Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Blade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catch

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.

The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.

The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details. 

The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.

Intended use: sports/hunting/utility

Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard case

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 pieces

Delightfully tactical - Alessandra De Santis/Hydra Design enchants knife enthusiasts around the world with the irresistible charm of the Boker Plus Kirke, inspired by the goddess of sorcery of the same name from Greek mythology. Despite its bewitching magic, the Italian knife designer stays true to its tactical line and keeps the pocket knife in a muted black color.

The ball-bearing-opening blade, made of Nitro-V steel with an austere black stonewash finish can be operated either in flipper or with the generous thumb opening, while the push-button lock ensures intuitive knife release.

Pronounced finger recesses, fine texture on the G10 handle grips and a thumb recess on the back of the blade ensure a secure grip at all times and a high level of safety at work, even in the most adverse conditions.

Intended Use: Sporting/Tactical

Type of production: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade treatment: stonwashed
Handle: G10
Blade length: 86mm.
Blade thickness: 3.8mm.
Total length: 201m.
Weight: 100g.
Clip: removable and reversible, stainless steel
Closure: Button Lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings - design by Alessandra De Santis

Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. 

The Expert Fire Folder has two rescue blades that open in opposite directions. While the spear point blade is suitable for universal cutting tasks, the rescue blade has several multifunctional cutting surfaces. It has a serrated edge for ropes and a lever point with integrated nail extractor. A belt cutter is located directly behind the tip. Finally, the multifunctional blade has a bottle opener for a well-deserved break after use. 

Intended Use: Emergency/Rescue

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: stainless steel and G10 folders
Blade length: 100mm.
Blade thickness: 3.2mm.
Total length: 235mm.
Weight: 315g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch 
Notes: tungsten carbide rear glass breaker - Second emergency lever lock blade with crowbar, belt cutter and bottle opener - Carson Flipper type opening system

Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. Both knives feature multiple cutting edges uncompromisingly designed to cut through ropes, harnesses and clothing of injured people.

This model, designed specifically for firefighters, features a universal spear point blade that can be opened with either the flipper or thumb pin system; there is also the multi-position clip in addition to the belt cutter that can be retracted inside the handle.

Intended Use: Emergency/Rescue

Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Teflon coated
Handle: stainless steel and G10 folders
Blade length: 116mm.
Blade thickness: 3.2mm.
Total length: 271mm.
Weight: 254g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch 
Notes: Rear tungsten carbide glass breaker - Rear removable belt cutter - Carson Flipper type opening system on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition

Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.

The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.

Intended Use: Sporting/EDC

Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivot

EDC is its home - the world is its home! Reliable, sturdy and biting, the Boker Plus Worldwide 2.0 is a two-handed opening tactical knife whose cosmopolitan features should make it legal to carry in many countries around the world. No blocking system, no quick one-handed opening, no worries: the solid 440C stainless steel drop point blade can be opened comfortably thanks to the generous claw, while the slipjoint system equipped with a powerful spring ensures total stability and safety in use.

The refined black stonewash finish of the blade perfectly matches the ergonomic olive green G10 handle grips adding a tactical touch. The folding knife is cosmopolitan thanks to the various carrying options offered by the lanyard hole and reversible clip. 

Intended Use: EDC

Production type: Industrial
Country of manufacture: China
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: made of G10, with stonewashed stainless steel inner folders
Blade length: 64mm.
Blade thickness: 2.8mm.
Total length: 155mm.
Weight: 87g.
Closure: SlipJoint
Clip: stonewashed stainless steel, removable and reversible
Sheath: - 
Packaging: cardboard box with Boker Plus logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC / Rescue

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane Sibert

Ultra-thin, incredibly lightweight and extremely durable, the 748BK-01 Narrows™ pushes the boundaries of EDC style and performance with a futuristic, minimalist design, high-quality materials and hi-tech engineering. The dark variant balances matte and glossy details with matte black DLC titanium grips mixed with a drop-point blade in glossy black M390 DLC. The 748BK-01 uses our AXIS® Torsion mechanism and thrust pads for extremely smooth blade activation. This precision EDC is beyond imagination.

Intended Use: Sporting / EDC

Production Type: Industrial
Country of manufacture: USA
Blade: M390 58/61HRC
Blade treatment: Dual Tone Black DLC
Handle: Titanium 6Al-4V
Blade Length: 87mm.
Blade thickness: 2.03mm.
Length closed: 117mm.
Total length: 203mm.
Thickness when closed: 7.1mm.
Weight: 68g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel with Sapphire Blue PVD treatment
Packaging: Cardboard box with Benchmade logos
Notes: -

Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip; the MAGNACUT drop point blade maximizes the cutting capacity and corrosion resistance of the steel. The VERSO Lock opening mechanism gives this knife maximum efficiency.  Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black PVD
Handle: anodized aluminum with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 123g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos 
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

Intended use: sports/steak

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel W1.4116
Blade treatment: satin finish
Handle: ebony
Blade length: 83mm.
Blade thickness: 2.5mm.
Closed length: 103mm.
Total length: 185mm.
Closed thickness: 17mm.
Weight: 88g.
Closure: Liner Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended use: Sports/Hunting

Type of production: Industrial
Blade production: Italy
Blade: 440 stainless steel
Blade Treatment: -
Handle: Olive wood with steel liners
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 220mm.
Closed thickness: 20mm.
Weight: 170g.
Closure: Back Lock
Clips: -
Sheath: in cordura
Packaging: cardboard box with Maserin logos
Note: On the back of the blade, a sharp skinner extends. This skinner, with its curved and sharp shape, is designed to separate the skin from the animal's body with extraordinary ease and precision. Whether it's a deer, bear or smaller prey, this tool proves to be a reliable companion for any hunter.

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously purchased and used. 
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

Discover Made in USA quality and functionality with the Bel Air. When you open the knife, its smoothness is unmatched thanks to KVT ball bearings and DuraLock technology.

As for cutting, the steel of the MagnaCut blade maintains an exceptional edge, and the "reverse tanto" blade can handle the toughest challenges during daily carry. The BlackWash finish hides scratches from use and complements the aluminum handle grips. The slim profile makes it perfect for easy carrying, thanks in part to the reversible pocket clip.

Intended Use: Sporty

Production type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 62/64HRC steel
Blade treatment: Blackwash
Handle: Aluminum 6061-T6
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 11mm.
Weight: 82g.
Opening: via ambidextrous pins, placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, Teflon-coated stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.

It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.

The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.

Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.

KNIFE RETIRED FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostages

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

Intended Use: Sporting

Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les George

The new Vulpis series from Fox Knives wants you to fall in love with Made in Maniago technology and manufacturing innovation with the new small and versatile multi-purpose.

Intended Use: EDC

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Black Idroglider
Handle: Brass
Blade length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 44g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.

In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.

The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.

Type of manufacture: industrial

Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: stainless steel and G10
Blade length: 85mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Weight: 127g.
Clip: Removable, stainless steel machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Kornel Kiss - ball bearing opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Lorien Arnold - flipper opening system on ball bearings

Intended Use: Sporting/collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening system

Loose screw? Far from it, because the Magnum Skruva (Swedish: screw) literally has a firm grip on everything. This is mainly due to the solid pivot screw, which forms the resting point for the ball-bearing 440A drop-point blade.

An attractive ricasso and discreet satin finish complete the visual appearance of the blade, while jimpings on the spine of the blade provide additional safety during tough cutting jobs.

The knife opens with the pinball machine; the liner lock closes the blade intuitively and reliably.

The handle is linear and ergonomic with non-slip cheeks made of light and textured G10, which guarantees an optimal grip even in the most adverse conditions.

Type of production: industrial

Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: G10
Blade length: 79mm.
Blade thickness: 2.7mm.
Closed length: 110mm.
Total length: 189mm.
Balancing: -
Weight: 100g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -

Type of production: industrial
Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: Micarta
Blade length: 88mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 201mm.
Balancing: -
Weight: 113g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -

Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.

The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.

Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: Sporting

Production Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpening: factory
* Marks on blade: none
* Marks on handle: none
* Box: in original Maserin cardboard
* Sheath: -
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and certified by our internal laboratory

Intended use: Tactical/Sports

Type of production: Industrial
Blade production: Italy
Blade: N690Co steel
Blade Treatment: -
Handle: Aluminum with Ebony insert
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 140mm.
Total length: 235mm.
Balancing: -
Weight: 166g.
Closure: Back Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratory

Intended use: Regional

Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available 
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos. 
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -

With an unmistakable and timeless design, Evoke Alox Limited Edition 2024 transcends trends. Subtle yet exceptional, it conveys strength and style. With its new Terra Marrone coloring, it allows you to reconnect with nature! With embossed and anodized aluminum cheeks, it's a really tough knife.

Intended Use: Sporty

Type of production: Industrial
Country of manufacture: Switzerland
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: Aluminum 
Blade length: 96mm.
Blade thickness: 2.8mm.
Length closed: 135mm.
Total length: 230mm.
Weight: 186g.
Locking system: back lock
Clip: stainless steel, removable
Packaging: cardboard box with Victorinox "Limited Edition" logos.
Notes: paracord lanyard - warranty certificate - limited edition for the year 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: overall in very good condition
* Commercially available handcrafted version no longer commercially available.
* Sharpening: factory sharpened, never resharpened
* Marks on blade: none
* Marks on handle: a few tiny little marks on carbon
* Box: present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Utility / Collection

Production type: MidTech
Country of Manufacture: USA (Wampum, Pennsylvania)
Blade: CPM-CruWear 63/64HRC steel
Blade treatment: Stonewashed
Handle: 5mm thick Carbon Fiber with stainless steel top folder
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 220mm.
Weight: 174g.
Closure: Shark-Lock
Clip: stainless steel
Packaging: cardboard box with Demko logos
Notes: previously purchased knife from private collection - rare semi-crafted version (MidTech) personally made by the knife maker in his own workshops in Wampum, discontinued and no longer commercially available

In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.

Intended Use: EDC

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium 
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collection

What began as an attempt to perfect the multi-purpose outdoor lock, has evolved into a practical solution for everyday tasks and chores: the 533SL-07 Mini Bugout is exactly the compact EDC built for everyday carry in style.

Lightweight, slim and sleek, yet incredibly rugged and durable for its size, the 533SL-07 Mini Bugout is a seasonal variant that immediately catches the eye, with an easy-care premium CPM-S30V steel blade, Cerakote Crushed Silver finish and Sage Green outdoor-inspired Grivory-colored grip, with gold-anodized backspacer and thumb stud for a distinctive Benchmade color touch.

Intended Use: Sporty / EDC

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Crushed Silver Cerakote
Handle: Grivory
Blade length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

In the years since the 535 Bugout was launched, this slim, lightweight and durable folder has redefined EDC style and versatility, from the trail to the workplace and amidst all of life's adventures.

The 535-12 Bugout is an instant eye-catcher, made of easy-care premium CPM-S30V stainless steel with a stonewashed finish and powder-colored Grivory handle with backspacer and gold anodized thumb stud for a touch of color and class-the must-have tool in your outdoor kit.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.

The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.

Welcome to the next chapter of the Zero Legacy!

Intended Use: Sporting

Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens Anso

In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.

The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.

Intended Use: Tactical/Sportsman

Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: black coating
Handle: stainless steel and G10
Blade length: 90mm.
Blade thickness: 3.1mm.
Total length: 212mm.
Weight: 120g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: design by Lucas Burnley - flipper opening system on ball bearings

The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael Burch

The Jupiter folder represents the culmination of the evolution of the locking system already used on the well-known Radius and Saturn, compared to which it gains a new safety lock that allows the blade to inhibit rotation in both the open and closed positions.

The design takes up the salient features of the two previous models, managing to integrate even better the round element that houses the mechanics. The blade, devoted to maximum practicality, makes the Jupiter the ideal companion in both urban and woodland environments: the tip is sturdy, while the cutting edge has a smooth, steady curvature that is fully usable and easily resharpened.

The handle shines in ergonomics, featuring a wide recess for the index finger and generous space for the other fingers.

Intended Use: Sporting/Collection

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel M390 59/61 HRC
Blade treatment: Acid Stonewash
Handle: sandblasted titanium with "Jungle Wear" green carbon fiber inserts
Blade length: 78mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 195mm.
Weight: 148g.
Closure: Fingers Safe Opening System
Clip: Titanium, machined from billet
Packaging: cardboard box, drawer-style, with Fox Knives logos - leather sheath, hydroformed, belt
Notes: Design by Denis Simonutti

Take it seriously: the Sumo is no joke! This oversized knife is the ultimate in practicality: it's easy to use, opens smoothly and offers an ambidextrous locking system that's easily operated with a simple, reliable pivot, and it's also particularly aesthetically appealing and packed with colorful details and accents.

The red ceramic-treated inner folders give an attention-grabbing pop, while the layered G10 offers great grip and plenty of hand room!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Darkwashed
Handle: made of layered G10, with liners and spacers made of red ceramic-treated steel
Blade length: 98mm.
Blade thickness: 3.3mm.
Length closed: 130mm.
Total length: 225mm.
Weight: 145g.
Closure: Pivot Lock (Axis Lock)
Clip: removable and reversible in painted stainless steel
Packaging: cardboard box with Gerber logos
Notes: -

The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.

Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard box

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances.  The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."

The handle uses the brand new UltreX SureTouch composite in modified G-10.

SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant is available in 4 versions with two different types of steel, both provided by Böhler, an Austrian company with which Extrema Ratio has been collaborating for over 20 years, using its highly esteemed materials for the production of its blades.

For the Stone Washed M390 version, Extrema Ratio uses Böhler M390 steel, thermally treated to 61 HRC, which, thanks to a powder metallurgy production process, ensures cutting effectiveness, wear resistance, and oxidation resistance over time.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel M390 61HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy Lee

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049