Year 2012

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

Intended use: Emergency and survival multi-purpose knife

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: anticorodal anodized aluminum
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length 8 cm) - window breaker - 2013 model now out of production

Intended use: Tactical

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel 58HRC N690Co
Handle: Titanium
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 145mm.
Overall length: 247mm.
Thick when closed: 18mm.
Balancing: -
Weight: 186g.
Closure: Frame Lock
Clips: stainless steel
Sheath: -
Packaging: cardboard box with Fox logos and with Cordura sheath
Notes: -

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

Intended use: Sport / Tactical

Type of production: Industrial
Production: Italy
Blade: Stainless D2
Blade treatment: -
Handle: Anodized aluminum
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 16mm.
Balancing: -
Weight: 108g.
Closing: TOL - Tactical Operation Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Lion Steel
Notes: Design by Max

Beretta K92 bullet knife

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel AUS-8
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 4mm.
Closed Length 125mm.
Overall length: 220mm.
Thick when closed: 14mm.
Balancing: -
Weight: 50g.
Lock: back lock
Clip: -
Sheath: -
Packaging: cardboard box with Beretta logos
Notes: -

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel, three-layer laminate (VG2 and CoS to 60 HRC)
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length 111mm.
Total length: 197mm.
Thick when closed: 24mm.
Balance: -
Weight: 170g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Fallkniven
Notes: -

EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless CPMS30W
Treatment Blade: -
Handle material: carbon fiber
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Overall length: 178mm.
Thickness when folded: 7mm.
Balancing: -
Weight: 102g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Collini Cutlery is the distributor for Italy Enzo knives

Purpose: Tactical / Sports

Type of production: Semi-Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S35VN
Blade Treatment: Tungsten DLC PVD Flat Black
Handle: Titanium and G10
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 149g.
Blocking System: Frame Lock with Lock Bar Stabilizer system by Rick Hinderer
Clip: Stainless Steel
Package : carton box with Spartan Blades logos
Notes: : Design by Iovito / Carey

BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife

The brand BlackHawk ! Blades was born after the recent acquisition of MOD / Master of Defense by BlackHawk ! - American company leader in tactical gear. The new products keep high quality standards to which MOD we had become accustomed and speak directly to the police and martial artists in fighting techniques with a knife.

Intended Use: Tactical

Type of production : industrial
Blade: AUS-8 stainless steel
Treatment Blade: Teflon
Production Blade: Taiwan
Handle material: 1.5mm stainless steel liners , Cheeks G-10
Blade length : 90mm .
Blade Thickness: 3mm.
Length closed: 119mm .
Total length : 200mm .
Balance: -
Weight: 184g .
Lock: Liner Lock
Clip: Removable , multi-position stainless steel TiNi
Sheath: -
Notes: knife designed by Kelly McCann (aka Jim Grover ), founder of Crucible Security , one of the most important agencies of security services

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8A
Trattamento Lama: Satinatura
Manicatura: G-10
Lunghezza lama: 89mm.
Spessore lama: 4mm.
Lunghezza chiuso: 134mm.
Lunghezza totale: 216mm.
Peso: 156g.
Chiusura: Tri-Ad Lock
Clip: Reversibile e amovibile, in acciaio inox
Confezione: scatola in cartone con loghi Cold Steel
Note: Modello fuori produzione, unico esemplare a nostra disposizione

Cold Steel - Hold Out II - 11HL knife

Intended use: Sport

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel AUS-8A
Treatment Lama: -
Handle: G-10
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 130mm.
Total length: 223mm.
Thick when closed: 9mm.
Balance: -
Weight: 118g.
Clasp: Tri-Ad Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Cold Steel
Notes: -

Destinazione d'uso: Sportivo / Tattico

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox CTS-XHP
Trattamento Lama: Teflonatura
Manicatura: G-10
Lunghezza lama: 101mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 136mm.
Lunghezza totale: 238mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 150g.
Chiusura: Tri-Ad Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola di cartone con loghi Cold Steel
Note: -

Zuava Cattle Polished R-ZVC16 - knife

Craft knife regional product in Scarborough, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all work

Handle: polished horn cattle
Blade: Stainless 440A
Total length: 16 cm
Blade Length: 7,5 cm

Intended Use: Sport / Collection

Type of production: Semi Artisan
Production Blade: France
Blade: Stainless steel 12C27
Treatment Lama: -
Handle: Boxwood
Blade length: 95mm.
Blade thickness: 2mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: -
Balance: -
Weight: 44g.
Closure: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard Box
Notes: -

Intended Use: Sport / Collection

Type of production: Semi Artisan
Production Blade: France
Blade: Stainless steel 12C27
Treatment Lama: -
Handle: Walnut
Blade length: 95mm.
Blade thickness: 2mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: -
Balance: -
Weight: 44g.
Closure: Virobloc
Clip: -
Sheath: -
Packaging: Cardboard Box
Notes: -

Destinazione d'uso: Collezione, sportivo

Lama: in acciaio al carbonio 1065
Produzione Lama Francia
Manicatura: acciaio inox
Lunghezza lama: 90mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 66g.
Chiusura: -
Clip: -
Fodero:
Note: -

DPX Gear - H.E.S.T. Folder D2 - knife

Intended Use: Sport / Tactical

Type of production: Semi-Industrial
Production Blade: Italy
Blade: D2 60/61HRC
Treatment Blade: Milspec Black Coated
Handle: Titanium and G10
Blade length: 75mm.
Blade thickness: 5mm.
Total length: 195mm.
Thick when closed: 14mm.
Balance: -
Weight: 138g.
Closure: Frame Lock with security system Rotoblock
Clip: removable and reversible, stainless steel
Sheath: -
Packaging: wooden box with logos DPX GEAR
Notes: supplied key purpose for removal and adjustment

Piccolo gioiello realizzato dalla nota casa tedesca di coltelli militari Eckhorn - La particolare e precisa lavorazione di cesellatura fatta sulla manicatura in acciaio inox del coltello, produce gradevoli effetti di luce, rendendo lo stesso un bellissimo oggetto da impugnare e collezionare.

- Lama in acciaio 440 di cm 5
- Lunghezza totale cm 14,5
- Peso 80 grammi
- Confezione regalo

Intended Use: Hunting/Sporting

Production type: Industrial
Country of Production: Finland
Blade: D2 steel
Blade finish: Satin finish
Handle: birch briar
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 102g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpening

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: CPM-S30V 61-62HRC 
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY

Intended Use: Tactical / Sports

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 15mm.
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Destinazione d'uso: Collezione/Gentleman

Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: In acciaio inox Cowry-Y
Trattamento Lama: -
Manicatura: Madreperla e acciaio inox 316
Lunghezza lama: 60mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 81mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: Inserti in madreperla sul dorso del coltello - modello interamente realizzato a mano dal Maestro Koji Hara

Maserin - Sturm - 668 - Knife

Intended Use: Utility / CQD / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Teflon coated
Handle: -
Blade length: 93mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Total length: 225mm.
Thick when closed: 17mm.
Balance: -
Weight: 225g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon and rubber, made in Italy, by radar
Packaging: Cardboard box with logos Maserin
Notes: Kit utility to engage in the tang of the knife with wood saw, screwdriver, bottle opener and can opener

Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.

Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes

Microtech - SF M / A Stone Washed - knife

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design