Zero Tolerance

Knife withdrawn from private collection - Rare model no longer in production.

The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.

The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.

The handle is made of aluminum with textured G-10 grips, providing a solid grip.

This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.

NOS FULL SET KNIFE, NEW FROM STOCK

Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratory

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like-new condition
* Commercially available Discontinued as of 2022
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present (but from a different ZT knife).
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Collection

Type of Production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thickness when closed: 14mm.
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Translated with DeepL

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium Blackwash and Carbon Fiber Red and Black
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 125g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system - Limited Edition "Factory Special Series"

Intended Use: Sporting/Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Blackwash
Handle: Carbon fiber and Titanium Blackwash
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by Sinkevich - Limited Edition "Factory Special Series"

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thick when closed: 14mm
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Black DLC Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thick when closed: 14mm
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: "Sprint Run" Limited Edition available while stocks last - Design by Gustavo T. Cecchini by GTC Knives - KVT opening on ball bearings - SLT Spring Loaded Tab opening system

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, made of stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Ball bearing opening KVT Ball Bearing System - Opening by Carson Flipper system

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: blackwash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thickness when closed: -
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run Edition available while stocks last - Design by Gustavo T. GTC Knives Coppers - KVT opening on ball bearings - SLT opening system Spring Loaded Tab

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Blackwash
Handle: Blackwash Titanium and White and Black Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: FrameLock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening by Carson Flipper system - Limited edition of Sprint Run

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: Black DLC
Handle: Titanium with DLC treatment
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 190mm.
Weight: 126g.
Closing: FrameLock with stainless steel knocker
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings - Limited edition Sprint Run

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Dual Tone: satin finishing and Black DLC
Handle: Titanium anodized and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 119mm.
Total length: 209mm.
Thick when closed: 14mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel with Black DLC treatment, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT opening system on ball bearings with engagement by Carson Flipper system

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Gray
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Green
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Intended Use: Tactical/Military

Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper System

Purpose: Sportsman / Collectibles

Type of production: Industrial
Blade Production: U.S.A.
Blade: Stainless steel CPM 20CV
Blade Treatment: Blackwash
Manicure: Titanium with anodized spacers
Blade Length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Overall length: 193mm.
Closed thickness: 14mm.
Weight: 176g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 Orange
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening of ball bearings Ball Bearing System KVT - opening via Carson Flipper system

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CTS-204P 60 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 225mm.
Weight: 145g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings

Intended use: EDC / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 111mm.
Overall length: 187mm.
Weight: 68g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings

Intended use: Sport / Collection

Type of production: Industrial
Production Country: USA
Blade: Stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwashwash
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 165g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Todd Rexford - Opening KVT ball-bearing

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwash
Handle: Titanium and G-10 finish 3D
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Overall length: 224mm.
Weight: 168g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT ball-bearing - Hinderer Lockback Stabilizer

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Lama: In steel CPM-S30V
Blade treatment: Coating Blackwash
Handle: G-10 folder with stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: CPM-S35VN Stainless steel 
Treatment Blade: Bladewash Tungsten DLC Coating
Handle: Stainless Steel and Black G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 196mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 150g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening system Speedsafe

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Washed Tungsten DLC Coating
Handle: Titanium and G-10 Washed with 3D finish
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thick when closed: 17mm.
Balance: -
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system

Zero Tolerance - Combat Black G10 - ZT170 knife

Intended Use: Tactical

Type of production: Industrial
Production Lama USA
Blade: stainless steel 14C28N
Treatment Blade: Tungsten DLC
Handle: Black G10 with 3D machining
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: -
Total length: 294mm.
Thick when closed: -
Balance: -
Weight: 370g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos Zero Tolerance
Notes:

Zero Tolerance - G10 Shifter Black - ZT160 knife

Intended Use: Tactical / Sports

Type of production: Industrial
Production Lama USA
Blade: stainless steel 14C28N
Treatment Blade: Tungsten DLC
Handle: Black G10 with 3D machining
Blade length: 127mm.
Blade thickness: 4mm.
Length closed: -
Total length: 254mm.
Thick when closed: -
Balance: -
Weight: 240g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos Zero Tolerance
Notes:

Coltello fuori produzione - ultimo esemplare a nostra disposizione - articolo privo di scatola

Destinazione d'uso: Tattico

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM3V
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.5cm
Peso: 320g.
Chiusura: -
Clip: -
Fodero: Nylon e Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Ken Onion

Zero Tolerance - Strider Onion Folder Black G10 - ZT350 - knife

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Tungsten DLC Coating
Handle: G-10 with 3D finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thick when closed: 13mm.
Balance: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system