bing

Rockstead

Shop By
Shopping Options
Brand
  1. Approved 1item
  2. Rockstead 11items
Less
Stock
  1. Out of Stock 12items
Rating
  1. 5
    1item
  2. 4
    & up
    2items
Set Ascending Direction

12 Items

  1. Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife

    With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

    Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

    Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
    Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Overall length: 210 mm.
    Weight: 145 g.
    Lock: Liner Lock steel in 52HRC 402J2
    Clip: Steel 402J2 to 52HRC
    Notes: Accompanied by a certificate of guarantee with the technical specifications.

    RO-SHIN-ZDP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  2. Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: In very good condition
    * Commercially available Discontinued
    * Sharpening: Factory
    * Marks on blade: -
    * Marks on handle: - -
    * Box: marketed in silk pouch.
    * Scabbard: Leather, belt, original, with a few small marks given by time.
    * Manuals, Certificates and Warranties: present.
    * Checked and Certified by our in-house laboratory



    The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

    Country of manufacture: Japan
    Type of manufacture: midtech
    Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
    Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
    Blade length: 90mm.
    Blade thickness: 3.5mm.
    Total length: 216mm.
    Weight: 139g.
    Closure: Liner Lock
    Clip: stainless steel
    Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

    RO-HIMHDLC-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  3. Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan

    Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

    Intended Use: Collection/Sportsman

    Type of production: Midtech
    Country of manufacture: Sakai - Japan
    Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
    Blade treatment: mirror polish
    Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
    Blade length: 82mm.
    Blade thickness: 3.7mm.
    Length closed: 111mm.
    Total length: 189mm.
    Thickness when closed: 16.2mm.
    Weight: 133g.
    Opening: via ambidextrous pin
    Washers: steel
    Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
    Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
    Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
    Notes: Shinogi Zukuri type blade sharpening

    R-CHIZDP
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  4. Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife

    Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

    Checked and certified by our internal laboratory - Collini Cutlery.

    The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

    Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

    Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
    Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Total length: 210 mm.
    Weight: 145 g.
    Closure: Liner Lock in 402J2 steel at 52HRC
    Clip: 402J2 to 52HRC steel
    Notes: Accompanied by a guarantee certificate with technical specifications.

    RO-S-ZDP-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  5. Rockstead - Shin knife DLC - YXR7 - knife

    This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

    Blade: XR-7 steel at 64.3 HRC with DLC treatment
    Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
    Blade length: 95 mm.
    Blade thickness: 4 mm.
    Total length: 210 mm.
    Weight: 145 g.
    Closing: Liner Lock in 402J2 steel at 52HRC
    Clip: in 402J2 steel at 52HRC
    Notes: Accompanied by a warranty certificate with technical specifications.

    RS-SHIN-B
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  6. Rockstead - TEI DLC - 65hrc - knife collection

    This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

    Full length: 213.00 mm
    Blade length: 93.00 mm
    Weight: 155 g
    Thickness: 3.70 mm
    Material: YXR7
    Hardness: HRC65
    Blade geometry: Honzukuri
    Hard coating: DLC
    Knives type: Folder

    RO-TEI
    €0.00
    Only -20 left
    Only -20 left
    Rating:
    100%
    5
    Out of stock
  7. Rockstead - SAI Titanium ZDP-189 - knife

    Rockstead - SAI Titanium ZDP-189 - knife

    Blade: ZDP-189 in 66.8HRC
    Handle material: titanium
    Blade length: 80 mm.
    Blade Thickness: 3.7 mm.
    Overall length: 190 mm.
    Weight: 140g.
    Closure: liner lock
    Sheath: Black leather
    Notes: Accompanied by a certificate of guarantee with the technical specifications.

    SAI
    €0.00
    Only 0 left
    Only 0 left
    Out of stock
  8. Rockstead - Beetle Clad Steel - coltello

    Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

    Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

    Lama: Acciaio SanMai CLA189 composto da due guance esterne in ATS-34 a 61.9 HRC e da un tagliente in ZDP189 a 67.2 HRC
    Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
    Lunghezza lama: 80 mm.
    Spessore della lama: 4 mm.
    Lunghezza totale: 190 mm.
    Peso: 110 g.
    Chiusura: Liner Lock in acciaio 402J2 a 46HRC
    Clip: in acciaio 402J2 a 45HRC
    Note: Accompagnato da certificato di garanzia con specifiche tecniche.
    4050
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  9. Rockstead - Chi HPC - knife

    Rockstead - About HPC - knife

    With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

    Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

    Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
    Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
    Blade length: 82 mm.
    Blade Thickness: 4 mm.
    Overall length: 189 mm.
    Weight: 100 g.
    Lock: Liner Lock 402J2 steel at 52HRC
    Clip: 402J2 steel at 48HRC
    Notes: Accompanied by a certificate of guarantee with the technical specifications.

    4067DLC
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  10. Rockstead - Kou-S DLC - coltello

    Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

    Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

    Lama: acciaio Hitachi YXR7 a 64.7HRC con copertura DLC 3micron - Hv1800
    Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
    Lunghezza lama: 82 mm.
    Spessore della lama: 3.5 mm.
    Lunghezza totale: 182 mm.
    Peso: 100 g.
    Chiusura: Liner Lock in acciaio 402J2 a 52HRC
    Clip: in acciaio 402J2 a 52HRC
    Note: Modello numerato e accompagnato da certificato di garanzia con specifiche tecniche.
    4058
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  11. Rockstead - Kou-S ZDP-189 - coltello

    Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

    Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

    Lama: Acciaio inox ZDP189 a 67.1 HRC
    Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
    Lunghezza lama: 82 mm.
    Spessore della lama: 3.5 mm.
    Lunghezza totale: 182 mm.
    Peso: 100 g.
    Chiusura: Liner Lock in acciaio 402J2 a 52HRC
    Clip: in acciaio 402J2 a 52HRC
    Note: Accompagnato da certificato di garanzia con specifiche tecniche.
    4057
    €0.00
    Only -20 left
    Only -20 left
    Rating:
    87%
    4.4
    Out of stock
  12. Rockstead - Shin-A Wind Ripple HPC Limited Edition - coltello

    Con il marchio Rockstead, della Ishida Co. di Sakai in Giappone, vengono commercializzati i migliori coltelli industriali attualmente reperibili sul mercato.

    Punti di forza di questi coltelli sono l'assoluta precisione delle lavorazioni a controllo numerico, l'utilizzo di acciai tecnologicamente avanzati, le elevatissime durezze delle lame che garantiscono incredibili capacità di taglio, penetrazione e tenuta del filo ed i meccanismi di apertura e chisura che sanno garantire la massima sicurezza senza rinunciare al comfort ed alla fluidità d'uso.

    Lama: Acciaio al carbonio YXR-7con tagliente a 65.1 HRC e trattamento superficiale HPC
    Manicatura: Alluminio aeronautico A6063S con trattamento black alumite a Hv400
    Lunghezza lama: 88 mm.
    Spessore della lama: 4 mm.
    Lunghezza totale: 210 mm.
    Peso: 154 g.
    Chiusura: Liner Lock in acciaio 402J2 a 50HRC
    Clip: in acciaio 402J2 a 50HRC
    Note: Esemplare in edizione limitata, realizzato per lo show Arms & Hunting 2011 tenutosi dal 13 al 16 ottobre a Mosca, Russia. Accompagnato da certificato di garanzia con specifiche tecniche.
    4072
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
Set Ascending Direction

12 Items





ecommerce sicuro