Passion for knives

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

COL MOSCHIN Paper Knife is a taglicarte whose outline is faithfully derived from one of the most iconic knives of our production, the Col Moschin model, adopted by the 9th Parachute Assault Regiment "Col Moschin."

This instrument is part of a larger collection.

COL MOSCHIN Paper Knife is not only a decorative and evocative accessory, but it also has all the tactical features that are part of Extrema Ratio's DNA.

It features nylon grips and a sturdy steel blade that echoes the same shape as its big brother.

COL MOSCHIN Paper Knife is very practical and convenient for the office or home office and is also perfectly suited as an original gift idea.

Intended Use: Collection/Tactical/Military

Country of manufacture: Italy
Blade: stainless steel NOT SHARPENED
Blade Finish: Burnishing MIL-C-13924
Handle: nylon
Blade length: 100mm.
Blade thickness: 1.5mm.
Total length: 180mm.
Weight: 45g.
Sheath: -
Packaging: cardboard box with Extrema Ratio logos.
Notes: -

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

We are proud to present a true gem in the world of knives: the exclusive Wander Tactical model, Mistral XL. This extraordinary edition is distinguished by its elegance and refinement, with a Raw Finish blade treatment that captures the essence of craftsmanship, coupled with a G10 desert handle, which not only offers a high-end aesthetic but also ensures a solid and comfortable grip.

This production is extremely limited and unique, made in only 4 separate pieces, making each one a collector's item with collector's value. The knife we present here is number 3 in this exclusive series, as confirmed by the certificate of authenticity.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw
Handle: G10 Desert
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 310mm.
Balance: set back about 2cm. from the guard branch
Weight: 419g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt loop
Packaging: accompanied by polypropylene case 
Notes: limited series of four pieces different from each other, specimen #3 of #4

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.

Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.

Intended use: utility/military

Type of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collection

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Ironwood, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: Set back 3cm from the guard branch
Weight: 179g
Sheath: Hand-stitched and crafted leather
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 310

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Stabilized Birch, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: shifted 3cm back from the guard branch
Weight: 179g
Sheath: hand-stitched and crafted leather
Packaging and Certificate: Cordura case and authenticity certificate
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 309

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way. 

The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

After the France, Amour and Escapade editions, discover the Nature edition!

An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

Discover pocket knife N°08 by Rommy González, a Chilean artist who decided to highlight mycelium and the fungi it produces. Her drawings were transcribed on the knife's fascinating handle using the sublimation method. The 8.5-cm blade is made of stainless steel.

Intended Use: Collection

Type of production: Industrial
Country of manufacture: France
Blade: 12C27 stainless steel
Blade finish: satin-finished
Handle: wooden, with 3D sublimation decoration
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Winner of the "Most Innovative Imported Design" at the Blade Show in 2023, this knife is designed by Attilio Morotti made in collaboration with Sandrin knives that supplies the tungsten carbide blades that, made through a sophisticated machining process, reach the extraordinary hardness of 71 HRC, yet at the same time maintaining a high twisting capacity and resilience.

Intended Use: Sporting / Collection

Country of manufacture: Italy
Total length: 150mm
Blade length: 80mm
Blade thickness: 1.5 mm
Blade material: polyhedral tungsten carbide 71 HRC hardness
Handle material: forged Fat Carbon fiber
Weight: 78 grams
Pocket clip: -
Hardware: stainless steel
Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
Notes: Design by Attilio "Atti" Morotti - Blades by Sandrin Knives - Winner at the Blade Show 2023 of "Most Innovative Imported Design"

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.

The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

Intended use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: Full tang in NIOLOX stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 243g.
Sheath: Thermoformed kydex, with Tek-Lok multi-position attachment
Packaging: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Fixed blade version of the successful folder launched in 2021

Intended use: Utility / Tactical / Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

COL MOSCHIN Paper Knife is a paper knife whose shape is faithfully derived from one of the most iconic knives of our production, the Col Moschin model, adopted by the 9th Parachute Assault Regiment "Col Moschin".

This tool is part of a larger collection.

COL MOSCHIN Paper Knife is not only a decorative and evocative accessory, but also has all the tactical characteristics that are typical of Extrema Ratio's DNA.

It is equipped with nylon grips and a sturdy steel blade that takes up the same shape as its older brother.

COL MOSCHIN Paper Knife is very practical and convenient for the office or home studio and is also perfect as an original gift idea.

Intended use: Collection/Tactical/Military

Country of production: Italy
Blade: NOT SHARP stainless steel
Blade Finish: MIL-C-13924 Bluing
Handle: nylon
Blade length: 100mm.
Blade thickness: 1.5mm.
Total length: 180mm.
Weight: 45g.
Scabbard: -
Packaging: Cardboard box with Extrema Ratio logos with hand-polished plexiglass base in BLACK color with engraved Extrema Ratio logo
Note:

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.

Intended use: Tactical/Military

Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logos

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis Iovito

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 120g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

The World Ski Championships will take place this year in Savoie, Courchevel and Méribel. It was therefore an obvious choice for the brand to join the event and present a unique limited edition knife.

The N°08 Courchevel Méribel 2023 has an 8.5 cm stainless steel blade, a Virobloc safety ring and a beech handle. The latter is decorated by pad printing with the official graphics of the event.

An unmissable memory of this winter that combines know-how and passion for the mountains!

Intended use: Sport / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin
Handle: Wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Closed length: 108mm.
Total length: 190mm.
Closed thickness: 20mm.
Balancing: -
Weight: 58g.
Closure: Virobloc
Clips: -
Scabbard: -
Packaging: Cardboard box with Opinel logos
Note:

Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -

With a lower weight and smaller size than its big brother Big Leuku - the small Leuku is a versatile outdoor tool with properties slightly more similar to those of a bushcraft knife. The little Leuku is an all-round knife, capable of handling everything you can tackle in a woodland environment: cutting, separating bones, carving and many other tasks within the outdoors and wilderness survival.

The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: -
Total length: 265mm.
Balancing: -
Weight: 240g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.

The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.

The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.

The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversary

The Boker Plus Mini Tracker, designed by Dave Wenger, has quickly become a favorite in the bushcraft camping and dust scene, as a sturdy outdoor activity knife thanks to the massive 1095 carbon steel blade and corrosion resistant coating. The large Boker Plus Tracker is following in the footsteps of the small ... same materials, same features, but with unmatched performance! The massive survival knife blade features two different bevel surfaces, ideal for cutting, scraping, digging and prying. The optimal balance between the thickness, the length of the blade and the ergonomic shape of the finely worked micarta handle, allow you to work effortlessly even in extreme environments. The handle has three decorative brass hollow rivets, the back of which can be used as a lanyard hole. Supplied with a belt adapter and a custom made Kydex sheath.

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: a powder cover
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 469 g.
Sheath: in the Kydex
Packaging: cardboard box with Boker Plus logos
Note: design by Dave Wenger

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -

A simple knife that isn't afraid of rough treatment.

Sometimes you need to have a longer blade with you, whether you need to go fishing or make firewood. The P300 is a true universal workhorse that's always at your side thanks to its massive Sleipner steel blade with fantastic cutting performance. But a good tool also needs a reliable and secure handle and in our case this is guaranteed by a G10 composite handle with a rough finish and three massive screws that hold it all together for maximum performance.

Intended use: hiking / utility

Manufacturing Type: Industrial
Blade production: Czech Republic
Blade: full tang, in Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 255g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -

Intended use: Hiking / Hunting

Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.

Intended use: hard utility

Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:

The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.

It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!

The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel

A good blade needs a good grip, so this model of the SR1 is made from G10.

For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.

It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!

The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel

A good blade needs a good grip, so this model of the SR1 is made from G10.

For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Intended Use: Hiking / Heavy Duty

Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaun

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James Helm

Intended use: Hiking / Utility

Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex type

H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.

Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.

Intended use: Sports / Tactical

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logos

Designation of use: Utility

Production type: Industrial
Country of Production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 215mm.
Weight: 181g.
Scabbard: Kydex, with Tek-Lok type fitting
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Midgards Messer

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Neck / Tactical / Military

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.

Intended Use: Utility

Production type: Industrial
Country of Production: Taiwan
Blade: ful tang steel 1095
Blade finish: Powder coated
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 250mm.
Weight: 270g.
Sheath: Kydex
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Dave Wenger

With a stainless steel blade with a polyglass finish, this knife offers exceptional cutting and ease of maintenance. The shape of the handle developed by Opinel guarantees the user an ideal grip. Always equipped with its Virobloc safety ring, the N ° 08 guarantees good reliability. Padouk is highly resistant to moisture.

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror
Handle: Padouk wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Closed length: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 58g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos and black case
Note:

Intended use: Sports / Collection

Type of production: Industrial
Lama production: France
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polished
Handle: Beli wood
Blade length: 82mm.
Blade thickness: 1.5mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 20mm.
Balancing: -
Weight: 58g.
Closing: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard box with Opinel logos and black case
Notes: Limited edition 3500 pieces, not numbered

Intended use: Hunting / Hiking

Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The N ° 08 of the special series Black is equipped with a blade and a virobloc® in stainless steel with a burnishing surface treatment that strengthens the corrosion resistance. The handle is in oak from the French forests

Intended use: Sports / Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: burnishing
Handle: French Oak wood
Blade length: 80mm.
Blade thickness: 1.5mm.
Length closed: 107mm.
Total length: 190mm.
Weight: 42g.
Closure: Viro-Block
Packaging: Wooden box with Opinel logos

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: on the guard branch
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Glock - 78 Field Knife - Olive - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

With saw on the back of the blade.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Type of production: Industrial
Produzionea country: Italy
Blade: full tang, in Niolox stainless steel
Blade treatment: Blackwash
Handle: Micarta
Blade length: 128mm.
Blade thickness: 5mm.
Overall length: 252mm.
Weight: 274g.
Sheath: Leather
Packaging: cardboard box with logos LionSteel
Notes: -

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: micarta green
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

intended use: sports / collection

type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinel

intended use: sports / collection

type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinel

intended use: sports / collection

type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Treatment Blade: satin
manicatura: wood
Blade length: 80mm.
blade thickness: 1.5mm.
closed length: 107mm.
Total length: 190mm.
Weight: 42g.
Lock system: Viro-Block
Package: cardboard box with logos Opinel

Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: Micarta
Blade length: 179mm.
Blade thickness: 5mm.
Overall length: 311mm.
Balance: on guard branch
Weight: 357g.
Sheath: Nylon, with rigid internal
Packaging: cardboard box with Ontatio Knife Company logos

Intended Use: Tactical / Hiking

Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: Orange G10
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security