koji Hara
Destinazione d'uso: collezione
Tipo di produzione: artigianale
Produzione Lama: giappone
Lama: in acciaio inox ATS-34
Trattamento Lama: -
Manicatura: Radica
Lunghezza lama: 60mm.
Spessore della lama: 7.5mm.
Lunghezza chiuso: -
Lunghezza totale: 160mm.
Bilanciatura: -
Peso: 70g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: unico pezzo disponibile4055€278.69Out of stock -
Master Cutlery - Rambo IV - John Rambo Limited Edition - knife
Destinazione d'uso: Survival/Collezione
Lama: in acciaio al carbonio 1060
Produzione Lama Cina
Manicatura: Cuoio nero
Lunghezza lama: 290mm.
Spessore della lama: 7mm.
Lunghezza chiuso: -
Lunghezza totale: 460mm.
Bilanciatura: avanzata a 4 cm.
Peso: 820g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: edizione a tiratura limitata con firma di "Sylvester Stallone" su lama e fodero.6513€0.00Only -99 leftOut of stock -
Takeshi Saji - Yuh-Yuh-Nata - custom knife
Takeshi Saji - Yuh-yuh-Born - custom knife
Intended Use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Hand-forged, carbon steel Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Wood riveted
Blade length: 200mm.
Blade thickness: 7mm.
Closed Length: -
Overall length: 370mm.
Thick when closed: -
Balancing: -
Weight: 416g.
Closed: -
Clip: -
Sheath: Wood and leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-4017 -
Tops - B.E.S.T. - Black Eagle Strike Team - BEST Micarta - coltello
Nuova versione 2014, con acciaio 5160
Questo coltello è stato progettato per il reparto speciale BEST "Black Eagle Strike Team".Questa unità può rapidamente raggiunge e operare in qualsiasi ambiente, individuando, distruggendo o sabotando le linee nemiche, i radar, le stazioni missilistiche.
Destinazione d'uso: hard Utility
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 5160
Trattamento Lama: Heat Treated 2XBlack Traction Coating
Manicatura: Micarta
Lunghezza lama: 175mm.
Spessore lama: 7mm.
Lunghezza totale: 315mm.
Bilanciatura: arretrata, ad 2cm. dal ramo di guardia
Peso: 538g.
Fodero: combat ballistic nylon
Confezione: busta con certificati di garanzia e numeri di serie5801 -
Wildsteer - Black Steer - coltello per arciere
Destinazione d'uso: arceria/escursionismo/caccia/collezione
Tipo di Produzione Industriale
Lama: acciaio inox Sandvik 13C26
Produzione Lama Francese
Manicatura: cuoio
Lunghezza lama: 130mm.
Spessore della lama: 7.5mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, ad 2cm. dal ramo di guardia
Peso: 277g.
Fodero: in cuoio con acciarino incorporato
Confezione: scatola di cartone6374€221.31Out of stock -
Wildsteer - Gold Steer - coltello per arciere
Destinazione d'uso: arceria/escursionismo/caccia/collezione
Tipo di Produzione Industriale
Lama: acciaio inox Sandvik 13C26
Produzione Lama Francese
Manicatura: cuoio
Lunghezza lama: 130mm.
Spessore della lama: 7.5mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, ad 2cm. dal ramo di guardia
Peso: 277g.
Fodero: in cuoio con acciarino incorporato
Confezione: scatola di cartone6375€221.31Out of stock -
Wildsteer - Wild Tactic - coltello
Destinazione d'uso: arceria/escursionismo/tattico/collezione
Tipo di Produzione Industriale
Lama: acciaio inox Sandvik 13C26
Produzione Lama Francese
Manicatura: Kraton
Lunghezza lama: 130mm.
Spessore della lama: 7.5mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, a 2cm. dal ramo di guardia
Peso: 277g.
Fodero: in nylon con inserto in ABS
Note: il fodero comprende una guaina plastica da applicare al tagliente della lama e un utensile/tagliacavi che permette di agganciare al coltello anche cacciaviti e punte di trapano6381€237.70Out of stock -
Wildsteer - Wild Tactic PVD - coltello
Destinazione d'uso: arceria/escursionismo/tattico/collezione
Tipo di Produzione Industriale
Lama: acciaio inox Sandvik 13C26 con trattamento PVD
Produzione Lama Francese
Manicatura: Kraton
Lunghezza lama: 130mm.
Spessore della lama: 7.5mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, a 2cm. dal ramo di guardia
Peso: 277g.
Fodero: in nylon con inserto in ABS
Note: il fodero comprende una guaina plastica da applicare al tagliente della lama e un utensile/tagliacavi che permette di agganciare al coltello anche cacciaviti e punte di trapano6381B€237.70Out of stock