Neck Knives: your reliable daily companion

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

Born from field experience, designed to handle everyday life. The 177 Mini SOCP offers peace of mind and safety in a slim, easily concealable design.

The J-hook-style sheath clip ensures a reliable hold on MOLLE systems, pocket edges, and belts. The overall length allows for greater discretion without compromising effectiveness in the most challenging situations.

Designed with a specific purpose and built to last, the Mini SOCP represents a high standard of durability and performance, backed by our promise: it will be yours, forever.

Manufacturing Type: Industrial

Country of Manufacture: USA
Blade: 440C stainless steel full tang
Blade Finish: Powder coating
Handle: 440C stainless steel
Blade Length: 56mm.
Blade Thickness: 4.45mm.
Overall Length: 158mm.
Weight: 85g.
Sheath: Polymer, with clip attachment
Packaging: Cardboard box with Benchmade logos
Notes: Designed by Greg Thompson - comes with paracord and removable leather finger ring holder 

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Purchased from a private individual, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpening: Factory-sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

Intended use: neck knife / light utility / EDC

Type of production: Industrial
Country of production: USA
Blade: 1095 steel with black texture powder coating finish
Handle: Micarta
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Balance: rearward, at 2cm
Weight: 82g.
Sheath: thermoformed Kydex, neck sheath
Notes: previously purchased knife, like new, from a private collection

In the forests of Orsa, pink sandstone has been quarried for over a thousand years, refining tools and shaping craftsmanship through the generations. Here, a tradition of skill and perseverance was born, where stone met steel and forged knowledge that lasts a lifetime.

The Color of the Year 2026, Orsa Sandstone and Dala Red, adorns the compact Eldris outdoor knife. The colors are inspired by the light, natural shade of sandstone meeting classic Dala red, a tribute to Morakniv's heritage and origins.

Intended use: Neck Knife / Backup

Production type: industrial
Country of production: Sweden
Blade: Sandvik 12C27 stainless steel 57/58HRC
Handle: ABS and non-slip rubber
Blade length: 53mm.
Blade thickness: 2mm.
Total length: 143mm.
Balance: rearward
Weight: 80g.
Sheath: ABS
Notes: Limited edition for 2026 in Dala Red and Orsa Sandstone colors

Dynamic, mystical, “toxic”: the Böker Plus Midgards Snake captures the senses and leaves no one indifferent. Never before has a fixed blade knife been designed with such skill to tackle any everyday cutting task.

Made entirely of steel, with a stonewashed D2 clip-point blade, it is a lightweight EDC that is always ready for use thanks to the included Kydex sheath. Cardboard, packaging, or ropes yield in an instant to the effective “toxicity” of its blade.

The filigree, sinuous, and enveloping handle offers a secure grip and comfort even in the most demanding jobs, allowing you to hold the knife between your fingers while both hands remain free for other activities. The ergonomics are further enhanced by the non-slip jimping on the thumb rest and the bottom of the handle, whose pointed shape resembles the rattles of a rattlesnake and acts as an emergency glass breaker.

The design is completed by a lanyard hole and a stainless steel clip for the Kydex sheath.

Intended use: Sports knife

Type of production: Industrial
Country of production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: -
Blade length: 115mm.
Blade thickness: 5.2 mm.
Total length: 236 mm.
Weight: 146 g.
Sheath: Kydex, with removable, multi-position belt loop
Packaging: cardboard box with Boker Plus logos
Notes: Design by Midgards Messer

Minimalist design, maximum dedication: the BFF Packlite Stargaze, designed by American knife maker Lucas Burnley, represents the purest essence of his style, designed for those with a spirit of boundless discovery. This new evolution of the successful BFF series introduces an ultra-lightweight skeletonized knife with removable Richlite scales, a highly sustainable composite material made from FSC-certified or recycled paper and resin.

The all-steel construction, with a CPM MagnaCut (61-62 HRC) drop-point blade with black Cerakote finish, ensures maximum stability and exceptional cutting performance. Hard, durable, stainless, and tough: no other steel offers more. Details such as the elegant ricasso, the pronounced jimping on the blade spine, and the heat-treated golden-hued handle screws complete the knife's agile and decisive character, combining functionality and aesthetic impact.

Burnley's post-tactical concept is expressed in the milling of the handle, which reduces weight without compromising reliability, emphasizing the tactical vocation of the model as a true neck knife, versatile and ready for different attachment options. EDC, tactical, or backup knife, the BFF Packlite knows no limits and is always ready for new challenges.

Supplied with a custom-made Kydex sheath and ball chain. Handmade in the Böker Manufactory in Solingen.

Intended use: EDC / Tactical / Backup / Neck Knife

Type of production: Industrial
Country of production: Germany
Blade: full tang in CPM-MagnaCut steel at 61/62HRC
Blade finish: Cerakote
Handle: Richlite
Blade length: 65mm
Blade thickness: 2.5mm
Overall length: 155mm
Weight: 55g
Sheath: Kydex, neck sheath
Packaging: Cardboard box with manufacturer's logos, felt pouch with zip
Notes: Designed by Lucas Burnley, ultra-lightweight skeletonized construction, ideal as a neck knife

Polish knife maker David Hás accompanied the Boker Plus Pollywog throughout its metamorphosis, from blank sheet to debut in the EDC world.

Inspired by the charm of nature, the Cronos Knives designer carefully shaped the form and composition of this fixed blade knife, taking inspiration from the tadpole from which it takes its name. The satin-finished drop-point blade recalls the tail of the small amphibian and guides the Neck Knife confidently through everyday life, thanks to the exceptional properties of Nitro-V steel. This material is distinguished by its high edge retention and low susceptibility to corrosion, making even small outdoor cutting jobs easy.

Jimping on the thumb rest and full tang construction ensure maximum precision and control, while the contoured G10 scales with ergonomic finger grooves offer additional comfort. The end of the handle features a hollow rivet reminiscent of the tadpole's eyes and serves as a lanyard hole.

The knife comes complete with a custom-made Kydex sheath with ball chain and a lanyard for safe and stylish carrying.

Intended use: Neck Knife / EDC / Light Utility

Type of production: Industrial
Country of production: China
Blade: Nitro-V stainless steel full tang
Blade finish: Satin
Handle: G10
Blade length: 66mm.
Blade thickness: 2.8mm.
Total length: 138mm.
Weight: 58g.
Sheath: Kydex, with neck chain
Packaging: cardboard box with Boker Plus logos
Notes: Design by David Hás

The Minimalist Nessmuk is an outdoor knife designed to combine lightness with exceptional utility. Although the American conservationist who inspired the Nessmuk knife's name primarily valued functionality, expert blacksmith Alan Folts knows how to masterfully combine functionality and design.

With a sturdy D2 steel blade and a sleek, easy-to-grip micarta handle, the Nessmuk Minimalist stands out for its versatility: the practical sheath allows it to be worn around the neck, attached to a backpack, or attached to a belt.

With its pronounced curvature, sturdy tip and crescent-shaped blade design, the Nessmuk is a proven outdoor knife popular in the hunting, fishing and bushcraft communities for its versatile and efficient cutting ability. The sleek design, comfortable grip, and ability to handle all types of cutting make this lightweight knife the ideal companion for any outdoor adventure.

Intended Use: Light Utility / Neck Knife

Production Type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Stonewashed
Handle: Micarta
Blade length: 74mm.
Blade thickness: 3.7mm.
Total length: 152mm.
Weight: 74g.
Sheath: Nylon, for neck or with removable and repositionable belt loop
Packaging: cardboard box with CRKT logos
Notes: Design dy Alan Folts

The Minimalist Nessmuk is an outdoor knife designed to combine lightness with exceptional utility. Although the American conservationist who inspired the Nessmuk knife's name primarily valued functionality, expert blacksmith Alan Folts knows how to masterfully combine functionality and design.

With a sturdy D2 steel blade and a sleek, easy-to-grip micarta handle, the Nessmuk Minimalist stands out for its versatility: the practical sheath allows it to be worn around the neck, attached to a backpack, or attached to a belt.

With its pronounced curvature, sturdy tip and crescent-shaped blade design, the Nessmuk is a proven outdoor knife popular in the hunting, fishing and bushcraft communities for its versatile and efficient cutting ability. The sleek design, comfortable grip, and ability to handle all types of cutting make this lightweight knife the ideal companion for any outdoor adventure.

Intended Use: Light Utility / Neck Knife

Production Type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Stonewashed
Handle: Micarta
Blade length: 74mm.
Blade thickness: 3.7mm.
Total length: 152mm.
Weight: 74g.
Sheath: Nylon, for neck or with removable and repositionable belt loop
Packaging: cardboard box with CRKT logos
Notes: Design dy Alan Folts

Böker BFF Packlite Black Richlite is an ultra-lightweight fixed blade knife designed by renowned knifemaker Lucas Burnley. Featuring a minimalist and functional design, this model is part of the Barlow BFF series, expanded with a skeletonized version to maximize weight reduction without compromising strength.

The blade, made of MagnaCut steel with a stonewashed finish, ensures exceptional wear resistance, a hardness of 61-62 HRC, and outstanding cutting performance. The handle features removable scales made of Richlite, an eco-friendly material composed of resin and FSC-certified recycled paper, providing an excellent grip and a natural aesthetic. The skeletonized frame further reduces weight while giving the knife a modern and aggressive look.

Perfect as an EDC, tactical, or backup knife, the Böker BFF Packlite is versatile and ready for any challenge. It comes with a sturdy Kydex sheath and a ball chain for neck carry. Handcrafted in Solingen, Germany, it is the ideal choice for those seeking a compact, high-performance, and refined knife.

Technical Specifications
Intended Use: EDC, Tactical, Backup
Production Type: Industrial
Country of Manufacture: Germany
Blade: MagnaCut Steel (61-62 HRC)
Blade Finish: Stonewashed
Handle: Richlite (removable)
Blade Length: 65 mm
Blade Thickness: 2.5 mm
Closed Length: -
Total Length: 154 mm
Closed Thickness: -
Weight: 37 g
Locking Mechanism: Full tang (fixed blade)
Clip: -
Packaging: Böker box + Kydex sheath + ball chain
Notes: Designed by Lucas Burnley, ultra-lightweight skeletonized structure, ideal as a neck knife

Versa combines innovative design with unparalleled functionality. The name “Versa” perfectly embodies the characteristics of this knife: its versatility makes it suitable for a variety of situations, showing its adaptability both in urban environments as an EDC (Every Day Carry) knife and in more adventurous settings such as outdoor, survival, bushcraft, hunting and even tactical scenarios. It is also ideal as a backup knife. This knife is ready to meet every need by combining style and practicality in one tool. Versa comes in two distinct models: Versa Satin, perfect for everyday use and Versa Expeditions, more suitable in outdoor, survival and bushcraft settings.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel N690Co at 58HRC
Blade finish: satin finish
Handle: monolithic, pierced, stainless steel N690Co at 58HRC
Blade length: 80mm.
Blade thickness: 6.3mm.
Total length: 180mm.
Weight: 110g.
Sheath: made of Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: /

Versa combines innovative design with unparalleled functionality. The name “Versa” perfectly embodies the characteristics of this knife: its versatility makes it suitable for a variety of situations, showing its adaptability both in urban environments as an EDC (Every Day Carry) knife and in more adventurous settings such as outdoor, survival, bushcraft, hunting and even tactical scenarios. It is also ideal as a backup knife. This knife is ready to meet every need by combining style and practicality in one tool. Versa comes in two distinct models: Versa Satin, perfect for everyday use and Versa Expeditions, more suitable in outdoor, survival and bushcraft settings.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel N690Co at 58HRC
Blade finish: burnishing MIL-C-13924 with Dark Stone finish
Handle: monolithic, pierced, stainless steel N690Co at 58HRC
Blade length: 80mm.
Blade thickness: 6.3mm.
Total length: 180mm.
Weight: 110g.
Sheath: made of Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: Firesteel and kydex sheath included in package

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

Built on a solid foundation, the revamped 15201OR Altitude takes ultralight hunting gear to new levels. Incorporating feedback from our fans, this minimalist fixed blade features full-length carbon fiber sheaths for better blade control in CPM-S90V. This less than 50-gram machining tool earns its place at your side with a balance of corrosion resistance, strength, and edge retention.


Intended Use: Hunting

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S90V (59/61HRC)
Blade treatment: Cerakote
Handle: stainless steel CPM-S90V with carbon fiber grips
Blade length: 78mm.
Blade thickness: 2.3mm.
Total length: 175mm.
Weight: 47g.
Sheath: made of Boltaron, for neck or compatible with M.O.L.L.E. type attachments.
Packaging: cardboard box with Benchmade logos
Notes: -

The Boker Plus Accomplice by John Gray is a very compact and handy EDC or reserve knife, which with its slim handle and the typical karambit ring at the end of the handle combines a high level of user comfort with the discretion of an excellent hand position. It can also be carried as a large neck knife. The G10 handles feature a textured groove and are fully contoured, so that the Accomplice virtually nestles in the hand. The blade is made of D2 and features a satin finish. Comes with customised Kydex sheath and large belt adapter.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: China
Blade: Full tang, D2 steel
Blade finish: Satin finish
Handle: G10
Blade length: 82mm.
Blade thickness: 4.1mm.
Total length: 111mm.
Weight: 111g.
Sheath: in kydex, with Tek-Lok type multi-position attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by John Gray

Satre Expeditions, as well as the Satre model from which it derives, is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses or as part of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor. In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards.

The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder. 

The full-tang skeletonized structure, allows you to customize the knife using Paracord as a coating for the handle.

Satre Expeditions uses Böhler N690 steel heat treated to 58 HRC with MIL-C-13924 burnishing and stone washed surface treatment (Dark Stone finish). It comes with a desert-colored pre-formed kydex sheath on which you can attach the Firesteel for lighting fires (provided inside the box).

Intended use: Neck knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58
Blade finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Stainless steel N690Co 58
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes:Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).

Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.

It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).

In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.

The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle

This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.

Intended use: Neck / Hiking / Utility Knife

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)

The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.

Intended use: Tactical / CQB

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava design

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.

The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.

The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.

Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.

Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.

The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.

Intended Use: Neck Knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Intended Use: Neck Knife

Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan Folts

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Ultra-Tiny keyring knife, made of TC4 titanium alloy and made with precise CNC machining.
The NTK05 model uses a No. 11 scalpel blade, easily replaceable and accessible in the market.

The comfortable 35-degree grip ensures stability and cutting precision.
The elegant and tapered design allows it to be attached to a key ring, to a backpack, to use it as a mini EDC or as a pendant.

Type of production: industrial
Country of production: China
Blade: replaceable, in stainless steel, N.11 Scalpel Blade
Handle: unibody in titanium with the following sizes 55mm x 12mm x 3mm
Blade length: 20mm.
Blade thickness: 0.3mm.
Total length open: 96mm with blade completely extracted
Weight: 5g.
Clip: -
Packaging: Cardboard box with Nitecore logos
Note: -

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Desert Warfare
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK3 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.

The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK2 is a small knife that extends the family of the Extrema Ratio neck knives.

It differs from the model NK1 for blade tip tanto styled and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or forefinger depending on use. The structure enables both use for very effective cutting work or for small precision work.The quick release Kydex sheath is supplied with paracord for carrying on the neck.

Intended use: Neck Knife
Type of production: Industrial
Production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black PVD cat. MIL-C-13924
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 50mm.
Blade thickness: 6.3mm.
Total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with Extrema Ratio logo
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

NK2 is a small knife that extends the family of the neck knives Extrema Ratio.

It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.

On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.

intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)

Intended Use: Neck Knife

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Desert Warfare
Handle material: stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 129mm.
Thick when closed: -
Balancing: -
Weight: 55g.
Closure: -
Clip: -
Sheath: Kydex, Neck
Packaging: Cardboard box with logos Extrema Ratio
Note: use of the sheath with MOLLE systems or Tek-Lok (not included in the package)

Intended Use: Neck Knife

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Stone Washed
Handle material: stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 129mm.
Thick when closed: -
Balancing: -
Weight: 55g.
Closure: -
Clip: -
Sheath: Kydex, Neck
Packaging: Cardboard box with logos Extrema Ratio
Note: use of the sheath with MOLLE systems or Tek-Lok (not included in the package)

Intended Use: Neck Knife

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Testudo
Handle material: stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 129mm.
Thick when closed: -
Balancing: -
Weight: 55g.
Closure: -
Clip: -
Sheath: Kydex, Neck
Packaging: Cardboard box with logos Extrema Ratio
Note: use of the sheath with MOLLE systems or Tek-Lok (not included in the package)

Destinazione d'uso: sportivo/neck knife

Tipo di produzione: industriale
Lama: in acciaio inox 420 SubZero Quanch
Produzione Lama: Japan
Manicatura: Kraton
Lunghezza lama: 50mm.
Spessore della lama: 2mm.
Lunghezza totale: 110mm.
Peso: 20g.
Fodero: Secure-Ex in ABS
Note: -