Year 2022
-
Boker Plus - Kalashnikov AK101 2.0 Flipper - 01KAL105N - folding knife
ntended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Teflon coated
Handle: Aluminium
Blade length: 120mm.
Blade thickness: 3.5mm.
Total length: 250mm.
Weight: 202g.
Clip: Stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Kalashnikov logos
Notes: -BO-01KAL105N -
Boker - Sherman EDC knife 110665 - collection knife
The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.
For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.
The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.
A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.
Intended use: Collection
Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray boxBO-110665 -
ExtremaRatio - K1 Dobermann knife - XXV Anniversary - Limited Edition
This special edition in 250 pieces, proposed on the occasion of the 25th anniversary of the brand, maintains the shape of the original, but with materials and finishes corresponding to the current production.
The K1 is equipped with a modified spear point profile blade, characterized by a tip that combines the 40° "tanto" profile with the more traditional European one, creating a sharp but very solid hybrid which, with the false false edge, makes it particularly effective in jab. The bevel is high, allowing for a very effective cutting angle.
The blade is immediately recognizable by the fenestration at the heel, which allows for considerable lightening without compromising its strength. It is made of Böhler N690 steel, with heat treatments that bring its hardness to 58 HRC for the best combination of edge hold and resistance. The finish is satin with flat grinding.
The handle, in anodized Anticorodal alloy, compared to the original presents the lightening on the sides that make the Extrema Ratio knives immediately distinguishable, but maintains the arched shape and the lateral "bellies" of the K1, offering an excellent grip both in the "saber" than in the "reverse" grip.
The terminal part of the handle curves to form a sort of hook which allows particularly easy and rapid extraction from the scabbard, while the tang protrudes from it with a triangular cusp which acts as a glass breaker with a slot which allows the knife to be equipped of lasso.
The leather scabbard faithfully reproduces the original while maintaining both the qualities of ease and speed of extraction. The carry can take place in an upside-down axillary position, horizontally on the belt or tactically on the thigh.
The K1 equipment is completed with a polypropylene case , complete leather sheath and underarm shoulder strap.
WEIGHT g.: 493
WEIGHT OZ.: 17.39
BLADE LENGTH (MM): 210
BLADE LENGTH (IN): 8.26
TOTAL LENGTH (MM): 351
TOTAL LENGTH (IN): 13.81
BLADE THICKNESS (MM): 6.3
BLADE THICKNESS (IN): 0.25
BLADE MATERIAL: BÖHLER N690 STEEL (58HRC)
BLADE FINISH: SATIN
BLADE GRINDING: FLAT EDGE
HANDLE MATERIAL: ANODIZED ANTICORODAL ALUMINUMER-K1-D-LE -
Boker Plus - Urban Texas Tooth Pick Flipper - 01BO388 - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel VG10
Blade treatment: satin finish
Handle: G10
Blade length: 84mm.
Blade thickness: 2.5mm.
Total length: 191mm.
Weight: 43g.
Clip: stainless steel, machined from solid, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -BO-01BO388 -
Boker Plus - Nubilum Flipper Knife - 01BO492 - Carbon Fiber - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 91mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 132g.
Clip: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -BO-01BO492 -
Cold Steel - Engage Knife - 2.5" Clip Point Atlas Lock - FL-25DPLC - knife
Intended Use: Sporting / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Stonewashed
Handle: GFN (nylon and fiberglass)
Blade length: 63mm.
Blade thickness: 2.5mm.
Total length: 152mm.
Weight: 62g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS-FL-25DPLC -
ExtremaRatio - S-Thil Black Warfare knife - XXV Anniversary Special Edition - knife
Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.
The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.
The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.
The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversaryER-STHIL-BWLE -
BlackFox - Argus by Grigorii Matveev - Black G10 - BF-760 - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760 -
BlackFox - Feresa by Grigorii Matveev - Black - BF-762BB - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-762BB -
Viper - Lille 1 Fixed Knife by Vox - Elmax Carbon Fiber - VT4022FC - knife
Intended Use: Sporting / Hunting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4022FC -
Fox - Chilin by Vox - FX-530G10B - N690Co and Black G10 - knife
Intended use: sporting/collection
Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade finish: Stone Washed
Handle: G10
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 110g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper VoxnaesFX-530G10B -
Fox - Chilin by Vox - FX-530CF - M398 and Carbon Fiber - knife
Intended use: sports/collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M398 61HRC
Blade finish: Satin
Handle: HDL carbon fiber
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 106g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper VoxnaesFX-530CF -
BlackFox - Vesuvius knife Black - D2 - by Alfredo Doricchi - BF-710 - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: Kydex, with Tek-Lok attachment
Packaging: cardboard box with BlackFox logos
Notes: Fire starter included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-710D2 -
Boker - Bronco bushcraft knife - BO121504 - knife
When Boker designed this Boker BRONCO fixed outdoor knife, it set ambitious goals;
- Universal and optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, hikers, hunters, SAR teams and others. - A CPM steel blade, a handle that fits comfortably in your hand even when working for long periods of time. A quality leather sheath that can be worn with or without a pendant. 100% production in Solingen / Germany
- The CPM-3V was developed by Crucible Industries LLC - a world leader in the 62-63 HRC sintered metallurgical steel market.
The universal wide point blade with high saber sharpening has always been the hunter's favorite shape for both large and small game and is suitable for both precision and heavier tasks. The tang is continuous and protrudes a few millimeters from the end of the handle. This ensures maximum stability and the tang can withstand even powerful blows with a log or other object.
TPE - thermoplastic elastomer - was chosen as the material of the handle, which completely encloses the tang and has a structure that guarantees a good grip in any load direction. TPE is strong, elastic, non-slip and has low thermal conductivity.
The knife features a leather sheath featuring a 9.3cm metal firelighter from market leader Light My Fire, which fits into a large, snug leather ring firmly integrated into the piping.
These features make the BRONCO Boker a tool for survival in an environment also of wild nature, compact, versatile and complete, at the height of any situation.
Intended use: UtilityType of production: Industrial
Country of production: Germany - Solingen
Blade: CPM 3V 62 / 63HRC ful tang
Blade finish: Satin
Handle: TPE
Blade length: 113mm.
Blade thickness: 3.4mm.
Total length: 230mm.
Weight: 147g.
Sheath: in leather, with flintlock
Packaging: cardboard box with Boker logos
Note:BO121504 -
Fox - Core knife by Vox - FX-604CF - Elmax - Carbon Fiber - knife
Intended use: sports / collection
Type of production: Industrial
Country of production: Italy
Blade: Elmax 59 / 60HRC stainless steel
Blade finish: PVD
Handle: HDL carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Closing mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper type opening on ball bearings - Design by Jesper VoxnaesFX-604CF -
Maserin - Sessantesimo - FatCarbon & Gold HNCF - 195/SUPERTiN - knife
Intended use: sharpener/sportsman
Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -MA-195/TiN -
Maserin - Sessantesimo - FatCarbon & Blue HNCF - 195/AlTiN - knife
Intended use: sharpener/sportsman
Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -MA-195/AlTiN -
MKM - Hero by Tommaso Rumici - M390, Titanium and G10 Black - MK-HR-GTBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GTBK -
MaglioNero - Iside Line - 6-piece steak set - SET0712IS - kitchen knife
The Fratelli Rizzi company was founded at the end of the 19th century in Premana, a small Italian mountain town located between Valtellina and Valsassina. Flexible and competitive company which, combining the typical characteristics of craftsmanship with the continuous search for new technologies, is synonymous with quality in the production of professional cutlery for cutting.
In 2012, after about 50 years of experience in the cutlery sector, the Fratelli Rizzi company decided to offer its own lines of professional cutlery under the name of MaglioNero, combining it with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
6-piece set of table knives
Recommended use: meat, pizza
Country of production: Premana, Italy
Cutting steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 120mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasherNOTES: wooden box
MN-SET0712IS -
MaglioNero - Iside Line - paring knife 10cm - IS0510 - kitchen knife
The Fratelli Rizzi company was founded at the end of the 19th century in Premana, a small Italian mountain town located between Valtellina and Valsassina. Flexible and competitive company which, combining the typical characteristics of craftsmanship with the continuous search for new technologies, is synonymous with quality in the production of professional cutlery for cutting.
In 2012, after about 50 years of experience in the cutlery sector, the Fratelli Rizzi company decided to offer its own lines of professional cutlery under the name of MaglioNero, combining it with numerous collaborations with the best Italian and European operators in the field of professional cutlery.
Recommended use: meat, vegetablesCountry of production: Premana, Italy
Cutting steel: Nitro-B stainless steel with a hardness of 57HRC
Blade finish: satin
Blade length: 100mm.
Construction: full tang with riveted handle
Handle: black POM
Maintenance: manual washing recommended; suitable for occasional washing in the dishwasherNOTE: packed in plastic bag, box shown in photo not included
MN-IS0510 -
Boker Plus - Koteyka Slipjoint by Alexander Krava - 01BO641- folding knife
Intended Use: Gentleman / EDC / Sporty
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: G10
Blade length: 66mm.
Blade thickness: 2.7mm.
Length when closed: 92mm.
Total length: 158mm.
Weight: 49g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: Design by Alexander KravaBO-01BO641 -
MKM & Mercury - Makro 2 Knife Sheepsfoot By Vox - Black G10 - MK-MA02-GBK - Sporting Knife
Intended use: Neck Knife / Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 77g.
Scabbard: Black leather sheath, for neck, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-GBK -
Cold Steel - Engage 3.5" Clip Point - S35VN Atlas Lock - FL-35DPLC - knife
Designed as an everyday companion for heavy-duty use, Engage is an easy-to-carry knife with a wide 3.5-inch S35VN stainless steel blade for superior strength and edge retention. Featuring Cold Steel's Atlas™ lock that provides a consistent, durable and reliable lock; fully ambidextrous and able to handle any task. The easy-to-grip G-10 handle is built to be durable, and the satin-finished clip blade allows for precise and effective cutting.
Intended Use: Sporting/Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S35VN
Blade Finish: Satin finish
Handle: G-10
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 221mm.
Weight: 187g.
Closure: Atlas Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CSFL35DPLC -
MKM & Mercury - Makro 1 knife Drop by Vox - Black G10 - MK MA01-GBK - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-GBK -
Coltelleria Collini - Set of 4 Sushi and Sashimi Kai Wasabi series kitchen knives - stone 3000 - Wusthof bag
Are you looking for an essential kit of knives for making sushi and sashimi that is great for professional use or perfect for cooking enthusiasts?
The Collini Cutlery offers you this set consisting of;
Four knives made in Japan by the Kai Wasabi series:
Kai Deba 16cm - in Japan this knife is used as a cleaver; stable and heavy, it has a solid and wide blade, with asymmetrical sharpening. The front of the blade is mainly used for filleting fish, while the back of the blade is more robust and is also used for dissecting poultry and small bones
Kai Deba 10.5cm - with asymmetrical sharpening suitable for small precision work on fish and vegetables
Kai Fillet 18cm - flexible knife perfect for filleting Western fish
kai Yanagiba from 24cm - with asymmetrical sharpening perfect for processing fish, especially Sushi and Sashimi and cutting meat.Kai 3000 grit sharpening stone - great for edge grinding
Wusthof 12 places knife bag
4 Blade cover and wire protector in polymers with fabric insert
We remind you that to make this set more exclusive you can choose the laser customization of the blades during the purchase
set-sus5 -
Coltelleria Collini - Set of 4 professional kitchen knives Kai Wasabi series - sharpener and Wusthof bag
Are you looking for an essential knife kit that is great for professional use or perfect for kitchen enthusiasts?
The Collini Cutlery offers you this set consisting of;
Four knives made in Japan by Kai:
Kai Chef 20 cm - multipurpose knife for both meat and vegetable cutting
Kai Carne 23 cm - specific knife for cutting raw or cooked meats
Kai Fillet 18cm - flexible knife perfect for filleting fish
kai Utility 10 cm - multipurpose knife ideal for cutting vegetables and fruitSharpening sharpener 26 cm produced by the German Wusthof
Wusthof 12 places knife bag
4 Blade cover and wire protector in polymers with fabric insert
We remind you that to make this set more exclusive you can choose the laser customization of the blades during the purchase
set-cuc5 -
Benchmade - Redoubt CPM-D2 - 430BK - knife
Intended Use: Utility / Hiking / Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-D2 steel 60/62HRC
Blade Finish: Cobalt Black
Handle: Grivory
Blade Length: 90mm.
Blade thickness: 3.2mm.
Length closed: 120mm.
Total length: 211mm.
Handle thickness: 16mm.
Weight: 105g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storageBM-430BK -
Benchmade - Mini Bugout 533-3 - S90V Carbon Fiber Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V 59/61HRC
Blade finish: Satin finish
Handle: Carbon fiber with anodized aluminum spacer
Blade length: 71mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.2mm.
Weight: 46g.
Closure: AxisLock
Clip: Removable and reversible, PVD stainless steel, Deep Carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533-3 -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758 -
Viper - Orso 2 by Jens Anso - Dark Stonewashed Titanium - V5997TI - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5997TI -
Fox - Saturn by D. Simonutti - Acid Stonewashed Aluminum - FX-551ALG - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Acid Stonewashed
Handle: Anodized Aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALG -
Fox - Saturn by D. Simonutti - Black Aluminum - FX-551ALB - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade treatment: Idroglider Blackwashed
Handle: Anodized aluminum
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALB -
Fox - Saturn by D. Simonutti - Satin Titanium - FX-551Ti - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade treatment: Satin finish
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551Ti -
Cold Steel - Razor Tek 6.5" - Black GFN - FX-65RZR - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -CSFX-65RZR -
ExtremaRatio - K-Talon Karambit - N690 Dark Stone Washed - Knife
The K-Talon is a karambit with a particularly thin full tang structure that, including sheath and grips, reaches a thickness of only 10 mm. The curved, hooked blade is designed inspired by the shape of a claw. It is designed to achieve precise, deep cuts while simultaneously hooking, trapping and/or ripping.
The back ring is designed to achieve a strong and secure grip in all conditions preventing the knife from sliding back and making it exceptionally difficult to disarm or turn against the user.
The very thin Kydex sheath has a quick release and comes with paracord that allows it to be used as a neck knife or attached to MOLLE-system platforms.
Intended use: tactical
Type of production: industrial
Country of production: Italy
Blade: full tang, stainless steel N690Co 58/60HRC
Blade finish: Dark Stone Washed
Handle: anodized anticorodal aluminum
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 175mm.
Weight: 130g.
Sheath: Kydex
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with multi-position, M.O.L.L.E.-compatible attachment systems.ER-KTAL-DS -
Boker Plus - Urban Trapper Premium Carbon Fiber by Brad Zinker - 01BO613 - folding knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel M390
Blade treatment: stonewashed
Handle: titanium and carbon fiber
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Closure: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening systemBO-01BO613 -
Cold Steel - Air Lite Tanto - CS26WT - Black G10 - folding knife
We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.
What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.
Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!
Intended Use: Sporty / EDCProduction type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS26WT -
Benchmade - Meatcrafter - Orange Blade and Carbon Fiber - 15500OR-2 - knife
When your adventures in the field transition to the kitchen, the right cutting tool can make all the difference!
The new Meatcrafter™️️ is a hybrid hunting fixed blade with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-S45VN stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most challenging barbecues!
Intended Use: Hunting / Fishing / Sporting / Meat KnifeProduction type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN 60/62HRC
Blade Finish: High Visibility Orange
Handle: Carbon Fiber
Blade Length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 50.2g.
Scabbard: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15500OR-2 -
Acta Non Verba - P200 - Stonewashed N690Co - Black G10 and Kydex - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-006 -
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Boker Plus - Vox G10 field knife - 01BO375 - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper VoxnaesBO-01BO375 -
Boker Plus - SubCom 2.0 folder knife - D2 - 01BO525 - knife
Today, Chad Los Banos' practical Boker Plus Subcom can definitely be called one of the cornerstones of Boker Plus. The continued popularity of this versatile pocket knife has prompted Boker to put this ultra-compact classic back into production in a modernized version. The Boker Plus Subcom 2.0 comes with a short D2 steel blade with a discreet pearl finish. It opens with the help of the thumb pin on both sides and is securely locked in place by the framelock's 2mm thick steel plate. The textured black Zytel handle is supplied with three-dimensional milling.
Intended use: Sports
Blade: D2 steel 59-60 hours
Handle: stainless steel and Zytel
Blade length: 58mm.
Blade thickness: 2mm.
Closed length: 68mm.
Total height of the lung: 117 mm.
Balance: -
Pesos: 69 g.
Closure: frame lock
Clip: removable and reversible in stainless steel
Sheath: -
Grade: -BO-01BO525 -
BlackFox - Lollypop Fixed by Tommaso Rumici - BF-755 - coltello
Destinazione d'uso: Outdoor / Utility / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: Acciaio Inox 440C
Trattamento lama: Blackwashed
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3.5mm.
Lunghezza totale: 115mm.
Peso: 71g.
Fodero: in Kydex, con clip in acciaio inox
Confezione: scatola in cartone con loghi BlackFox
Note: Design by Tommaso RumiciBF-755 -
BlackFox - Plan B Rescue Tool by Tommaso Rumici - BF-754 - knife
Intended Use: Rescue Tool / Utility
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-754 -
BlackFox - Arrow Fixed by Tommaso Rumici - BF-753 - knife
Intended Use: EDC / Utility / Tactical/
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 71g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-753 -
ExtremaRatio - Satre - N690 Black - Neck Knife - Knife
Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.
It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).
In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.
The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle
This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.
Intended use: Neck / Hiking / Utility Knife
Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)ER-SAT-BL -
Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.
The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6032 -
Pohl Force - Compact Two SW - D2 steel - 6031 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6031 -
Pohl Force - Compact One SW - D2 steel - 6021 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6021 -
Antonini knives - Old Bear knife in SanMai VG10 a 67 layers - 23cm - multilayer black - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/23_MNK -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
ExtremaRatio - G.O.I. Caimano Nero N.A. Flipper - Knife
NON-automatic version of the Caimano Nero model
The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.
Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.
It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.
The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.
Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.
Destination of use: Tactical/Military
Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is openER-CAI-NA -
Boker Plus - Connector G10 Knife - 01BO354 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 78g.
Clip: removable steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearingsBO-01BO354 -
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
Cold Steel - SR1 Lite Tanto Point knife - 62K1A - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1A -
Cold Steel - SR1 Lite knife - 62K1 - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1 -
Boker Plus - Kwaiken Air G10 Black by Lucas Burnley - 01BO339 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total lenght: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening systemBO-01BO339 -
Maserin - Diabolik knife - Walnut - 24k gold engraving - N690 steel - 999LG - knife
On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.
The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.
Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition productMA-999LG -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Fox - Fairbairn Sykes Fighting Knife - Black PVD Aluminum - FX-592 - knife
The dagger is based on the original Fairbairn and Sykes; it is a collector's knife designed by Hill Knives to honor and commemorate special forces around the world.
PLEASE NOTE: The blade leaves the factory unsharpened, so that this product is free for sale and free possession according to the current regulations in force on Italian territory.
Intended Use: Tactical/Military/Collectibles
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: PVD
Handle: Aluminum
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balance: Backward
Weight: 205g.
Sheath: leather
Packaging: cardboard box with FKMD logos
Notes: unsharpened blade - design by Hill Knives
Translated with DeepLFX-592 -
Boker Plus - SubCom 2.0 All Black - 01BO526 - knife
Chad Banos' practical Bo Plus Subcom can definitely be described as one of the leaders of Boker Plus today.
The enormous value of utility in everyday life and the space-saving design have become legendary. The continued popularity of the versatile pocket knife has now prompted us to relaunch this ultra-compact classic in our range in a modernized version.
The Böker Plus Subcom 2.0 is equipped with a short D2 blade with black coating.
It opens using the thumb pins on both sides and locked in place firmly by the 2mm steel plate of the frame lock. A pronounced hand protection increases grip comfort and glide in the blade.
The structured handle in black Zytel has three-dimensional grooves and thanks to this surface structure, the ergonomic shape and the ribs in the thumb rest area, it always stays firmly in the hand, even when wet. With lanyard hole and reversible clip
Intended use: Sports
Blade: D2 steel 58/60 hours
Handle: stainless steel and Zytel
Blade length: 55mm.
Blade thickness: 2mm.
Closed length: 68mm.
Total height of the lung: 117 mm.
Balance: -
Pesos: 69 g.
Closure: frame lock
Clip: removable and reversible in stainless steel
Sheath: -
Grade: -BO-01BO526 -
Santa Fe Stoneworks - SFS-TC-MP1 - Mother of Pearl - Letter opener
In the shadow of the Sangre de Cristo Mountains in New Mexico lies a 100-year-old ranch where the artisans of Santa Fe Stoneworks produce objects of rare beauty. From unique custom designs to the most popular and affordable collections of pocket knives, table and kitchen cutlery, gifts and various accessories.
Each of Santa Fe Stoneworks' collectors' items is unique: the quintessential combination of steel with precious stones, shells or exquisite wood inlays.
A beautiful and functional letter opener, a small jewel of high quality. The handle features a geometric figure.
Features:
- stainless steel blade - NON-SPARKED
- total length: 240mm
- blade length: 145mm
- blade thickness: 2mm
- weight: 53gr
- note: wooden handle, mother-of-pearl and black amber, handcraftedSFS-TC-MP1€73.77Only 2 left -
Sanelli Ambrogio - Supra line frozen food knife 26 cm
Line of cutlery expressly designed for professional use: blades produced with special nitrogen steel NITRO-B (1.4916) and ergonomic handles in SEBS. The materials used are sterilisable, resistant to corrosion and high temperatures, and comply with current hygiene and food safety regulations.
A wide range of products, safe to use, functional shapes and excellent value for money make Supra knives irreplaceable working tools for professional operators.
Sanelli Ambrogio - Supra line frozen food knife
The Sanelli Ambrogio frozen food and ice knife cm 26 is a product with an almost unbeatable quality/price ratio.
FEATURES This product is equipped with a satin-finished blade made of Bonpertuis® special nitrogen stainless steel, whose adherence to the handle is total, so as to ensure maximum hygiene; speaking of the blade, its length is 26 cm. Hand-sharpened, the Sanelli Ambrogio frozen food and ice knife has a non-toxic, non-slip, ergonomic and abrasion-resistant handle. The laser marking of the logo is precise and indelible. Another prerogative of the knife is that it is made with a special serration, double for precision; the material it is made of makes it dishwasher safe, with a black TPE elastomer handle.
USE The frozen food and ice knife is ideal for cutting frozen meat, fish and vegetables; it is also suitable for working with, bevelling and breaking up ice cubes to fit your glass.
s355.026 -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Wander Tactical - Smilodon knife - Stone Edge Finish & Black Micarta - custom knife
Type of production: Artisanal
Blade production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Stone Edge Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 360mm.
Balance: backwards
Weight: 624g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: unique and handcrafted knifeWT-SM-SEF-B -
Bastinelli Knives - Picoeur Black knife Doug Marcaida - Scalpel Karambit Neck Knife
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox CutleryBC-07B