Flashlights and Lamps

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Models: LYL-XDTD
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

Portable Generator / Power Station from 150W up to peaks of 300W and 54600mAh with multifunction LCD screen.
Rechargeable either through an electrical outlet (AC) or via a solar panel (available separately).

Designed for electrical emergencies, hiking, photography, camping or simply to create a small portable office on vacation, by the sea or by the pool or in places without electricity.

It allows you to power PCs, headlights, spotlights, LED lamps, printers, monitors, televisions, projectors, small refrigerators in real time and to recharge smartphones, tablets, drones, cameras and e-book readers.

Light (3.35kg) and compact (20.9x15.6x13.7cm), it is very easy to store and transport thanks to the ergonomic folding handle.

Ready for adventure! The internal battery pack is in fact mounted on an ABS shell that absorbs three-dimensionally shocks and impacts both during transport and during use on the move.

TECHNICAL SPECIFICATIONS:
Model: NPS200
Cells: 18650 Li-ion batteries
Capacity: 196.56Wh (10.8V, 18.2Ah) (54600mAh)
DC Input: 14.4V-26V, up to 10A (160W max)
Temperatures: -10 ~ 40 ℃ (14 ~ 104 ℉)
Dimensions: 209mm x 156.3mm x 137.3mm (8.23 "x 6.15" x 5.41 ")
Weight: 3.35kg (7.39lbs)

OUTPUT:
AC: 220V ~ 0.68A 50Hz 150W, 300W peak
Cigarette lighter: 12V⎓10A + DC Output: Total 120W max
DC: 12V⎓10A
USB: 5V⎓2.4A 12W max each port
USB QC: 5V⎓2.4A / 9V⎓2A 18W max
USB-C: 5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3A 60W max

ACCESSORIES INCLUDED:
AC adapter
Power cord

RECHARGING TIMES:
With 100W solar panel: Min.2h.
With AC adapter: Min. 4h.

COMPATIBLE DEVICES:
AC outlet: Laptops, monitors, televisions etc.
USB socket: Smartphones, Cameras, Tablets, E-Book Readers etc.
Cigarette lighter socket: Car charger, LED lights, small refrigerators, 12V compatible accessories.

APPROXIMATE DURATION OF USE:
12V / 5W LED lights: about 35h. ongoing
32 "TV: about 3h. Continuous
Recharge a Laptop: about 3 times
Reloading a Drone: about 4 times
Recharge an iPhone 11: about 15 times

NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.

Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.

Type of production: industrial
Country of production: China

Functions:

* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriver

Material: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5g

Key Features:
* Ultra-light Powerbank with a capacity of 10000 mAh
* Frame and panels in carbon fiber
* Dual USB and USBC output channels
* LED residual power level indicator
* Low current charging mode for delicate electronics (eg Smartwatch, TWS headphones etc.)
* It weighs only 150 grams; it is 40% lighter than a traditional 10,000mAh powerbank

Never let your phone or flashlight die! The Nitecore NB10000 power bank has an extraordinary 10,000 mAh battery capable of charging three times an iPhone 11 or a Samsung s10. Embodying all this power in a solid carbon fiber frame, the NB10000 is 40% lighter than traditional power banks, while it is smaller and thinner than a phone, with an elegant modern and minimalist design. NB10000 is the ultimate portable backup charger for road warriors, outdoor enthusiasts who love track racing, hiking and camping or first responders who are on an extended search and rescue mission. It is also a great addition to your emergency preparation kit.

Dual USB / USB-C Quick Charge output ports allow you to quickly charge two devices simultaneously with maximum compatibility with all electronic devices. When fast charging is not required, NB10000 has a low current mode for delicate devices such as bluetooth headphones and smart watches.

The carbon fiber outer panel makes NB10000 highly resistant to damage, abrasion and impact. In addition, NB10000 is water resistant with IPX5 protection rating and comes with a series of short circuit, overload and overheat protections.

Technical specifications:
* Capacity: 10000mAh / 3.85V / 38.5Wh
* Dimensions: Length 12.19cm x Width 5.9cm x Height 1.06cm
* Weight: 150g
* USB-C input: 5V-2.4A / 9V-2A
* Output 1 USB-C: 5V-3A / 9V-2A / 12V-1.5A
* Output 2 USB-A: 5V-3A / 9V-2A / 12V-1.5A

Led: Luminus SBT-90 GEN2 with a life cycle of 50,000 hours
Operating Modes: 4 light powers and 3 special modes electronically regulated
Powers and Durations: 5200 Lumens (1.30 * h.) -> 2000 Lumens (4h.) -> 800 Lumens (10h.) -> 200 Lumens (36h.) -> Strobo -> S.O.S. -> Beacon
Power peak: 562500 candles
Maximum illumination distance: 1500m. (1.5km)
Ignition method: Front multifunction button
Light selection method: Front multifunction button
Head: aeronautical aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: NBP68HD rechargeable battery pack (98Wh - 3.7V) rechargeable at 2A or 4A
Measurements: 27.6cm (L) - 5.0cm (D stem) - 9.0cm (D head)
Weight: 1361g. - with battery pack inserted
Accessories: Electric charger (3.5mm), Shoulder strap, Wrist strap, Spare O-ring, Spare plug for charging socket
Waterproofing: as per IP68 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1m in height
Notes: Integrated OLED display to view the type of mode selected, the residual voltage, the centigrade degrees of the LED and further information

The reported data were measured according to the international test standard ANSI / PLATO FL 1-2019 using the NBP68HD battery pack under laboratory conditions. The data may vary slightly in actual conditions of use due to usage habits and environmental factors. * The duration of the TURBO mode is tested without the temperature regulation system starting.

KEY FEATURES:

* Uses a CREE XP-L2 V6 LED with a maximum output power of 1,100 lumens
* Maximum light intensity of 10.150cd and maximum range of 201 meters
* Glass and parabola with anti-reflective treatments, crystal coating and with PDOT (Precision Digital Optics Technology)
* High efficiency circuits to allow constant light up to 55 continuous hours
* STROBE READY technology that enables immediate access to the STROBO light (Patent No .: ZL201320545349.4)
* Three different user modes easily selectable
* Integrated power indicator on the tang indicating the remaining battery charge (Patent No. ZL201220057767.4)
* Battery anti-impact mechanism, with reverse polarity protection, designed for use together with firearms (Patent No. ZL201220677948.7)
* Stainless steel clip with titanium finish
* Optical type lenses with anti-scratch cover on both sides
* Made of aviation aluminum alloy
* Anodizing with military grade HA III finish
* Waterproof as per IP68 standard (Submersible up to 2 meters deep)
* Withstands impacts up to 1 meter in height

TECHNICAL FEATURES:

Led: 1x Cree XP-L2 V6 - with a life cycle of 50,000 hours
Operating Modes: 5, electronically regulated
Powers and Durations with 1x 18650: 1000 Lumens (3h.) -> 370 Lumens (7h.) -> 200 Lumens (18h.) -> 60 Lumens (55h.) -> Strobe
Power peak with 1x 18650: 9780 candles
Powers and Durations with 2x CR123: 1100 Lumens (1h.) -> 370 Lumens (2h.) -> 200 Lumens (3h.) -> 60 Lumens (14h.) -> Strobe
Power peak with 2x CR123: 10150 candles
Maximum illumination distance: 201m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear button "Mode" for immediate access to the strobe function, which remains active as long as the button remains pressed
Light selection method: With the flashlight on, pressing the "Mode" rear button
Head: aeronautical aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries (sold separately): works with a 18650 3.7V rechargeable battery or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries
Measurements: 14.8cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 95g. batteries excluded
Accessories: NTH10 tactical sheath, clip, wrist strap, spare O-ring, battery holder for CR123
Waterproofing: as per IPX68 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1.5m in height

The reported data of durations and powers have been measured in accordance with the international standard ANSI / PLATO FL1-2019 using 1x rechargeable Li-ion battery (3500mAh) or 2x disposable CR123A batteries (about 1700mAh in total) in laboratory conditions. The data may vary slightly in actual use conditions due to the type of batteries, usage habits and environmental factors.

KEY FEATURES:

* Second generation metal keychain torch
* Uses 2 CREE XP-G3 S3 LEDs capable of producing a maximum light of 720 lumens
* Maximum peak intensity of 2.160cd and maximum illumination distance of 93 meters
* Light and solid body, made with CNC machining
* Uses totally transparent optical lenses to ensure a uniform and well distributed light
* Built-in Li-ion battery with 500mAh capacity
* Integrated Li-ion battery charging system via Micro-USB plug
* APC technology (Advanced Power Cut-Off) to reduce consumption to a minimum without being used
* High efficiency circuits to ensure continuous lighting up to 55 hours
* 2 operating modes available (DEMO Mode and DAILY Mode)
* Easy and practical to use: operation via two different control buttons
* 4 selectable brightness levels with direct access to TURBO mode
* Stores the last light mode selected by the user
* The power indicator indicates the remaining battery charge - Patent No. ZL201220057767.4
* Built-in ATR system (Advanced Temperature Regulation) - Patent No. ZL201510534543.6
* HA III type anodized finish
* Rear magnet to hook the torch to metal surfaces
* Water resistant as per IP67 standard and impacts up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 2x CREE XP-G3 S3 with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the appropriate dedicated button
Powers and Durations: 720 Lumens (15min.) -> 200 Lumens (1h and 15min.) -> 30 Lumens (8h.) -> 1 Lumen (55h.)
Peak power: 2160 candles
Maximum illumination distance: 93m.
Ignition method: On and off button
Light selection method: Light selection button
Body: aeronautical aluminum with HA III anodization degree
Battery: 500mAh Li-Ion, integrated, with integrated MicroUSB charging system
Measurements: 6.26cm (length) - 2.69cm (width,) - 1.34cm (thickness)
Weight: 38.3g. - battery included, plastic clip not included
Accessories: stainless steel ring and snap hook
Waterproof: as per IP67 standard
Impact resistance: withstands falls from 1m in height
Notes: Rear magnet for attaching the torch to metal surfaces - Equipped with integrated charging system via MicroUSB port (cable not included in the package); during recharging, an integrated LED will flash showing the charge status and will remain lit steadily upon recharging complete.

Real power and durability, certified in the laboratory by ANSI / NEMA FL1 standard

KEY FEATURES
* Uses 4 x CREE XP-G3 S3 LEDs with a maximum output power of 2,700 lumens
* Light and robust torch body with CNC machining, with excellent heat dissipation capabilities
* Uses a micro-blasted reflective parabola to guarantee a uniform and diffused light
* Maximum light intensity of 4,500cd and maximum range of 134 meters
* Powered by a high-capacity 21700 Li-ion battery that is compatible with both 18650 and CR123 batteries to allow constant light up to 1,200 hours
* A single power and selection button that controls 5 brightness levels and 3 special modes
* Integrated charging circuits for Li-ion batteries via Micro-USB port
* NITECORE 21700 Li-ion rechargeable battery (NL2140HP 4,000mAh) included
* STROBO mode constantly changes frequency randomly, to maximize disorientation effects * Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the battery inserted, with a minimum voltage deviation (± 0.1V)
* Wide 100 ° lighting angle, designed specifically for hiking activities
* ATR (Advanced Temperature Regulation) technology for temperature regulation (Patent N ° ZL201510534543.6)
* Elastic front band included, light and breathable
* Electronic protection against battery polarity reversal
* Built in solid aeronautical aluminum alloy
* Robust HAIII type anodization with military specifications
* Immersible as per IPX8 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height
* Flat, magnetic rear shank, to keep the torch standing or anchored to metal surfaces

TECHNICAL DATA:
LED: 4x Cree XP-G3 S3 with 50,000 hour life cycle
Output 5 constant light outputs, digitally regulated + 3 special modes
1 lumens (1200h.) -> 40 lumens (52h.) -> 270 lumens (8h. And 15min.) -> 800 lumens (3h.) -> 2700 lumens (45min.) + Strobe, Beacon and SOS
Capacity: up to 134mt.
Peak power: 4500 candles
Battery (included): 1x IMR 21700 rechargeable (NL2140HP 3.6V, 14.4Wh, discharge 15A); if necessary it can also work with 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V without being able to reach 2700 lumens of power
Torch size: 128.2x26x28.3mm.
Weight: 100g (only torch, without batteries, elastic band and frontal support)
Lens: in micro-blasted hardened glass
Body: in aeronautical aluminum
Finish: anodized, Type III
Belt: elastic, adjustable in diameter and in height, with silicone coupling
Notes: water resistant as per standard IP68, submersible at 2mt. of depth for 30min. - Magnetic rear cap to hook it independently to any metal surface.
Included accessories: USB charging cable, clip, elastic front band, front support, wrist strap, spare o-ring

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x Red LED + 1x Blue LED
Operating Modes: 4 light powers, selectable with the specific dedicated button + Red Light + Blue Light + Flashing Red / Blue
Power and Durability: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> Red Light -> Blue Light -> Red / Blue Flashing
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m in height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional red light - Additional blue light

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

The UI1 charger is pocket-sized, fast and powerful; can automatically identify what type of lithium battery you have inserted and independently applies the correct charging voltage and the correct voltage. The optical charging system helps to keep everything under control by indicating both the percentage of charge reached and the charge finished. Very simple to use: just insert the battery, take care of everything else.

Features:
* Charges 1 cylindrical Li / Ion / IMR battery
* Automatic identification of the type of battery inserted
* Automatic voltage identification
* Automatic identification of the type of charge (CC, CV and TC)
* LED to monitor charging progress
* Automatic shutdown of the charge upon completion
* Protection against reverse polarity
* Optimal heat dissipation
* Can be used with any USB / MicroUSB cable (including packaging)
* CE and RoHS certifications

Technical specifications:
* Input voltage: 5V / 1A 5W
* Output voltage: 4.2V
* Current output: 1000mA
* Dimensions: 122.5x29.2x32mm.
* Weight without batteries: 40.5g.
* Compatible with IMR / Li-Ion batteries: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500,17650 , 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500, 26650

Precautions:
* Do not recharge different types of batteries other than those indicated
* Do not leave batteries unattended during recharging operations
* With the batteries charged, remove the batteries from the charger to prevent the batteries from discharging

ATTENTION: the batteries shown in the photos are not included.

QUICK DESCRIPTION:
2020 news from the Nitecore Explorer series. Very pocket-sized and made with an unibody aluminum design that in just 11 centimeters allows to host a 21700 5000mAh battery already supplied in the package and offers 4400 lumens of power for a lighting distance of 211 meters. The battery life is surprising, which allows very long continuous use of the flashlight at medium to high powers.

WHY CHOOSE IT:
Extremely small, compact, but very powerful with its maximum 4400 lumens - Excellent for urban, residential and daily use - Wide light with strong spill - Convenient on / off and light selection system that allows you to operate with one hand and without changing socket - Important battery life supplied with the torch which allows over 3 constant hours at 1050 lumens and over 45 constant hours at 50 lumens.

TECHNICAL DESCRIPTION:
Led: 4x Cree XP-L2 V6 - with a life cycle of 50,000 hours
Operating Modes: 8, electronically regulated
Powers and Durations: 4400 Lumens (0.5h) -> 1050 Lumens (3.15h) -> 320 Lumens (7.30h) -> 50 Lumens (45h.) -> 2 Lumen (700h.) -> Strobo -> SOS -> Location Beacon
Peak of Power: 11100 candles
Maximum illumination distance: 211m.
Ignition method: Front button, located under the head
Light selection method: Front button, located under the head
Head and body: aircraft aluminum unibody
Finish: anodized, Type III
Lens: hardened glass, ultra transparent, with anti-reflective treatment
Battery: included 1x Li-ion 21700 3.6V 5000mAh rechargeable via integrated USB Type-C plug - if necessary it can also work with 1x 18650 or 2xC R123 3.0 / 3.6 / 3.7V using the battery holder included in the package
Measurements: 11.7 cm (Length) - 2.86 cm (Head diameter) - 2.58cm (Stem diameter)
Weight: 80g. without batteries
Accessories: NL2150HPR battery, USB cable for charging, wrist strap, belt sheath, clip, spare O-ring
Waterproofing: as per IP68 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1m in height
Note: blue LED located under the power button indicating the battery charge status

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x Li-ion 21700 3.6V 5000mAh - in different conditions of use or using different batteries, data may vary
Invia commenti
Cronologia
Salvate
Community

Model: MP25
Type: modular backpack
Capacity: 25L
Dimensions: 50 x 27 x 17 cm
Auxiliary compartment: suitable for 14 "laptop / tablet
Weight: 1.5 kg
Available colors: black

Technical features

- Premium YKK zippers
- Innovative cable holes designed on both sides
- Integrated laptop / tablet compartment
- UTX Duraflex buckles
- MOLLE system with laser cut for modular extensions
- Designed for commuters, hikers
- 500D nylon fabric resistant to wear and water
- 25 liter main compartment with full opening
- Interior design with a combination of ring surface and MOLLE system

HUNTING KIT

the set includes:

- Nitecore NEW P30 torch

- RSW3 remote connection

- Magnetic attack

Technical data of the torch

KEY FEATURES:

* Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months
* Charging system integrated in the Li-ion batteries via USB Type C port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Uses a Cree XP-L HI V3 LED for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 21700 3.6V 5000mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated + Strobe, S.O.S. and Beacon
Powers and Durations: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Power peak: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear button
Light selection method: Front button
Head: aviation aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: included 1x 21700 with USB Type C direct charging - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head) - 2.72 (D. tail)
Weight: 158g. - batteries excluded
Accessories included: Clip, Wrist strap, Spare O-ring, Spare back button, Adapter for 18650 / CR123 batteries, Sheath
Waterproofing: as per IPX-8 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1.5m in height

KEY FEATURES

* Uses 1 x CREE XP-L2 V6 LED with a maximum output power of 1,100 lumens
* Lightweight and robust torch body, CNC machined, with excellent heat dissipation capabilities
* The torch is made up of a double reflective parabola (front and rear) which guarantees a dual lighting possibility;

Main parabola CREE XP-L2 V6 LED cold light (5700K) of 1100 lumnes and 80 meters of maximum depth
Secondary parabola CREE XP-L V6 warm light LED (3000K) with 920 lumens and 117 meters of maximum depth

* Maximum light intensity of 1,600cd and maximum range of 80 meters
* Powered with both 18650 and CR123 batteries
* Double power button and selection of the parabola to use and possibility of variation of 4 brightness levels and 2 special modes per parabola
* The integrated potentiometer can also indicate the residual voltage of the inserted battery, with a minimum voltage deviation (± 0.1V)
* Large lighting angle at 100 °, specially designed for hiking activities
* ATR (Advanced Temperature Regulation) technology for temperature regulation (Patent N ° ZL201510534543.6)
* Elastic band included, light and breathable
* Electronic protection against reverse polarity of the battery
* Built in solid aeronautical aluminum alloy
* Robust HAIII type anodizing with military specifications
* Submersible as per IPX8 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

LED PARABLE: 1 x CREE XP-L2 V6 cold light LED (5700K) with 50,000 hours life cycle
Output 4 constant light outputs, digitally regulated + 2 special modes
70 lumens (18h.) -> 200 lumens (8h.) -> 410 lumens (3h. And 45min.) -> 1100 lumens (1h. And 30min.) + Strobe, SOS
Range: up to 80mt.
Power peak: 1600 candles

LED PARABLE: 2 x CREE XP-L V6 warm light LED (3000K) with 50,000 hours life cycle
Output 4 constant light outputs, digitally regulated + 2 special modes
60 lumens (18h.) -> 170 lumens (8h.) -> 370 lumens (3h. And 45min.) -> 920 lumens (1h. And 30min.) + Strobe, SOS
Range: up to 117mt.
Power peak: 3460 candles

Battery (excluded): 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V
Torch dimensions: 95.9x27.6x25.3mm.
Weight: 82.5g (torch only, without batteries, elastic band and support for front use)
Lens: in hardened shot-peened glass
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height, with silicone hook
Notes: water resistant as per IP68 standard, submersible at 2mt. depth for 30min.

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m. of height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRI

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

WHY CHOOSE IT:

Hiking, tactical and military use - Abundant light output - Compact dimensions - Convenience of the integrated USB type C charging system - Light with strong spill (very common) - Practicality and immediacy of the light selection commands.

KEY FEATURES:

* Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months
* Integrated charging system for Li-ion 21700 batteries via Micro-USB type C port on the tang
* 5000mAh rechargeable NITECORE 21700 battery included in the package
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,400 lumens
* Maximum light intensity in the central point of 13300cd. and maximum range of 230 meters
* Glasses and parables with anti-reflective treatments, crystal coating and with PDOT (Precision Digital Optics Technology)
* Integrated potentiometer with indicator light indicating the remaining charge and residual battery voltage
* Built in solid aeronautical aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 21700 of 5000mAh - in different conditions of use or using different batteries, data may vary

Led: 4x CREE XP-L2 V6 - with a life cycle of 50,000 hours
Operating Modes: 5, electronically regulated + STROBO
Powers and Durations: 4400 lumens (30min) -> 1100 lumens (2h 15min) -> 330 Lumens (7h 45min) -> 50 Lumens (40h) -> 2 Lumens (380h) -> Strobo 4400 Lumens
Power peak: 13300 candles
Maximum illumination distance: 230m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear button "Mode" to immediately access the strobe function, which remains active as long as the button remains pressed
Light selection method: With the flashlight on, pressing the "Mode" rear button
Head: aeronautical aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: works with a NL2150HPi 3.6V 15A rechargeable battery (included in the package). If necessary, it can also work with 2x CR123 / RCR 3.0 / 3.7V without however being able to reach 4400 lumens of power
Measurements: 15.9cm (L) - 2.54cm (D stem) - 3.26cm (D head)
Weight: 135g. batteries excluded
Accessories included: NITECORE 21700 rechargeable lithium-ion battery (NL2150HPi 5,000 mAh), USB-C charging cable, clip, wrist strap, spare o-ring, battery holder for CR123
Waterproofing: as per IPX-8 standard, submersible up to 2mt. depth for 30min.
Sheath: NTH20 tactical sheath, compatible with soft attacks
Impact resistance: withstands drops from 1m. in height

Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months

WHY CHOOSE IT:

Hunting / scouting use - Remarkable illumination depth 618m - Convenient charging system integrated in the battery - High autonomy thanks to the new 5000 mAh 21700 battery - Practicality and immediacy of the light selection controls.

KEY FEATURES:

* Italian Guarantee Nitecore Italy: Torch guaranteed 5 years - Battery guaranteed 12 months
* Charging system integrated in the Li-ion battery via Micro-USB port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Use a Cree XP-L HI V3 for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with anodized military specifications
* IP68 waterproof and submersible (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7 3400mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically adjusted + Strobo, S.O.S. and Beacon
Power and Durability: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Peak power: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear Button
Bright selection method: Front Button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: 21700 with micro-usb direct charging included in the package - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head)
Weight: 158g. - batteries excluded
Accessories: clip, wrist strap, belt cordura sheath, spare o-ring, anti-roll ring
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1.5m in height

Led: 9x CREE XP-L HD V6 - with a life cycle of 50,000 hours
Operating Modes: 5, electronically adjusted + STROBO mode
Powers and Durations: 9500 lumens (turbo) -> 1900 lumens (3h) -> 460 Lumens (4h 30min) -> 130 Lumens (14h) -> 30 Lumens (60h) -> Strobo 9500 lumens
Peak power: 18000 candles
Maximum illumination distance: 268m.
Ignition method: Rear Button with "Momentary On" system for luminous signals and Rear "Mode" Button for immediate access to the TURBO function, which remains active until the button is pressed
Light selection method: With the torch on, pressing the rear "Mode" button which, if pressed twice, activates the Strobe mode
Head and Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Battery: works with a built-in, non-removable, 21700 5000mAh rechargeable battery
Measurements: 12.5cm (L) - 2.6cm (D stem) - 4.0cm (D head)
Weight: 218g. battery included
Accessories: clip, wrist strap, sheath, USB type C charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1m in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standard using the integrated 5000mAh 21700 battery - in different conditions of use the data may vary

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GTS, MH25GTS, P12GTS

Red filter made of ultra-transparent hardened glass with rubber body, so that it can be adapted to different types of torches with 70mm diameter heads.

This filter transforms the beam of your torch into excellent red light to be used together with night vision devices and suitable for not frightening animals. Also suitable for tactical reading of maps and various documentation.

Compatibility: only for NITECORE MH40GTR

The Nitecore UA55 is a USB to AC power adapter with a full house of five bays for concurrent charging. No more fighting over the charger - this adapter is great for the household, family vacation, or on-the-go businessperson.

The intelligent management system will be able to detect the current charging of the attached device, up to a jaw-dropping 10A output current (2A per port).

The UA55 is compatible with smartphones, watches, cameras, tablets, game consoles, flashlights and more!

Input: 100-240V ~ 50 / 60Hz 1.5A (MAX)
Output: 5V / 10A (2A MAX Per Port) 50W MAX
Dimensions: 97.3mm × 68.4mm × 28.3mm (3.83 "× 2.69" × 1.11 ")
Weight: 178.5g (6.3oz)

power and durability certified by ANSI / NEMA FL1 standard using 1x 18650 Li-Ion 3.7V 3400mAh - under different conditions of use or using different batteries, data may vary

Led: 1x CREE XP-L HI V3 LED with a life cycle of 50,000 hours
Operating Modes: 2 white light power, 2 red light power and 1 strobe all electronically controlled
Power and Duration: White Light: 1000 Lumens (1.15h.) -> 385 Lumens (4h.) -> Strobe - Red Light: 115 Lumens (4.15h.) -> 55 Lumens (9h.)
Power peak: 12400 candles
Maximum illumination distance: 223m.
Power method: Multifunctional front button
Light Selection Method: Multifunctional front button
Head: Aeronautical aluminum
Body: Aeronautical aluminum
Finish: anodized, Type III, with anticorrosion treatment to withstand brackish water
Lens: Ultra-hardened hardened glass with anti-reflection treatment
Battery: (sold separately) 1x Li-Ion / IMR 18650 rechargeable 3.6 / 3.7V or 2x CR123 3.0V
Measurements: 13.3cm (L) - cm (D stem) - cm (head D)
Weight: 143g. - Batteries not included
Impact Resistance: Resists to 1.5m high falls
Waterproof: as standard IPX-8, immersible up to 30m. of depth
Notes: Torch conceived for underwater use up to depth of 30m. - Includes a front pocket diving pointer in the flashlight, a wrist strap and two spare o-rings.

Useful, compact, light and powerful, this new Nitecore product designed for signaling has 4 intermittent lights + a special mode. Thanks to its small size, it is perfect for tactical and hiking uses, but also urban ones such as cycling, walking, applying to pets or running.

KEY FEATURES:
* Uses 4 high efficiency LEDs
* Possibility of flashing in 4 different colors and in red / blue to simulate the flashing of the American Police
* Powered by an integrated Li-ion battery that allows up to 18 hours of autonomy
* Integrated charging system for Li-ion battery, via Micro-USB port
* One-hand operation of the torch, with a single button
* An indicator light in the torch indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight inculcated bracket, with Velcro hooks on the back
* Made of robust and quality plastic materials
* Extremely lightweight and pocket-sized design
* Resists impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:
Led: 4x high-power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 4 colored flashes and a special mode (blue / red light police warning)
Powers and Durations: Red (12 Lumens / 15h.) - Green (17 Lumens / 15h.) - Blue (2 Lumens / 15h.) - White (20 Lumens / 18h.)
Ignition and selection method: Central button for switching on, switching off and light selection
Body: thermoplastic materials
Battery: integrated, non-removable, 120mAh Li-Ion, rechargeable via MicroUSB plug
Torch measurements with bracket: 6.73cm (Length) - 3.4cm (Width,) - 2.59cm (Thickness)
Torch weight: 10.5g.
Weight with bracket: 22g.
Accessories: support bracket with hooks for front and rear Velcro - USB charging cable
Waterproof: as per IP66 standard
Impact resistance: withstands falls from 1m in height
Note: -

Real power and durability, certified in the laboratory by ANSI / NEMA FL1 standard

KEY FEATURES:
* Uses a CREE XP-G2 S3 LED LED with a maximum output power of 250 lumens
* Uses optical lenses with microsphere surfaces to produce a uniform and diffused light
* Powered by 2 AA-type batteries that guarantee a maximum autonomy of up to 130 hours
* Peak of maximum light intensity of 800cd and maximum illumination distance of 56 meters
* The power button controls 3 brightness levels and 1 special mode
* Integrated protection against battery polarity reversal
* High efficiency constant circuit which guarantees a stable and continuous brightness
* Wide range angular lighting system up to 70 °
* Made of quality, robust and durable plastic materials
* Ultra light and portable design
* Water resistant and submersible as per IPX8 standard (up to 2 meters deep)
* Resists impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:
LED: 1x Cree XP-G2 S3 with 50,000 hour life cycle
Output 3 constant light outputs, digitally regulated and a signaling mode (Beacon)
Power and duration: 250 lumens (3h.30min.) -> 65 lumens (17h.) -> 2 lumens (130h.) -> Beacon
Range: up to 56m.
Peak power: 800 candles
Usable batteries: 2x AA type 1.2 / 1.5V batteries (included in the package)
Torch size: 70.8x42.3x38mm. (with support included)
Weight: 80g (with support and elastic band included - batteries not included)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Belt: elastic, adjustable in diameter and in height
Notes: water resistant as per standard IP68, submersible at 2mt. of depth for 30min.
Accessories: elastic strap - front support

Real power and durability, certified by ANSI / NEMA FL1 standards made with laboratory tests

NITECORE NTP40 At-A-Glance
- Smooth and clear writing is ideal for cartooning, sketching, and daily writing
- Lightweight compact design for everyday carry
- Anti-sliding thread prevents sliding and reduces fatigue
- Streamlined clip for carrying on your pocket, shirt, or backpack
- Body constructed from titanium alloy
- Impact and corrosion resistant
- Included in the Box

NITECORE NTP40 mechanical pencil
High Quality Titanium Alloy Pencil - NITECORE releases the ultimate all-purpose writing utensil, the NITECORE NTP40 titanium alloy mechanical pencil. The NTP40 is designed with an artistic round chamber, housing the German Schmidt Feinminen System and an abrasion resistant crystallized cap. For writing, the 0.5mm lead of the NTP40 offers smooth and clear writing while sketching and daily writing outdoors

Robust and Premium Build
With exquisite craftsmanship, the NTP40 mechanical pencil is constructed from TC4 titanium alloy that offers lightweight ruggedness with an excellent resistance to impact and corrosion. The NTP40 is designed to be used outdoors and is perfect to withstand harsh conditions.

Designed for Everyday Carry
Designed to be comfortable, the body of the NTP40 has 26 loops of anti-skid threads in the center which increases friction and prevents sliding. A rigid hollowed clip allows you to easily attach the pencil to your pocket, shirt, or backpack to avoid the loss of the pencil. Weighing only 0.84 ounces and measuring less than 6 inches in length, the sleek NTP40 is the perfect addition to your EDC gear.

TECHNICAL SPECIFICATIONS
Body Material Titanium Alloy TC4
Length 5.4 inches
Diameter 0.35 inches
Mechanism Type Schmidt Feinminen System
Lead Refill 0.5mm
Dimensions L-5.4"xW-0.35"xH-0.35"
Weight 0.84oz

Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.

* Weight: 25g
* Total length: 142mm.
* Material: aluminum alloy
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Fisher PR4 refill. Writes at temperatures from -35 ° to over 120 °, underwater, on dirty and oily surfaces, lasts 15 times longer than a normal non-pressurized refill, can draw a continuous line of 14 km thanks to the special thixotropic ink, from semi-solid consistency, which is made fluid by the special tungsten sphere.

Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for self defense with "sliding shutter" grafting system.

* Weight: 30g
* Total length: 133mm.
* Material: titanium
* Diameter: 9.3 mm.
* Glass breaking tip: tungsten steel
* Ink: black with Fisher PR4 refill. Writes at temperatures from -35 ° to over 120 °, under water, on dirty and oily surfaces, lasts 15 times longer than a normal non-pressurized refill, can draw a continuous line of 14 km thanks to the special thixotropic ink, from semi-solid consistency, which is made fluid by the special tungsten sphere.

IMPORTANTE: questa batteria non è una comune batteria formata da 2xCR12A da 3V e non può essere utilizzata in apparecchi che utilizzano batterie CR123A poichè ha un diametro differente. Richiede inoltre un apposito caricabatterie per essere ricaricata e non possono essere utilizzati normali caricabatterie per batterie di tipo Ni-Mh o Li-Ion. Non ci riteniamo responsabili in caso di utilizzo errato delle batterie, di uso a polarità invertite, di errori in fase di ricarica o di eventuali danni su apparecchiature non idonee al funzionamento con queste batterie.

CARATTERISTICHE BATTERIA

* Batteria ricaricabile Li-Ion 18650 cilindrica
* Voltaggio nominale: 3.6V
* Capacità: 3500mAh - 8A
* Polo Positivo: Sporgente
* Circuito di protezione PCB per la protezione interna del voltaggio
* La protezione PCB previene i sottovoltaggi a 2.5V e i sovravoltaggi a 4.25V
PRECAUZIONI BATTERIA

* Non lasciare incustodite le batterie durante la fase di carica * Non ricaricare sopra tappeti, tavoli in legno o materiali infiammabili
* Non siamo responsabili per danni derivati dalla manomissione delle batterie
* Non siamo responsabili per un uso incorretto o con polarità invertite delle batterie

SPECIFICHE TECNICHE BATTERIA:

* Capacità: 3500mAh nominali
* Dimensioni: 18+/-0.2 mm diametro x 66+/- 0.2mm altezza
* Peso approssimativo: 47g
* Voltaggio nominale medio: 3.6V
* Voltaggio di picco: 4.2V
* Potenza: 8A
* Cicli vitali: > oltre i 500 cicli

IDEALE PER I SEGUENTI MODELLI NITECORE:
CONCEPT 1 - EC23 - HC33 - MH12GTS - MH23 - MH25GTS

Led: 1x Cree XHP35 HD - with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes all electronically regulated
Powers and Durations: 1800 Lumens (0.5h) -> 950 Lumens (2.15h) -> 240 Lumens (5.45h) -> 70 Lumens (19h) -> 1 Lumens (250h.) -> Strobo -> Beacon -> S.O.S.
Power peak: 23100 candles
Maximum illumination distance: 304m.
Ignition method: Rear button with "Momentary On" system for luminous signals
Light selection method: Front button located under the head
Head: aeronautical aluminum
Body: aeronautical aluminum
Finishing: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective coating
Battery: included in the package, 1x Li-ion 18650 rechargeable from 3.7V, 8A, 3500mAh - If necessary can also work with 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V without being able to reach 1800 lumens of power
Measurements: 15cm (L) - 2.54cm (D stem) - 3.4cm (D head) - 2.60cm (D shank)
Weight: 124g. without the battery inserted
Accessories: wrist strap, belt cordura sheath, spare o-ring, clip, removable tactical ring, USB / Micro-USB charging cable, NL1835HP battery
Waterproofing: as per IP68 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1m in height
Italian Nitecore Italia Warranty: 5 year guaranteed torch - 12 month guaranteed battery

Powers and durations certified in laboratory by ANSI / NEMA FL1 standard using 1x Li-ion18650 3.7V 3500mAh - in different conditions of use or using different batteries, data may vary

NOTE: The helmet shown in the pictures is for display purposes only and is not included with the product

Led: 1x Cree XP-G3 S3 with a life cycle of 50,000 hours and with a lighting diameter of 100 ° - 2x CRI> 90 with white light (19 Lumens x 25h.) - 2x auxiliary LEDs with red light (9 Lumens x 38h .)
Operating Modes: 4 light powers, selectable with the dedicated dedicated button and 2 signaling modes
Powers and Durations: 550 Lumens (1h.) -> 190 Lumens (17h.) -> 33 Lumens (50h.) -> 1 Lumen (330h.) -> S.O.S. -> Beacon Light
Power peak: 3900 candles
Maximum illumination distance: 125m.
Ignition and selection method luminsa: Two power-on, power-off and selection buttons; one for white light and one for red light
Body: ABS
Batteries: 3.7V and 1800mAh integrated Li-Ion, not removable, equipped with integrated MicroUSB charging system
Measurements: 6.3cm (Length) - 4.3cm (Width) - 3.1cm (Thickness with front support)
Weight: 99.5g. - battery included
Accessories: front elastic band - USB / MicroUSB charging cable
Waterproofing: as per standard IP67, submersible up to 1m depth
Impact resistance: withstands drops from 1.5m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable included in the package); when charging, an integrated LED underneath the buttons will show the status and switch off automatically when the charging is completed. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The torch lens allows to illuminate at 100 ° amplitude. The tilt adjustment system allows you to lower the torch up to 60 ° - the torch can be powered via the USB cable while remaining on, so you have constant lighting when needed - the 550 Lumens Turbo mode is automatically lowered to 190 Lumens to allow the LED to cool, then return to produce 550 Lumens.

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Key Features

It uses 6 LED CREE XHP35 HD LEDs to produce a maximum brightness of 10,000 lumens
Maximum light intensity of 20,000 candles and lighting up to 288 meters
Made with a monoblock body machined with numerical control so as to be light, sturdy and to better dissipate the heat generated.
Multi-function OLED display for real-time information on Lumens, voltage, LED temperature and remaining battery time.
Built-in rechargeable, non-removable, Li-ion, type 21700 from 4,800mAh.
Intelligent charging ICs to better manage the battery.
High efficiency circuits to allow a constant light up to a maximum of 200 continuous hours.
It can be controlled by two separate buttons for switching on and for selecting the various operating modes and the 5 levels of light intensity. Additional button on the shank.
High brightness level programmable according to your needs (between 400 and 2000 lumens)
Glass and parabolas with anti-reflection treatment, crystal coating and PDOT (Precision Digital Optics Technology).
Made of aeronautical aluminum alloy.
Abrasion resistant ANOD III anodization with military specifications.
Immersible as per IP68 specifications (up to 2m depth for 30min).
Resistant to impacts and falls up to a maximum of 1m. of height.
Possibility to be positioned vertically, like a candle.

--------------------------------------------------------------------------------------

powers and durations certified in the laboratory by ANSI / NEMA FL1 standards - in different conditions of use or using different batteries, data may vary

Led: 6x Cree XHP-35 HI with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated light powers
Powers and Durations with IMR battery (included): 10000 Lumens (-) -> 1000 Lumens (2h.) -> 300 Lumens (7h.) -> 100 Lumens (14h.) -> 5 Lumens (200h.) -> Strobe -> SOS -> Beacon
Peak of power: 20000 candles
Maximum illumination distance: 288m.
Ignition method: Rear button or multi-function front button
Light selection method: Multi-function front button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finishing: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective coating
Battery: rechargeable, integrated, non-removable - 1x IMR21700 3.6V 4800mAh
Measurements: 11cm (L) - 4.1cm (L stem) - 3.1cm (S stem)
Weight: 246.5g. - batteries not included
Accessories: wrist strap, nylon sheath, charging cable, removable clip (already mounted on the torch)
Waterproofing: as per standard IP68, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1m in height
Notes: Integrated OLED display to display the selected mode type, residual voltage, degrees Celsius and further information - The flashlight has an integrated charging system via USB Type C cable

Key Features

Magnetic, portable and pocket-sized USB charger with charging and discharging functions
Compatible with Li-ion and IMR cylindrical batteries
Integrated USB 2.0 ports, both input and output
It intelligently identifies the positive and negative poles of the batteries
White LED light that can be used as an auxiliary torch, with 3 different levels of brightness
Charge and discharge indicator with 3 red LEDs to indicate the percentage reached
Automatically identify the battery voltage and select the appropriate type of charge (CC, CV)
Compatible with power banks, 5V solar panels and USB power supplies
Made of PC + ABS resistant to heat, flame and fire
 

Technical specifications

Input voltage: 5V or 500mA
Output Voltage: 4.2V ± 1% (BATTERY) / 5V ± 5% (USB) - 1A MAX
Dimensions: 245x24.5x18.5 mm.
Weight without batteries: 27.8g.
Compatible with IMR / Li-Ion batteries: 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700 (Compatible in general with any cylindrical Li-ion rechargeable battery and with 3.6 / 3.7V voltages)

Precautions:

Do not recharge different types of batteries in addition to those indicated
Do not leave the batteries unattended during charging operations
When the batteries are charged, remove the batteries from the charger before removing the electrical outlet to prevent the batteries from being discharged

ATTENTION: the batteries shown in the picture are not included.

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 8x CRI diodes> 90 with warm light (4500K) with a life cycle of 50,000 hours and with a diameter of 360 °
Operating Modes: 3 white light power, 2 red light power and 2 red light signaling modes selectable with the dedicated dedicated button
Powers and Durate white light: 250 Lumens (4h.) -> 55 Lumens (9.15h.) -> 8 Lumens (56h.)
Powers and Durate red light: 40 Lumens (7.15h.) -> 5 Lumens (48h.) -> S.O.S. -> Beacon Light
Peak of power: 80 candles
Maximum illumination distance: 35m diameter.
Ignition and selection method luminsa: Power on / off and selection button
Body: ABS
Batteries: Rechargeable 1800mAh Li-Ion, integrated, equipped with a MicroUSB charging system or 2x 1.2 / 1.5V disposable / rechargeable AA batteries sold separately
Measurements: 7.52cm (Alt.) - 4.95cm (Width) - 5.38cm (Thick)
Weight: 131g. - battery included
Accessories: USB / MicroUSB charging cable
Impermeability: as per IP66 standard, it resists strong jets of water from every direction
Impact resistance: withstands falls from 1m. of height
Notes: Equipped with an integrated charging system via a MicroUSB port; when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The base of the torch has integrated a hook to hang it - The base of the torch has integrated a magnet to anchor it to the magnetic surfaces.

Il caricabatterie Q2 è universale, intelligente ed ultra rapido. Carica due batterie a 1000mAh/ora e una batteria a 2000mAh/ora.

Riesce ad identificare automaticamente che tipo di batteria avete inserito: Li-ion o IMR ed applica autonomamente la corretta tensione di carica ed il corretto voltaggio. Ognuno dei 2 slot di ricarica è gestito autonomamente da un microprocessore capace di monitorare le batterie indipendentemente. Il LED colorato di carica aiuta a tenere tutto sotto controllo indicando la carica in corso (luce rossa) e la carica terminata (luce verde).

Semplicissimo da usare: basta inserire la batteria ed al resto pensa a tutto lui.

Caratteristiche:
* Carica 1 o 2 batterie simultaneamente, anche di tipi differenti tra loro
* Ogni slot di ricarica è indipendente
* Identificazione automatica del tipo di batteria inserita
* Identificazione automatica del voltaggio
* Identificazione automatica del tipo di carica (CC, CV e TC)
* LED rosso/verde per monitorare il progresso di carica
* Spegnimento automatico della carica al completamento
* Protezione contro l'inversione di polarità
* Dissipazione del calore ottimale
* Utilizzabile su rete fissa e compatibile con accendisigari da auto (cavo non fornito)
* Certificazioni CE e RoHS

Specifiche Tecniche:
* Voltaggio Input: DC 12V / 12W
* Potenza Input: 1A (max)
* Output Voltaggio: 4.2V
* Output Corrente:2A x1 / 1A x2
* Dimensioni: 125.4x59.6x36.2mm.
* Peso senza batterie: 92g.
* Compatibile con batterie IMR e Li-Ion: 18650, 18350, RCR123, 26650, 14500, 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14650, 16500, 16340, 16650, 17350, 17500, 17650, 17670, 17700, 18490, 18500, 18700, 22500, 22650, 25500, 26500, 26700, 20700, 21700 (solo a polo piatto), 22700

Precauzioni:
* Non ricaricare tipi differenti di batterie oltre a quelli indicati
* Non lasciare incustodite le batterie durante le operazioni di ricarica
* A batterie cariche, togliere le batterie dal caricabatterie prima di estrarre la presa elettrica per prevenire lo scaricamento delle batterie stesse

ATTENZIONE: le batterie visualizzate in foto non sono comprese.

4-seater 18650 battery holder made of extremely resistant rubber with optional safety velcro strap.

Allows you to store and keep ordered up to 4 18650 or equivalent cylindrical batteries with a diameter not exceeding 23mm. Thanks to the convenient Velcro strap you can store batteries safely in your pocket, inserting them in a backpack or travel bag or even hanging them on your belt, if necessary.

Dimensions: 4.16x4.29x8.78cm
Weight: 44.5g.

4-seater 18650 battery holder made of extremely resistant rubber with optional safety velcro strap.

Allows you to store and keep ordered up to 4 18650 or equivalent cylindrical batteries with a diameter not exceeding 23mm. Thanks to the convenient Velcro strap you can store batteries safely in your pocket, inserting them in a backpack or travel bag or even hanging them on your belt, if necessary.

Dimensions: 4.16x4.29x8.78cm
Weight: 44.5g.

The NITECORE NL1475R is a 750mAh 14500 micro-USB rechargeable battery that's compatible with multiple 14500 flashlights, headlamps and other electronic powered devices. No charger is needed to recharge this battery, it's equipped with a built-in micro-USB port that allows users to charge the battery directly using any compatible USB power source. Yet, the battery does have the ability to recharge using a traditional charger providing multiple recharge options for users. The NL1475R is equivalent to 500 pairs of non-rechargeable batteries and has a life span of over 500 recharge cycles, helping to reduce the cost of energy to users over time. 

The battery boasts multiple external safety mechanisms like a microporous barrier to defend internal components and a pressure relief valve to protect against rapid temperature increases and explosions. A built-in high-performance protection circuit protects the battery from overcharging, over discharging and short-circuiting to prevent damage and prolong battery life.

NITECORE NL1475R Specifications

• Battery Type: 14500
• Capacity: 750mAh
• Output: 2A
• Voltage: 3.6V
• Length: 1.95" (49.5mm)
• Diameter: 0.56" (14.2mm)
• Weight: 0.66oz (18.6g)

NITECORE NL1475R Features

• Integrated micro-USB charging port
• Compatible with traditional battery chargers
• Pressure relief valve protection for rapid temperature increases
• Microporous barrier to protect internal components
• High performance protected circuit automatically protects against overcharge, over discharge and short-circuiting
• Nickel-plated stainless steel protectors
• Certified by International Standards

Package Contents: NITECORE NL1475R 750mAh 14500 Micro-USB Rechargeable Battery

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Cree XP-G2 S3 + 1x LED auxiliary white color CRI> 90 + 1 LED auxiliary red color. All with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated dedicated button and 2 signaling modes. 1 Auxiliary white light, 2 red light power and intermittent signaling
Powers and Durate primary white light: 360 Lumens (0.5h.) -> 190 Lumens (5h.) -> 38 Lumens (8h.) -> 1 Lumen (160h.) -> S.O.S. -> Beacon Light
Powers and Durations auxiliary white light: 20 Lumens (6.15h.) - with maximum capacity of 5.5m
Powers and Durations auxiliary red light: 13 Lumens (7.45h.) - with maximum range of 4m -> 0.9 Lumens (68h.) -> Caution (13h.)
Peak of power: 1600 candles
Maximum illumination distance: 81m.
Ignition and selection method luminsa: Power on / off and white lights button + Power on / off button and red light selection
Body: ABS
Batteries: 610mAh Li-Ion, integrated, not removable, equipped with integrated MicroUSB charging system
Measurements: 5.55cm (Lenght) - 3.46cm (Width,) - 2.32cm (Thick)
Weight: 28g. - battery included
Accessories: front elastic band
Waterproof: IP66 standard: resistant to strong splashes of water
Impact resistance: withstands drops from 1.5m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable included in the package); when charging, an integrated LED will show the status and it will switch off automatically when the charging is complete. The recharging system automatically prevents undervoltage, overvoltage and has integrated protection against short circuits. - The auxiliary white light allows to illuminate at 100 ° amplitude. The inclination adjustment system allows to lower the torch up to 60 °

Questa torcia è dotata di un pratico sistema di ricarica integrato tramite plug MicroUSB che permette di ricaricare batterie di tipo 18650 (1x 18650 da 3400mAh inclusa nella confezione)

Potenze e durate certificate da standard ANSI/NEMA FL1 testate con 1x 18650 3.6V da 3400mAh

LED: 1x Cree XM-L2 U2 con ciclo vitale di 50,000 ore
Luce bianca principale: 5 output luminosi costanti, regolati digitalmente e selezionabili premendo l'apposito pulsante switch mode e 3 segnalazioni (police warning, S.O.S., location beacon)
Potenze e durate: 1 lumen (680 h.)  -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.)
Luce bianca ausiliaria: 26 lumens (25h.)
Luce rossa ausiliaria: 11 Lumens (20h) -> Caution 11 Lumens (32h)
Portata: fino a 110mt.
Picco di potenza: 3000 candele
Batterie utilizzabili: 1x 18650 3400mAh da 3.7V (inclusa nella confezione) o 2x CR123A da 3.0/3.7V usa e getta o ricaricabili
Dimensioni torcia: 82.7x33.3 mm. 
Peso: 62.7g (senza batteria)
Lente: in vetro indurito con trattamento anti riflesso
Corpo: in alluminio aeronautico
Finitura: anodizzata, Type III
Cinghia: elastica, regolabile in diametro ed in altezza
Note: resistente all'acqua come da standard IP68, immergibile a 2mt. di profondità per 30min. 
Accessori: 1x Batteria 18650 3.7V da 3400mAh - cavo di ricarica USB/MicroUSB - cinghia elastica frontale - o-ring di ricambio
Sistema Integrato di Ricarica: attraverso la porta MicroUSB integrata - protetta da una copertura isolata - e utilizzando il cavo Micro-USB fornito di serie è possibile provvedere alla ricarica della batteria in dotazione, l'operazione è monitorabile grazie ad un apposito led luminoso posto accanto sotto i pulsanti di selezione luminosa. Il cavo di ricarica può essere attaccato a qualsiasi PC dotato di porta USB o a qualsiasi alimentatore da parete o da accendisigari dotato di porta USB.

Clicca il link per visionare una recensione approfondita del modello Nitecore HC65

Power and durability certified by ANSI / NEMA FL1 standards tested with 4x AA 1.2V 2450mAh

LED: 1x Cree XM-L2 U2 with 50,000 hour life cycle
Output 5 constant light outputs, digitally adjusted and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (430h.) -> 45 lumens (38h.) -> 210 lumens (6.30h.) -> 500 lumens (2.15h.) -> 1000 (1h.)
Range: up to 182m.
Peak power: 8300 candles
Usable batteries: 4x AA type 1.2 / 1.5V batteries (not included - can be purchased separately)
Torch size: 64x36x56 mm.
Weight: 126g (without batteries and battery pack)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Belt: elastic, adjustable in diameter and in height
Notes: water resistant as per IPX-8 standard, submersible at 2mt. of depth for 30min.
Accessories: Separate battery pack made of ABS and silicone, waterproof - front elastic strap - spare o-ring