bing

Passion for knives

Shop By
Shopping Options
Brand
  1. Acta Non Verba 2items
  2. Aitor 3items
  3. Benchmade 117items
  4. BlackFox 12items
  5. Boker 28items
  6. Cold Steel 29items
  7. Consigli 22items
  8. CRKT 15items
  9. Extrema Ratio 57items
  10. Fallkniven 15items
  11. Fox Knives 65items
  12. Ka Bar 11items
  13. Kai Knives 1item
  14. Laguiole en Aubrac 52items
  15. Lion Steel 12items
  16. Maserin 26items
  17. Mcusta 44items
  18. Opinel 17items
  19. Roselli 12items
  20. Saji Takeshi 1item
  21. Spyderco 45items
  22. Viper 43items
  23. Zero Tolerance 29items
  24. Approved 22items
  25. Ahti 9items
  26. Andrew Demko Knives 4items
  27. Bastinelli Knives 6items
  28. Beretta 2items
  29. Berti 1item
  30. Bradley 1item
  31. Brian Tighe and Friends 1item
  32. Browning 2items
  33. Buck 2items
  34. Case 2items
  35. Chris Reeve Knives 4items
  36. Citadel 3items
  37. Corey Sar Fox 2items
  38. Eickhorn 1item
  39. Emerson 8items
  40. Enzo 1item
  41. Esee Knives 7items
  42. Fantoni 8items
  43. Forge de Laguiole 5items
  44. G. Sakai 2items
  45. Gerber 3items
  46. Gilles 5items
  47. Guardian Tactical 2items
  48. Heckler and Kock 1item
  49. Helle 7items
  50. Hikari Japan 1item
  51. Kanekoma 5items
  52. Kershaw 34items
  53. Kiku Knives 1item
  54. La Cantina 1item
  55. Lone Wolf 5items
  56. MedFordKnives 4items
  57. Mercury 1item
  58. MKM 24items
  59. Mora Kniv 1item
  60. Nepal Kukri 6items
  61. Nilte 2items
  62. No Brand 4items
  63. Ontario 6items
  64. Pohl Force 5items
  65. Rockstead 4items
  66. Sandrin Knives 2items
  67. SOG 4items
  68. Steel Will 2items
  69. TB Outdoor 6items
  70. Tops Knives 4items
  71. TRC Knives 1item
  72. White River Knife and Tool 15items
Less
Stock
  1. In Stock 327items
  2. Out of Stock 581items
Rating
  1. 5
    117items
  2. 4
    & up
    280items
  3. 3
    & up
    296items
On Sale
  1. On Sale 31items
Set Ascending Direction

Items 1-48 of 908

Page
  1. Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously purchased.
    * Condition: Never used, but with three marks on titanium anodization.
    * Commercially available: In production
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: 3 scratches on blue anodizing.
    * Box: Present
    * Scabbard: Pouch with zipper.
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our in-house laboratory

     

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Italy
    Blade: M390 59/61HRC stainless steel
    Blade finish: Satin finish
    Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
    Blade Length: 60mm.
    Blade thickness: 3mm.
    Length closed: 90m.
    Total length: 150mm.
    Thickness when closed: 11mm.
    Weight: 95g.
    Closure: FrameLock
    Clip: flush, AISI 302 stainless steel, removable and reversible
    Sheath: zippered pouch, leatherette
    Packaging: cardboard box with Fox Knives logos 
    Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

    FX-540TIBL-CP
    €175.00
    Only 1 left
    Only 1 left
  2. Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife

    KNIFE RETIRED FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: In good condition
    * Commercially available: YES
    * Sharpening: re-sharpened by our in-house laboratory
    * Marks on blade: YES,  has a number of scratches on the blade
    * Marks on handle: None
    * Box: Present and complete
    * Sheath: Leather sheath
    * Manuals, Certificates and Warranties: Present
    * Checked and Certified by our internal laboratory

    Intended use: hunting/hiking

    Type of production: semi-artisanal
    Blade: 12C27 stainless steel
    Handle: Birch
    Blade length: 102mm.
    Blade thickness: 3mm.
    Total length: 221mm.
    Balancing: set back 2.5cm
    Weight: 151g.
    Sheath: leather
    Notes: Design by Jesper Voxnaes

    AP-HE-600
    Special Price €131.15 Regular Price €180.33
    Only 1 left
    Only 1 left
  3. Fox - Anzu by Les George - PVD MagnaCut & Carbon Fiber - FX-560 CFOR - knife

    Intended Use: Sporting

    Type of production: Industrial
    Country of Production:Italy
    Blade:Steel CPM-MagnaCut 59/61HRC
    Blade finish: Black PVD
    Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 111m.
    Total length: 180mm.
    Thickness when closed: 14mm
    Weight: 105g.
    Closure: Verso Lock (modified Axis Lock)
    Clip: removable and reversible, stainless steel Black Idroglider
    Packaging: Cardboard box with Fox Knives logos
    Notes: Design by Les George

    FX-560CFOR
    €168.03
    Only 2 left
    Only 2 left
  4. Boker Plus - Undertow by Lorien Arnold - D2 & Black G10 - 01BO694 - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: China
    Blade: D2 steel
    Blade treatment: satin finish
    Handle: Stainless steel and G10
    Blade length: 87mm.
    Blade thickness: 3.2mm.
    Total length: 200mm.
    Weight: 125g.
    Clip: removable, stainless steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
    Notes: Design by Lorien Arnold - flipper opening system on ball bearings

    BO-01BO694
    €57.38
    Only 1 left
    Only 1 left
  5. Fox - Italico Drop - FX-540OD - Black Top Shield N690Co & OD Green FRN - pocket knife

    "The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

    Intended Use: Sporting

    Type of production: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co 59/61HRC
    Blade finish: Black Top Shield
    Handle: FNR (Fiberglass Reinforced Nylon)
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: 90m.
    Total length: 150mm.
    Weight: 78g.
    Closure: LinerLock
    Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
    Packaging: cardboard box with Fox Knives logos 
    Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

    FX-540OD
    €81.15
    Only 1 left
    Only 1 left
  6. Fox - Italico Drop - FX-540B - Black Top Shield N690Co & Black FRN - pocket knife

    "The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

    Intended Use: Sporting

    Type of production: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co 59/61HRC
    Blade finish: Black Top Shield
    Handle: FNR (Fiberglass Reinforced Nylon)
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: 90m.
    Total length: 150mm.
    Weight: 78g.
    Closure: LinerLock
    Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
    Packaging: cardboard box with Fox Knives logos 
    Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

    FX-540B
    €81.15
    Only 2 left
    Only 2 left
  7. Fox - Anzu by Les George - MagnaCut & Blue Aluminum - FX-560 ALOR - knife

    ANZU is the new knife from Fox Knives inspired by the creature of the Mesopotamian religions; a powerful figure who challenged the authority of the gods by stealing from the god Enlil the Table of Destinies, an object that, when possessed, confers the power to control the Universe. Through this act of rebellion, Anzu became an example of power, strength, precision and determination, characteristics that also distinguish the new Fox Knives knife designed by Les George.


    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture:Italy
    Blade:CPM-MagnaCut 59/61HRC steel
    Blade finish: stone washed
    Handle: anodized aluminum with internal stainless steel folders, anodized aluminum spacer
    Blade length: 80mm.
    Blade thickness: 3mm.
    Length closed: 111m.
    Total length: 180mm.
    Thickness when closed: 14mm
    Weight: 120g.
    Closure: Verso Lock (modified Axis Lock)
    Clip: removable and reversible, stonewashed stainless steel
    Packaging: Cardboard box with Fox Knives logos
    Notes: Design by Les George

    FX-560ALOR
    €151.64
    Only 2 left
    Only 2 left
  8. Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife

    Intended Use: Sporting / Collection

    Production type: Industrial
    Country of Production: USA
    Blade: Stainless steel CPM-S90V Powder Steel
    Blade finish: Satin finish
    Handle: Fluted Carbon Fiber
    Blade Length: 75mm.
    Blade thickness: 3.2mm.
    Length closed: 102mm.
    Total length: 177mm.
    Weight: 79g.
    Closure: Back Lock
    Clip: stainless steel, removable and multi-position
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C41CFFP5
    €327.05
    Only 1 left
    Only 1 left
  9. Boker Plus - Kwaiken American Tanto by Lucas Burnley - D2 & Black G10 - 01BO512 - knife

    In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.

    The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.

    Intended Use: Tactical/Sportsman

    Production Type: Industrial
    Country of manufacture: China
    Blade: D2 steel
    Blade treatment: black coating
    Handle: stainless steel and G10
    Blade length: 90mm.
    Blade thickness: 3.1mm.
    Total length: 212mm.
    Weight: 120g.
    Clip: removable, stainless steel
    Closure: liner lock
    Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
    Notes: design by Lucas Burnley - flipper opening system on ball bearings

    BO-01BO512
    €77.05
    Only 1 left
    Only 1 left
    Out of stock
  10. Boker Plus - Swoopy Framelock Folder - Nitro-V & Sand G10 - 01BO693 - knife

    The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

    The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

    Intended Use: EDC / Sporting

    Production type: Industrial
    Country of manufacture: China
    Blade: Nitro-V stainless steel
    Blade finish: stonewash
    Handle: G10 and stonewash stainless steel
    Blade length: 79mm.
    Blade thickness: 3.1mm.
    Total length: 180mm.
    Weight: 93g.
    Clip: removable, stainless steel
    Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
    Notes: design by Michael Burch

    BO-01BO693
    €77.87
    Only 1 left
    Only 1 left
  11. ExtremaRatio - BF2TTS Wardog knife - PRIVATE COLLECTION - Tanto Point - knife

    RETIRED FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Condition: Excellent condition
    Available in stores: No
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: NO
    Packaging: YES
    Sheath: -
    Manuals, Certificates, and Warranties: YES
    Inspected and Certified by our internal laboratory
    Intended use: Tactical/Military

    Type of production: Industrial
    Blade: N690Co 58HRC stainless steel
    Blade Production: Italy
    Handle: Anticorodal
    Blade length: 67mm.
    Blade thickness: 3mm.
    Closed length: 124mm.
    Total length: 192mm.
    Balance: -
    Weight: 130g.
    Closure: Liner Lock
    Clip: Reversible and removable stainless steel
    Sheath: -
    Notes: Safety lock when knife is open

    AP-BF2TTSWD
    €176.23
    Only 1 left
    Only 1 left
  12. Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife

    As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

    The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

    The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

    With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

    Intended use: EDC/Sport/Collection

    Production type: Industrial
    Blade production: USA
    Blade: CPM Magnacut steel
    Blade treatment: Stone Wash
    Handle: Carbon Fiber and Titanium
    Blade length: 82mm
    Blade thickness: 3mm
    Closed length: 111mm
    Overall length: 187mm
    Weight: 68g
    Locking mechanism: Frame Lock
    Clip: Removable, multiposition, stainless steel
    Packaging: Cardboard box with Zero Tolerance logos
    Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

    ZT0450BLUCF
    €270.49
    Only 3 left
    Only 3 left
    Rating:
    100%
    5
  13. Boker Plus - Makri by Kornel Kiss - 02BO089 - knife

    The Zeitgeist is the sum total of those visions that are born in the present, shape an entire era, and are long gone by the creative minds that generated them. As a specialist in tactical and outdoor knives, Hungarian free spirit and knife maker Kornel Kiss regularly dares to look beyond the tip of his nose and, in the Boker Plus Makri, combines the elements of a practical EDC knife with the advantages of a Kukri blade, whose historical origins go back to Nepal.


    Intended Use: Utility

    Production Type: Industrial
    Country of manufacture: China
    Blade: ful tang in D2 steel
    Blade finish: Blacwashed
    Handle: G10
    Blade length: 71mm.
    Blade thickness: 3mm.
    Total length: 159mm.
    Weight: 94g.
    Sheath: made of Kydex, with Tek-Lok type attachment
    Packaging: cardboard box with Boker Plus logos
    Notes: Design by Kornel Kiss

    BO-02BO089
    €61.48
    Only 2 left
    Only 2 left
  14. Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Condition: in like new condition
    * Sharpening: Factory
    * Marks on blade: None
    * Marks on handle: None
    * Scabbard: Present - Original
    * Manuals, Certificates and Warranties: lacking certificate and packaging.
    * Checked and Certified by our in-house laboratory

    Intended Use: Collection

    Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
    Country of production: Italy
    Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
    Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
    Blade length: 57mm.
    Blade thickness: 3mm.
    Total length: 136mm.
    Weight: 57g.
    Sheath: lizard skin knife pouch
    Locking system: Liner Lock
    Notes: knife withdrawn from private collection

    AP-LF-CP
    €811.48
    Only 1 left
    Only 1 left
  15. Opinel - N°08 - Perrine Honore - Limited Edition Nature 2023 - Knife

    After the France, Amour and Escapade editions, discover the Nature edition!

    An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

    Perrine Honoré, a French illustrator and muralist, has decided to explore a synthetic, colorful, and naive language somewhere between the abstract and the figurative. Different natural elements appear on the handle of the knife so that everyone can interpret them in their own way. 

    The knife has an 8.5-cm stainless steel blade, and the handle is decorated with the sublimation technique.


    Intended Use: Collection

    Type of production: Industrial
    Country of manufacture: France
    Blade: 12C27 stainless steel
    Blade finish: satin-finished
    Handle: wooden, with 3D sublimation decoration
    Blade length: 80mm.
    Blade thickness: 1.5mm.
    Length closed: 107mm.
    Total length: 190mm.
    Weight: 42g.
    Closure: Viro-Block
    Packaging: Cardboard box with Opinel logos

    op-8-002602
    €36.07
    Only 7 left
    Only 7 left
  16. Opinel - N°08 - Rommy Gonzalez - Limited Edition Nature 2023 - Knife

    After the France, Amour and Escapade editions, discover the Nature edition!

    An edition highlighting the work of three artists committed to the organic, vegetable, or animal dimension.

    Discover pocket knife N°08 by Rommy González, a Chilean artist who decided to highlight mycelium and the fungi it produces. Her drawings were transcribed on the knife's fascinating handle using the sublimation method. The 8.5-cm blade is made of stainless steel.

     


    Intended Use: Collection

    Type of production: Industrial
    Country of manufacture: France
    Blade: 12C27 stainless steel
    Blade finish: satin-finished
    Handle: wooden, with 3D sublimation decoration
    Blade length: 80mm.
    Blade thickness: 1.5mm.
    Length closed: 107mm.
    Total length: 190mm.
    Weight: 42g.
    Closure: Viro-Block
    Packaging: Cardboard box with Opinel logos

    op-8-002601
    €36.07
    Only 8 left
    Only 8 left
  17. Maserin - Tungsteno by Atti - Tungsten Carbide & Green Fat Carbon - 373/WTG - knife

    Winner of the "Most Innovative Imported Design" at the Blade Show in 2023, this knife is designed by Attilio Morotti made in collaboration with Sandrin knives that supplies the tungsten carbide blades that, made through a sophisticated machining process, reach the extraordinary hardness of 71 HRC, yet at the same time maintaining a high twisting capacity and resilience.

    Intended Use: Sporting / Collection

    Country of manufacture: Italy
    Total length: 150mm
    Blade length: 80mm
    Blade thickness: 1.5 mm
    Blade material: polyhedral tungsten carbide 71 HRC hardness
    Handle material: forged Fat Carbon fiber
    Weight: 78 grams
    Pocket clip: -
    Hardware: stainless steel
    Lock type: W-Lock (modified backlock, with longitudinal drive on the back of the knife)
    Notes: Design by Attilio "Atti" Morotti - Blades by Sandrin Knives - Winner at the Blade Show 2023 of "Most Innovative Imported Design"

    MA-373/WTG
    €244.26
    Only 1 left
    Only 1 left
  18. Benchmade - Freek - Satin S90V & Carbon Fiber - 560-03 - knife

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: USA
    Blade: Stainless steel CPM-S90V (59-61 HRC)
    Blade treatment: Satin finish
    Handle: Carbon fiber with anodized aluminum spacers
    Blade length: 91mm.
    Blade thickness: 3mm.
    Length closed: 123mm.
    Total length: 215mm.
    Weight: 116g.
    Closure: Axis
    Clip: stainless steel with PVD treatment, removable
    Packaging: cardboard box with Benchmade logos

    BM-560-03
    €286.89
    Only 3 left
    Only 3 left
  19. Benchmade - Bailout Knife Crater Blue Aluminum - CPM-M4 - Plain Tanto - 537FE-02 - knife

    When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cerakote®
    Handle: Crater Blue anodized 6061-T6 aluminum
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 10.4mm
    Weight: 70g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: -

    BM-537FE-02
    €245.90
    Only 2 left
    Only 2 left
  20. Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Serrated Tanto - 537SGY-03 - knife

    When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cerakote®
    Handle: Black anodized 6061-T6 aluminum
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 10.4mm
    Weight: 70g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: -

    BM-537SGY-03
    €245.90
    Only 1 left
    Only 1 left
  21. Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Plain Tanto - 537GY-03 - knife

    When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: USA
    Blade: CPM-M4 steel (62-64 HRC)
    Blade Finish: Cerakote®
    Handle: Black anodized 6061-T6 aluminum
    Blade Length: 86mm.
    Blade Thickness: 2.3mm.
    Closed Length: 119mm.
    Overall Length: 205mm.
    Closed Thickness: 10.4mm
    Weight: 70g.
    Locking Mechanism: AxisLock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: -

    BM-537GY-03
    €245.90
    Only 2 left
    Only 2 left
  22. CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife

    Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.

    Intended Use: Tactical / EDC

    Production Type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel AUS-10A
    Blade Treatment: Black Oxide
    Handle: G10
    Blade Length: 76mm.
    Blade thickness: 2.8mm.
    Length closed: 101mm.
    Total length: 178mm.
    Weight: 102g.
    Closure: Liner Lock
    Clip: stainless steel, removable
    Packaging: cardboard box with CRKT logos
    Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movement

    C7910
    €80.33
    Only 1 left
    Only 1 left
  23. CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife

    Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.

    Intended Use: Tactical

    Production Type: Industrial
    Country of Production: China
    Blade: Sandvik 12C27 stainless steel
    Blade treatment: Black Oxide
    Handle: G10
    Blade Length: 85.9mm.
    Blade thickness: 3.1mm.
    Length closed: 116mm.
    Total length: 203mm.
    Weight: 110g.
    Closure: Liner Lock
    Clip: stainless steel, removable
    Packaging: cardboard box with CRKT logos
    Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movement

    C2606
    €76.23
    Only 1 left
    Only 1 left
  24. MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife

    Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

    The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Italy
    Blade: M390 58/60HRC stainless steel
    Blade finish: Satin finish
    Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 87m.
    Total length: 145mm.
    Thickness when closed: 13mm
    Weight: 70g.
    Security system: Liner Lock
    Opening system: on ball bearings
    Clip: stainless steel, flush, removable and reversible
    Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
    Notes: Design by Jesper Voxnaes

    MK-FX03M-3CM
    Special Price €159.84 Regular Price €187.70
    Only 3 left
    Only 3 left
  25. MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife

    Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

    The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Italy
    Blade: M390 58/60HRC stainless steel
    Blade finish: Satin finish
    Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 87m.
    Total length: 145mm.
    Thickness when closed: 13mm
    Weight: 70g.
    Security system: Liner Lock
    Opening system: on ball bearings
    Clip: stainless steel, flush, removable and reversible
    Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
    Notes: Design by Jesper Voxnaes

    MK-FX03M-1CM
    €187.70
    Only 1 left
    Only 1 left
  26. MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife

    Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

    The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

    Intended Use: Sporting

    Type of production: Industrial
    Country of manufacture: Italy
    Blade: M390 58/60HRC stainless steel
    Blade finish: Satin finish
    Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
    Blade length: 49mm.
    Blade thickness: 3mm.
    Length closed: 87m.
    Total length: 145mm.
    Thickness when closed: 13mm
    Weight: 70g.
    Security system: Liner Lock
    Opening system: on ball bearings
    Clip: stainless steel, flush, removable and reversible
    Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
    Notes: Design by Jesper Voxnaes

    MK-FX03M-2CM
    Special Price €159.84 Regular Price €187.70
    Only 3 left
    Only 3 left
  27. Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife

    A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

    A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

    Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


    Intended use: sub/sporting

    Type of production: industrial
    Country of manufacture: Japan
    Blade: nitrogen steel H1
    Blade finish: satin-finished
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 175mm.
    Thickness when closed: 15mm.
    Weight: 54g.
    Closure: Back Lock
    Clip: removable, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    SC88SYL
    €130.33
    Only 1 left
    Only 1 left
  28. Medford Knife and Tool - Praetorian Slim - S45VN Tanto Tumbled Blade, Blue Handles - MK208 - knife

    With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

    Intended Use: Sporting / EDC

    Type of production: Mid-Tech
    Country of manufacture: USA
    Blade: CPM-S45VN steel
    Blade finish: Tumbled & Satin
    Handle: Anodized titanium with flamed hardware
    Blade length: 90mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thickness when closed: 11mm.
    Weight: 106g.
    Locking system: frame lock
    Clip: titanium, removable
    Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
    Notes: "Loyalty" discounts are not active on this item.

    MK208STT
    €663.93
    Only 1 left
    Only 1 left
  29. MKM - Eclipse by Vox - Satin MagnaCut & Dark Stonewash Titanium - EL-GYBK - Knife

    Eclipses indicate significant periods of change and transformation.
    While a solar eclipse opens the portal to new beginnings and changes,
    a lunar eclipse reveals energies that help us complete a journey or change course in some way...
    Either way, follow the light beyond the darkness!

    Intended Use: Sporty

    Production type: Industrial
    Country of manufacture: Italy
    Blade: MagnaCut steel HRC 61/63
    Blade treatment: Satin finish
    Handle: Titanium Gr.5 Ti6AI4V Dask Stonewash
    Blade length: 81mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 191mm.
    Weight: 90g.
    Closure: FrameLock
    Clip: titanium, deep pocket, removable
    Sheath: zippered nylon pouch
    Packaging: cardboard box with MKM logos
    Notes: Design by Jesper Voxnaes

    MK-EL-GYBK
    €228.69
    Only 1 left
    Only 1 left
  30. MKM - Eclipse by Vox - Dark Stonewash MagnaCut & Purple Titanium - EL-PRBKD - Knife

    Eclipses indicate significant periods of change and transformation.
    While a solar eclipse opens the portal to new beginnings and changes,
    a lunar eclipse reveals energies that help us complete a journey or change course in some way...
    Either way, follow the light beyond the darkness!

    Intended Use: Sporty

    Production type: Industrial
    Country of manufacture: Italy
    Blade: MagnaCut steel HRC 61/63
    Blade treatment: Dark Stonewashed
    Handle: Titanium Gr.5 Ti6AI4V Dark Stonewashed with anodizing
    Blade length: 81mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 191mm.
    Weight: 90g.
    Closure: FrameLock
    Clip: anodized titanium, deep pocket, removable
    Sheath: zippered nylon pouch
    Packaging: cardboard box with MKM logos
    Notes: Design by Jesper Voxnaes

    MK-EL-PRBKD
    €236.89
    Only 1 left
    Only 1 left
  31. Benchmade - Grizzly Creek Hunting Folder - S30V Wood - 15062 - knife

    Better than ever. The 15062 Grizzly Creek is the next phase of the quintessential field multitasker, featuring subtle refinements such as the CPM-S30V non-recurved drop point blade for easy sharpening and orange accents for increased visibility in the field. Retaining the unmistakable folding skinning hook, fantastic ergonomics and classic styling of its predecessor, the Grizzly Creek remains the complete package for the hunter who wants everything in a pocket folder.

    Intended Use: Hunting

    Production type: Industrial
    Country of manufacture: USA
    Blade: stainless steel CPM-S30V 58/60HRC
    Blade finish: satin-finished
    Handle: stabilized wood
    Blade length: 89mm.
    Blade thickness: 3.15mm.
    Length closed: 110mm.
    Total length: 198mm.
    Thickness when closed: 15.2mm.
    Weight: 118.5g.
    Closure: AXIS Lock
    Clip: Removable, stainless steel
    Sheath: -
    Packaging: Cardboard box with Benchmade logos
    Notes: retractable skinning hook

    BM-15062
    €225.41
    Only 1 left
    Only 1 left
  32. Benchmade - 945-2 Mini - S90V - Osborne knife Reverse Tanto - Carbon Fiber - knife

    Type of production: Industrial
    Country of production: USA
    Blade: in CPM-S90V steel 59/61HRC
    Blade finish: Satin
    Handle: Carbon Fiber
    Blade length: 74mm.
    Blade thickness: 2.7mm.
    Closed length: 97.5mm.
    Total length: 172mm.
    Thickness when closed: 10mm.
    Weight: 54g.
    Lock: AXIS Lock
    Clip: Removable and reversible, in stainless steel
    Packaging: Cardboard box with Benchmade logos
    Notes: Design by Warren Osborne

    BM-945-2
    €278.69
    Only 2 left
    Only 2 left
  33. Viper - 2023 Titanium and Mother of Pearl Limited Edition Collection - Hug, Key, Twin - VCOL/2022M - knives

    Precious Mother-of-Pearl Collection consisting of 3 knives: TWIN, KEY, HUG with titanium handle and mother-of-pearl insert. Rounded spring with handmade file work. Accompanied by individual leather liners.

    Limited and numbered series of 200 sets with cylindrical wooden and plexiglass display stand.

    HUG DATA SHEET
    Type of production: Industrial, with handmade lima spring
    Country of production: Italy
    Blade: Bohler M390 Microclean stainless steel, HRC 59/61
    Blade treatment: Satin finish
    Handle: Titanium GR5 and Mother of Pearl
    Blade length: 71mm.
    Blade thickness: 3mm.
    Length closed: 112mm.
    Total length: 184mm.
    Thickness when closed: 14mm.
    Weight: 75g.
    Closure: Slipjoint
    Clip: titanium
    Notes: Design by Sacha Thiel

    KEY DATA SHEET
    Type of production: Industrial, with handcrafted file spring
    Country of Production: Italy
    Blade: Bohler M390 Microclean stainless steel, HRC 59/61
    Blade treatment: Satin finish
    Handle: Titanium GR5 and Mother of Pearl
    Blade length: 76mm.
    Blade thickness: 3mm.
    Length closed: 115mm.
    Total length: 185mm.
    Thickness when closed:10.5mm.
    Weight: 75g.
    Closure: SlipJoint
    Clip: -
    Notes: Design by Jesper Voxnaes

    TWIN DATA SHEET
    Type of production: Industrial, with handmade file spring
    Country of Production: Italy
    Blade: Bohler M390 Microclean stainless steel, HRC 59/61
    Blade treatment: Satin finish
    Handle: Titanium GR5 and Mother of Pearl
    Blade length: 77mm.
    Blade thickness: 3mm.
    Length closed: 112mm.
    Total length: 176mm.
    Thickness when closed: 10mm.
    Weight: 77g.
    Closure: Slipjoint
    Clip: -
    Notes: Design by Fabrizio Silvestrelli

    VCOL/2022M
    €811.48
    Only 1 left
    Only 1 left
  34. Fox - TRIBAL K Fixed Karambit by Doug Marcaida - FX-803 - Knife

    Intended Use: Tactical / Military 

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel N690Co
    Blade finish: Black Idroglider
    Handle: G10
    Blade length: 78mm.
    Blade thickness: 3mm.
    Total length: 148mm.
    Weight: 97g.
    Sheath: kydex, with double Ulti-Clip attachment system
    Packaging: cardboard box with Fox logos
    Notes: Design by Doug Marcaida

    FX-803
    €105.74
    Only 1 left
    Only 1 left
  35. MKM - Miura - M390 Button Lock - Titanium Blue - MI-TBL - knife

    THE MAGIC BUTTON FOR HAPPINESS
    Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!

    Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.




    Intended Use: Sporting

    Type of production: Industrial
    Country of Production: Italy
    Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
    Blade finish: Satin finish
    Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
    Blade length: 69mm.
    Blade thickness: 3mm.
    Total length: 169mm.
    Weight: 72g.
    Closure: Button Lock
    Clip: titanium, removable and reversible, machined from billet
    Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
    Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year

    We advise our customers that discountische Loyalty are not active for this product

    MK-MI-TBL
    €294.26
    Only 5 left
    Only 5 left
  36. Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife

    Intended Use: Sporting

    Type of production: industrial
    Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
    Blade treatment: satin finish
    Country of manufacture: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 96mm.
    Blade thickness: 3mm.
    Length closed: 127mm.
    Total length: 222mm.
    Weight: 105g.
    Closure: Back Lock
    Clip: removable, multi-position, stainless steel
    Packaging: cardboard case with Spyderco logos
    Notes: variant in FRN Blue made from Bohler K390 carbon steel

    C10FSK390
    €180.33
    Only 1 left
    Only 1 left
  37. ExtremaRatio - Ferrum T knife - Black Warfare - knife

    Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

    Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

    Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

    The reversible clip is positioned on the back.

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co 58HRC stainless steel
    Blade Finish: Black
    Handle: Rough Anticorodal
    Blade length: 73mm.
    Blade thickness: 3mm.
    Closed length: 90mm.
    Total length: 184mm.
    Weight: 86g.
    Closure: Liner Lock
    Clip: Removable and reversible, in stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Note: -

    ER-FE-T-BW
    €190.98
    Only 1 left
    Only 1 left
  38. ExtremaRatio - Ferrum T Black knife - Tactical Mud - knife

    Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

    Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

    Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

    The reversible clip is positioned on the back.

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co 58HRC stainless steel
    Blade Finish: Black
    Handle: Rough Anticorodal
    Blade length: 73mm.
    Blade thickness: 3mm.
    Closed length: 90mm.
    Total length: 184mm.
    Weight: 86g.
    Closure: Liner Lock
    Clip: Removable and reversible, in stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Note: -

    ER-FE-T-TM
    €195.90
    Only 1 left
    Only 1 left
  39. ExtremaRatio - Ferrum Rescue multi tool - Black - knife

    Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:

    The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.

    The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.

    The line cutter blade and the scalpel are both interchangeable.

    Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.

    Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

    The reversible clip is positioned on the back.

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co 58HRC stainless steel
    Blade finish: Satin
    Handle: Rough Anticorodal
    Blade length: 56mm.
    Blade thickness: 3mm.
    Closed length: 90mm.
    Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
    Weight: 85g.
    Closure: Liner Lock
    Clip: Removable and reversible, in stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Note: -

    ER-FE-RB
    €237.70
    Only 2 left
    Only 2 left
  40. ExtremaRatio - Ferrum Rescue multi tool - Red - knife

    Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:

    The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.

    The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.

    The line cutter blade and the scalpel are both interchangeable.

    Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.

    Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

    The reversible clip is positioned on the back.

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co 58HRC stainless steel
    Blade finish: Satin
    Handle: Rough Anticorodal
    Blade length: 56mm.
    Blade thickness: 3mm.
    Closed length: 90mm.
    Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
    Weight: 85g.
    Closure: Liner Lock
    Clip: Removable and reversible, in stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Note: -

    ER-FE-RR
    €237.70
    Only 1 left
    Only 1 left
  41. ExtremaRatio - Ferrum E knife - Tactical Black - knife

    Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

    Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

    The reversible clip is positioned at the rear.

    Intended use: Tactical / EDC

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel N690Co 58HRC
    Blade finish: Satin
    Handle: Rough Anticorodal
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 90mm.
    Total length: 186mm.
    Weight: 87g.
    Closure: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Notes: -

    ER-FE-E-TB
    €177.87
    Only 1 left
    Only 1 left
  42. ExtremaRatio - Ferrum E knife - Tactical Mud - knife

    Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

    Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

    The reversible clip is positioned at the rear.

    Intended use: Tactical / EDC

    Production type: Industrial
    Country of Production: Italy
    Blade: Stainless steel N690Co 58HRC
    Blade finish: Satin
    Handle: Rough Anticorodal
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 90mm.
    Total length: 186mm.
    Weight: 87g.
    Closure: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Notes: -

    ER-FE-E-TM
    €182.79
    Only 1 left
    Only 1 left
  43. ExtremaRatio - BF1CD - Black Rough - knife

    Intended Use: Tactical / EDC

    Production type: Industrial
    Country of Production: Italy
    Blade: stainless steel N690Co 58HRC
    Blade Finish: Burnishing MIL-C-13924
    Handle: Rough Anticorodal
    Blade Length: 70mm.
    Blade thickness: 3mm.
    Length closed: 99mm.
    Total length: 168mm.
    Weight: 85g.
    Closure: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Extrema Ratio logos
    Notes: -

    ER-BF1CDBR
    €144.26
    Only 1 left
    Only 1 left
  44. Benchmade - Bugout Axis - Cerakote & Alpine Glow - 535BK-06 - knife

    The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.

    Intended Use: Sporting / EDC

    Type of production: Industrial
    Country of manufacture: USA
    Blade: CPM-S30V 58/60HRC
    Blade finish: Cerakote
    Handle: CF-Elite (Grivory)
    Blade length: 82mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 189mm.
    Thickness when closed: 10.5mm
    Weight: 52g.
    Closure: Axis Lock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos

    BM-535BK-06
    €163.11
    Only 3 left
    Only 3 left
    Rating:
    80%
    4
  45. Benchmade - Bugout Axis - Cerakote & Storm Gray - 535BK-08 - knife

    The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.

    Intended Use: Sporting / EDC

    Type of production: Industrial
    Country of manufacture: USA
    Blade: CPM-S30V 58/60HRC
    Blade finish: Cerakote
    Handle: CF-Elite (Grivory)
    Blade length: 82mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 189mm.
    Thickness when closed: 10.5mm
    Weight: 52g.
    Closure: Axis Lock
    Clip: Removable and reversible, stainless steel
    Packaging: Cardboard box with Benchmade logos

    BM-535BK-08
    €163.11
    Only 1 left
    Only 1 left
  46. Maserin - Energy - Titanium Flipper Knife by Sergio Consoli - 406 - knife

    Intended use: Collection / Sporting

    Type of production: Industrial
    Country of production: Italy
    Blade: in D2 steel 58/61HRC
    Blade finish: satin
    Handle: in titanium, with spacers and anodized titanium screws
    Blade length: 105mm.
    Blade thickness: 3.5mm.
    Closed length: 130mm.
    Total length: 230mm.
    Thickness when closed: 9mm.
    Weight: 110g.
    Lock: Frame Lock with removable stainless steel flipper
    Clip: in anodized titanium, carved from solid
    Notes: Opening via Carson flipper system - Opening movement on ball bearings - Design by Sergio Consoli

    MA-406
    €241.80
    Only 1 left
    Only 1 left
  47. Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife

    The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)

    Intended use: Tactical / Military

    Type of production: Industrial
    Country of production: Italy
    Blade: N690Co stainless steel
    Blade finish: Black Idroglider
    Handle: G10
    Blade length: 60mm.
    Blade thickness: 3mm.
    Total length: 182mm.
    Weight: 113g.
    Clip: reversible and removable, in painted stainless steel
    Packaging: Cardboard box with Fox logos
    Notes: Design by Giuliano Ron

    FX-826
    €110.66
    Only 1 left
    Only 1 left
    Rating:
    91%
    4.6
  48. Fox - TRIBAL K - Karambit Knife by Doug Marcaida - FX-802

    Intended use: Tactical / Collection

    Production type: Industrial
    Country of production: Italy
    Blade: N690Co stainless steel
    Blade finish: Black Idroglider
    Handle: G10
    Blade length: 50mm of cutting edge and 70mm of blade
    Blade thickness: 3mm
    Overall length: 150mm
    Weight: 105g
    Clip: Steel
    Packaging: Cardboard box with Fox logos
    Notes: Design by Doug Marcaida

    FX-802
    €131.15
    Only 1 left
    Only 1 left
Set Ascending Direction

Items 1-48 of 908

Page




ecommerce sicuro