torches

TECHNICAL SPECIFICATIONS:

Led: 1x Luminus SST40 with a life cycle of 50,000 hours
Operating Modes: 4 light modes and 2 special modes, all electronically regulated
Powers and Durations: 2000 Lumens (45min.) -> 350 Lumens (6.30h) -> 50 Lumens (24h) -> 5 Lumens (200h) -> Beacon -> S.O.S.
Peak power: 15850 candles
Maximum lighting distance: 250m.
Lighting Method: Rear Button
Lighting selection method: Rear Button
Head: aircraft aluminum
Body: Plastic Material
Finish: Anodized, Type III
Lens: Polymeric
Batteries: (built-in, not removable): 1x 21700 3.6V 5000mAh
Measurements: 11.7cm (L) - 3.0cm (D shaft) - 3.0cm (D head) - 2.74cm (D tang)
Weight: 140g.
Accessories: USB-C to USB-C charging cable, wrist strap
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height

Actual power and durability, lab-certified by ANSI/PLATO FL1-2019 standard

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

KEY FEATURES

* It uses two main LEDs 1XCREE XP-G3 S3 (3000K) Spotlight (from depth) and 1xCREE XP-G3 S3 (5700K) Floodlight (ambient), usable individually or combined and two small central auxiliary red light LEDs.

Maximum output power 520 lumens with depth about 103 meters
* Polymer torch body
* The torch consists of a double parabola (front) which guarantees a double possibility of illumination;

Parabola CREE XP-G3 S3 (3000K) Spotlight with 3 levels: 520 lumnes - 400 lumens (6 hours) - 100 lumens (10 hours)
CREE XP-G3 S3 dish (5700K) Floodlight with 2 levels: 200 lumens (8 hours) - 55 lumens (13 hours)

Central red LEDs: 16 lumens (6 hours)

* Maximum light intensity of 4120 cd and maximum range of 128 meters
* Powered by both USB-C Nitecore HLB1300 Rechargeable Li-ion Battery (included), and 3 AAA batteries
* Double button on, off and adjustment
* Wide 90 ° lighting angle, specially designed for hiking and sporting activities
* Elastic front band included, light and breathable
* Electronic protection against battery polarity inversion
* Made of ABS
* Submersible as per IP66 specifications
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

Battery (included): Nitecore HLB1300 Rechargeable Li-ion Battery USB-C rechargeable battery
Torch dimensions: 54.9x398.6x28.3mm.
Weight: 82.5g (flashlight only, without batteries, headband and holder for front use)
Lens: micro-blasted hardened glass
Body: ABS
Notes: water resistant as per IP66 standard.
NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

KEY FEATURES:

* 11 modes available with 5 light sources
* Possibility of continuous light or flashes in 5 different colors
* Built-in lithium-ion battery with a maximum autonomy of 50 hours
* Rechargeable with built-in USB-C port
* One-handed operation of the torch, via a single button
* An indicator light in the flashlight indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight bracket, with Velcro hooks on the back
* Made of sturdy and quality plastic materials
* Extremely lightweight and pocket-sized design
* Withstands impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 5x high power LEDs, white, red, blue, yellow, green, with a life cycle of 50,000 hours
Operating Modes: 5 colored flashes and a special mode (police warning with blue / red light)
Powers and Durations: Red 3 lumen 50 hr - Green 8 lumen 50 hr - Yellow 9 lumen 50 hr - White 15 lumen 40 hr - Blue 2 lumen 40 hr - Red / Blue 40 hr

Power on and selection method: Central button for power on, off and light selection
Body: thermoplastic materials
Battery: integrated, not removable, 300mAh Li-Ion, rechargeable via MicroUSB-C plug
Torch measurements with bracket: 61.8mm (Length) - 28.9mm (Width) - 21.7mm (Thick.)
Torch weight: 24.5g.
Weight with bracket: 35.5g.
Accessories: support bracket with hooks for the front and rear velcro - USB charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m in height
Note: -

Real powers and durations, certified in the laboratory by ANSI / NEMA FL1 standards

NU series product specially designed for law enforcement.
The NITECORE NU07 LE is a USB-C rechargeable mini sign light with 11 modes and 5 light sources with constant lighting or flashing red, green, yellow,
white / blue and red / blue police alarm.

The completely transparent shell makes the signals identifiable in all directions.

The flashing colors can indicate different groupings or allow for quick identification of team members in specific positions.

Thanks to the ARC adapter it can be attached to the helmet for special operations with quick and secure attachment.

Thanks to the innovative design of the rear clip, it can be easily attached to the standard MOLLE system.

The hook and loop attachment on the back of the bracket ensures a firm and secure fit.
The slots located on both sides of the bracket allow you to strengthen the attachment by fixing the helmet cable or the elastic to prevent accidental loss.

The single button interface is easy to use with a built-in 300mAh rechargeable lithium-ion battery allowing for up to 50 hours of runtime.

The waterproof design makes it IP66 rated.

The body is constructed of solid and durable PC materials with an ultra-light and compact design.

Utilizza un Led CRI a tonalità calda che permette all'occhio umano di riconoscere meglio i colori e le forme al buio; pensata soprattutto come torcia medica in modo da permettere al personale di effettuare diagnosi accurate. il Led CRI è fotobiologicamente sicuro, come da standard IEC/EN62471 ed elimina qualsiasi pericolo di luce azzurra emessa causa di danni fotochimici alla retina.

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x AAA 1.2V 750mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

LED: 1x Led Nichia 219B CRI - con un ciclo vitale di 50.000 ore 
Modi Operativi: 2, regolati elettronicamente
Potenze e Durate: 180 Lumens (45min.) -> 45 Lumens (5.15h.) -> 4 Lumens (35h.)
Picco di potenza: 860 candele
Distanza di illuminazione massima: 58m.
Metodo di accensione: Pulsante posteriore - Si accende sempre alla minima potenza
Metodo di selezione luminosa: Pulsante posteriore
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso e sistema PDOT brevettato
Batterie: funziona con 2 batterie usa e getta o ricaricabili AAA da 1.2/1.5V (vendute separatamente)
Misure: 12.8cm (L) - 0.55cm (D fusto) - 1.4cm (D testa)
Peso: 22g. batterie escluse
Accessori: clip, o-ring di ricambio
Impermeabilità: come da standard IPX-8 - immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezza