Zero Tolerance

Private retired knife - Rare model produced by Zero Tolerance until 2014 - Overall in good condition, with two scratches on the right side of the blade - Without original box - Original sharpening - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended use: Tactical

Type of production: Industrial
Production Lama: USA
Blade: full tang in CPM-S30V steel
Blade treatment: Tungsten DLC
Handle: G-10 with 3D processing
Blade length: 105mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 205mm.
Thick when closed: -
Balancing: back to 1.5cm
Weight: 264g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: cardboard box with Zero Tolerance logos
Notes: design by Mick Strider

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Satin & Stonewashed
Handle: Stonewashed Titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Closed thickness: 12mm.
Weight: 152g.
Closing system: Frame Lock
Clip: deep carry type, removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type or through lost ambidextrous on the blade, on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: blackwash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thickness when closed: -
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run Edition available while stocks last - Design by Gustavo T. GTC Knives Coppers - KVT opening on ball bearings - SLT opening system Spring Loaded Tab

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with marbled carbon fiber insert
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Weight: 95g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-S20CV stainless steel
Blade treatment: Satin
Handle: Titanium and bronze-colored carbon fiber
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 225mm.
Weight: 107g.
Closure: Framelock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Carson Flipper opening system

The new Zero Tolerance 0609 is a smaller, even more carry-ready version of the original Factory Custom 0606CF from ZT, RJ Martin, and Matt Martin. Like the original, it offers a clean, streamlined look yet also has highly detailed handle machining that adds both grip and visual impact. For even more visual “wow,” the 3D-machined handle is built of light-yet-strong titanium that ZT has anodized in an attractive bronze.

The 3.4-inch blade is CPM 20CV, which provides enhanced toughness and resistance to edge chipping. It also delivers superior hardness, corrosion resistance, and excellent edge retention. The drop-point blade has a two-tone finish: machined satin on the grinds with a stonewashed finish on the flats. The new 0609 opens manually with ZT’s KVT ball-bearing opening system and the handy flipper so it’s always ready when you want it.

Last—but certainly not least—you’ll notice the oversized See-Through Pivot (STP). Designed by RJ Martin, this unique, pivot is hollow in the center, letting you “see through” it. The See-Through Pivot adds another intriguing touch to this already-attractive knife.

 

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Carbon fiber and titanium
Blade length: 83mm.
Blade thickness: 3mm.
Closed Length: 112mm.
Overall length: 191mm.
Thick when closed: -
Weight: 65g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings - Opening system Carson Flipper

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-20CV
Blade treatment: stonewashed - satin
Handle: Carbon fiber with aluminum spacers
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Overall length: 221mm.
Thick when closed: -
Weight: 122g.
Closing: Sub Framelock hardened steel
Clip: Removable, titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Sinkevich & Rexford

Intended use: EDC / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 111mm.
Overall length: 187mm.
Weight: 68g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

 

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: CPM-S35VN Stainless steel 
Treatment Blade: Bladewash Tungsten DLC Coating
Handle: Stainless Steel and Black G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 196mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 150g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening system Speedsafe

Zero Tolerance - Strider Onion Folder Black G10 - ZT350 - knife

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Tungsten DLC Coating
Handle: G-10 with 3D finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thick when closed: 13mm.
Balance: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system

Special edition limited edition "Factory Custom Knife" in collaboration with R.J. Martin and Matt Martin. It is characterized by the total absence of fasteners in the front part and the handle for the particular processing: three-dimensionally machined with numerical control, anodized in gold, again three-dimensionally machined and anodized again in blue.

Intended Use: Collection / Sports
Type of production: Industrial handcrafted pieces
Country of Origin: USA
Blade: Stainless steel CTS-XHP
Blade treatment: Satin finish and matte black DLC
Handle: Titanium with double anodized in blue and gold with inserts and spacer made of carbon fiber
Blade length: 102mm.
Blade thickness: 4.8mm.
Closed Length: 122mm.
Overall length: 226mm.
Thick when closed: 15mm.
Weight: 186g.
Lock: Frame Lock
Clip: titanium, made from solid, with double anodizing
Packaging: collectible box with logos Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by R.J. Martin and Matt Martin - Opening system KVT on ball bearings with engagement by Flipper

Knife withdrawn from private - Condition equal to new, presents only some signs, visible in the photos, on the titanium in the handle. Never reground. Controlled and certified by our internal laboratory Collini Cutlery.

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on ball bearings KVT Ball Bearing System - Opening through Carson Flipper system

Private knife - Rare model produced by Zero Tolerance until 2014 - Globally in excellent condition - Without original box - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical

Type of production: Industrial
Blade production: USA
Blade: full tang in CPM-S30V steel
Blade treatment: Tungsten DLC
Handle: G-10 with 3D processing
Blade length: 105mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 205mm.
Thick when closed: -
Balancing: set back to 1.5cm
Weight: 264g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: cardboard box with Zero Tolerance logos
Notes: design by Mick Strider

Knife withdrawn from a private collection - Model born from the collaboration with Ken Onion, folding version of the fixed blade model ZT0100 - out of production - Like new, original sharpening, no packaging - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 154CM stainless steel
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel folders
Blade length: 101mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 222mm.
Thick when closed: 21mm.
Weight: 225g.
Closing: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

Knife withdrawn from a private collection - One of the first models produced by Zero Tolerance and no longer in production since 2014 - Excellent condition, very small scratches on the blade, without original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Tactical / Military

Type of production: Industrial
Blade production: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Length closed: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Coltello fuori produzione - ultimo esemplare a nostra disposizione - articolo privo di scatola

Destinazione d'uso: Tattico

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM3V
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.5cm
Peso: 320g.
Chiusura: -
Clip: -
Fodero: Nylon e Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Ken Onion

Destinazione d'uso: Tattico

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM-S30V
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D
Lunghezza lama: 105mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 205mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.5cm
Peso: 264g.
Chiusura: -
Clip: -
Fodero: Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Mick Strider

Destinazione d'uso: Tattico/Militare

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio CPM-S30V
Trattamento Lama: Tungsten DLC Coating
Manicatura: Titanio e G-10 con finitura 3D
Lunghezza lama: 95mm.
Spessore lama: 4mm.
Lunghezza chiuso: 133mm.
Lunghezza totale: 218mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 232g.
Chiusura: Frame Lock
Clip: Amovibile, Multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Design by Mick Strider and Ken Onion - Sistema di apertura SpeedSafe

Strider Ranger Green Onion - ZT0301 knife

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Lama: In steel CPM-S30V
Treatment Lama: Tungsten DLC Coating
Handle: Titanium and G-10 finish 3D
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Overall length: 218mm.
Thick when closed: 17mm.
Balancing: -
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Destinazione d'uso: Tattico/Militare

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio CPM-S30V
Trattamento Lama: Tungsten DLC Coating
Manicatura: Titanio e G-10 con finitura 3D
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 195mm.
Spessore da chiuso: 13mm.
Bilanciatura: -
Peso: 162g.
Chiusura: Liner Lock
Clip: Amovibile, Multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Design by Mick Strider and Ken Onion - Sistema di apertura SpeedSafe

Zero Tolerance - G10 Shifter Black - ZT160 knife

Intended Use: Tactical / Sports

Type of production: Industrial
Production Lama USA
Blade: stainless steel 14C28N
Treatment Blade: Tungsten DLC
Handle: Black G10 with 3D machining
Blade length: 127mm.
Blade thickness: 4mm.
Length closed: -
Total length: 254mm.
Thick when closed: -
Balance: -
Weight: 240g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos Zero Tolerance
Notes:

Questo coltello è nato dalla collaborazione tra Zero Tolerance e Strider Knife.
Destinazione d'uso: Tattico/Collezione

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM3V
Trattamento Lama: stone washed finish
Manicatura: G-10 textured G10 ranger green
Lunghezza lama: 190mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 310mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.0cm dalla guardia
Peso: 560g.
Chiusura: -
Clip: -
Fodero: Nylon e Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Coltello a filo singolo di libra vendita e di libera detenzione, con guardia standard che non si adatta a nessuna canna o frangifiamma specifico di arma da fuoco.

Zero Tolerance - Hinderer Folder Titanium - ZT560 - knife

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax 59/61HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10 with 3D finish
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 224mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT on ball bearings - Hinderer Lockback Stabilizer

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Blade: CPM-S35VN Stainless steel
Treatment Blade: Stonewashed
Handle: Stainless Steel and G-10 Black
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 196mm.
Thick when closed: 12mm.
Balancing: -
Weight: 150g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Blade: Stainless steel S35VN
Treatment Blade: Stonewashed
Handle: Stainless Steel and Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 196mm.
Thick when closed: 12mm.
Balancing: -
Weight: 145g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwash
Handle: Titanium and G-10 finish 3D
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Overall length: 224mm.
Weight: 168g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT ball-bearing - Hinderer Lockback Stabilizer

The Zero Tolerance 0808 is our latest piece of pocket technology. It's a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. But the technology here isn’t circuits and wires. Instead, it’s advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system.

The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.

Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.

The 0808’s blade is paired with chamfered titanium handles that provide a solid, and very durable, grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed. Move over, iPhone. The 0808 deserves pocket space.

Rexford Folder Titanium - ZT0808 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing

Zero Tolerance and Rick Hinderer teamed up to build the new 0562 with its exclusive Hinderer "slicer" grind.

The ELMAX® powdered steel blade with flat-ground “slicer” grind provides both slicing efficiency and a tough point. ELMAX is a third-generation powdered steel with virtually no nonmetallic inclusions. This means it offers an extremely uniform distribution of carbides for high wear and corrosion resistance. Zero Tolerance sharpens it to a hair popping edge and the ELMAX ensures it holds that edge for a long time, even under hard use.

The knife opens with a flipper and moves out of the handle on our smooth KVT ball-bearing opening system. A washer with caged ball bearings surrounds the pivot and makes opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562 is ready for action.

The handle has a G-10 textured scale in front and a stonewashed titanium back. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization so the lock won't overextend.

The unique pocketclip is reversible (left/right) and enables extra-deep carry in the pocket. .

Zero Tolerance - Hinderer Slicer Frame Lock - Stonewashed - ZT0562 - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and G-10 Black
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - opening system Speedsafe

Intended use: Sport / Collection

Type of production: Industrial
Production Country: USA
Blade: Stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwashwash
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 165g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Todd Rexford - Opening KVT ball-bearing

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CTS-204P 60 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 225mm.
Weight: 145g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings