Movies and Videogames
-
Harry Potter - First Wand Collection - Harry Potter's Magic Wand with Ollivander's Box - NN9421
“It is the wand that chooses the wizard, Mr. Potter.”
For the first time ever, you can now take home a faithful replica of Harry Potter's first wand from the movies, before changes were made to the design for the third film: The Prisoner of Azkaban.
Enclosed in an Ollivander box, the velvet interior and delicate ribbon complement the iconic design of the wand.
Never-before-seen design: this long-awaited wand has been at the top of fans' wish lists for years.
Made from hand-painted resin, this wand is a faithful reproduction of the one Harry buys from Ollivander's wand shop in the first film.
Length: approximately 1.3 inches.
Diameter: approx. 1.9cm.
Weight: approx. 45g.
Included in the box: Magic Wand, Ollivander's Box, Outer BoxNN9421 -
Harry Potter - First Wand Collection - Hermione Granger's Magic Wand with Ollivander's Box - NN9422
“It's Leviosa, not Leviosaaa!”
Now, for the first time, you can take home our authentic replica of Hermione Granger's first wand, which appeared in the first two Harry Potter films.
Enclosed in an Ollivander box, the velvet interior and delicate ribbon complement the iconic design of the wand.
A never-before-seen design, this long-awaited wand has been at the top of fans' wish lists for years.
Made from hand-painted resin, this wand is a faithful reproduction of the film version of Hermione's first wand.
Length: approximately 34.5cm.
Diameter: approximately 1.9cm.
Weight: approximately 45g.
Included in the box: Magic Wand, Ollivander's Box, Outer BoxNN9422 -
Harry Potter - First Wand Collection - Ron Weasley's Magic Wand with Ollivander's Box - NN9423
Be careful if you try to cast the Slug Eater curse with this wand!
Complete with a broken tip and adhesive tape, this wand is an authentic replica of Ron Weasley's first wand, which appeared in the first two Harry Potter films.
Enclosed in an Ollivander's box, the velvet interior and delicate ribbon complement the iconic design of the wand.
A never-before-seen design: this long-awaited wand has been at the top of fans' wish lists for years.
Made from hand-painted resin, this wand is a faithful reproduction of the movie version of Ron's first broken wand, complete with enchanted duct tape!
Specifications
Length: approximately 33.5cm.
Diameter: approximately 1.6cm.
Weight: approximately 45g.
Included in the box: Magic Wand, Ollivander's Box, Outer BoxNN9423 -
Hollywood Collectibles Group - Rambo - First Blood - John Rambo Signature Limited Edition - Knife
The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.
In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”
The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.
Intended use: Collection
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.RB_9423- -
Hollywood Collectibles Group - Rambo III knife - SIGNATURE John Rambo - Knife
Official reproduction, made under film license by Hollywood Collectibles, of the knife used in the film "Rambo III". This model features a signature on the blade of John Rambo and is a limited edition.
Intended use: Survival/Collection
Blade: 420J2 stainless steel
Country of production China
Handle: in wood, with stainless steel guard and knob
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinematographic license
Limited Edition: blade and scabbard signed "John Rambo", limited and numbered edition made in 10,000 copiesRB_9425 -
Hollywood Collectibles Group - Rambo 5 knife - Last Blood BOWIE - knife
Original and official reproduction under film license of the knife used in the Rambo film - Last Blood
Intended use: Survival/Collection
Blade: 420 stainless steel.
Handle: synthetic
Blade length: 200mm.
Blade thickness: 5.5mm.
Total length: 360mm.
Balancing: advanced
Weight: 650.
Sheath: in leather
Notes: Standard Edition - Official product with Lionsgate cinema licensesRB9416B -
Hollywood Collectibles Group - Rambo 5 Last Blood - HEARTSTOPPER Standard Edition - knife
Original and official reproduction under movie license of the knife used in the movie Rambo - Last Blood
Intended use: CollectionProduction type: Industrial
Country of Production: China
Blade: Full tang stainless steel 7Cr17MoV
Blade treatment: Dual Tone
Handle: G10
Blade length: 229mm.
Blade thickness: 5.5mm.
Total length: 381mm.
Balance: Advanced
Weight: 800g.
Scabbard: leather
Package: Cardboard box with Rambo Last Blood logos
Notes: Original and official product, with Lionsgate movie licensesRB9415 -
Neca - Legolas pewter statue - 60 cm - Limited Edition - The Lord of the Rings
NECA is proud to work with some of the best sculptors in the world to craft this stunning line of museum quality statues.
Imposing statue of Legolas taken from "The Lord of the Rings" and produced by Neca in 2005.
This detailed sculpture is made entirely of pewter with a wooden base.
Limited series
Dimensions:
60 x 43.50 cm (23.40 x 16.97 inches)
Weight about 15kg
NEC-LEG€450.00Only 2 leftOnly 2 left -
Maserin - Diabolik knife - Walnut - 24k gold engraving - N690 steel - 999LG - knife
On the occasion of the theatrical release of the highly anticipated film Diabolik, directed by the Manetti Bros with Luca Marinelli, Miriam Leone and Valerio Mastandrea, we present the new version of Diabolik's knife, one of the most loved figures by fans of noir comics. Created in collaboration with the Astorina publishing house, we offer the new official "replica" version of the famous Throwing Knife of the King of Terror.
The new “999 \ LG Diabolik” throwing knife in special edition, replica features and style of the knife drawn in the original comic strips. Unlike the model made for the previous 50th, we have made some important changes. Like the logo of the anti-hero, Diabolik, in 24k gold on the knife blade and the elegant walnut handle.
Type of production: Industrial
Production Lama: Italy
Blade: N690 satin-finished stainless steel with 24K gold Diabolik engraving
Blade treatment: -
Handle: walnut wood
Blade length: 160mm.
Blade thickness: 5mm.
Closed length: -mm.
Total length: 290mm.
Thick when closed: -mm.
Balancing: -
Weight: 265g.
Closure: -
Clip: -
Sheath: nylon, made in Italy, by Radar
Packaging: cardboard box with Maserin and Diabolik logos
Notes: Officially licensed collectible / exhibition productMA-999LG -
Fantastic Animals and Where to Find Them - Albus Dumbledore Magic Wand - Collector Box NN9906
An authentic reproduction of Albus Dumbledore's Magic Wand used in the movie "Fantastic Beasts Wands"
It is made of resin and has a length of 36 cm.
Comes with a cardboard box and Olivander velvet.It is an officially licensed product Warner Bros Entertainment Inc.
Fantastic Beasts (Fantastic Beasts) is a fantasy film series directed by David Yates, written by JK Rowling and produced by Warner Bros. Started in 2016 with Fantastic Animals and where to find them and continued in 2018 with Fantastic Animals - Grindelwald Crimes, will be composed from five films [1].
It is a spin-off of Harry Potter inspired by the depth manual Fantastic Beasts and Where to Find Them, both written by Rowling. The series is set in the Magic World, a universe shared with Harry Potter, but some sixty years earlier in the internal chronology, in a period of time ranging from 1926 to 1945. The plot follows the magizoologist Newt Scamander in his adventures around for the world in search of magical creatures and in his efforts to thwart the dark wizard Gellert Grindelwald.NN9906 -
Harry Potter - Magic Wands Dark Wizard Wand Collection NN7351
The set includes a wall display in the shape of the Black Mark and 5 sticks, the baton of Voldemort and the 4 of the Death Eaters:
The display measures 43 cm high and 16.5 cm wide. The sticks measure about 38 cm in length.It is an officially licensed product Warner Bros Entertainment Inc.
NN7351 -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430 -
Fantastic Beasts and Where to Find Them - Magic Wanders Set with Exhibitor - NN5068 - Harry Potter
Authentic Official Reproductions of the 5 Magic Chopsticks Used in Fantastic Fantasy Movies and Where To Find Them
Made of hand-painted polyvinyl resin, they have a length of 35.5 / 38 cm. And are equipped with a wall display with MACUSA metal coat.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5068 -
Fantastic Beasts and Where to Find Them - Porpentina Goldstein Magic Wand - NN5624 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Goldstein used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5624 -
Fantastic Beasts and Where to Find Them - Seraphina Picquery Magic Wand - NN5630 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Seraphina Picquery used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5630 -
Fantastic Beasts and Where to Find Them - Percival Graves Magic Wand - NN5628 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Percival Graves used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5628 -
Fantastic Beasts and Where to Find Them - Queenie Goldstein Magic Wand - NN5626 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Queenie Goldstein used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5626 -
Fantastic Beasts and Where to Find Them - Newt Scamander Magic Wand - NN5622 - Harry Potter
Authentic Official Reproduction of the Portable Magic Wand of Newt Scamander used in Fantastic Animals and Where To Find Them
Made of hand-painted polyvinyl resin, it has a length of 35.5 cm and is equipped with a Collector Box.
It is a Noble Collection product, licensed by Warner Bros. Entertainment Inc.
NN5622 -
Marto - Highlander - Kurgan Sword - HI596 - fantasy sword
Kurgan, also known as Victor Kruger, is Connor McCleod's main antagonist in the movie Highlander - The Last Immortal, in which he is played by actor Clancy Brown.
Kurgan is defined by Ramírez (McCleod's mentor) as "the strongest of all immortals and the most cruel of warriors".
In addition to the first film, he is also the protagonist in the novels and comics taken from the film series, in which his story of battles, scars and pain is best told, mostly to his enemies.
Blade: 440A stainless steel
Blade length: 950 mm
Total length: 1240 mm
Handle length: 21 cm with leather cover
Total length: 25 cm
Guard and knob: metal
Sword weight: 2500 gr
Production: SpainHI596 -
Star Wars - To Go Cup - 475 ml
The Star Wars™ To Go Cup can hold a solid cup of coffee, tea or another hot beverage to help fans stay attentive all day while on the journey towards new adventures. 475 ml of any hot drink stays warm in the cup guarded by a Storm Trooper, Master Yoda or Darth Vader himself. The cup is made out of hard, durable plastic, and the lid can be twisted off for easy filling, refilling and thorough cleaning. The clip on the lid flips back to give access to the hot drink and keeps the drink safely inside when once again clicked into place. Volume: 475 ml Dimensions: Ø 94 x 185 mm Material: PP, Silicone BPA and Phthalate free. No PVC used.4778CUPSpecial Price €6.89 Regular Price €9.01Only 6 leftOnly 6 left -
Harry Potter - House Crest Bookmarks Collection - NN8725
Set of five bookmarks - made of metal, plastic and cardboard - representing the four houses of magic and Hogwarts School. Content in an elegant box of gift / collection.
Dimensions: 17.5 x 3.5 cm.
It 'a product officially licensed Warner Bros. Entertainment Inc.
NN8725 -
Marto - Conan - hand made sheath for the Atlantean Sword of Conan
Faithful reproduction of the sheath of the Conan sword used by Arnold Schwarzenegger in the movie Conan the Barbarian. Product handcrafted using the finest quality leather. Thanks to very good quality and precise stitching this scabbard perfectly adapted to Atlantean Sword produced by Marto and Windlass.
Mareiali: leather and skins
Production: Spain
Total length: 76 cm
Weight: 256 gr.
- Note: This product only provides the sheath, the sword is sold separately.V60116 -
Neca - Kill Bill The Bride 18" Figure - Prop Replica
Action figure by Beatrix Kiddo best known as the "Sposa", ancor più known as the Black Mamba performed by Uma Thurman in Quentin Tarantino's Kill Bill, member of the squadra delle Vipere Assassine. I detail the sculptural rendono that this modello a faithful reproduction. Altezza 45 centimetri circa, with accessories.
Product: Figure d'azione
Theme: Kill Bill
Height: 45 cm (18 inches)
Weight: 1.5kg
Material: PVC
Confezione: Scatola con finestra
Note: future production from 200549286€139.34Only 2 leftOnly 2 left -
Harry Potter - Gryffindor Hat Yellow / Red - Cinereplicas
Harry Potter - Gryffindor Hat Yellow / Red - Cinereplicas
Reproduction official gloves and hat of the house of Gryffindor (Harry Potter, Hermione Granger, Ron Weasley and other students)
On the hat is sewn the heraldic logo of Gryffindor House.
HAT HAT WINTER
one size fits all "elastic" adapted from 8/10 years and up
100% acrylic
HP-CA -
Harry Potter - Gryffindor Gloves Yellow / Red - Cinereplicas
Harry Potter - Gryffindor Gloves Yellow / Red - Cinereplicas
Reproduction official glove of the house of Gryffindor (Harry Potter, Hermione Granger, Ron Weasley and other students)
On the gloves is sewn the heraldic logo of Gryffindor House.
PAIR OF GLOVES
100% acrylic "ultra soft" with 2 ends' special conductive fabric for use with any TOUCH SCREEN!
HP-GL -
Harry Potter - Gryffindor Hat + Gloves Yellow / Red - Cinereplicas
Harry Potter - Gryffindor Hat + Gloves Yellow / Red - Cinereplicas
Reproduction official gloves and hat of the house of Gryffindor (Harry Potter, Hermione Granger, Ron Weasley and other students)
On the gloves and on the hat is sewn the heraldic logo of Gryffindor House.
PAIR OF GLOVES
100% acrylic "ultra soft" with 2 ends' special conductive fabric for use with any TOUCH SCREEN!
HAT HAT WINTER
one size fits all "elastic" adapted from 8/10 years and up
100% acrylic
HP-GLCA -
United - Mace of the Defiler Azog UC3015 - The Hobbit - sword fantasy
United - Mace of the Defiler Azog UC3015 - The Hobbit - sword fantasy
Official product, produced by United Cutlery, the Mazza Azog view of the film trilogy The Hobbit
This is based on the official replica prop used for the film. The product is made of reinforced polyresin and is sold with a stand with a graphic pattern that reproduces the scars and tattoo Azog. The package includes a certificate of authenticity.
- UC3015 Azog Mace of the Defiler
- Overall length: 101 cm
- Mace Head: 33 cmUC3015 -
Marto - Templar sword scabbard and belt - V584
Scabbard and belt for Marto Templar sword.
SCABBARD
Materials: wood (leather-covered) and nickel-plated metal
Total length: 98cm.
Width: 4.2cm. to 5.3cm.
Thickness: 1.7cm.
Weight: 351g. (610g. including belt)TWO-PART BELT
Materials: leather and nickel-plated metal
Lengths: 120,5cm. and 34,5cm.
Weight: 259g.Note: product includes scabbard only, sword to be purchased separately.
V584 -
Museum Replicas Windlass - 100298 Monks Robe Red - Medieval clothing
Museum Replicas Windlass - 100298 Monks Robe - Medieval clothing This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer. Completely made of heavy brown cotton, has a hood and rope belt.100298R -
Lord of the Rings - Pendant - The One Ring intertwined - products from films
"One Ring to rule them all, One Ring to find them, One Ring to bring them all and in the darkness bind them."
Shaped pendant double ring of power, woven together in an indissoluble way, with inscriptions elven chain and external stainless steel. The rings are both made of sturdy stainless steel gold plated and silver plated and have an eye for the chain welded to outside. Are therefore not usable as normal rings and can not be divided between them.
Comes in a gift box with logos and symbols Lord of The Rings, is an official product under license from New Line Cinema10900 -
Windlass - Altair Under Tunic
This under tunic is from Assassin's Creed and worn by Altair the Assassin. His long sleeve under tunic is a soft gray and made of 100% cotton. Coordinates with the Altair Over Tunic with Hood #883002, which is also shown in the picture. The complete outfit is shown here, but to get the look you have to purchase all the pieces or look in our Complete Outfits for Men section. Choose from sizes S/M or L/XL. Key Features: Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by Altair the Assassin883001 -
Harry Potter - Marauder's Map with showcase
Harry Potter - Marauder's Map with showcase
Faithful reproduction of the Marauder's Map is from the Harry Potter saga.
Made with parchment paper.It 'an officially licensed product with Warner Bros Entertainment Inc.
The Marauder's Map (Marauder's Map) is a map created by the group they belonged to James Potter (Harry's father, "Prongs" - in the original English Prongs), Sirius Black (Harry's godfather, "Fleeced" - Padfoot) Remus Lupin ("Moony" - Moony) and Peter Pettigrew (Peter Pettigrew "Wormtail" - Wormtail).
7882 -
Harry Potter - Ron Magic Wand with Ollivander's Box - NN7462
Harry Potter - Ron Magic Wand with Ollivander's Box
An authentic reproduction of the Magic Wand Ron Weasley used in the film series, "Harry Potter ™"
It 'made of resin and has a length of 36 cm. Comes with original box Ollivander.
It 'an officially licensed product with Warner Bros Entertainment Inc.
NN7462 -
Lord of the Rings - Aragorn's Ring 19mm
Also known as the ring of Barahir.
Originally it was given to Barahir by Finrod Felagund as a reward for saving his life in Dagor Bragollach. From generation to generation came into the hands of the line of Isildur, and then Aragorn.
The ring, depicting two snakes, is produced in metal covered with a hypoallergenic silver swarovski emerald green stone set in the middle.
Inner diameter of 19 mm.
Is accompanied by a package composed of a treasure chest hardcover depicting the image of "Middle Earth", a velvet bag with the company logo, "The Lord of The Rings" and a certificate that guarantees its authenticity.
It 'an officially licensed product accompanied by New Line Cinema.
4511-19 -
Neca - Bracelet official from the movie 300 - produced by stretch film
Into Bracelet 300 official product from Neca p> Into - Dimensions: 22,4 x 4,4 cm p> Into - material: vinyl p>00300Special Price €18.85 Regular Price €37.70Only 2 leftOnly 2 left -
Weta Workshop - Ricette di Casa Baggins - Lo Hobbit - Il Signore Degli Anelli
Direttamente dalla Nuova Zelanda, i prodotti ufficiali con licenze cinematografiche Warner Bros e New Line Cinema del "Lo Hobbit" e de "Il Signore Degli Anelli" realizzati dalla Weta Workshop, lo studio che si occupa di ideare e realizzare fisicamente tutti gli oggetti di scena e gli effetti speciali per i film di Peter Jackson.
Gli Hobbit sono creature buffe e spensierate e tutto, per loro, ruota attorno al cibo. Ecco per voi tre tradizionali ricette custodite a Casa Baggins e cucinate con cura da Bilbo Baggins: * Agnello Stufato * Gallina Ripiena (o un altro volatile a vostra scelta) * Torta di Pasticceria Realizzate in pesante cartone lucido, le tre ricette - presenti anche nel film - sono state disegnate da Daniel Reeve e scansionate poi in alta definizione. Le misure delle tre ricette sono di 29.7x21cm ciascuna.10066 -
Marto - Conan - Atlantean Sword Bronze - 60116 - fantasy sword
Marto's official reproduction of Conan's sword, used by Arnold Schwarzenegger in the movie Conan the Barbarian
Blade: 440 stainless steel
Production: Spain
Blade length: 72.5 cm
Total length: 103 cm
Handle length: 21.5 cm
Guard and knob: in bronze-colored zamak alloy
Sword weight: 3.5 kg60116 -
Harry Potter - Voldemort's Wand - Olivander Box - NN7331
An authentic reproduction of Voldemort's Wand used in the film series, "Harry Potter ™"
E 'made from resin and has a length of 36 cm. Comes with original box Ollivander.
It 'a product officially licensed Warner Bros. Entertainment Inc.
Lord Voldemort (/ˈvoʊldəmɔːr/, or /ˈvoʊldəmɔːrt/ in the films) (born Tom Marvolo Riddle) is a fictional character and the central main antagonist in J. K. Rowling's series of Harry Potter novels. Voldemort first appeared in Harry Potter and the Philosopher's Stone, which was released in 1997. Voldemort appears either in person or in flashbacks in each book and its film adaptation in the series, except the third, Harry Potter and the Prisoner of Azkaban, where he is only mentioned. Voldemort is the archenemy of Harry Potter, who according to a prophecy has "the power to vanquish the Dark Lord". Nearly every witch or wizard dares not utter his unmentionable name, and refers to him instead with such expressions as "You-Know-Who", "He-Who-Must-Not-Be-Named" or "the Dark Lord". Voldemort's obsession with blood purity signifies his aim to rid the wizarding world of Muggle (non-magical) heritage and to conquer both worlds, Muggle and wizarding, to achieve pure-blood dominance. Through his mother's family, he is the last descendant of wizard Salazar Slytherin, one of the four founders of Hogwarts School of Witchcraft and Wizardry. He is the leader of the Death Eaters, a group of evil wizards and witches dedicated to ridding the Wizarding World of Muggles and establishing Voldemort as its supreme ruler. According to Rowling, the 't' in "Voldemort" is silent, as it is in the French word for death, "mort". Jim Dale pronounced it so in the first four US audiobooks, yet the characters in the film version of Harry Potter and the Philosopher's Stone pronounced the "t" — after which Dale changed his audiobook pronunciation accordingly.
NN7331 -
Harry Potter - Draco Malfoy Magic Wand with Olivander Box - NN7256
An authentic reproduction of the Magic Wand Draco Malfoy used in the movie series "Harry Potter ™"
It is made of resin and has a length of 36 cm. It comes with original Olivander box.
It is a product licensed by Warner Bros Entertainment Inc.
Draco Lucius Malfoy is a character in J. K. Rowling's Harry Potter series. He is a student in Harry Potter's year belonging in the Slytherin house. He is frequently accompanied by his two cronies, Vincent Crabbe and Gregory Goyle, who act as henchmen. Draco is characterised as a cowardly bully who manipulates and hurts people to get what he wants; nevertheless, he is a cunning user of magic. He was played by Tom Felton in the Harry Potter film series.
NN7256 -
Harry Potter - Sirius Black Magic Wand with Ollivander's Box - NN7081
An authentic reproduction of Sirius Magic Wand used in the movie "Harry Potter and the Prisoner of Azkaban ™"
It is made of resin and has a length of 36 cm. Comes with original box Ollivander.
It is an officially licensed product with Warner Bros Entertainment Inc.
Sirius Black, nicknamed Padfoot because his Animagus form takes the shape of a dog, is the last heir to the House of Black, a once notable pure-blood Wizarding family. He is the older brother of Regulus Arcturus Black and a cousin of Narcissa Malfoy, Andromeda Tonks, and Bellatrix Lestrange. He rejected his family's pure-blood elitism and reverence for the Dark Arts. In contrast to his home life, Sirius greatly enjoyed life at Hogwarts. He was proud of the fact that he was the only Black to be sorted into Gryffindor. He was inseparable from his best friend James 'Prongs' Potter and befriended Remus 'Moony' Lupin and Peter 'Wormtail' Pettigrew. He was mentioned by Rubeus Hagrid in the first novel, but did not appear until the third in the series, The Prisoner of Azkaban.
NN7081 -
Maserin - Siberian by Nicolai Lilin - 987 - Siberian Education - Knife
The collaboration between the writer Nicolai Lilin and Knives Maserin was born on 987 Siberian Knife. Knife shapes typically Siberian, has blade and scabbard with designs that reflect themes and symbols tradition of this land, cold and still largely mysterious; elements also present in figurative works and tattoos created by the author of the best selling book Siberian Education, then became blockbuster thanks to the wise directed by Gabriele Salvatores.
Intended use: Hunting / Sports / Collection
Type of production: Industrial production
blade: Italian blade: 440A stainless steel blade
Treatment: -
Handle: Wood Pau Santo
Blade length: 170mm.
Blade thickness: 4.5mm.
Closed Length: -
Overall length: 293mm.
Thick when closed: -
Balance: -
Weight: 288g.
Lock: -
Clip: -
Sheath: Leather
Package: Cardboard Box
Notes: Kolima Design by Nicolai Lilin
MA-987 -
Hobbit - Penna a forma di chiave di Erebor e segnalibri di Thorin Scudodiquercia - Il Signore Degli Anelli
Penna a forma di chiave di Thorin tratta dal film The Hobbit con Segnalibro lenticolare 3D
Prodotto ufficiale
Thorin II, soprannominato Scudodiquercia (Oakenshield) un personaggio di Arda, l'universo immaginario fantasy creato dallo scrittore inglese J.R.R. Tolkien e compare ne Lo Hobbit e ha una presenza minore anche ne Il Signore degli Anelli.
il figlio di Thrin II e nipote di Re Thrr, oltre che il capo della compagnia di nani, a cui si unisce anche lo hobbit Bilbo Baggins, che riconquist la Montagna Solitaria da Smaug il drago, dopo una lunga missione.
Personaggio austero, invadente, molto orgoglioso e altero rispetto ai suoi consanguinei che lo accompagnano nella missione[2], Thorin rispecchia perfettamente le caratteristiche dei membri della sua razza, soprattutto per quanto riguarda la necessit di difendere e di riconquistare il proprio tesoro e, in particolare, l'Archepietra, la pi grande gemma mai scoperta nella Montagna Solitaria.NC-03 -
Harry Potter - Severus Piton Magic Wand - NN8405
An authentic reproduction of Professor Snape's Magic Wand "
It is made of resin and has a length of 36 cm.
It comes with the original box used in the movie "Harry Potter and the Chalice of Fire"Is a product licensed by Warner Bros Entertainment Inc.
Severus Snape is a fictional character in J. K. Rowling's Harry Potter series. An exceptionally skilful wizard, his coldly sarcastic and controlled exterior conceals deep emotions and anguish. A Professor at Hogwarts School of Witchcraft and Wizardry, Snape is hostile to the series' protagonist, Harry, the moment he sets foot in Snape's classroom; this hostility is rooted in Harry's resemblance to Harry's father James, who bullied and harassed Snape during their time at Hogwarts. Though philosophically attracted to the Dark Arts and Lord Voldemort's ideology of wizard supremacy, Snape's love for Muggle-born Lily Evans, Harry's mother, eventually compels him to defect from the Death Eaters. Snape becomes a double-agent on behalf of Albus Dumbledore and the Order of the Phoenix, and protects Harry throughout the series.
NN8405 -
The Hobbit - Miniatura Spada di Thorin Scudodiquercia - apri lettere NN1207 - prodotto ufficiale
The Hobbit - Riproduzione in scala 1:3 della spada di Thorin Oakenshield utilizzata nel film "The Hobbit"
Lama: Acciaio Inossidabile 420J2
Supporto: confezione in legno
Lunghezza spada: 19 cm.
Prodotto accompagnato dalla licenza ufficiale "Lord of the Rings" della New Line CinemaNC-07 -
Weta Workshop - Map of the East Farthing - The Hobbit - 87-28-01191 - The Lord of the Rings
Direttamente dalla Nuova Zelanda, i prodotti ufficiali con licenze cinematografiche Warner Bros e New Line Cinema del "Lo Hobbit" e de "Il Signore Degli Anelli" realizzati dalla Weta Workshop, lo studio che si occupa di ideare e realizzare fisicamente tutti gli oggetti di scena e gli effetti speciali per i film di Peter Jackson.
Splendida mappa, realizzata in pesante carta pergamenata italiana di tipo "marina conghiglia" che ritrae i confini del Decumano Est della Contea degli Hobbit. Le dimensioni sono di 26x36cm.
Il Decumano Est il distretto orientale della Contea che si estende dalla Pietra dei Tre Decumani fino al corso del Brandivino.
Per gli Hobbit della Contea, il Brandivino fu sempre considerato come il confine tra il conosciuto e lo sconosciuto, e spesso coloro che vivevano nella Terra di Buck, anche se sulla sponda opposta, venivano considerati "strani".
Il nome Brandivino o Baranduin una parola sindarin che significa "fiume marrone dorato". Gli Hobbit della Contea gli diedero originariamente il nome di Branda-nn, "acqua di confine" nell'originale linguaggio Hobbitish. Questi cambi pi avanti ancora una volta il suo nome, diventando Bralda-hm, "birra inebriante" (nome, anche questo come quello sindarin, riferito al colore spesso marrone delle sue acque), che Tolkien rese in inglese con "Brandywine", diventato per traslitterazione Brandivino in italiano.
Nel Decumano Est sorgono le regioni dello Iale, la Palude, Terminalbosco, Campoponte e parte del Paese delle Verdi Colline; villaggi come Boschesi, Tassitani, Scary, Chianarana, Fossobianco, Scorta, Sirte, Fondangolo e Valsalice. Inoltre vi scorrevano l'Acqua, il Rio Cardo, il Rivo Lucente e il Rivo di Scorta.
Gli Hobbit del Decumano Est sono in gran parte di sangue Sturoi: grossi, con gambe pesanti e molti si fanno crescere una tipica barbetta. Inoltre, a quanto pare, furono i primi a creare fattorie e granai (nella Palude e lungo il Brandivino).
Curiosit: L'espressione strano come una notizia da Brea era comune nel Decumano Est.87-28-01191 -
The Hobbit - Ciondolo Thorin Scudodiquercia - Lo Hobbit - collana
Ciondolo ufficiale di Thorin Oakenshield in argento.
Thorin II, soprannominato Scudodiquercia (Oakenshield) un personaggio di Arda, l'universo immaginario fantasy creato dallo scrittore inglese J.R.R. Tolkien e compare ne Lo Hobbit e ha una presenza minore anche ne Il Signore degli Anelli.
il figlio di Thrin II e nipote di Re Thrr, oltre che il capo della compagnia di nani, a cui si unisce anche lo hobbit Bilbo Baggins, che riconquist la Montagna Solitaria da Smaug il drago, dopo una lunga missione.
Personaggio austero, invadente, molto orgoglioso e altero rispetto ai suoi consanguinei che lo accompagnano nella missione, Thorin rispecchia perfettamente le caratteristiche dei membri della sua razza, soprattutto per quanto riguarda la necessit di difendere e di riconquistare il proprio tesoro e, in particolare, l'Archepietra, la pi grande gemma mai scoperta nella Montagna Solitaria.NC-13 -
Kill Bill - Hattori Hanzo - Bill Sword - Practical Katana
Blade: carbon steel - not sharpened
Hamon: in style to notice
Hi: -
Blade length (without habaki): 68.5cm.
Motohaba: 3.1cm.
Sakihaba: 2.1cm.
Sori: 2cm.
Blade thickness: 8mm.
Kissaki: 4cm.
Tsukamaki length: 26cm.
Total length: 105cm.
Weight: 1120g.
Balance: advanced, 12cm from tsuba
Saya: black lacquered wood with gold-colored engravings
Tsuka-gawa: black leather on same (purebred leather) white
Sageo: gray cotton
Tsuba, Fuchi and Kashira: antique metal with gilding
Habaki and Menuki: golden metal
Seppa: golden metal
Notes: can be disassembled with a double mekugi - the sword is accompanied by a cotton bag - this sword is not accompanied by film licenses but we also offer it with a good quality levelKB-BILL€155.74Only 5 leftOnly 5 left -
Kill Bill - Hattori Hanzo - Bride Sword - Practical Katana
Faithful unofficial reproduction of the sword used in the film Kill Bill
Blade: carbon steel - not sharpened
Hamon: in style to notice
Hi: -
Blade length (without habaki): 68.5cm.
Motohaba: 3.1cm.
Sakihaba: 2.1cm.
Sori: 2cm.
Blade thickness: 8mm.
Kissaki: 4cm.
Tsukamaki length: 26cm.
Total Length: 103cm.
Weight: 1100g.
Balance: advanced, 12cm from tsuba
Saya: black lacquered wood with gold-colored engravings
Tsuka-gawa: black leather on same (purebred leather) white
Sageo: gold cotton
Tsuba, Fuchi and Kashira: antique metal with gilding
Habaki and Menuki: golden metal
Seppa: golden metal
Notes: removable with double mekugi - the sword is accompanied by a cotton bag - this sword is not accompanied by film licenses but we also offer it to you with a good quality levelKB-BRIDE-€155.74Only 3 leftOnly 3 left -
Kill Bill - Hattori Hanzo - Budd Sword - Practical Katana
Faithful unofficial reproduction of the sword used in the film Kill Bill
Blade: carbon steel - not sharpened
Hamon: in style to notice
Hi: -
Blade length (without habaki): 68.5cm.
Motohaba: 3.1cm.
Sakihaba: 2.1cm.
Sori: 2cm.
Blade thickness: 8mm.
Kissaki: 4cm.
Tsukamaki length: 26cm.
Total Length: 103cm.
Weight: 1115g.
Balance: advanced, 12cm from tsuba
Saya: black lacquered wood with gold-colored engravings
Tsuka-gawa: black leather on same (purebred leather) white
Sageo: gold cotton
Tsuba, Fuchi and Kashira: antique metal with gilding
Habaki and Menuki: golden metal
Seppa: golden metal
Notes: can be disassembled with a double mekugi - the sword accompanied by a cotton bag - this sword is not accompanied by a film license but we also offer it with a good quality levelKB-BUDD€155.74Only 5 leftOnly 5 left -
Weta Worshop - An Unexpected Journey Print - 87-28-01038 - The Hobbit - The Lord of the Rings
Direttamente dalla Nuova Zelanda, i prodotti ufficiali con licenze cinematografiche Warner Bros e New Line Cinema del "Lo Hobbit" e de "Il Signore Degli Anelli" realizzati dalla Weta Workshop, lo studio che si occupa di ideare e realizzare fisicamente tutti gli oggetti di scena e gli effetti speciali per i film di Peter Jackson.
"Bilbo Baggins non lo sa ancora, ma fissa la sua amata Hobbiton e respira la fresca aria del mattino, la sua vita sta per cambiare. Drasticamente."
L'inizio di tutto, in un poster che riassume le grandi aspettative di un piccolo Hobbit, con uno desiderio di esplorare fuori dal comune, non compreso dai suoi concittadini e che nemmeno lui immaginava di avere.
Il designer Weta Gus Hunter, gi impegnato nella trilogia del Signore degli Anelli, si occupato di tradurre in immagine uno dei momenti salienti della nuova avventura cinematografica di Peter Jackson "Lo Hobbit: un viaggio inaspettato".
La stampa artistica, contenuta in un pratico e protettivo cilindro di cartone, realizzata su carta di elevata grammatura. Dimensioni: foglio 59 x 29,7 cm / stampa 53 x 23.5 cm.87-28-01038 -
Film - Il Signore Degli Anelli. Il Ritorno del Re - VHS
Titolo: Il Signore degli anelli. Il ritorno del re
Titolo originale: The Lord of the Ring. The Return of the King
Paese, Anno: Stati Uniti - Australia, 2004
Regia: Peter Jackson
Principali interpreti: Elijah Wood; Billy Boyd; Dominic Monaghan; Sean Astin; Ian McKellen; Viggo Mortensen; Orlando Bloom; Liv Tyler; Cate Blanchett
Genere: Fantastico
Produzione: Medusa Home Entertainment, 2004
Durata: 201 min.2058€7.38Only 2 leftOnly 2 left -
Film - Il Signore Degli Anelli - Il Ritorno del Re - DVD
Titolo: Il Signore degli anelli. Il ritorno del re
Titolo originale: The Lord of the Ring. The Return of the King
Paese, Anno: Stati Uniti - Australia, 2004
Regia: Peter Jackson
Principali interpreti: Elijah Wood; Billy Boyd; Dominic Monaghan; Sean Astin; Ian McKellen; Viggo Mortensen; Orlando Bloom; Liv Tyler; Cate Blanchett
Numero dischi: 2
Genere: Fantastico
Produzione: Medusa Home Entertainment, 2004
Durata: 192 min.
Versione: Widescreen - Dolby Digital EX 5.1 Italiano/Inglese - PAL Area 2
Trama: Mentre Frodo e Sam continuano il loro cammino verso il Monte Fato per distruggere l'Anello, ignari della strada su cui il perfido Gollum li sta conducendo, l'ex Compagnia dell'Anello combatte una grande battaglia a Minas Tirith, capitale del regno di Gondor, contro l'esercito di Sauron che ha messo la città sotto assedio. Malgrado le numerose perdite la Compagnia cerca in ogni modo di distrarre Sauron per portare a termine la sua missione: gettare l'Anello nella gola del Monte Fato.
Premi e riconoscimenti:
2004 - Miglior Film Candidature [Academy Awards]
2004 - Miglior Film Oscar [Academy Awards]
2004 - Miglior Regia Oscar [Academy Awards] Peter Jackson
2004 - Miglior Sceneggiatura non Originale Oscar [Academy Awards]
2004 - Miglior Montaggio Oscar [Academy Awards] Jamie Selkirk
2004 - Miglior Trucco Oscar [Academy Awards]
2004 - Miglior Scenografia Oscar [Academy Awards]
2004 - Migliori Costumi Oscar [Academy Awards]
2004 - Migliori Effetti Speciali Visivi Oscar [Academy Awards]
2004 - Migliori Effetti Speciali Sonori Oscar [Academy Awards]
2004 - Miglior Montaggio del Suono Oscar [Academy Awards]
2004 - Miglior Colonna Sonora Oscar [Academy Awards]
2004 - Miglior Canzone Oscar [Academy Awards]
2004 - Miglior Film - Dramma Golden Globe
2004 - Miglior Regia Golden Globe Peter Jackson
2004 - Miglior Colonna Sonora Originale Golden Globe
Contenuti Speciali:
* Speciali di approfondimento (La ricerca è terminata - La visione del regista)
* Il viaggio del regista (Filmare "Il Ritorno Del Re")
* Speciale National Geographics (Il Signore Degli Anelli - Il Ritorno Del Re)
* Contributi (Il destino di Aragorn - Minas Thirith: la capitale di Gondor - La battaglia dei Campi di Pelennor - Sam il coraggioso - Eowyn la dama di bianca di Rohan - Cavalli digitali)
* Trailer cinematografici e spot televisivi
* Supertrailer (La trilogia de Il Signore Degli Anelli)
* I videogiochi di Electronics Art2059€7.38Only 1 leftOnly 1 left -
Lord of the Rings - Orecchini di Rivendell 724.45 - Il Signore degli Anelli
Riproduzione ufficiale italiana dietro licenza "New Line Cinema"
Gli orecchini, di 20 mm di diametro, sono realizzati in metallo anallergico e crisalli sintetici di color ambra.
Vengono accompagnati da una confezione regalo rettangolare di colore nero con logo "The Lord of The Rings" impresso in oro.4544 -
Lord of the Rings - Orecchini Foglia Elfica 702.50 - Il Signore degli Anelli
Riproduzione ufficiale italiana dietro licenza "New Line Cinema"
Gli orecchini, larghi 25mm e lunghi 35mm, sono realizzati in metallo anallergico ricoperti di argento e successivamente smaltati a caldo di verde
Vengono accompagnati da una splendida confezione composta da una scatola cartonata che rappresenta la mappa della terra di mezzo ed un sacchetto di velluto nero con il logo "The Lord of The Rings" impresso in oro.
Il prodotto viene inoltre accompagnato da un certificato che ne attesta l'autenticità e ne garantisce le origini.4509 -
Harry Potter - Bacchetta Magica di Ron Weasley NN8413
Un'autentica riproduzione della Bacchetta Magica di Ron Weasly utilizzata nel film "Harry Potter e il prigioniero di Azkaban™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola originale utilizzata nel film "Harry Potter e la pietra filosofale"
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.
Ronald Bilius Weasley (Bilius deriva da uno zio paterno morto ventiquattr'ore dopo aver visto un gramo), abbreviato in Ron, è un personaggio della serie di romanzi di Harry Potter, scritta da Joanne Kathleen Rowling. Ron è il sesto di sette figli della famiglia Weasley, nato il 01/03/80, ed è il migliore amico di Harry. Insieme a Hermione è tra i principali protagonisti della saga. Ron è alto, magro e, come tutti i Weasley, ha i capelli rossi e molte lentiggini sul viso. Ha gli occhi azzurri. A Hogwarts non è uno studente modello.NN8413 -
Harry Potter - Bacchetta Magica di Lord Voldemort NN8403
Un'autentica riproduzione della Bacchetta Magica del malvagio Voldemort's Wand™ utilizzata nel film "Harry Potter e il calice di fuoco™"
E' realizzata in resina ed ha una lunghezza di 36 cm.
Viene fornito con la scatola originale
E' un prodotto con licenza ufficiale Warner Bros Entertainment Inc.NN8403 -
Harry Potter - Draco Malfoy's Wand
An authentic reproduction of the Magic Wand of Draco Malfoy ' "
made from resin and has a length of 36 cm .
It comes with the original box used in the movie " Harry Potter and the Sorcerer's Stone " It 's an officially licensed product with Warner Bros Entertainment Inc.NN8409




















































































