tactical flashlights
-
Nitecore - P20iX Rechargeable USB-C - 4000 Lumens and 221 meters - Tactical flashlight
WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Wide beam light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.
KEY FEATURES:
* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head.
* Rechargeable NITECORE 21700 battery (NL2150i, 5,000mAh) included in the package.
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide-range light with a central brightness of 12200cd. and a maximum range of 221 meters.
* Glasses and parabolas with anti-reflection treatments, crystal coating and with PDOT (Precision Digital Optics Technology).
* Frontal tungsten carbide glass breaker
* Integrated potentiometer with indicator light showing the remaining battery charge and voltage remaining.
* Constructed of solid aircraft aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. heightPower and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary
LEDs: 4 CREE XP-L2 V6 LEDs with a 50,000 hour life cycle
Operating Modes: 6, electronically controlled + Strobe
Powers and Times: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 12200 candles
Maximum Lighting Distance: 221m
Lighting method: Rear button with "Momentary On" system for light signals and Rear "Mode" button for immediate access to the strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2150i, 5,000mAh - included in the package). If necessary it can also work with 2x CR123 3.0V but stopping at 1060 lumens of power
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 116g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Scabbard: thermoplastic, rigid, belt-mounted
Impact resistance: resists falls from 1.5m heightNI-P20iX -
Nitecore - TSL10i - Rear button with signal LED for P10i, P20i and for i4000 - Accessory
WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.
HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.
FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72hLaboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery
COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.NI-TSL10i -
Nitecore - NPL20 Weapon Light 460 lumens and 76 metri - Torcia LED per gun
Led: 1x Cree XP-G3 S3 - with a life cycle of 50,000 ore
Modi Operativi: Ambidextrous pulsation for an easy access to the 3 luminous functions - Prize and one of the lateral pulsation for accessing the momentary tattic modality (Momentary-On), briefly award one of the pulsating for accessing the constant lighting modality (Costant-On) , premi three turn one of the pulsating for the Strobe modality (Strobe-On), using frequency strobe non-linear for effetti vertiginosi più forti.
Potenze e Durate: 460 lumens (0.3h) 40 lumens (3h45min) - Strobo 300 lumes
Picco di potenza: 1440 cd
Distanza di illuminazione massima: 76m.
Metodo di accensione: doppio interruttore, ambidextrous, posto ai lati della torcia
Metodo di variazione luminosa: doppio interruttore, ambidextrous, posto ai lati della torcia
Testa: aeronautical aluminum
Corpo: aeronautical aluminum
Finitura: anodized, Type III
Lens: ultra-transparent indurito vetro with anti-reflective treatment
Batterie: works with a CR123A battery (included in the package)
Misure: 6.4cm (Lunghezza) - 3.6cm (Larghezza) - 3.3cm (thickness, slitta included)
Weight: 89.6g. with inserita batteria
Accessori: o-ring
Waterproofing: comes standard IP67
Resistenza agli impatti: withstands expiry of 1m. say altezza
Note: Slitta di aggancio universale fast, compatible with Picatinny and Weaver systemsNI-NPL20 -
Nitecore - NPL10 - 240 lumens - Gun LED Flashlight
Availability: summer 2018
A series of pistol lanterns was added to the main list of previously presented devices. The company Nitecore presented new lanterns of a narrow sphere of use, but with great opportunities. The first model that was introduced is NPL10. The first lantern for the gun, with a universal mount, which is perfect for most pistols. The ultra light weight of the lantern will give the device an inconspicuous overall weight and will not heavily weight the gun, and is only 59.5 grams. Despite the small size of the lantern, the device is equipped with good protection from the penetration of dust and moisture, namely IP66.
Technical parameters
The work of the lantern for a gun is based primarily on the source of its light, since it is the most important part of the light that performs the stream. In equipping the flashlight, an American CREE XP-G2 S3 LED was laid, earlier this version of the LED was used on equipment of other lamps from various series of Nitecore company. The LED works together with a reflector and produces light with a maximum output of 240 lumens, and a light distance of 92 meters.
A good addition to the lantern, and a very useful device is a laser. The laser is installed in order to help the user to quickly determine the target at a distance while denoting it with a red dot. The maximum laser power has a wavelength of 635nm, which as a result will put the target at a great distance.
Since the flashlight has small overall dimensions to suit its own sphere of use, the battery on which it operates also has a small size, but also an optimal capacity. The work of NPL10 is based on the power supply CR2, with which the lamp working at maximum mode, will be able to work for about 30 minutes. In addition to the maximum mode, the phonar also shines in 4 more modes, and the total number of brightness levels is 5 modes.
The system for activating modes, has a fairly simple and at the same time practical activation, which will allow the user to quickly turn on the required mode during extreme conditions of its use.
Key features and innovations
Powered by CREE XP-G2 S3 LED
Maximum power 240 lumens with beam distance up to 92 meters
A laser with a wavelength of 635nm for a more accurate aiming
Works on a single CR2 power supply with a maximum duration of up to 30 minutes when the maximum brightness is illuminated
Made from lightweight and durable materials
Quick start
Easily and securely attached to most pistols
There are five modes available
Total weight 59.5g (with battery)
IP66 ProtectionNI-NPL10 -
Nitecore - MT06MD CRI - Penlight - 180 lumens e 58 metri - LED Flashlight
Utilizza un Led CRI a tonalità calda che permette all'occhio umano di riconoscere meglio i colori e le forme al buio; pensata soprattutto come torcia medica in modo da permettere al personale di effettuare diagnosi accurate. il Led CRI è fotobiologicamente sicuro, come da standard IEC/EN62471 ed elimina qualsiasi pericolo di luce azzurra emessa causa di danni fotochimici alla retina.
Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x AAA 1.2V 750mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare
LED: 1x Led Nichia 219B CRI - con un ciclo vitale di 50.000 ore
Modi Operativi: 2, regolati elettronicamente
Potenze e Durate: 180 Lumens (45min.) -> 45 Lumens (5.15h.) -> 4 Lumens (35h.)
Picco di potenza: 860 candele
Distanza di illuminazione massima: 58m.
Metodo di accensione: Pulsante posteriore - Si accende sempre alla minima potenza
Metodo di selezione luminosa: Pulsante posteriore
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso e sistema PDOT brevettato
Batterie: funziona con 2 batterie usa e getta o ricaricabili AAA da 1.2/1.5V (vendute separatamente)
Misure: 12.8cm (L) - 0.55cm (D fusto) - 1.4cm (D testa)
Peso: 22g. batterie escluse
Accessori: clip, o-ring di ricambio
Impermeabilità: come da standard IPX-8 - immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezzaNI-MT06MD -
Nitecore - P10iX USB-C Rechargeable Tactical Flashlight - 4000 Lumens and 158 meters - flashlight
WHY CHOOSE IT:
Tactical / military use - High luminous power - Very compact dimensions - Convenience of the integrated recharging system - Wide range light - Practicality and immediacy of the light selection commands. Thanks to Strobo Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.
KEY FEATURES:
* Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2150i, 5,000mAh) included in the package
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide range light with 6580cd central brightness. and maximum range of 158 meters
* Glasses and parables with anti-reflective, crystal coating and PDOT (Precision Digital Optics Technology) treatments
* Tungsten carbide front glass breaker
* Integrated potentiometer with light indicating the remaining charge and residual voltage of the battery
* Constructed from solid aircraft grade aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in heightPowers and durations certified in the laboratory by ANSI / NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - in different conditions of use or using different batteries, the data may vary
Led: 4 CREE XP-L2 V6 LEDs with a life cycle of 50,000 hours
Operating Modes: 6, electronically regulated + Strobo
Powers and Durations: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 6580 candles
Maximum illumination distance: 158m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear "Mode" button to immediately access the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: only works with a 21700 Nitecore "i series" rechargeable battery (NL2150i, 5,000mAh - included in the package). If necessary, it can also work with 2x 3.0V CR123, stopping at 1060 lumens of power
Measurements: 13.7cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 79.5g. batteries excluded
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip
Water resistance: as per IPX-8 standard, submersible up to 2m. depth for 30min.
Sheath: thermoplastic, rigid, for belt
Impact resistance: withstands drops from 1.5m in heightItalian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
NI-P10iX