Spade fantasy, spade storiche, spade medievali, katana

Glamdring was the sword forged for the Elven Lord Turgon in the First Age.
It has been lost for thousands of years, until it was found by Gandalf (along with Goad and Orcrist) in the Trolls' lair in The Hobbit, who kept it to himself, and continued to wear it throughout the events of the Lord of the Rings trilogy. .

Glamdring is translated "Battenemici", and the orcs in The Hobbit disparagingly refer to it as "Hammer".

Glamdring, together with her twin Orcrist, come in The Hobbit as accompanied by splendid scabbards and with the handle richly decorated with jewels.
In the Unfinished Tales, one of the notes to Tuon's story was "... white and gold ... in an ivory sheath ..." Glamring bench is not mentioned, assuming it is the definite sword.

Gandalf's official sword from The Hobbit movie and produced by United Cutlery

Details:
- Blade material: AUS-6 stainless steel
- Handle material: cast metal with leather cover
- Total length: 121 cm
- Blade length: 89.5 cm
- Wooden display plate
- Authenticity certificate

Production: semi-craftmade

Blade: sharpened steel AISI 1060 high carbon content
Blade length (including habaki): 23,50cm.
Motohaba: 2.55cm.
Sakihaba: 2cm.
Sori: -
Blade thickness: 6mm.
Kissaki: 2.5cm.
Tsukamaki length: 9cm.
Total lenght: 35,3cm.
Weight: 348g. (without scabbard) - 442g. (including scabbard)
Balance: advanced, at 1cm
Saya: black varnished wood
Handle: same white with black cotton tsukagawa
Sageo: black cotton
Fuchi and Kashira: brass
Habaki and Menuki: brass
Seppa: brass
Notes: -

Small technical glossary: Hamon: tempering line on the blade * Hi: deep groove in the blade, also called colasangue * Saya: scabbard of the sword * Tsuka: grip * Tsukamaki: weave on the grip * Tsuka-Ito or Tsuka-gawa: webbing of cotton, silk or leather that wraps around the grip * Tsuba: guard * Fuchi: ornament between guard and sleeve * Kashira: ornament at the end of the sleeve * Menuki: medallions placed under the cordage of the sleeve * Habaki: collar that wraps around the beginning of the blade * Seppa: trimmings of the guard * Shitodome: trimmings to which the Sageo is tied * Motohaba: height of the blade at the habaki * Sakihaba: height of the blade at the kissaki.

These handcrafted iaito stand out for their classic line and for their functional quality, which is well coupled with the traditional manufacturing techniques and the materials used.
The blades are carbon hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered to 60 HRC for excellent cutting, penetration and flexibility. The blade is then hand-polished on stone and the sword is finished in every single detail.

Given the high craftsmanship nature of these swords, we would like to clarify that the photo is purely for illustrative purposes as designs of tsuba fuchi and kashira may differ from the one shown here as well as the weights and measures of the sword may differ, albeit slightly. .

Blade: in DNH7 steel with high carbon content with selective clay hardening 60 / 40HRC not sharpened
Hamon: irregular Gunome style
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3cm.
Sakihaba: 2.2cm.
Sori1.5cm
Blade thickness: 5.5mm.
Kissaki: 3.5cm.
Tsukamaki length: 25.5cm.
Total length: 102.5cm.
Katana weight: 910g.
Weight with Saya: 1170g.
Balance: advanced, at 12.5cm. from Tsuba
Saya: black lacquered wood and buffalo horn
Tsuka-ito: -
Sageo: -
Tsuba: antiqued metal
Fuchi, Kashira, Menuki, Seppa and Shitodome: bronze
Country of production: Cambodia
Habaki: copper
Note: -

Small technical glossary: ​​Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: weaving in cotton, silk or leather that wraps around the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cord of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Sori: curvature of the blade

Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.

High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.

Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp

THE CHARACTER:

Geralt of Rivia, also called Gwynbleidd - white wolf in the ancient language of the Dryads - and nicknamed "The Butcher of Blaviken" is an witcher, protagonist of the saga of the same name set in the imaginary fantasy universe created by the Polish writer Andrzej Sapkowski.

From the famous series of books of which he is the protagonist were also drawn various media, including a film, a television series and a trilogy of international success.
 

THE SWORD:

Blade: 440C stainless steel without sharpening
Handle: black rope
Knob: in aluminum alloy
Guard: in steel
Blade length: 89.5cm
Total length: 124.5cm.
Sheath: in leather, with rigid insert, steel trim and belt for hooking
Packaging: cardboard box
Notes: Detailed replication of good quality, but not official, without original logos and licenses

Kurgan, also known as Victor Kruger, is Connor McCleod's main antagonist in the movie Highlander - The Last Immortal, in which he is played by actor Clancy Brown.

Kurgan is defined by Ramírez (McCleod's mentor) as "the strongest of all immortals and the most cruel of warriors".

In addition to the first film, he is also the protagonist in the novels and comics taken from the film series, in which his story of battles, scars and pain is best told, mostly to his enemies.

Blade: 440A stainless steel
Blade length: 950 mm
Total length: 1240 mm
Handle length: 21 cm with leather cover
Total length: 25 cm
Guard and knob: metal
Sword weight: 2500 gr
Production: Spain

Non Nobis, Domine, Non Nobis, Sed Nomini Tuo Da Glorium
These iconic words engraved on the blade define this historic sword replica. The creed of the Knights Templar - Nothing for us, Lord, nothing for us but for the glory of thy name - marked their illustrious and sometimes infamous 200 year military influence.
This magnificent sword named The Accolade would have been a sword worthy of the Grand Master to knight a loyal member into this holy order. The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability.
The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonomous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

- Overall length: 101,5cm
- Blade length: 82cm
- Width of the blade: 5.8 cm
- Weight: 1640 gr
- Blanciatura: 13cm from the guard branch
- Accessories: scabbard and leather belt

United to the happiness of many fans, has re-proposed reproductions of the beautiful elven daggers of Legolas. Sold in pairs with the wooden display stand, the dagger blades measure 40 cm and have a maximum thickness of 5 mm;

total length 57 cm.

Weight each 438 g.

Sword suitable for practice with balanced weight and good balance. Good level of finishes and excellent quality / price ratio.

Blade: ** NOT SHARPENED ** in 1060 high carbon steel - not sharpened
Hamon: suguha style
Blade length (including habaki): 64cm.
Blade length (excluding habaki): 61cm.
Motohaba: 3.1cm.
Sakihaba: 2.2cm.
Blade thickness: 6.5 (habaki) / 5 (at the tip) mm.
Kissaki: 4cm.
Tsukamaki length: 25.5cm. (total grip 29 cm.)
Total length: 93cm
Weight: 1004g. without saya (1203g. with saya)
Balance: advanced to 11cm. from tsuba
Saya: black painted wood
Tsuka-ito: black cotton on the same white color
Sageo: black cotton
Tsuba, Fuchi and Kashira: black painted brass
Habaki, Menuki, Seppa and Shitodome: brass
Notes: the sword is accompanied by a cotton bag

Blade: AISI 1060 HCS folded (Damascus) with a high content of carbon - not sharpened
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 72,8cm.
Motohaba: 3.0cm.
Sakihaba: 2.4cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24,5cm.
Total Length: 103cm.
Weight: 1034g.
Balance: advanced to 10,5cm from tsuba
Saya: wood polished black
Tsuka-ito: Black Cotton on black samekawa
Sageo: black silk
Tsuba, Fuchi and Kashira: black metal
Habaki and Menuki: antique metal
Seppa: Brass
Note: the sword is accompanied by silk bag and a padded carrying bag

YariNoHanzo - NIOH Folded Katana - YNHR11 - katana

Blade: AISI 1060 HCS folded (damask) high carbon content - not sharpened
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70,5cm.
Motohaba: 3.0cm.
Sakihaba: 2.4cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 25cm.
Total length: 101,5cm.
Weight: 1168g.
Balance: advanced, at 11cm from tsuba
Saya: wood shiny black
Tsuka-ito: brown cotton on black samekawa
Sageo: brown cotton
Tsuba, Fuchi and Kashira: black metal
Habaki and Menuki: antique metal
Seppa: iron
Note: the sword is accompanied by silk bag and a padded carrying bag

YariNoHanzo - Basic Iaito - YNHR14 - katana

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 67cm.
Motohaba: 3.0cm.
Sakihaba: 2.1cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.0cm.
Tsukamaki Length: 24,5cm.
Total length: 96cm.
Weight: 928G.
Balance: advanced to 11,5cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: antique ametallo
Seppa: Brass
Note: the sword is accompanied by cotton bag

YariNoHanzo - Dojo Plus Iaito - YNHR15 - katana

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70,5cm.
Motohaba: 3.0cm.
Sakihaba: 2.1cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 24cm.
Total length: 101.5cm.
Weight: 895g.
Balance: advanced to 10,5cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: antique ametallo
Seppa: silver
Note: the sword is accompanied by cotton bag

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.0cm.
Sakihaba: 2.2cm.
Sori: 2.0cm.
Blade thickness: 7 / 5mm.
Kissaki: 4.7cm.
Tsukamaki Length: 24cm.
Total length: 101.0cm.
Weight: 904g.
Balance: advanced, at 12cm from tsuba
Saya: wood satin black
Tsuka-ito: cotton black on black samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: silver
Seppa: silver
Note: the sword is accompanied by cotton bag

YariNoHanzo - Dragonfly Katana - YNHR5 - katana

This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.0cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 25cm.
Total length: 101.0cm.
Weight: 1104g.
Balance: advanced, at 11cm from tsuba
Saya: wood shiny black
Tsuka-ito: cotton black on white samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: Copper
Seppa: Copper
Note: the sword is accompanied by cotton bag

YariNoHanzo - Practical Musashi Katana - YNHR9 - katana

This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 68cm.
Motohaba: 3.2cm.
Sakihaba: 2.3cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 5cm.
Tsukamaki Length: 24cm.
Total length: 98.5cm.
Weight: 1122g.
Balance: advanced to 10,5cm from tsuba
Saya: wood shiny black
Tsuka-ito: cotton black on white samekawa
Sageo: black cotton
Tsuba, Fuchi and Kashira: black metal
Habaki and Menuki: silver
Seppa: silver
Note: the sword is accompanied by cotton bag

YariNoHanzo - Tsuru Red Katana - YNHR6 - katana

This sword is part of the "Series R", an exclusive line, destined only to the best retailers YariNoHanzo Italian brand, designed for practitioners of Iaido, kendo and katori. The sword is removable and suitable for the practice; has balanced weight and good balance.

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 70cm.
Motohaba: 3.0cm.
Sakihaba: 2.3cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.9cm.
Tsukamaki Length: 25cm.
Total length: 101.5cm.
Weight: 1058g.
Balance: advanced to 13,5cm from tsuba
Saya: wood shiny black
Tsuka-ito: cotton red on white samekawa
Sageo: cotton red
Tsuba, Fuchi and Kashira: antiqued metal
Habaki and Menuki: Copper
Seppa: Copper
Note: the sword is accompanied by cotton bag

This sword is part of the "Series R", an exclusive line, designed to the very best retailers Italian brand YariNoHanzo, designed for practitioners of Iaido, Kendo and katori. The sword is removable and suitable for practice; has balanced weight and good balance.

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 71.5cm.
Motohaba: 3.2cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24cm.
Overall Length: 98.5cm.
Weight: 1076g.
Balance: advanced to 11cm from tsuba
Saya: black satin wood
Tsuka-ito: Cotton Purple on black samekawa
Sageo: cotton purple
Tsuba, Fuchi and Kashira: antique metal
Habaki and Menuki: copper
Seppa: copper
Note: The sword is accompanied by cotton bag

This sword is part of the "Series R", an exclusive line, designed to the very best retailers Italian brand YariNoHanzo, designed for practitioners of Iaido, Kendo and katori. The sword is removable and suitable for practice; has balanced weight and good balance.

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 72.5cm.
Motohaba: 3.2cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24.5cm.
Total Length: 101cm.
Weight: 1098g.
Balance: advanced, at 13.5cm from tsuba
Saya: black painted wood
Tsuka-ito: cotton blue on a white samekawa
Sageo: blue cotton
Tsuba, Fuchi and Kashira: antique metal
Habaki and Menuki: copper
Seppa: copper
Note: The sword is accompanied by cotton bag

This sword is part of the "Series R", an exclusive line, designed to the very best retailers Italian brand YariNoHanzo, designed for practitioners of Iaido, Kendo and katori. The sword is removable and suitable for practice; has balanced weight and good balance.

Blade: carbon steel 1045 - Blunt
Hamon: style note, by acid treatment
Hi: bo-hi
Blade length: 72.5cm.
Motohaba: 3.2cm.
Sakihaba: 2.2cm.
Sori: 2.5cm.
Blade thickness: 8 / 5mm.
Kissaki: 4.5cm.
Tsukamaki Length: 24.5cm.
Total Length: 101cm.
Weight: 1078G.
Balance: advanced to 12cm from tsuba
Saya: black painted wood
Tsuka-ito: Cotton white on black samekawa
Sageo: white cotton
Tsuba, Fuchi and Kashira: antique metal
Habaki and Menuki: copper
Seppa: copper
Note: The sword is accompanied by cotton bag

The Valyrian Steel Collection is a series of reproductions with official licenses , fantasy weapons in the universe created by best-selling books by George RR Martin "Chronicles of Ice and Fire ."

Every single product is a limited edition made with the best materials available, and with particular attention to finishes and details .

Longclaw - The Sword of Jon Snow
Blade: not sharp , stainless steel
Guard and pommel : Metal and metal antique nickel finish with white acrylic gems embedded
Handle: Leather
Support Exhibition : From the wall , wood
Blade Length : 89cm
Total Length : 115cm .
Notes: Supplied with a certificate of authenticity and warranty - blade numbered - numbered guarantee certificate

Jon Snow
Jon Snow was born in duecentottantatreesimo year after the conquest of the Western Continent by Aegon Targaryen ; is the illegitimate son of Eddard Stark, played by a woman whose father has never revealed the name .
The name was given in honor of the patron of Ned , Jon Arryn , while the name "Snow " in the North is traditionally given to the bastard children of high birth . Despite not being a legitimate Stark , Jon was accepted by his father and grew up along with the rest of the family. He had the same education in the same age -brother , Robb , with whom he is on good terms , along with Arya , Bran and Rickon . Sansa , by contrast, has always been indifferent , while Lady Catelyn has never accepted , often coming to hate him . Jon is physically very similar to his father, tall , with dark hair and gray eyes . It also has the honor and temperament .

cintura in cuoio nera con supporto porto spada Rapier

Faithful reproduction of the ceremonial Wakizashi dating back to the Japanese Edo period. Precisely carved and chiseled resin scabbard, tsuba and hilt depicting rural scenes.

Blade: not sharpened in 440 stainless steel
Blade length (including habaki): 50.7cm.
Sori: 2.4cm
Blade thickness: 6mm.
Kissaki: 2.5cm.
Total length: 73cm.
Weight: 832g. (without sheath) - 1324g. (including scabbard)
Balance: advanced, at 1cm
Handle: resin
Sheath: in resin

Small technical glossary: ​​Hamon: temper line on the blade * Hi: deep groove in the blade, also called blood-cola * Saya: sword sheath * Tsuka: handle * Tsukamaki: weave on the handle * Tsuka-Ito or Tsuka-gawa: webbing cotton, silk or leather that wraps the handle * Tsuba: guard * Fuchi: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which the Sageo is linked * Motohaba: height of the habaki blade * Sakihaba: height of the kissaki blade.

A Game of Thrones - Playing use the book holder of Thrones - NN0071 - Game of Thrones

Reproduction official holder to use the book of the "Game of Thrones" is the TV series Game of Thrones

Official product of Noble Collection behind the official HBO licenses

Size: 19cm x 13cm x 13cm

Pendant of the House Stark, made entirely of 925 sterling silver, has dimensions of 25x20mm
Official product of Noble Collection behind the official HBO licenses

Marto's official reproduction of Conan's sword, used by Arnold Schwarzenegger in the movie Conan the Barbarian

Blade: 440 stainless steel
Production: Spain
Blade length: 72.5 cm
Total length: 103 cm
Handle length: 21.5 cm
Guard and knob: in bronze-colored zamak alloy
Sword weight: 3.5 kg

Blade: 1060 steel with high carbon content not sharpened
Hamon: in style to notice
Hi: bo-hi
Blade length: 70.5cm. (72.5cm with habaki)
Total length: 100.5cm.
Blade thickness: 8mm.
Weight: 910g.
Saya and handle: light wood and buffalo horn
Tsuka-Ito and Sageo: absent
Tsuba, Fuchi and Kashira: absent
Menuki, Seppa and Shitodome: absent
Habaki: Copper
Note: -

Piccolo glossario tecnico: Hamon: linea di tempra sulla lama * Hi: profondo solco nella lama, detto anche colasangue * Saya: fodero della spada * Tsuka: impugnatura * Tsukamaki: intreccio sull'impugnatura * Tsuka-Ito o Tsuka-gawa: fettuccia di cotone, seta o pelle che avvolge l'impugnatura * Tsuba: guardia * Fuchi: ornamento tra guardia e manicatura * Kashira: ornamento alla fine della manicatura * Menuki: medaglioni posti sotto il cordame della manicatura * Habaki: collare che fascia l'inizio della lama * Seppa: guarnizioni della guardia * Shitodome: guarnizioni alle quali è legato il Sageo * Motohaba: altezza della lama all'habaki * Sakihaba: altezza della lama al kissaki.

Riproduzione ufficiale Marto della spada di Conan, utilizzata da Arnold Schwarzenegger nel film Conan il Barbaro

Lama: acciaio inossidabile 440
Produzione : Spagna
Lunghezza lama: 72.5 cm
Lunghezza totale: 95.5 cm
Lunghezza impugnatura: 20 cm
Guardia e pomolo: in lega di zama color bronzo
Peso spada : 2.2 kg

Riproduzione ufficiale Marto della spada di Conan, utilizzata da Arnold Schwarzenegger nel film Conan il Barbaro

Lama: acciaio inossidabile 440
Produzione : Spagna
Lunghezza lama: 72.5 cm
Lunghezza totale: 95.5 cm
Lunghezza impugnatura: 20 cm
Guardia e pomolo: in lega di zama color argento
Peso spada : 2.2 kg

Con questa spada, frutto della collaborazione con Davis Panzer Productions, inizia la storia di Highlander ed ora Marto presenta questa splendida riproduzione dettagliatissima.

Questa infatti è la spada originale del Clan MacLeod impugnata dal giovane Connor MacLeod nella sua battaglia fatale contro il Kurgan ed utilizzata poi come lapide per custodire la sua amata moglie scomparsa, Heather.

- Lama in acciaio 440 lucidata a specchio e priva di filo

- Impugnatura in acciaio inciso e brunito con intreccio in cuoio

- Lunghezza della lama di 109cm.

One-handed classic medieval sword that contains all the characteristics of the 1300s blades.

Blade: high carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 84cm.
Total length: 100cm.
Blade thickness: 4mm.
Weight: 1445g.
Weight with scabbard: 1870g.
Balance: Advanced to 13.5cm.

Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"

Handcrafted by Windlass Steelcrafts® expert blacksmiths

- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hilt

Blade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.

© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.

One-handed sword used by the ancient Greeks.
It was the primary weapon in the battlefield for the Greek armies along with the spear or javelin.
The blade was about two feet long.
The xiphos were good for both cutting and tip attacks thanks to the leaf shape of the blade.
It was generally used only when the spear was abandoned. The straight, double-edged design of the xiphos gave them the same general versatility found in swords used by infantry until firearms displaced the sword on the battlefield.
Its design lent itself to cutting and pushing.

Blade: high carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 560mm.
Total length: 720mm.
Blade thickness: 3mm.
Weight: 960g.
Weight with Sheath: 1350g.
Balance: 8 cm from the guard
Sheath: in wood and leather

This splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so that you can use a second hand in support but can also use the sword in one hand. thanks to its weight and small size.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total length: 105cm.
Blade width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -

Blade: carbon steel WITH ARROUNDED POINT and 4 MM THREAD suitable for battle ready
Grip: leather
Pommel: Carbon steel
Guard: carbon steel
Scabbard: leather and steel
Blade length: 99cm.
Total length: 127.5cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1840g.
Balance: 11cm.

Spada a una mano e mezza dall'ottima bilanciatura. Finitura bronzea su pomo, guardia e particolari in metallo del fodero.

Lama: in acciaio ad alto tenore di carboniopriva di filo
Lunghezza totale: 113 cm.
Lunghezza lama: 90,5 cm.
Spessore lama all’elsa: 4 mm.
Spessore lama alla punta: 3 mm.
Bilanciatura: avanzata a 12,5 cm dall’elsa.
Lunghezza impugnatura: 21 cm. (15,4 cm. la parte con copertura in cuoio)
Lunghezza elsa: 21 cm.
Peso spada: 1.140g.
Peso con fodero: 1.440g.
Fodero: pelle nera e acciaio
Impugnatura: pelle nera
Note: utilizzabile per praticare forme o per contatti leggeri/medi