american pride

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

The Chris Reeve Green Beret 7" Knife – 2025 Version, designed by the renowned William W. Harsey, represents one of the highest expressions of modern high-performance tactical knives. Born from the collaboration between Chris Reeve Knives and U.S. Special Forces, the Green Beret is an iconic blade, highly regarded both in operational environments and in high-end knife collecting. This new 2025 version introduces the outstanding CPM-MagnaCut steel, heat-treated to 61/62 HRC, offering an exceptional balance of edge retention, corrosion resistance, and structural toughness.

The 7-inch blade with Black PVD coating ensures tactical discretion and enhanced protection, while the Black Canvas Micarta handle provides a secure grip and absolute control in all conditions. Semi-industrially manufactured in the United States, in Boise, Idaho, the Green Beret 7" is perfectly balanced on the lower guard branch and comes complete with a M.O.L.L.E.-compatible nylon thigh sheath, as well as official certificates of authenticity and warranty. A knife designed for those who demand the very best, both as a fighter tool and as a premium collector’s piece.

Technical Specifications
Intended use: Collection / Fighter
Production type: Semi-industrial
Country of manufacture: Boise – Idaho – USA
Blade: CPM-MagnaCut stainless steel, hardened to 61/62 HRC
Blade finish: Black PVD
Handle: Black Canvas Micarta
Blade length: 180mm
Blade thickness: 5.58mm
Overall length: 315mm
Balance: On the lower guard branch
Weight: 363g
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: New 2025 version – Warranty and authenticity certificates – Design by William W. Harsey

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Iconic knife from the early 2000s, used, but overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: Signs of wear typical of this model and material, given by rubbing against the sheath
* Marks on handle: None, normal workmanship marks found on all these models.
* Box: /
* Scabbard: Present, in very good condition, with normal signs of workmanship present on all of these models.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory.

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after heavy use.

The knives have been tested and selected by U.S. Navy SEALs, who have used them in sensitive missions and special operations. Because of their incredible durability, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and high-end outdoor equipment enthusiasts.

Intended Use: Tactical/Sub

Type of Manufacture: industrial
Blade: made of Beta Titanium with a micropeened finish
Country of manufacture USA
Handle: Hytrel
Blade length: 185mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 264g.
Sheath: made of Hytrel and rubber, with Nylon strap
Packaging: /
Notes: previously purchased knife, from private collection - discontinued, iconic early 2000s product

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty