rescue knives

On December 19, 1941, in Eluet El Asel, about 400 men from the 1st Royal Carabinieri Battalion Paratrooper faced the assault of 4 battalions of Indian troops of the British Army. Jumping from their trenches by launching improvised devices, the "Desert Lions", as Radio London called them, made the defensive line impenetrable by allowing thousands of Italian-German troops to withdraw safely. This was the first page in the long history of Italian paratroopers.

The Tuscania Paratrooper Regiment asked that the Extra Ratio T911 be specifically made as a commemorative knife for its 80th anniversary.

The T911 is a medium-sized folding light and designed for professional use by military operators. It is equipped with a modified spear point blade, flat edge, in Bohler N690 cobalt steel heat-treated to a hardness of 58 HRC, for the best compromise between strength, ease of regrinding and thread hold. The blade is 76 mm long, 4 mm thick, has a stone washed finish and rotates around an adjustable pin which allows to obtain the best fluidity in opening. A brace allows you to lock the pin in the best position.

The handle is in Anticorodal aluminum alloy with high strength black anodized finish and is milled to facilitate the transition from "reverse grip" handle to saber handle.

The blade is opened by means of a pin operated with the thumb. The knife uses a liner lock type blade lock and a safe ensures maximum hold even during heavy use. The safety lever is colored red for better visibility and engages in an advanced position for more instinctive use.

In the handle are integrated a seat belt cutter with easily available and replaceable cutter-type blade, a tungsten glass breaker, a stainless steel knot loosener and a screwdriver for adjusting the pointing optics, in AISI 420 steel. The clip , reversible and fixed at the end of the handle, allows a very deep port in the pocket, for less visibility.

The knife can be dismantled for cleaning and maintenance. With a total length of 194 mm and a weight of 145g, the T911 is easy to wear both in uniform and in civilian clothes.

Intended use: Tactical / Emergency

Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Anticorodal
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 194mm.
Thick when closed: 24mm.
Weight: 145g.
Closing: Liner Lock
Clip: Stainless steel
Packaging: black cardboard box with Extrema Ratio logos
Notes: belt cutter, glass breaker, screwdriver for optics, stainless steel knot loosers

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:

Knife withdrawn from private collection. Very rare model made by Extrema Ratio with Borut Kincl ( Slovenian martial arts master and trainer of police and military special forces) no longer in production since 2009 - Overall in very good condition. Complete with cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.

Intended use: tactical/military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Blade Production: Italy
Handle: PVD
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 235mm.
Balance: -
Weight: 195g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety catch when knife is open

Translated with www.DeepL.com/Translator (free version)

Intended Use: Multirole / Tactical

Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1095 carbon steel
Blade treatment: Phosphated
Handle: Thermoplastic, with steel tang and guard
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 282mm. 
Balance: backward
Weight: 294g.
Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
Package: Cardboard box with OKC logos
Notes: Knife produced and used for many decades by the U.S. naval forces.

THE CAC® GIGN - Limited Edition 250 ex.

The Intervention Groupe de la Gendarmerie Nationale (GIGN) is an elite unit of the French National Gendarmerie specializing in counter-terrorism actions, in the freeing of hostages and in special operations.

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

LE CAC® scelto ufficialmente dell'Esercito Francese

Questo coltello è un vero concentrato di tutte le tecnologie avanzate che ci si aspetterebbe da un coltello operativo. La lama è in Nitrox®,  con manicatura in PA6

La versione del C.A.C attualmente in dotazione all'esercito, con logo ufficiale sulla lama e impugnatura in coyote non è disponibile per la vendita al civile.

Il CAC ® è il terzo coltello prdotto dalla Tarrerias - Bonjean progettato per l'esercito francese. Il suo design senza compromessi, leggerezza e robustezza fanno del CAC® un coltello eccezionale. Molto più tecnico e ambizioso dei suoi predecessori, il CAC® è la risposta di TB alla richiesta espressa dall'esercito francese, ovvero quella di progettare un coltello robusto e ambidestro con apertura e chiusura con una sola mano. Per creare questo eccezionale coltello, Tarrerias - Bonjean ha collaborato con Philippe Perotti, ex appartenente alle forze speciali francesi e autore di decine di libri sul tiro. La sua comprovata esperienza nel combattimento corpo a corpo ha massimizzato l'efficienza dell'uso del coltello per rendere il CAC® il compagno ideale per le truppe francesi in tutti i teatri operativi. Il meccanismo di bloccaggio del CAC® è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.

TB ha anche integrato il meccanismo di bloccaggio sicuro della lama spostando l'asse sul CAC®. Questo meccanismo è estremamente robusto e garantisce un perfetto bloccaggio della lama in posizione aperta.

Il CAC® è stato ufficialmente selezionato nel 2017 dall'esercito francese, rispetto all'offerta dei competitor, per le sue prestazioni, e rapporto qualità prezzo. La sua distribuzione nei vari corpi d'armata è iniziata all'inizio del 2018 e equipaggerà in gran parte i nostri francesi almeno fino al 2022.

Perfettamente resistente alla corrosione, la lama è realizzata in Nitrox®. Il CAC® ha anche un rompivetro, un taglia cinture e una clip da cintura reversibile.

Il manico è composto da due piastre in polimero caricato con fibre di vetro. Queste piastre sono avvitate al meccanismo tramite viti in acciaio inossidabile, una delle quali ospita abilmente una lama taglia reggetta. Questa lama curva e intercambiabile è progettata per tagliare cinghie, corde e cinture di sicurezza per facilitare l'estrazione in caso di incidente.

Destinazione d'uso: collezione

Lama: in acciaio inox Nitrox® 58/59 hrc
Manicatura: in G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza totale: 238mm.
Peso: 161g.
Fodero: -
Note: design Philippe Perotti 

LE CAC® officially chosen by the French Army

This knife is a true concentrate of all the advanced technologies that one would expect from an operational knife. The blade is in Nitrox®, with a PA6 handle

The version of the C.A.C currently supplied to the army, with the official logo on the blade and coyote handle is not available for sale to the civilian.

The CAC ® is the third knife produced by Tarrerias - Bonjean designed for the French army. Its uncompromising design, lightness and strength make the CAC® an exceptional knife. Much more technical and ambitious than its predecessors, the CAC® is TB's response to the request expressed by the French army, namely to design a sturdy and ambidextrous knife with one-handed opening and closing. To create this exceptional knife, Tarrerias - Bonjean collaborated with Philippe Perotti, a former member of the French special forces and author of dozens of books on shooting. Its proven track record in hand-to-hand combat has maximized the efficiency of knife use to make the CAC® the ideal companion for French troops in all operational theaters. The locking mechanism of the CAC® is extremely robust and guarantees perfect locking of the blade in the open position.

TB has also integrated the safe blade locking mechanism by moving the axis on the CAC®. This mechanism is extremely robust and guarantees perfect locking of the blade in the open position.

The CAC® was officially selected in 2017 by the French army, compared to the competitors' offer, for its performance and value for money. Its distribution in the various corps began at the beginning of 2018 and will largely equip our French at least until 2022.

Perfectly resistant to corrosion, the blade is made of Nitrox®. The CAC® also has a glass breaker, a belt cutter and a reversible belt clip.

The handle is composed of two polymer plates loaded with glass fibers. These plates are screwed to the mechanism by means of stainless steel screws, one of which cleverly houses a strap cutter blade. This interchangeable, curved blade is designed to cut through straps, ropes and seat belts for easy extraction in the event of an accident.

Intended use: collection

Blade: stainless steel Nitrox® 58/59 hrc
Handle: in PA6 FV
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 238mm.
Weight: 195g.
Sheath: -
Notes: Philippe Perotti design

The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 245mm.
Balancing: 3cm back
Weight: 225g.
Sheath: nylon, modular, compatible with M.O.L.L.E.
Packaging: Cardboard box with OKC logos
Note:

Use: Tactics / collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: gun cote heart
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT Limited Exclusive Project - Single Edge - Wander Tactical Certified

Use: Tactics / collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: dual tone
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT exclusive project limited to 5 pieces - single edge - Wander Tactical certified

Intended use: Sports / Hiking

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade finish: Black Idroglider
Handle: G10 with 9 rubber O-rings
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 149g.
Sheath: in kydex, Taco type, with multi-position Tek-Lok attachment
Packaging: Cardboard box with Fox logos
Notes: Design by Tommaso Rumici - Equipped with bit holder for screwdrivers, flat tip screwdriver, philips screwdriver - Rear carabiner

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Brunishing Mil-C-13924
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Emergency and survival multi-purpose knife

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: anticorodal anodized aluminum
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length 8 cm) - window breaker - 2013 model now out of production

Intended use: tactical / emergency belt cutter

Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel AUS4
Blade treatment: -
Handle: Glass Reinforced Nylon
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: -
Total length: 146mm.
Weight: 96g.
Closing: -
Sheath: Glass-Reinforced Nylon
Packaging: Cardboard box with CRKT logos
Note: -

ASEK KNIFE

Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency tool

ASEK RESCUE TOOL

Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpener

Intended use: Rescue / Emergency

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Black Idroglider
Grip: steel folders with G10 grips
Blade length: 57mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 184mm.
Thickness when closed: -
Balancing: -
Weight: 130g.
Closure: Back Lock with additional safety
Clip: Removable and reversible, in stainless steel
Sheath: -
Packaging: cardboard box with Fox FKMD logos
Notes: Made by Doug Marcaida and Lad Mandiola - Wave opening by Emerson - Skull Crasher on the front of the handle - snap hook for quick coupling in the rear ring - phillips screwdriver on the upper guard branch - flat screwdriver on the tip of the blade - belts emergency - 3 3/8 ", 1/2" and 1/4 "hexagon wrenches in the center of the blade

Extrema Ratio - Panther Designed Borut Kincl - knife
Knife collaboration between Extrema Ratio and Borut Kincl trainer official special forces Slovenes "ESD"
Intended use: Tactical / Military
Type of production: industry
Blade: stainless steel N690Co 58HRC
Production Lama: Italy
Handle: Anticorodal
Blade length: 95mm.
Blade Thickness: 3mm.
Length closed: 140mm.
Overall length: 235mm.
Balancing: -
Weight: 210g.
Lock: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety locks to open knife

Innovative tactical / military knife, designed by Duane Dieter, produced at the end of the 90s and immediately became an icon in the field of cutlery.

Master of Defense, an eclectic American brand no longer in business and subsequently acquired by Blackhawk! Blades produced various tactical and military types of folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Single copy 867/2000 at our disposal, new and with original boxes, nowhere to be found and discontinued for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Lama production: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: Aeronautical aluminum with non-slip inserts - belt-cutting and skull-crasher
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 247mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with M.O.D. Master of Defense and warranty certificates

Extrema Ratio is pleased to introduce the new Police III.

This folding is equipped with:
* Standard blade, made with special squared shape
* Lama emergency (belt cutter) with a flip-
* Sciogli node with particular safety lock
* Evacuation hammer
* Clip for pocket port
* Synthetic sheath

TECHNICAL DATA

* Overall Length: 220mm.
* Blade length: 86mm.
* Weight: 258g.
* Blade Thickness: 3mm.
* Steel Blade: 58HRC N690Co

The CRKT M16-14ZLEK Big Dog Law Enforcement knife is a Kit Carson design that is built for professional use. The black Zytel InterFrame handle has 420J2 stainless steel liners and CRKT's AutoLAWKS knife safety, which automatically actuates when the blade is open making it a virtual fixed blade. First responders will appreciate the integrated tungsten carbide window breaker and seat belt cutter. The pocket clip is 4-way reversible for every possible carry type, but not designed for tip-up in-pocket carry.

The Carson M16-14ZLEK features a black finished Tanto blade with a partially serrated cutting edge. The blade is easily opened with the dual thumb studs or a push of the Carson Flipper, which has an integrated seat belt cutter.

Specifications:
Overall Length: 9.25"
Blade Length: 3.75"
Blade Thickness: .14"
Blade Steel: AUS 8, HRC 55-57
Grind: Hollow
Handle Material: Zytel
Closed Length: 5.5"
Weight: 6.2 oz. 
Made in Taiwan

Destination: utility and emergency knife
Blade: stainless steel N690Co, hardened to 58 HRC
Handle: anodized aircraft aluminum anticorodal
Total Length: 260 mm.
Blade Length: 118 mm.
Blade Thickness: 4 mm.
Locking Type: liner lock
Clip: made of stainless steel, removable
Weight: 266 g.
Notes: led light - emergency blade (length 8 cm) - glass-breaking

Destination: Coltello multiuso di emergenza e sopravvivenza
Blades: Acciaio inox N690Co a 58 HRC
Handle: Alluminio aeronautico anodizzato anticorodal
Total Length: 260 mm.
Blade Length: 118 mm.
Blade Tickness: 4 mm.
Locking Type: liner lock
Clip: amovibile in acciaio
Weight: 330 g.
Notes: luce led - lama emergenza (lungh. 8 cm)  - sega per legno (lungh. 11,5 cm) con terminale a gancio affilato - frangivetro - punte cacciavite

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Blade finish: Burnishing 
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 158mm
Total length: 268mm.
Thickness when closed: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety.
Clip: Removable and multi-position, stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied to the French G.I.G.N. (National Gendarmerie Intervention Group), which specializes in counter-terrorism and hostage-response operations

Blade: AUS-8 stainless steel high-carbon Teflon 57/58HRC
Handle: Handle: Zytel
Blade length: 84 mm.
Blade Thickness: 2.5 mm.
Total length: 200 mm.
Weight: 110 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: Equipped with safety lock and guard LAWKS "Carson Flipper" - glass breaking

Ingredior: "io entro".
Lo specialista, la versione più spinta della serie MF, ha una punta studiata per ottenere la massima penetrazione mentre la doppia guardia aumenta la sicurezza nei colpi di punta.

Destinazione d'uso: Tattico

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: Testudo
Manicatura: Anticorodal con frangivetro in acciaio inox
Lunghezza lama: 112mm.
Spessore lama: 4mm.
Lunghezza chiuso: 150mm.
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 200g.
Chiusura: Liner Lock con sicura addizionale
Clip: Acciaio inox
Fodero: Nylon Nero, compatibile MOLLE, con chiusura in Velcro
Confezione: Scatola di cartone con loghi Extrema Ratio
Note:

Intended use: Tactical / Military

Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co
Lama treatment: DLC
Handle: G-10 with stainless steel liners
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: 150mm.
Total length: 260mm.
Thick when closed: 20mm.
Balancing: -
Weight: 228g.
Closure: Liner Lock with safety lock
Clip: Removable in stainless steel
Sheath: Nylon Camouflage
Packaging: gray cardboard case with Fox logos
Notes: Knife currently supplied to the "Folgore Parachute Transmission Company" - Equipped with rear Skull Crasher and replaceable emergency harness

Maserin - Sturm - 668 - Knife

Intended Use: Utility / CQD / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Teflon coated
Handle: -
Blade length: 93mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Total length: 225mm.
Thick when closed: 17mm.
Balance: -
Weight: 225g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon and rubber, made in Italy, by radar
Packaging: Cardboard box with logos Maserin
Notes: Kit utility to engage in the tang of the knife with wood saw, screwdriver, bottle opener and can opener

Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.

Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cm

Destinazione d'uso: Tattico/Emergenza

Tipo di produzione: Industriale
Paese di produzione: Germania
Lama: In acciaio 440A 59/60HRC
Finitura lama: Teflonatura
Manicatura: Plakarta
Lunghezza lama: 100mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 140mm.
Lunghezza totale: 240mm.
Spessore da chiuso: 27mm.
Peso: 150g.
Chiusura: Blade Lock
Clip: Plakarta
Fodero: -
Confezione: scatola in cartone
Note: inoltre ha integrato un tagliacavi, uno sfondavetro ed una lama per tagliare fascette e manette plastiche