Fallkniven

Fällkniven AB is a Sweden-based manufacturer of knives and knife-related gear and apparel. Fällkniven was founded in 1984 in Boden by Peter Hjortberger. The company started importing knives and, in 1987, began designing knives. In 2009 Eric Hjortberger, the founder's son, took over as president of Fällkniven AB

Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr

F-FDC
$21.92

Only 1 left
Only 1 left
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cm
Total open size with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 67 gr

F-FDD
$21.92

Only 1 left
Only 1 left
Fallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel
F-PXLey
$333.28

Only 99 left
Only 99 left
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel
F-PXLbm
$328.89

Only 1 left
Only 1 left
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -
F-P3Gic
$210.49

Only 99 left
Only 99 left
Fallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -
F-RL1EY
$236.80

Only 98 left
Only 98 left
Fallkniven - C10 - Ceramic sharpener - Knives maintenance
Ceramic sharpener designed to sharpen both kitchen and sport knives; it has a shaft length of 27cm for a total of 41cm including the thermoplastic handle. It has a superficial hardness of 9 on the Mohs scale (diamond has a value of 10).
Quality level: high
F-C10
$34.21

Only 2 left
Only 2 left
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:
F-RL1DI
$236.80

Only 98 left
Only 98 left
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -
F-TF1Z
$315.74

Only 99 left
Only 99 left
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -
F-TF2Z
$197.34

Only 1 left
Only 1 left
Fallkniven - H1 Zytel knife - CoS steel - knife
Available only with Zytel sheath - discontinued leather sheath
Intended use: hunting
Type of production: Industrial
Production Lama: Japan
Blade: full tang in San-Mai CoS / 420J2 59HRC stainless steel
Blade treatment: -
Handle: Thermorun E
Blade length: 100mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 215mm.
Thick when closed: -
Balance: set back, at 2cm.
Weight: 188g.
Closing: -
Clip: -
Sheath: in Zytel
Packaging: white cardboard box with Fallkniven logos
Note: -
F-H1
$201.72

Only 99 left
Only 99 left
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.

If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -
F-TH2Z
$157.87

Only 99 left
Only 99 left
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.

As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -
F-TH1Z
$271.89

Only 99 left
Only 99 left
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -
F-SK2L
$333.28

Only 99 left
Only 99 left
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community
F-S1X
$280.66

Only 1 left
Only 1 left
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community
F-S1XB
$315.74

Only 99 left
Only 99 left
Fallkniven - F1x Pilot Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -

F-F1X
$219.26

Only 1 left
Only 1 left
Rating:
93%
4.7
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -
F-A1XB
$377.13

Only 99 left
Only 99 left
Fallkniven - F1xb Pilot Knife black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 222mm.
Balancing: set back to 2cm. from the guard branch
Weight: 222g.
Closing: -
Sheath: in zytel
Note: -
F-F1XB
$245.58

Only 1 left
Only 1 left
Rating:
100%
5
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -
F-A1X
$342.05

Only 1 left
Only 1 left
Rating:
98%
4.9
Fallkniven - FS4 FlipStone - Ceramic and Diamond Pocket Sharpener
Stone pocket , for sharpening, with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife, with quick-release mechanism with safety lock to prevent accidental opening. The closure is done by pressing and releasing the button opening .

Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .

The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .

The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.

Stone Size : 30x80 mm .
Open length : 190 mm .
Closed Length : 110 mm .
Handle: Zytel

Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .

Quality level : High
F-FS4
$43.85

Only 99 left
Only 99 left
Rating:
93%
4.7
Fallkniven - FS3 FlipStone - Affiatore Ceramic and Diamond Pocket
Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .

Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .

The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .

The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.

Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel

Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .

Quality level : High
F-FS3
$40.34

Only 1 left
Only 1 left
Rating:
100%
5
Fallkniven - DC521 - Whetstone to Diamond and Ceramic
Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.
Dimensions of 55mm in width, 210mm in length and 6mm in thickness
Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.
F-DC521
$79.81

Only 99 left
Only 99 left
Fallkniven - Alpha - Chef 20cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone.Mod. Alpha Total length (mm) 330 Blade length (mm) 200 Blade thickness (mm) 3 Blade profile Convex Tang Full tang construction Weight (knife) 260g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivets
F-ALPHA
$477.99

Only 99 left
Only 99 left
Fallkniven - Delta - Santoku 15.5cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone.Mod. Delta Total length (mm) 280 Blade length (mm) 155 Blade thickness (mm) 3 Blade profile Convex Tang Full tang construction Weight (knife) 230g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivets
F-DELTA
$454.31

Only 99 left
Only 99 left
Fallkniven - Sierra - Paring Knife 11.5cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone.Mod. Sierra Total length (mm) 225 Blade length (mm) 115 Blade thickness (mm) 2 Blade profile Convex Tang Full tang construction Weight (knife) 110g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivets
F-SIERRA
$350.82

Only 99 left
Only 99 left
Fallkniven - Zulu - Paring Knife 7.5cm
The CMT Chef’s Knife Series stands out as one of the most exclusive kitchen knife series in the world. Those who appreciate high quality handmade knives in general should find that this is a series especially made for them. Qualities like high grade steel, handle material, overall design and way of manufacturing will tell the purchaser that these kitchen knives are made with the same care as our best fixed blade hunting & outdoor knives. With normal care, these knives will serve through your whole life, like our hunting knives. Every knife is delivered in a solid wood gift box. CMT stands for Character, Morse and Telephone.Mod. Zulu Total length (mm) 175 Blade length (mm) 75 Blade thickness (mm) 2 Blade profile Convex Tang Full tang construction Weight (knife) 80g Steel Lam.CoS Hardness 60 HRC Handle material Maroon micarta Finger guard Welded stainless bolster, Stainless rivets
F-ZULU
$328.89

Only 99 left
Only 99 left
Fallkniven - DF24 - the Diamond Pocket Sharpener
Pocket Stone Diamond medium grain, excellent for quickly sharpen knives and multi-purpose sports while outdoors.
Mounted on a practical nylon support, has dimensions of 20x60mm
F-DF24
$10.09

Only 2 left
Only 2 left
Rating:
90%
4.5
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:
F-A1BLZ
$254.34

Only 99 left
Only 99 left
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare

Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:
F-A1Z
$223.65

Only 99 left
Only 99 left
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath
F-A2
$381.52

Only 99 left
Only 99 left
Rating:
100%
5
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995
F-F1BL
$179.80

Only 1 left
Only 1 left
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps
F-NL1
$666.56

Only 99 left
Only 99 left
Rating:
100%
5
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:
F-NL2
$600.78

Only 99 left
Only 99 left
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps
F-NL4
$407.83

Only 99 left
Only 99 left
Fallkniven - NL5cx - Idun Damasco - coltello
Destinazione d'uso: collezione/caccia

Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -
F-NL5CX
$1,929.51

Only 99 left
Only 99 left
Fallkniven - PHK - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numbered
F-PHK
$385.90

Only 99 left
Only 99 left
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare

Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:
F-S1BLZ
$201.72

Only 99 left
Only 99 left
Rating:
93%
4.7
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:
F-S1Z
$192.95

Only 1 left
Only 1 left
Fallkniven - SK1 Jarl Betulla - fodero in cuoio - coltello
Destinazione d'uso: Caccia

Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Legno di Betulla
Lunghezza lama: 100mm.
Spessore della lama: 4,5mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrato di 1 cm dal ramo di guardia
Peso: 134g.
Fodero: Cuoio
Note: -
F-SK1
$372.75

Only 99 left
Only 99 left
Fallkniven - SK3 Juni Birch - leather sheath - knife
Intended Use: Hunting
Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -
F-SK3
$306.97

Only 99 left
Only 99 left
Fallkniven - TK3 knife - Jigged Bone - coltello
Destinazione d'uso: sportivo

Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Sweden
Manicatura: Acciaio Inox 420J2 e Cervo Ambrato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 95mm.
Lunghezza totale: 165mm.
Bilanciatura: -
Peso: 100g.
Chiusura: Back Lock
Clip: -
Fodero: Nylon
Note: -
F-TK3JB
$293.81

Only 100 left
Only 100 left
Rating:
100%
5
Fallkniven - TK3ic knife - Cocobolo - coltello
Fallkniven Tre Kronor TK3

La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in cordura
F-TK3ic
$285.04

Only 99 left
Only 99 left
Fallkniven - TK4 - Zytel - knife
Fallkniven Tre Kronor TK4
The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Zytel
Blade length: 70 mm.
Blade Thickness: 2.5 mm.
Total length: 165 mm.
Weight: 50 g.
Closure: BackLock
Sheath: Black Cordura
F-TK4
$188.57

Only 98 left
Only 98 left
Rating:
97%
4.9
Fallkniven - FH9 Braun Micarta - Knife
Type of production: Industrial
Blade: 3G laminated steel three-layer (VG2 SGPS and "Super Gold Powder Stainless Steel" to 62 HRC)
Blade treatment: -
Production Lama: Sweden
Handle: Stainless Steel 420J2 and brown micarta
Blade length: 67mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Overall length: 157mm.
Weight: 90g.
Closing: Lockback
Clips: stainless steel
Notes: -
F-FH9
$231.54

Only 99 left
Only 99 left
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.

Intended use: tactical/military/hunting
Blade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.
F-F1LW
$175.41

Out of stock
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -
F-F1XBElmax
$289.43

Rating:
100%
5
Out of stock
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -
F-F1XElmax
$236.80

Rating:
100%
5
Out of stock

Recent Blog Posts

Coltelli MoraKniv: L'Emozionante Viaggio nel Mondo dei Coltelli Svedesi di Alta Qualità
Posted: March 22, 2023
Categories: Knives - coltelli e accessori

Immergiti nell'affascinante mondo dei coltelli Morakniv e scopri la storia, la tradizione e l'eccezionale qualità che li contraddistingue. In questo articolo completo ed emozionante, esploriamo la vasta gamma di coltelli svedesi perfetti per gli appassionati di outdoor, caccia e sopravvivenza. Conoscerai i diversi modelli e le loro caratteristiche uniche, come il Companion, il Bushcraft e il Kansbol, e l'importanza dei materiali utilizzati nella loro realizzazione, come l'acciaio inossidabile e l'acciaio al carbonio.
Scopri il ruolo della rinomata Coltelleria Collini di Busto Arsizio, rivenditore ufficiale dei coltelli Morakniv, e del loro servizio esclusivo di incisione a laser sulla lama. Questa personalizzazione rende il tuo coltello un pezzo unico, arricchito con il tuo nome, un messaggio significativo o un simbolo che rappresenti la tua passione per l'avventura e la natura.
Impara a prenderti cura del tuo coltello Morakniv, seguendo semplici regole di manutenzione che ne garantiranno la durata e l'efficienza nel tempo. Lasciati guidare dalle emozioni e vivi avventure indimenticabili in compagnia del tuo fedele alleato, il coltello Morakniv personalizzato. Scegli il tuo modello preferito, personalizzalo e preparati ad affrontare ogni sfida che la natura ti riserva con passione, coraggio e determinazione, grazie alla qualità e all'affidabilità dei coltelli Morakniv.
Read more »
Coltelli Benchmade: Storia, Qualità e Modelli Iconici | Coltellera Collini
Posted: March 17, 2023
Categories: Knives - coltelli e accessori

In questo articolo dettagliato, viene esplorato il rinomato marchio Benchmade, famoso per la produzione di coltelli di alta qualità e dall'innovativo design. L'articolo si concentra sulla storia dell'azienda, sulle caratteristiche distintive dei suoi coltelli e sui modelli più iconici e apprezzati dai professionisti e dagli appassionati di coltelli.
Si approfondisce l'impegno di Benchmade nella realizzazione di coltelli di eccellente qualità, duraturi nel tempo e adatti a diverse situazioni, grazie all'utilizzo di materiali di alta qualità e alla cura dei dettagli nella progettazione. L'articolo presenta alcuni dei modelli più importanti e rappresentativi del marchio, tra cui il Benchmade Griptilian, il Benchmade Bugout e il Benchmade 940.
Inoltre, viene messo in evidenza il ruolo di Coltellera Collini come distributore ufficiale di Benchmade in Italia, garantendo ai clienti italiani un servizio clienti esperto e competente, oltre a un servizio di personalizzazione delle lame attraverso l'incisione a laser. Questo permette agli acquirenti di personalizzare i propri coltelli Benchmade per renderli unici e adatti alle proprie esigenze e preferenze.
Read more »

Essential

Marketing

Google Analytics

Fallkniven

Recent Blog Posts