Bowie knives originated in the United States in the early 19th century and were considered reliable work knives, even occasionally used in combat. Typical of these fixed knives is the massive blade, with a characteristic design, usually more than 15 cm long and with a guard to protect the hand.

As a variant suitable for everyday use, the Chuck Gedraitis Boker Plus Pocket Bowie combines the fascination of the Bowie knife with the flexibility and compactness of a pocket knife. Equipped with a satin-finished Bowie blade made of D2, the three-finger knife easily copes with all day-to-day tasks.

The knife opens via the pull-out thumb stud, while the stainless steel linerlock reliably locks the blade in place.

The ergonomic handle with brown Burlap micarta scales promises a secure grip and gives the knife a touch of the Wild West.

The clip is beautifully integrated into the rear handle and allows tip-up carrying.

Supplied with a high quality nylon case.

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: D2 58HRC steel
Blade finish: Satin
Handle: micarta
Blade length: 70mm.
Blade thickness: 3mm.
Total length: 158mm.
Weight: 78g.
Sheath: clip
Packaging: cardboard box with Boker logos and nylon case
Note: -

Whether in the home hearth, hunting lodge, garden, forestry maintenance, scout camp or bushcraft camp, the axe, one of mankind's oldest tools, is still an indispensable item for many activities. Some outdoor enthusiasts even prefer the axe to the knife.

Boker Plus Appalachian axes feature a Rhine-shaped axe head made of 1055 carbon steel, a choice that represents an above-average carbon content and material standard even for quality axes. The universal blade thickness is suitable for both felling and splitting. The lower tip (heel) of the 10.7-cm-long cutting edge can be used as a turning point for wood pieces. The steel is protected from rust by a protective lacquer. A versatile weight of 600g was chosen for the heads of both axes. The best American long-fiber walnut, far superior to European ash for breaking elasticity and impact resistance, was used for the handles. The handles are attached to the head with wooden wedge and steel sleeve. The two models Appalachian Big and Appalchian Small differ in the length of the handles.

Intended Use: Hiking/Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: 1055 carbon steel
Blade treatment: /
Handle: Hickory wood (American Walnut)
Blade length: 10.50cm.
Blade thickness: 2cm.
Total length: 35.5cm.
Weight: 800g. + 91g (scabbard)
Sheath: leather blade cover 09BO257 specially made for the Appalachian series
Packaging: exposed
Notes: -

Whether in the home hearth, hunting lodge, garden, forestry maintenance, scout camp or bushcraft camp, the axe, one of mankind's oldest tools, is still an indispensable item for many activities. Some outdoor enthusiasts even prefer the axe to the knife.

Boker Plus Appalachian axes feature a Rhine-shaped axe head made of 1055 carbon steel, a choice that represents an above-average carbon content and material standard even for quality axes. The universal blade thickness is suitable for both felling and splitting. The lower tip (heel) of the 10.7-cm-long cutting edge can be used as a turning point for wood pieces. The steel is protected from rust by a protective lacquer. A versatile weight of 600g was chosen for the heads of both axes. The best American long-fiber walnut, far superior to European ash for breaking elasticity and impact resistance, was used for the handles. The handles are attached to the head with wooden wedge and steel sleeve. The two models Appalachian Big and Appalchian Small differ in the length of the handles.

Intended Use: Hiking/Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: 1055 carbon steel
Blade treatment: /
Handle: Hickory wood (American Walnut)
Blade length: 10.50cm.
Blade thickness: 2cm.
Total length: 60cm.
Weight: 873g. + 91g (scabbard)
Sheath: leather blade cover 09BO257 specially made for the Appalachian series
Packaging: exposed
Notes: -

Timeless engineering and lived history! Inspired by a true air classic, Boker Plus presents the P-51 Damast by Steve Kelly as a designer knife with exceptional character. Based on the North American P-51 Mustang, the knife mirrors the material, shape and color of the 1940s fighter plane, creating almost a replica of its historic model.

Some 15,800 examples of this low-wing aircraft were produced in various versions between 1940 and 1948, making it still one of the most built military aircraft in the world today. The P-51 D is the most widespread series, with just under 8,000 examples. The special features of the P-51 Mustang, whose "P" in the name stands for Pursuit, lay in its full-metal aerodynamic construction with characteristic flared pins, which in combination with the massive Packard Merlin V-1650 engine allowed a top speed of 700 km/h with an extraordinary range of up to 3,300 km. These achievements were considered revolutionary at the time and led to the air supremacy of the United States Army Air Forces during World War II.

It was not only the unmistakable lines of the P-51 Mustang that prompted Boker's development department to undertake this exciting project. The challenge was to transfer the design language and performance of the combat aircraft into a knife without compromising elegance and practicality.

The heart of the Boker Plus P-51 Damast is its distinctive 80-ply Damascus spearhead blade, forged by Chad Nichols in the United States and composed of original parts from the historic fighter plane. Viewed from the side, the blade has a number of visual reminiscences of the historic fighter-bomber. The thumb hole, for example, is reminiscent of the Plexiglas cockpit canopy, which allowed the pilot an ideal all-around view.

Another prominent feature is the titanium handle, which mimics the aircraft's studded light metal plates to the smallest detail. The blue blade axis screw, which bears the U.S. Army Silver Star, and the red anodized screws, which echo the color scheme of the tail rudder, stand out.

Intended Use: Sporting/collection

Type of production: Industrial
Country of manufacture: Taiwan
Blade: Handcrafted 80-ply Damascus by Chad Nichols from original P51 Mustang parts
Blade Finish: -
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 193mm.
Weight: 10g.
Clip: titanium, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Carson Flipper-type opening system on ball bearings

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 76mm.
Blade thickness: 3.7mm.
Total length: 155mm.
Weight: 103g.
Sheath: kydex, with Tek-Lok type multi-position attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes

Intended Use: Neck / EDC / Sporting

Production type: Industrial
Country of Production: China
Blade: full tang, D2 steel
Blade finish: TPFE
Handle: Micarta and Copper
Blade length: 55mm.
Blade thickness: 3.5mm.
Total length: 98mm.
Weight: 48g.
Sheath: kydex, neck, with chain
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes

Intended Use: Outdoor / Bushcraft / Light Utility

Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -

As a Filipino martial arts enthusiast, Italian knife designer Alessandra De Santis of Hydra Design decided to design a Karambit knife for Boker Plus. These sickle-shaped knives originated in Southeast Asia and were preferably used for harvesting rice. In contrast, the Karambit from Boker Plus comes in a tactical guise. The 154CM Hawkbill blade effortlessly slices its way through cardboard and ropes, while the G10 handle and sturdy linerlock provide the necessary safety on the job.

Light weight and high efficiency form the backbone of the pocket knife named after the Norse goddess of the underworld. As an alternative to the flipper opening, the knife offers a thumb stud screwed into the back of the blade whose shape also serves as an "Emerson Wave"-style opening. Alessandra De Santis' characteristic angular design elements are found in the G10 ring at the end of the handle. The flush, reversible clip allows for flexible knife carrying. Supplied with a high-quality nylon pouch.


Intended Use: Tactical

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: satin finish
Handle: G10
Blade length: 61mm.
Blade thickness: 2.8mm.
Total length: 170mm.
Weight: 93g.
Clip: removable and reversible, stainless steel
Closure: LinerLock 
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings and via "Emerson Wave" style pin - design by Alessandra De Santis

As a Filipino martial arts enthusiast, Italian knife designer Alessandra De Santis of Hydra Design decided to design a Karambit knife for Boker Plus. These sickle-shaped knives originated in Southeast Asia and were preferably used for harvesting rice. In contrast, the Karambit from Boker Plus comes in a tactical guise. The black-coated 154CM Hawkbill blade effortlessly slices its way through cardboard and ropes, while the black G10 handle and sturdy linerlock provide much-needed safety on the job.

Light weight and high efficiency form the backbone of the pocket knife named after the Norse goddess of the underworld. As an alternative to the flipper opening, the knife offers a thumb stud screwed into the back of the blade whose shape also serves as an "Emerson Wave"-style opening. Alessandra De Santis' characteristic angular design elements are found in the G10 ring at the end of the handle. The flush, reversible clip allows for flexible knife carrying. Supplied with a high-quality nylon pouch.


Intended Use: Tactical

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: black coating
Handle: G10
Blade length: 61mm.
Blade thickness: 2.8mm.
Total length: 170mm.
Weight: 93g.
Clip: removable and reversible, stainless steel
Closure: LinerLock 
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings and via "Emerson Wave" style pin - design by Alessandra De Santis

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 47g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei Matsuno

Medium grit ceramic sharpener n suitable for sharpening any type of knife with steel blade, mainly recommended for professional kitchen and chef knives.

The abrasive is ceramic and is applied to a break-resistant oval steel tube. The effective usable length is 25 cm. and it comes with a durable black plastic handle and a rubber front foot for easy standing and use on a flat surface.

Quality level: good

Intended Use: EDC/Gentleman

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Carbon steel O1
Blade treatment: Meteoric Black Stonewashed
Handle: Stained maple burl
Blade length: 80mm.
Blade thickness: 2.1mm.
Total length: 190mm.
Weight: 69g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Boker logos, zippered knife case
Notes: -

FUNCTIONS:
* Flat edge blade with LinerLock lock.
* Screwdriver holder bits with Philips screwdriver.
* Awl / Reamer / Parcel Opener.
* Sewing needle
* Scissors
* Glass breaker
* Nylon Scabbard

MATERIALS:
* 3Cr13MoV Stainless Steel blade.
* 2Cr13 Stainless Steel tools

Country of Production: China
Blade length: 79mm
Open length: 187mm
Length closed: 110mm
Thickness: 18mm
Weight: 127g

With the Boker Plus Epicenter Backlock, U.S. designer Todd Rexford has created a knife of impressive proportions that combines the irrepressible forces of nature and unleashes an uncontrollable tremor in the center of knife enthusiasts' emotions.

With the yellow and black color combination of the all-G10 shaped handle, the Epicenter ranks right at the top of the Richter scale. Only the sturdy backlock can tame the elemental force this pocket knife can generate, securely locking the blade in place.

The brass lanyard hole and the ring on the blade axis screw add to the appeal of this natural phenomenon and inevitably make your hands shake.



Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3.7mm.
Length when closed: 120mm.
Total length: 210mm.
Weight: 130g.
Clip: stainless steel, removable
Closure: Back Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Todd Rexford

Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.

The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.

Intended Use: Tactical / CQB 

Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander Krava

The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.

The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.

A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray box

Compact and easy to use sharpening device, mainly used for knives and larger garden tools such as axes, machetes, spades and hoes. The sanding discs have two sides of different grain sizes. Silica gel shells, which lock the discs, are used for storage and transportation.

Model 09BO378 features two sides; one with a 200 grit abrasive surface, the other with a 600 grit abrasive surface.

Dimensions:
length 60 x 60 mm - Weight: 200g.

Quality level: good

Compact and easy to use sharpening device that is mainly used for knives and larger garden tools such as axes, machetes, spades and hoes. The sanding discs have two sides of different grain sizes. Silica gel shells, which lock the discs, are used for storage and transportation.

Model 09BO379 has sides; one with an industrial diamond coated 360 grit abrasive surface over a plastic core and the other with a ceramic abrasive surface. Both sides are suitable for wet and dry sharpening.

Dimensions:
length 60 x60 mm - Weight: 236g.

Quality level: good

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel VG10
Blade treatment: satin finish
Handle: G10
Blade length: 84mm.
Blade thickness: 2.5mm.
Total length: 191mm.
Weight: 43g.
Clip: stainless steel, machined from solid, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Blackwash
Handle: Micarta and Blackwash Steel
Blade length: 71mm.
Blade thickness: 2.8mm.
Total length: 165mm.
Weight: 67g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: design by Mike Skellern

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 91mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 132g.
Clip: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel M390
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 2.3mm.
Total length: 167mm.
Weight: 75.5g.
Clip: Stainless steel billet, removable
Closure: Liner Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

The outstanding Boker Plus Fragment convinces as a light EDC or backup knife with an extremely reduced design.

The practical pocket knife completely dispenses with a front handle and instead relies on a minimalist rod that connects the blade axis screw.

The blade is made from 9Cr13CoMoV steel and, like the entire all-steel tang construction, is finished in a dark stonewash finish.

The operational safety of the modern slipjoint pocket knife is further enhanced by a 90 degree stop device when opening and closing the blade. Equipped with hole for lanyard and practical clip for transport.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: 9Cr13MoV stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 50mm.
Blade thickness: 2.5mm.
Total length: 130mm.
Weight: 31g.
Clips: -
Closure: Slip Join
Packaging: cardboard box with Boker Plus logos
Note: -

The distinctive design, the Tracker concept with two separate blades, the impact-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made Dave Wenger's Boker Plus Mini Tracker a top seller in the bushcraft and outdoor scene. While the front of the larger Tracker variants is primarily suitable for chopping and splitting, the blade shape of the smaller size of the new Boker Plus Micro Tracker shows completely different advantages and qualities.

The Micro Tracker shares the benefits of two sharpening angles on one blade with its bigger brothers. Additionally, the front half of the blade in the smaller format is great for working on a chopping board and the sturdy tip is great for opening boxes in everyday use. The small nose, which separates the two grinds, pulls hard when cutting in soft materials and is predestined for cutting ropes, lines and belts.

The field and 3D archer appreciates the compact size, powerful point and archaic look when working out the wrong arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish as the Mini Tracker.

The three hollow brass studs carefully recessed and chamfered into the handle add visual flair. Supplied with a belt adapter and sheath

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: powder coat
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 159g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave Wenger

Sincerity, courage, and kindness are among the traditional basic virtues that still enjoy a high status in Japanese society today. Knifemaker Kansei Matsuno incorporates these values ​​into the Boker Plus LFL07 and creates a noble gentleman's knife full of grace and style.

Featuring a CPM-S-35VN metallurgical powder hollow blade with a fine finish, the pocket knife tackles any cutting task sublimely.

The eye-catcher and visual highlight of the Boker Plus LFL07 is the grey-brown handle made of FAT carbon, which is interspersed with gold-colored nuances and consistently continues the fine line of the folding knife.

The reliably and harmoniously functioning stainless steel linerlock completes the overall look of the collector's knife, which is limited to 500 pieces in Europe.

The deep carry clip made of brushed stainless steel allows flip-up carry (r) and is functionally supported by the lanyard hole.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: CPM S35VN stainless steel
Blade treatment: satin finish
Handle: Carbon Fiber
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 53g.
Clips: steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno - Limited edition of 500 pieces

Brad Zinker riesce sempre a scoprire nuove sfaccettature del popolare Boker Plus Urban Trapper. In qualità di maestro coltellinaio, il designer di coltelli statunitense sa meglio di chiunque altro come reinventare i design esistenti di coltello gentleman con combinazioni intelligenti di materiali.

Il Boker Plus Urban Trapper Jigged Titanium è dotato di una lama VG-10 con superficie rettificata e cuscinetti a sfera con una finitura sottile, che si apre con un flipper ed è fissata da un robusto linerlock.

Un accento moderno è dato dall'impugnatura in titanio, che rende omaggio agli innumerevoli classici con guancette in osso jigged. Questo non solo posiziona visivamente il coltello in primo piano, ma migliora anche in modo significativo la sensazione del coltellino tascabile.

La clip per il trasporto profondo in acciaio inossidabile consente il trasporto ribaltabile (r) ed è rifinita con una finitura stonewash.

Destinazione d'uso: Gentleman / Sportivo

Tipo di produzione: Industriale
Paese di produzione: Taiwan
Lama: in acciaio inox VG10
Trattamento lama: satinatura
Manicatura: frame in titanio con guancette in titanio
Lunghezza lama: 88mm.
Spessore lama: 2.5mm.
Lunghezza totale: 195mm.
Peso: 78g.
Clip: in titanio
Chiusura: Liner lock
Confezione: scatola di cartone con loghi Boker Plus
Note: Design by Brad Zinker

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel CPM-S-35VN
Blade treatment: satin finish
Handle: steel liners and titanium grips
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 116g.
Clip: removable stainless steel
Closure: button lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - manual opening system via carson flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment:-
Handle:stainless damascus steel
Blade length: 64mm.
Blade thickness: 2mm.
Total length: 141mm.
Weight:40g.
Clip:stainless damascus steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium 
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Escape from everyday life and find your inner soul: Suiseki is a meditative art form from Asia that presents expressive stones in a particularly effective way. The calming character emanates from the natural shape of the stones, ranging from abstract to impressive representations of landscapes, animals or plants.

Knife designer Darriel Caston expands the spiritual level with a steel and plastic creation and introduces the Boker Plus Suiseki, a compact everyday knife full of sweetness and energy.

With stoic calm, the ball-bearing D2 blade with a chisel grind cuts through the tasks of everyday life and relies on the sure grip of the stainless steel frame lock. Asceticism and function determine the shape of this pocket knife, which maintains a modern impulse with G10 scales.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: G10
Blade length: 39mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 64g.
Clips: -
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Darriel Caston

KNIFE TAKEN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: very good, mirror polished blade with a few slight surface marks (visible against the light) from being inserted in the sheath - a few dots of oxidation on brass guard and pommel
* Commercially available Out of production
* Sharpening: Original edge
* Marks on blade: yes, light and superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good condition
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended Use: Utility/Hunting

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 440C
Blade finish: Mirror polished
Handle: Briar
Blade length: 123mm. (edge 112mm.)
Blade thickness: 4.4mm.
Total length: 230mm.
Weight: 162g.
Sheath: leather
Packaging: -
Notes: -

The Boker Plus Mini Tracker, designed by Dave Wenger, has quickly become a favorite in the bushcraft camping and dust scene, as a sturdy outdoor activity knife thanks to the massive 1095 carbon steel blade and corrosion resistant coating. The large Boker Plus Tracker is following in the footsteps of the small ... same materials, same features, but with unmatched performance! The massive survival knife blade features two different bevel surfaces, ideal for cutting, scraping, digging and prying. The optimal balance between the thickness, the length of the blade and the ergonomic shape of the finely worked micarta handle, allow you to work effortlessly even in extreme environments. The handle has three decorative brass hollow rivets, the back of which can be used as a lanyard hole. Supplied with a belt adapter and a custom made Kydex sheath.

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: a powder cover
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 469 g.
Sheath: in the Kydex
Packaging: cardboard box with Boker Plus logos
Note: design by Dave Wenger

When Boker designed this Boker BRONCO fixed outdoor knife, it set ambitious goals;

- Universal and optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, hikers, hunters, SAR teams and others. - A CPM steel blade, a handle that fits comfortably in your hand even when working for long periods of time. A quality leather sheath that can be worn with or without a pendant. 100% production in Solingen / Germany

- The CPM-3V was developed by Crucible Industries LLC - a world leader in the 62-63 HRC sintered metallurgical steel market.

The universal wide point blade with high saber sharpening has always been the hunter's favorite shape for both large and small game and is suitable for both precision and heavier tasks. The tang is continuous and protrudes a few millimeters from the end of the handle. This ensures maximum stability and the tang can withstand even powerful blows with a log or other object.

TPE - thermoplastic elastomer - was chosen as the material of the handle, which completely encloses the tang and has a structure that guarantees a good grip in any load direction. TPE is strong, elastic, non-slip and has low thermal conductivity.

The knife features a leather sheath featuring a 9.3cm metal firelighter from market leader Light My Fire, which fits into a large, snug leather ring firmly integrated into the piping.

These features make the BRONCO Boker a tool for survival in an environment also of wild nature, compact, versatile and complete, at the height of any situation.

Intended use: Utility

Type of production: Industrial
Country of production: Germany - Solingen
Blade: CPM 3V 62 / 63HRC ful tang
Blade finish: Satin
Handle: TPE
Blade length: 113mm.
Blade thickness: 3.4mm.
Total length: 230mm.
Weight: 147g.
Sheath: in leather, with flintlock
Packaging: cardboard box with Boker logos
Note:

The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.

The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.

The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stonewashed stainless steel
Blade Length: 90mm.
Blade thickness: 3.3mm.
Length when closed: 121mm.
Total length: 211mm.
Weight: 167g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Serge Panchenko

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: Satin
Handle: G10
Blade length: 78.6mm.
Blade thickness: 4mm.
Length when closed: 108mm.
Total length: 188mm.
Weight: 135g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, Nylon pouch with zipper
Notes: Design by Jesper Voxnaes

The various models of the Magnum Collection have been adorning the windows of countless knife enthusiasts for many years. This year's collector's knife was designed by Brian Efros of Colorado and combines well thought out construction with high quality materials and perfect workmanship. The full-time cutler has been designing and manufacturing his own knives since 2008 and is now known far beyond the country's borders. Full order booklets, perfect workmanship and individual implementation ensure that his hand-made pieces reach the best prices internationally.

The Magnum Collection 2022 is an outdoor knife with an extremely robust drop point blade in satin D2. The screwable titanium handguard and the pronounced indentation of the fingers prevent involuntary blade slipping and thus safety at work. The OD green grip scales of the full tang construction are made of textured micarta and are held in place by decorative titanium screws. The combination of ergonomic design and pleasing shape also offers an exceptionally fuller grip feel. This unique collector's knife is strictly limited to 1999 pieces worldwide. Comes with a high quality leather sheath in an exclusive collector's box and with a certificate of authenticity.

Intended use: Collection / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: full tang in D2 steel
Blade finish: satin finish
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4mm.
Total length: 237mm.
Weight: 191 g.
Sheath: in black leather
Packaging: gift box with guarantee certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copies

Intended Use: Sporting/collection

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade finish: stonewashed
Handle: aluminum with wood insert
Blade length: 91mm.
Blade thickness: 3.6mm.
Total length: 220mm.
Weight: 123g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Eran Manasherov

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening system

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel M390
Blade treatment: stonewashed
Handle: titanium and carbon fiber
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Closure: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening system

Intended use: Utility

Type of production: Industrial
Country of production: Germany - Solingen
Blade: RWL-34 61 / 62HRC stainless steel ful tang
Blade finish: Satin
Handle: Micarta
Blade length: 79mm.
Blade thickness: 2.4mm.
Total length: 174mm.
Weight: 63g.
Sheath: in leather, with UltiClip attachment
Packaging: cardboard box with Boker logos
Notes: Design by Alex Kremer

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper Voxnaes

Today, Chad Los Banos' practical Boker Plus Subcom can definitely be called one of the cornerstones of Boker Plus. The continued popularity of this versatile pocket knife has prompted Boker to put this ultra-compact classic back into production in a modernized version. The Boker Plus Subcom 2.0 comes with a short D2 steel blade with a discreet pearl finish. It opens with the help of the thumb pin on both sides and is securely locked in place by the framelock's 2mm thick steel plate. The textured black Zytel handle is supplied with three-dimensional milling.

Intended use: Sports

Blade: D2 steel 59-60 hours
Handle: stainless steel and Zytel
Blade length: 58mm.
Blade thickness: 2mm.
Closed length: 68mm.
Total height of the lung: 117 mm.
Balance: -
Pesos: 69 g.
Closure: frame lock
Clip: removable and reversible in stainless steel
Sheath: -
Grade: -

Intended Use: Training

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -

Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.

The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.

The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.

The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.

The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton case

The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. In this version it is equipped with a frame lock. With lanyard hole.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: in steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 60g.
Clip: -
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Note: -