bing

Spyderco

Shop By
Shopping Options
Brand
  1. Spyderco 200items
  2. Approved 13items
Less
Stock
  1. In Stock 50items
  2. Out of Stock 163items
Rating
  1. 5
    10items
  2. 4
    & up
    44items
  3. 3
    & up
    47items
Set Ascending Direction

Items 1-48 of 213

Page
  1. Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: USA
    Blade: K390 steel at 64/65HRC
    Blade finish: Satin finish
    Handle: FRN (Fiberglass Reinforced Nylon)
    Blade Length: 74mm.
    Blade thickness: 4mm.
    Length closed: 111mm.
    Total length: 182mm.
    Weight: 108g.
    Closure: Compression Lock
    Clip: removable and reversible, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: variant in FRN Blue made from Bohler K390 carbon steel

    C69PBL3K390
    €250.00
    Only 1 left
    Only 1 left
  2. Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased and Used
    Conditions: In excellent conditions
    Available in the market: Out of production since 2010
    Sharpening: Factory
    Marks on blade: NO
    Marks on handle: NO
    Box: Present
    Sheath: -
    Manuals, Certificates, and Warranties: No
    Checked and Certified by our internal laboratory
    Intended use: Sport / Collection

    Type of production: Industrial
    Blade Production: USA
    Blade: In CPM-S30V stainless steel
    Blade finish: Satin
    Handle: G10
    Blade Length: 87mm.
    Blade Thickness: 3.5mm.
    Closed Length: 122mm.
    Total Length: 210mm.
    Weight: 110g.
    Closure: Compression Lock
    Clip: Painted stainless steel
    Packaging: Cardboard box with Spyderco logos
    Notes:

    AP-C81GS
    €184.43
    Only 1 left
    Only 1 left
  3. Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife

    A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

    A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

    Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


    Intended use: sub/sporting

    Type of production: industrial
    Country of manufacture: Japan
    Blade: nitrogen steel H1
    Blade finish: satin-finished
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 175mm.
    Thickness when closed: 15mm.
    Weight: 54g.
    Closure: Back Lock
    Clip: removable, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    SC88SYL
    €122.13
    Only 1 left
    Only 1 left
  4. Spyderco - Chaparral knife Gray FRN - PRIVATE COLLECTION - C152PGY - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Condition: Like New
    Available in stores: YES
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: NO
    Packaging: YES
    Checked and Certified by our internal laboratory
    Intended use: Sport / EDC

    Type of production: Industrial
    Country of production: Taiwan
    Blade: In CTS-XHP stainless steel with full flat sharpening
    Blade treatment: satin finish
    Handle: FRN Fiberglass Reinforced Nylon bearing
    Blade length: 71mm.
    Blade thickness: 2mm.
    Closed length: 91mm.
    Total length: 163mm.
    Closed thickness: 7.5mm.
    Weight: 60g.
    Closure: Back Lock
    Clip: in stainless steel, flush, removable and reversible
    Packaging: cardboard box with Spyderco logos
    Note: Design by Sal Glesser

    C152PGY
    €110.65
    Only 1 left
    Only 1 left
  5. Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife

    Intended Use: Sporting

    Type of production: industrial
    Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
    Blade treatment: satin finish
    Country of manufacture: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 96mm.
    Blade thickness: 3mm.
    Length closed: 127mm.
    Total length: 222mm.
    Weight: 105g.
    Closure: Back Lock
    Clip: removable, multi-position, stainless steel
    Packaging: cardboard case with Spyderco logos
    Notes: variant in FRN Blue made from Bohler K390 carbon steel

    C10FSK390
    €180.33
    Only 1 left
    Only 1 left
  6. Spyderco - Paramilitary 2 knife - Brown Canvas Micarta - CruWear steel - C81MPCW2 - knife

    The Spyderco Paramilitary 2 is one of the most popular knives on the market, known for its high build quality, premium materials, attractive aesthetics, and ease of one-handed use. These characteristics have made it very popular among soldiers, builders, hunters, survivalists, and everyday knife carriers around the world. Every knife enthusiast should have a PM2 in their collection.

    The Paramilitary 2 is available in numerous versions, with different colors and materials for the blade and handle. However, it should be noted that, due to the full liners, this knife is not compatible with most aftermarket components.

    The Paramilitary 2 is the second version of the old Para Military, a model designed by Spyderco as a more compact and accessible version of their Military model. If you're looking for something even more compact, the Para 3 might be the right choice.

    Intended use: Sporting / Collection

    Type of production: Industrial
    Blade production: USA
    Blade: In CPM-CRUWEAR stainless steel
    Blade treatment: Satin
    Handle: Micarta
    Blade length: 87mm.
    Blade thickness: 3.5mm.
    Closed length: 122mm.
    Total length: 210mm.
    Closed thickness: -
    Balance: -
    Weight: 110g.
    Closure: Compression Lock
    Clip: in stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C81MPCW2
    €243.44
    Only 1 left
    Only 1 left
  7. Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife

    Intended Use: Sporting/EDC

    Production Type: Industrial
    Blade production: Japan
    Blade: Stainless steel VG-10
    Blade Treatment: Black TiCN - Titanium Carbonitride
    Handle: FRN
    Blade Length: 49mm.
    Blade thickness: 2.5mm.
    Length closed: 64mm.
    Total lenght: 113mm.
    Thickness when closed: 8mm.
    Weight: 19g.
    Closure: Back Lock
    Clip: -
    Package: cardboard case with Spyderco logos
    Notes: -

    SMWBK
    €77.87
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  8. Spyderco - Para 3 - CPM-S45VN and G10 Digital Camo - C223GPCMO - knife

    Intended Use: Sporting / Tactical

    Production Type: Industrial
    Country of Production: USA
    Blade: Stainless steel CPM-S45VN
    Blade Treatment: Stonewashed
    Handle: G-10
    Blade Length: 75mm.
    Blade thickness: 3.7mm.
    Length closed: 109mm.
    Total length: 184mm.
    Weight: 96g.
    Closure: Compression Lock
    Clip: Stainless steel
    Package: cardboard box with Spyderco logos
    Notes: new 2021 version with CPM-S45VN steel and Stonewashed finish

    C223GPCMO-S45
    €217.21
    Only 1 left
    Only 1 left
  9. Spyderco - Endela - Plain Black - C243PBK - Knife

    Intended use: Sporting

    Type of production: industrial
    Blade: Stainless steel VG-10
    Blade finish: satin finish
    Country of manufacture: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 87mm.
    Blade thickness: 3mm.
    Length closed: 119mm.
    Total length: 206mm.
    Thickness when closed: 15.5mm.
    Weight: 88g.
    Closure: Back Lock
    Clip: Removable, multi-position stainless steel clip
    Notes: -

    C243PBK
    €118.85
    Only 1 left
    Only 1 left
  10. Spyderco - Police - Half Serrated - C07PS - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Japan
    Blade: Stainless steel VG-10
    Blade Treatment: Satin finish
    Handle: Satin-finished stainless steel
    Blade length: 104mm.
    Blade thickness: 3mm.
    Length closed: 135mm.
    Total length: 240mm.
    Thickness when closed: 8mm
    Weight: 162g.
    Closure: Back Lock
    Clip: multi-position, removable, stainless steel
    Package: cardboard box with Spyderco logos
    Notes: -

    C07PS
    €204.10
    Only 1 left
    Only 1 left
  11. Spyderco - Para 3 CPM-SPY27 Lightweight - C223PCBL - knife

    Intended Use: Sporting

    Production type: Industrial
    Country of Production: Usa
    Blade: Stainless steel CPM-SPY27
    Blade treatment: Satin finish
    Handle: FRN (Fiberglass Reinforced Nylon)
    Blade Length: 75mm.
    Blade thickness: 3.8mm.
    Length closed: 109mm.
    Total length: 184mm.
    Weight: 68g.
    Closure: Compression Lock
    Clip: removable and reversible, flush stainless steel clip
    Package: cardboard box with Spyderco logos
    Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.

    C223PCBL
    €188.52
    Only 1 left
    Only 1 left
  12. Spyderco - Para 3 Lightweight - FRN Black - C223PBK - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: USA
    Blade: CTS BD-1 stainless steel
    Blade treatment: Satin finish
    Handle: FRN (Fiberglass Reinforced Nylon)
    Blade length: 75mm.
    Blade thickness: 3.8mm.
    Closed length: 109mm.
    Total length: 184mm.
    Weight: 68g.
    Closure: Compression Lock
    Clip: removable and reversible, flush, in stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: lighter and cheaper version of the Para 3 C223GP model

    C223PBK
    €154.92
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  13. Spyderco - Tenacious Lightweight - Black Plain - C122PBBK - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade finish: Teflon coating
    Handle: FRN (Fiberglass Reinforced Nylon)
    Blade length: 85mm.
    Blade thickness: 3mm.
    Length closed: 110mm.
    Total length: 195mm.
    Thick when closed: 16mm.
    Weight: 105g.
    Closure: Liner Lock
    Clip: Removable, multi-position, Teflon coated stainless steel
    Packaging: cardboard box with Spyderco logos
    Note: -

    C122PBBK
    €72.95
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  14. Spyderco - Emphasis - C245GP - folding knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade finish: Satin finish
    Handle: Stainless steel and G-10
    Blade length: 91mm.
    Blade thickness: 3mm.
    Length closed: 122mm.
    Total length: 211mm.
    Weight: 147g.
    Closing system: Liner Lock
    Clip: Removable and multi-position, in stainless steel
    Packaging: cardboard box with Spyderco logos
    Note: -

    C245GP
    €83.61
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  15. Spyderco - Insistent - C246GP - folding knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: China
    Blade: 8Cr13MoV stainless steel
    Blade finish: Satin finish
    Handle: Stainless steel and G-10
    Blade length: 63mm.
    Blade thickness: 3mm.
    Length closed: 94mm.
    Total length: 155mm.
    Weight: 113g.
    Closing system: Liner Lock
    Clip: Removable and multi-position, in stainless steel
    Packaging: cardboard box with Spyderco logos
    Note: -

    C246GP
    €67.21
    Only 1 left
    Only 1 left
  16. Spyderco - Bench Stone Fine 302F - Benchstone ceramic stone

    Made of ceramic material, this fine-grained Spyderco bench stone is perfect for sharpening cutting tools such as kitchen knives, collections, chisels.
    Production: U.S.A.
    Dimensions: 200x50x10 mm.

    It is used dry, without water or oil.

    SP-302F
    €105.74
    Only 1 left
    Only 1 left
  17. Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife

    Intended use: sports

    Type of production: Industrial
    Country of production: Japan
    Blade: VG-10 stainless steel
    Blade treatment: Satin finish
    Handle: FRN with stainless steel drowned folders
    Blade length: 57mm.
    Blade thickness: 2.5mm.
    Closed length: 84mm.
    Total length: 141mm.
    Weight: 37g.
    Opening: via Emerson Wave system or through the "SpyderHole" blade recess
    Closure: Back Lock
    Clip: stainless steel, removable and reversible
    Sheath: -
    Packaging: Cardboard box with Spyderco logos
    Note: -

    C28GYW2
    €102.46
    Only 1 left
    Only 1 left
  18. Spyderco - Para 3 - PVD - G10 Digital Camo - C223GCMOBK - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: United States
    Blade: stainless steel CPM-S45VN
    Blade treatment: PVD
    Handle: G10
    Blade length: 75mm.
    Blade thickness: 3.8mm.
    Closed Length: 109mm.
    Overall length: 184mm.
    Weight: 96g.
    Closing: Compression Lock
    Clips: stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C223GPCMOBK
    €225.41
    Only 1 left
    Only 1 left
  19. Spyderco - Shaman - Black PVD Plain Edge - C229GBK - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Usa
    Blade: Stainless steel CPM-S30V Powder Steel
    Blade treatment: Black PVD
    Handle: G10 with 3D machining and stainless steel liners
    Blade length: 91mm.
    Blade thickness: 3.8mm.
    Length closed: 119mm.
    Total length: 210mm.
    Weight: 147g.
    Closure: Compression Lock
    Clip: stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: Model inspired by the Native, with a size of about 20%

    C229GBK
    €318.85
    Only 1 left
    Only 1 left
  20. Spyderco - Para 3 - PVD - CPM-S45VN - G10 Black - C223GPBK - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: United States
    Blade: stainless steel CPM-S45VN Powder Steel
    Blade treatment: PVD
    Handle: G10
    Blade length: 75mm.
    Blade thickness: 3.8mm.
    Closed Length: 109mm.
    Overall length: 184mm.
    Weight: 96g.
    Closing: Compression Lock
    Clips: stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C223GPBK
    €225.41
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  21. Spyderco - Alcyone - C222GPGY - knife

    Purpose of use: Sport

    Type of production: Industrial
    Country of production: China
    Blade: stainless steel CTS-BD1
    Blade Treatment: Satin
    Handle: Stainless Steel and G-10
    Blade Length: 74mm.
    Blade thickness: 3mm.
    Closed length: 105mm.
    Overall length: 179mm.
    Closed thickness: 16mm.
    Weight: 93g.
    Closure: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packing: cardboard box with Spyderco logos
    Notes: -

    C222GPGY
    €77.87
    Only 1 left
    Only 1 left
  22. Spyderco - Para 3 - G10 Black - C223G - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: United States
    Blade: stainless steel CPM-S45VN Powder Steel
    Blade treatment: Satin
    Handle: G10
    Blade length: 75mm.
    Blade thickness: 3.8mm.
    Closed Length: 109mm.
    Overall length: 184mm.
    Weight: 96g.
    Closing: Compression Lock
    Clips: stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C223GP
    €217.21
    Only 1 left
    Only 1 left
  23. Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: Japan
    Blade: VG-10 58HRC stainless steel
    Blade treatment: satin finish
    Handle: FRN liners with embedded stainless steel
    Blade length: 75mm.
    Blade Thickness: 2.5mm.
    Closed Length: 107mm.
    Overall length: 180mm.
    Weight: 68g.
    Lock: Back Lock
    Clip: removable, multi-position, stainless steel
    Notes: Sharpening Flat Ground

    C11FWCBK
    €118.85
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  24. Spyderco - Efficient - C216G - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: China
    Blade: 8Cr13MoV Stainless Steel
    Blade treatment: Satin finish
    Handle: Stainless steel and G-10
    Blade length: 76mm.
    Blade thickness: 3mm.
    Closed Length: 104mm.
    Overall length: 180mm.
    Thick when closed: 16mm.
    Balancing: -
    Weight: 116g.
    Lock: Liner Lock
    Clip: Removable and reversible, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C216G
    €69.67
    Only 1 left
    Only 1 left
    Rating:
    83%
    4.2
  25. Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: Japan
    Blade: VG-10 58HRC stainless steel
    Blade treatment: satin finish
    Handle: FRN liners with embedded stainless steel
    Blade length: 75mm.
    Blade Thickness: 2.5mm.
    Closed Length: 107mm.
    Overall length: 180mm.
    Weight: 66g.
    Lock: Back Lock
    Clip: removable, multi-position, stainless steel
    Notes: Sharpening Flat Ground

    12638
    €113.93
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  26. Spyderco - Endura Flat Ground - Zome Green - C10ZFPGR - Knife

    Intended use: Sports

    Type of production: Industrial
    Blade: Stainless Steel VG-10
    Blade treatment: satin
    Production Country: Japan
    Handle: FRN liners with embedded stainless steel
    Blade length: 95mm.
    Blade Thickness: 3mm.
    Closed Length: 125mm.
    Overall length: 220mm.
    Thick when closed: 15.5mm.
    Weight: 94g.
    Lock: Back Lock
    Clip: removable, multi-position, stainless steel
    Notes: Full-Flat Grind

    C10ZFPGR
    €122.13
    Only 2 left
    Only 2 left
    Rating:
    96%
    4.8
  27. Spyderco - Yojimbo 2 by Michael Janich - C85G2 - knife

    Intended use: Tactical / EDC

    Type of production: Industrial
    Country of Origin: USA
    Blade: CPM-S30V stainless steel
    Blade treatment: Satin finish
    Handle: G10 liners with embedded stainless steel
    Blade length: 79mm.
    Blade thickness: 4mm.
    Closed Length: 114mm.
    Overall length: 192mm.
    Thick when closed: 11mm.
    Weight: 113g.
    Closure: Front Lock
    Clip: multi, stainless steel, removable and reversible
    Packaging: cardboard box with Spyderco logos
    Notes: Design by Michael Janich

    12535
    €217.21
    Only 1 left
    Only 1 left
  28. Spyderco - Paramilitary 2 - G10 Black - C81GP2 - knife

    type of production: Industrial


    Country of production: United States
    Blade: Stainless steel CPM-S45VN Steel Powder
    Blade treatment: Satin
    Handle: G10 Black
    blade length: 87mm.
    blade thickness: 3.5mm.
    closed length: 122mm.
    total length: 210mm.
    thick when closed: -
    Balancing: -
    Weight: 110g.
    Closed: Compression Lock
    Clips: stainless steel
    Package: cardboard box with logos Spyderco
    Notes: -

    C81GP2
    €225.41
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  29. Spyderco - Para Military 2 - G10 Camo - C81GCMO2 - knife

    type of production: Industrial


    Country of production: United States
    Blade: Stainless steel CPM-S45VN Steel Powder
    Blade treatment: Satin
    Handle: G10 Camo
    blade length: 87mm.
    blade thickness: 3.5mm.
    closed length: 122mm.
    total length: 210mm.
    thick when closed: -
    Balancing: -
    Weight: 110g.
    Closed: Compression Lock
    Clips: stainless steel
    Package: cardboard box with logos Spyderco
    Notes: -

    C81GPCMO2
    €225.41
    Only 1 left
    Only 1 left
    Rating:
    97%
    4.9
  30. Spyderco - Endura 4 Knife - Titanium and Damascus - C10TIPD - knife

    Intended Use: Collection

    Type of production: industrial
    Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
    Country of manufacture: Japan
    Handle: brushed titanium
    Blade length: 97mm.
    Blade thickness: 3mm.
    Length closed: 107mm.
    Total length: 222mm.
    Weight: 119g.
    Closure: Back Lock
    Clip: removable, multi-position, stainless steel
    Packaging: leatherette zippered pouch with Spyderco logos
    Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.

    C10TIPD
    €310.66
    Only 1 left
    Only 1 left
  31. Spyderco - Native 5 Lightweight - C41PBK5 - knife

    Intended Use: Sporting / Collection

    Production Type: Industrial
    Blade production: USA
    Blade: Stainless steel CPM-S30V Powder Steel
    Blade Treatment: -
    Handle: FRN Lightweight
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 98mm.
    Total length: 175mm.
    Thickness when closed: 14mm.
    Balance: -
    Weight: 70g.
    Closure: Back Lock
    Clip: Stainless steel
    Packaging: Cardboard box with Spyderco logos
    Notes: -

    C41PBK5
    €159.84
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  32. Spyderco - Delica Flat Ground - Orange - C11FPOR - knife

    Intended use: Sporting

    Type of manufacture: Industrial
    Blade: Stainless steel VG-10 58HRC
    Blade treatment: -
    Blade production: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 180mm.
    Balance: -
    Weight: 66g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: Full-Flat Grind

    C11FPOR
    €113.93
    Only 1 left
    Only 1 left
    Rating:
    83%
    4.2
  33. Spyderco - Cat SC129GP - knife

    Spyderco - Cat SC129GP - knife

    Intended Use: Sport / EDC

    Type of production: Industrial
    Production Lama: Taiwan
    Blade: stainless steel 440C
    Treatment Lama: -
    Handle: G10
    Blade length: 60mm.
    Blade thickness: 2.5mm.
    Closed Length: 90mm.
    Overall length: 150mm.
    Thick when closed: 9mm.
    Balancing: -
    Weight: 72g.
    Lock: Liner Lock
    Clip: yes
    Sheath: -
    Packaging: cardboard box with logos Spyderco
    Notes: -

    SC129GP
    €81.15
    Only 2 left
    Only 2 left
  34. Spyderco - Manbug Lightweight - MBK - knife

    Intended Use: Sport / EDC

    Type of production: Industrial
    Blade Production: Japan
    Blade: Stainless steel VG-10
    Treatment Blade: -
    Handle: FRN
    Blade length: 49mm.
    Blade thickness: 2.5mm.
    Closed Length: 64mm.
    Overall length: 113mm.
    Thickness when folded: 8mm.
    Balancing: -
    Weight: 19g.
    Closure: Back Lock
    Clip: -
    Sheath: -
    Packaging: cardboard box with logos Spyderco
    Notes: -

    MBKP
    €73.77
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  35. Spyderco - Resilience - C142GP - knife

    Intended use: Sport

    Type of production: Industrial
    Production Lama: China
    Blade: 8Cr13MoV stainless steel
    Treatment Blade: -
    Handle: Stainless steel and G-10
    Blade length: 108mm.
    Blade thickness: 3mm.
    Closed Length: 133mm.
    Overall length: 238mm.
    Thick when closed: 16mm.
    Balancing: -
    Weight: 154g.
    Lock: Liner Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Packaging: cardboard box with logos Spyderco
    Notes: -

    C142GP
    €86.07
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  36. Spyderco - Endura Flat Ground - Black - C10FPBK - Knife

    Intended use: Sport

    Type of production: industrial
    Blade: stainless steel VG-10
    Treatment Lama: -
    Production Blade: Japan
    Handle: Gray FRN with stainless steel liners drowned
    Blade length: 95mm.
    Blade Thickness: 3mm.
    Closed Length: 125mm.
    Overall Length: 220mm.
    Thick when closed: 15.5mm.
    Balance: -
    Weight: 94g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: Sharpening Flat Grind

    C10FPBK
    €122.13
    Only 1 left
    Only 1 left
    Rating:
    89%
    4.5
  37. Spyderco - Caly 3.5 Carbon Fiber ZDP - C144CFPE - knife

    Intended Use: sports / tactical

    Type of production: industrial
    Production Blade: Japan
    Blade: Stainless steel with rolled edge in ZDP-189 to 67HRC and cheeks external 420J2
    Treatment Lama: -
    Handle: Carbon Fiber
    Blade length: 86mm.
    Blade Thickness: 3mm.
    Closed Length: 108mm.
    Total length: 194mm.
    Balance: -
    Weight: 88g.
    Closure: Back Lock
    Clips: stainless steel, removable and reversible
    Sheath: -
    Notes: -

    SC144CFPE
    €299.18
    Only 1 left
    Only 1 left
  38. Spyderco - Endura 4 Flat Ground - Gray - C10FPGY - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Gray FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Thickness when closed: 15.5mm.
    Balance: -
    Weight: 94g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: Full-Flat Grind

    C10FPGY
    €122.13
    Only 1 left
    Only 1 left
    Rating:
    80%
    4
  39. Spyderco - Ambitious - C148GP - knife

    Intended use: Sporting/EDC

    Production type: Industrial
    Blade production: China
    Blade: Stainless steel 8Cr13Mov
    Blade treatment: -
    Handle: G10
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: 90mm.
    Total length: 150mm.
    Thickness when closed: 11mm.
    Balance: -
    Weight: 86g.
    Closure: Liner Lock
    Clip: Stainless steel
    Sheath: -
    Packaging: Cardboard box with Spyderco logos
    Notes: -

    C148GP
    €67.21
    Only 1 left
    Only 1 left
    Rating:
    76%
    3.8
  40. Spyderco - Civilian knife - C12GS knife

    Intended use: tactical

    Type of production: industrial
    Blade production: Japan
    Blade: VG-10 stainless steel
    Blade treatment: -
    Handle: G-10 carrier with stainless steel right liner
    Blade length: 106mm.
    Blade thickness: 3mm.
    Closed length: 132mm.
    Total length: 234mm.
    Balancing: -
    Weight: 234g.
    Closure: Back Lock
    Clip: in stainless steel, reversible and removable
    Scabbard: -
    Note:

    C12GS
    €299.18
    Only 1 left
    Only 1 left
  41. Spyderco - Delica 4 SpyderEdge - C11SBK - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: Stainless steel VG-10 58HRC
    Blade treatment: -
    Blade production: Japan
    Handle: Black FRN with embedded stainless steel liners
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 180mm.
    Balance: -
    Weight: 72g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: -

    C11SBK
    €111.48
    Only 1 left
    Only 1 left
  42. Spyderco - Dragonfly 2 Black Plain - C28BK2 - knife

    Intended use: Sport

    Blade: stainless steel VG-10
    Handle: FRN - Fiberglass Reinforced Nylon
    Blade length: 57mm.
    Blade Thickness: 2.5mm.
    Closed Length: 84mm.
    Total length: 141mm.
    Balance: -
    Weight: 34g.
    Closure: Back Lock
    Clips: stainless
    Sheath: -
    Notes: -

    3663
    €94.26
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  43. Spyderco - Endura 4 Black Blade - C10PSBBK - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: Stainless steel VG-10 58HRC
    Blade treatment: titan black carbonitriding
    Blade production: Japan
    Handle: Black FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Thickness when closed: 15.5mm.
    Balance: -
    Weight: 106g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: -

    C10PSBBK
    €135.25
    Only 1 left
    Only 1 left
  44. Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Black FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Balance: -
    Weight: 104g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: -

    C10SBK
    €122.13
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  45. Spyderco - Endura 4 Wave knife - C10PGYW - knife

    Spyderco - Endura 4 Wave - C10PGYW - knife

    Intended use: Sport

    Type of production: industrial
    Blade: VG-10 stainless steel 58HRC
    Treatment Lama: -
    Blade Production: Japan
    Handle: dark blue liners with FNR drowned in stainless steel
    Blade length: 95mm.
    Blade Thickness: 3mm.
    Closed Length: 125mm.
    Overall Length: 220mm.
    Balance: -
    Weight: 104g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: Wave hook for easy opening patented by Emerson Knives originally developed for the U.S. Navy SEALs special units

    C10PGYW
    €135.25
    Only 1 left
    Only 1 left
    Rating:
    82%
    4.1
  46. Spyderco - Ladybug 3 - LBKS3 - knife

    Intended use: Sporting/EDC

    Production type: Industrial
    Blade production: Japan
    Blade: VG-10 stainless steel
    Blade treatment: -
    Handle: FRN
    Blade length: 49mm.
    Blade thickness: 2mm.
    Length closed: 62mm.
    Total length: 111mm.
    Thickness when closed: 8mm.
    Balance: -
    Weight: 14g.
    Closure: Back Lock
    Clip: -
    Sheath: -
    Packaging: cardboard case with Spyderco logos
    Notes: -

    LBKS3
    €59.84
    Only 1 left
    Only 1 left
    Rating:
    83%
    4.2
  47. Spyderco - Military Black Plain - C36GPBK - knife

    Intended Use: Sporting/Tactical

    Production type: Industrial
    Blade production: U.S.A.
    Blade: Stainless steel CPM 30SV
    Blade Treatment: BodyCote black
    Handle: G10
    Blade length: 102mm.
    Blade thickness: 3.3mm.
    Length closed 140mm.
    Total length: 241mm.
    Thickness when closed: 15mm.
    Balance: -
    Weight: 122g.
    Closure: Liner Lock
    Clip: Removable, stainless steel
    Sheath: -
    Packaging: cardboard box with Spyderco logos
    Notes: -

    C36GPBK
    €307.38
    Only 1 left
    Only 1 left
  48. Spyderco - Military Plain knife - C36GPE knife

    Intended use: Sport / Tactical

    Type of production: Industrial
    Blade Production: U.S.A.
    Blade: CPM 30SV stainless steel
    Blade treatment: -
    Handle: G10
    Blade length: 102mm.
    Blade thickness: 3.3mm.
    Closed length 140mm.
    Total length: 241mm.
    Closed thickness: 15mm.
    Balancing: -
    Weight: 122g.
    Closure: Liner Lock
    Clip: removable, in stainless steel
    Scabbard: -
    Packaging: cardboard box with Spyderco logos
    Note: -

    3720PS
    €290.98
    Only 1 left
    Only 1 left
Set Ascending Direction

Items 1-48 of 213

Page




ecommerce sicuro

  • Nitecore HC60 V2: La Torcia Frontale Rivoluzionaria - Recensione Completa | Parchetto del Tagliagole
    Nitecore HC60 V2: La Torcia Frontale Rivoluzionaria - Recensione Completa | Parchetto del Tagliagole

    Benvenuti al Parchetto del Tagliagole qui nel blog della Coltelleria Collini dove oggi vi presentiamo la Nitecore HC60 V2, una torcia frontale che sta ridefinendo gli standard di illuminazione outdoor.

    Con il suo design ergonomico e la sua straordinaria luminosità, questa torcia è una scelta eccellente per gli appassionati di avventure all'aria aperta.

    Dotata di un fascio luminoso grandangolare e di una batteria a lunga durata, la HC60 V2 è perfetta per escursioni notturne, campeggio e tutte le attività che richiedono una luce affidabile. In questa recensione dettagliata, esploriamo tutte le sue caratteristiche, dalla comodità d'uso alle sue modalità speciali, dimostrando perché sia un'ottima idea regalo per il Natale 2023.

    Seguiteci in questa avventura luminosa e scoprite perché la Nitecore HC60 V2 sta illuminando

    Read more »
  • Nuova serie di Coltelli Renkei: Eccellenza Italo-Giapponese | Coltelleria Collini
    Nuova serie di Coltelli Renkei: Eccellenza Italo-Giapponese | Coltelleria Collini

    La serie di coltelli Renkei, frutto dell'unione tra l'artigianato italiano e l'innovazione giapponese, offre una gamma di strumenti da cucina unici.

    Realizzati con l'acciaio giapponese VG10, noto per la sua resistenza e durabilità, i coltelli Renkei sono prodotti in Italia dalla famosa azienda Due Cigni con l'acciaio dalla Takefu Steel attraverso una tecnica di laminazione a 67 strati che combina tradizione e tecnologia moderna.

    Questo processo non solo garantisce un'affilatura duratura, ma anche un design elegante con motivi a onde sulla lama. La serie include il Santoku per sminuzzare, affettare e tritare, il coltello per arrosto e carni crude per tagli precisi, e il coltello utility/pane per affettare senza sforzo.

    Ogni coltello viene fornito in un elegante box nero con coprilama, riflettendo l'alta qualità

    Read more »