Year 2023
-
Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC69PBL3K390 -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Spyderco - Chaparral knife Gray FRN - PRIVATE COLLECTION - C152PGY - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDCType of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal GlesserC152PGY -
Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10SBK -
Spyderco - Military Plain knife - C36GPE knife
Intended use: Sport / Tactical
Type of production: Industrial
Blade Production: U.S.A.
Blade: CPM 30SV stainless steel
Blade treatment: -
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Closed length 140mm.
Total length: 241mm.
Closed thickness: 15mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: removable, in stainless steel
Scabbard: -
Packaging: cardboard box with Spyderco logos
Note: -3720PS -
Spyderco - Poliwog Knife C98F - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.
Intended use: Sporting / EDC
Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -AP-C98F -
Spyderco - Kevin Smock Knife C240CFP - S30V - Carbon Fiber/G10 - collection knife
Spyderco's Smock Knife is one of the most anticipated knives of recent times. Crafted in collaboration with renowned knifemaker Kevin Smock, the knife features a unique design that combines an elegant front opening and a push-button actuated Compression Lock locking mechanism.
Kevin Smock, a knife enthusiast since childhood, began customizing stock knives in 2012 and has subsequently developed his skills in craft knife making. His passion for knives is combined with his experience in product design, leading to the creation of innovative and unconventional knives.
Intended use: Sport/EDC
Type of production: Industrial
Blade production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: Carbon Fiber
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 11mm.
Balancing: -
Weight: 104g.
Closure: Compression Lock
Clips: Stainless steel
Scabbard: -
Packaging: Cardboard box with Spyderco logos
Note: -C240CFP-OLD -
Spyderco - Para 3 Black - Lightweight Knife - FRN Black - C223PBBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CTS BD-1
Blade treatment: Black DLC
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 model with G10 handleC223PBBK -
Spyderco - Paramilitary 2 knife - Brown Canvas Micarta - CruWear steel - C81MPCW2 - knife
The Spyderco Paramilitary 2 is one of the most popular knives on the market, known for its high build quality, premium materials, attractive aesthetics, and ease of one-handed use. These characteristics have made it very popular among soldiers, builders, hunters, survivalists, and everyday knife carriers around the world. Every knife enthusiast should have a PM2 in their collection.
The Paramilitary 2 is available in numerous versions, with different colors and materials for the blade and handle. However, it should be noted that, due to the full liners, this knife is not compatible with most aftermarket components.
The Paramilitary 2 is the second version of the old Para Military, a model designed by Spyderco as a more compact and accessible version of their Military model. If you're looking for something even more compact, the Para 3 might be the right choice.
Intended use: Sporting / Collection
Type of production: Industrial
Blade production: USA
Blade: In CPM-CRUWEAR stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed length: 122mm.
Total length: 210mm.
Closed thickness: -
Balance: -
Weight: 110g.
Closure: Compression Lock
Clip: in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C81MPCW2 -
Spyderco - Cricket Knife - C29BK - ATS-55 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratoryIntended use: Sporting
Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.AP-C29BK -
Spyderco - Assist Knife - C79BK - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory
Intended use: SportingType of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.AP-C79BK -
Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good conditionAP-C28S -
Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good conditionAP-C11GPFG -
Spyderco - Para 3 - PVD - CPM-S45VN - G10 Black - C223GPBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C223GPBK -
Spyderco - Spydiechef Titanium by Marcin Slysz - C211TI - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin SlyszC211TI -
Spyderco - Civilian knife - C12GS knife
Intended use: tactical
Type of production: industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: G-10 carrier with stainless steel right liner
Blade length: 106mm.
Blade thickness: 3mm.
Closed length: 132mm.
Total length: 234mm.
Balancing: -
Weight: 234g.
Closure: Back Lock
Clip: in stainless steel, reversible and removable
Scabbard: -
Note:C12GS -
Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 115g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -SP-C11S