pocket knives
Boker - Trapper Uno Slipjoint - Curly Maple O1 - 110297 - knife
Intended Use: EDC/Gentleman
Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Carbon steel O1
Blade treatment: Meteoric Black Stonewashed
Handle: Stained maple burl
Blade length: 80mm.
Blade thickness: 2.1mm.
Total length: 190mm.
Weight: 69g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Boker logos, zippered knife case
Notes: -BO-110297Maserin - Sessantesimo - FatCarbon & Gold HNCF - 195/SUPERTiN - knife
Intended use: sharpener/sportsman
Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -MA-195/TiNMaserin - Sessantesimo - FatCarbon & Blue HNCF - 195/AlTiN - knife
Intended use: sharpener/sportsman
Type of production: Industrial
Country of Production: Italy
Blades: Stainless steel 420
Blade treatment: Nanoceramic HNCF
Handle: Carbon Fiber "FatCarbon"
Blade Length: 65mm.
Blade thickness: 2.2mm.
Length closed: 90mm.
Total length: 200mm.
Thickness when closed: 8mm.
Weight: 32g.
Closure: Slip Join
Clip: absent
Sheath: leather pouch
Packaging: cardboard box with Maserin logos
Notes: -MA-195/AlTiNViper - Orso 2 by Jens Anso - Dark Stonewashed Titanium - V5997TI - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5997TIViper - Orso 2 by Jens Anso - 3D Titanium - V5996TI3D - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Satin finish
Handle: Titanium GR5 with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5996TI3DBoker - Barlow - Tirpitz Damascus - Slipjoint EDC - 117942DAM - Knife
The great interest in Tirpitz-Damast damask over the years has convinced Boker to design another model supplied with the historic damask steel. The Boker Barlow Prime Tirpitz Damascus, much more compact than the original model, convinces not only in the collector's showcase, but also as a gentleman's knife. The blade made in the exclusive Tirpitz Damascus, is supplied with a modern elongated ricasso and opens with a nail notch. Damascus made with the material acquired from Tirpitz, sister ship of the legendary Bismarck which was the largest warship ever launched for the German Navy.
Soon after the end of World War II, a Norwegian specialist company began cannibalizing the ship, which sank off the Norwegian coast, in order to make the high-alloy steel available for civilian purposes. Norwegian divers recovered parts of Tirpitz's special armor from the fjord for Boker. From these pieces of living history, Damascus blacksmith Boker exclusively forges an extraordinary damask with a fascinating history. The combination of Tirpitz steel with carbon tool steels also results in an extremely strong Damascus which, with a Rockwell hardness of 61 to 63 HRC, is up to any task in everyday use.
The operational safety of the history-rich slipjoint pocket knife is further enhanced by a 90 degree locking mechanism when opening and closing. The characteristic teardrop shape of the Barlow is attributable to the English pocket knives of the seventeenth century, which certainly makes it one of the oldest models ever. The name of the classic probably dates back to an enterprising knife manufacturer from Sheffield of the same name, who began exporting the sturdy knives to North America around 1800. There they immediately enjoyed great popularity and so the first Barlow models also appeared in the history of the Boker Manufactory. Solingen at the end of the 19th century.
This integral version of the timeless classic with a contoured black micarta handle body, which is milled from solid and also forms the signature Barlow bolsters. neither. Handmade in the Boker knife factory in Solingen.
Intended use: EDC / Gentleman / Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: Damascus
Handle: micarta and walnut
Blade length: 69mm.
Blade thickness: 2.2mm.
Total length: 125mm.
Weight: 32g.
Closure: SlipJoint (without blade lock)
Clip: -
Packaging: Cardboard box with Boker logos, fabric case with zip, papers
Note: limited editionBO-117942DAMBoker - Boxer Slipjoint EDC by Raphael Durand - Brown Micarta - 111029 - knife
Intended Use: EDC/Gentleman
Production type: Industrial
Country of Production: Germany - Solingen
Blade: Stainless steel M390 61HRC
Blade treatment: stonewashed
Handle: micarta
Blade length: 78mm.
Blade thickness: 3.0mm.
Total lenght: 185mm.
Weight: 71g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Package: Cardboard box with Boker logos
Notes: Design by Raphaël DurandBO-111029Boker Plus - Celos Slipjoint - G10 Jade - 01BO179 - knife
Intended Use: EDC/Gentleman
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: Satin finish
Handle: G10
Blade length: 67mm.
Blade thickness: 2.7mm.
Total lenght: 150mm.
Weight: 33g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Package: Cardboard box with Boker logos
Notes: -BO-01BO179Boker - Barlow Prime Slipjoint EDC - Green Micarta - 115942 - knife
Intended use: EDC/Gentleman
Production type: Industrial
Country of Production: Germany - Solingen
Blade: High carbon steel O1
Blade treatment: acid-wash
Handle: micarta
Blade length: 69mm.
Blade thickness: 2.2mm.
Total lenght: 125mm.
Weight: 35g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Package: Cardboard box with Boker logos, fabric pouch with zipper
Notes: -BO-115942Nitecore - NSH10 EDC Multiuse Titanium Snap Hook - carabiner - tool
NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.
Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.
Type of production: industrial
Country of production: ChinaFunctions:
* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriverMaterial: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5gNI-NSH10Mcusta - Tsuchi Damascus knife - Shinra Iron Wood - MC-0077DI - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0077DIMcusta - Tsuchi Damascus knife - MC-0114D - Forge Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0114DMcusta - Katana knife series - MC-0044C - Black / Green - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel laminated with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0044CMcusta - Katana knife series - MC-0042C - Blue / Orange - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel laminated with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0042CMcusta - Toyotomi Hideyoshi MC-0182G knife - SPG2 Powder Steel - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leatherMC-0182GNitecore - NTK05 EDC Ultra-Tiny Titanium Keychain Knife - cutter
Ultra-Tiny keyring knife, made of TC4 titanium alloy and made with precise CNC machining.
The NTK05 model uses a No. 11 scalpel blade, easily replaceable and accessible in the market.The comfortable 35-degree grip ensures stability and cutting precision.
The elegant and tapered design allows it to be attached to a key ring, to a backpack, to use it as a mini EDC or as a pendant.Type of production: industrial
Country of production: China
Blade: replaceable, in stainless steel, N.11 Scalpel Blade
Handle: unibody in titanium with the following sizes 55mm x 12mm x 3mm
Blade length: 20mm.
Blade thickness: 0.3mm.
Total length open: 96mm with blade completely extracted
Weight: 5g.
Clip: -
Packaging: Cardboard box with Nitecore logos
Note: -NI-NTK05Benchmade - 318 Proper Slipjoint Clip Point - Green Micarta - Folding Knife
Purpose: EDC / Gentleman
Type of production: Industrial
Country of Origin: USA
Blade: Stainless Steel CPM-S30V 58 / 60HRC
Blade treatment: satin finish
Handle: micarta
Blade Length: 73mm.
Blade thickness: 2.3mm.
Closed length: 98mm.
Total Length: 170mm.
Closure thickness: 10mm
Balance: -
Weight: 66g.
Closure: SlipJoint
Clip: -
Sheath: -
Packing: Cardboard box with Benchmade logos
Notes: -BM-318Mcusta - Series Katana - MC-0041C - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel laminated with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0041CMcusta - Tsuchi Green - MC-163D - knife
Mcusta - Tsuchi Green - MC-163D - knife
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0163DMcusta - Nami Small Damascus Japan - MC-0111D - knife
Mcusta - Nami Small Damascus Japan - MC-0111D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: steel hammered
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 74g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MC-0111DMcusta - Nami Large - MC-112D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0112DMcusta - Fusion Tsuchi Pink knife - MC-0162D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0162DMcusta - Tsuchi Black - MC-161D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0161DMcusta - Mod. Butterfly professional scissors in VG-10 Damascus - DDB-170D
Mcusta - Mod. Butterfly professional scissors in VG-10 Damascus - DDB-170D
Beautiful scissors made in Japan in Seki in the handicraft from Mcusta. For the production was chosen one of the best Japanese steels, the VG10 clad in steel to 37 layers Damascus. Each scissor is hand assembled, finished, sharp and controlled by the artisans of the team Mcusta.
Cutlery Collini Busto Arsizio and 'distributor for Italy brand Mcusta.
Material: Stainless VG10 and damask - 61HRC
Lama: smooth
Blade length: 7.3 cm
Total length: 6.5 inches - 17 cm
Sharpening: Piana
Weight: 56 gr.Notes: every scissor is packed in a box of balsa wood with certificate of authenticity
DDB-170DCarl Schlieper - Gentleman knife - folding two blades - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years, various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Intended use: Sports / Collection
Blade: 440A stainless steel
Production Lama Germany
Handle: wood and alpaca
Primary blade length: 70mm.
Secondary blade length:: 55mm.
Total length: 230mm.
Balancing: -
Weight: 106.
Closure: Back Lock
Clip:
Sheath: -
Note: -7117Mcusta - Tsuchi Damasco Japan - MC-0034D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Country of production: Japan
Handle: damask steel
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -MC-0034DLaguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBIMcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145GViper - Drop Knife - Partridge Feather by Silvestrelli - 5700INPN - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Overall in very good condition, no original box (will be delivered with an alternative Viper box, but it will not be its own) - Original sharpening, never used - First series, still in Sandvik steel (current production is in 1.4416 steel) - Checked and certified by our in-house laboratory.
Intended use: Collection/Sportsman/GentlemanType of production: industrial
Country of production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: made of Resin, with real Partridge feathers inside and stainless steel liners
Blade length: 49mm.
Blade thickness: 3mm.
Length when closed: 75mm.
Thickness when closed: 12mm.
Total length: 125mm.
Weight: 68g.
Closure: Liner Lock
Clip: absent
Scabbard: absent
Notes: Drowned in resin, two elegant Partridge feathers find their place - design by Fabrizio "Sylvester" Silvestrelli - Knife withdrawn from private collectionV5700INPNChris Reeve - Large Sebenza 21 Plain knife - Insingo - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection, Chris Reeve model out of production and no longer available on the market. In excellent condition, complete with original box, certificates, stickers, cleaning cloth, fluorinated grease and maintenance key - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008-CPBoker Plus - Celos Slipjoint - Titanium Limited - 01BO006 - knife
Intended Use: EDC/Gentleman
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel M390
Blade treatment: Satin finish
Handle: G10
Blade length: 67mm.
Blade thickness: 2.7mm.
Total lenght: 150mm.
Weight: 42g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Package: Cardboard box with Boker logos, nylon pouch with zipper
Notes: -BO-01BO006Mcusta - Petit Damascus knife - VG10 steel - Micarta Blue and Black - MC-0212D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0212DMcusta - Petit Damascus knife - VG10 steel - Micarta Orange and Black - MC-0211D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0211DMcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0146GMcusta - Take knife VG10 Damascus - Shinra Series - Stamina Wood - MC-0075D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0075DMcusta - Tsuchi Damascus knife - Shinra Stamina Wood - MC-0078D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0078DMcusta - Masamune Dates MC-0186D knife - VG10 Damascus SanMai - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leatherMC-0186DMcusta - Oda Nobunaga MC-0181G - SPG2 Powder Steel - Sengoku Series - knife
Intended use: sporting/collection
Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheathMC-0181GCase Cutlery - Stockman 3 blades Folding Knife - 2801 - knife
W.R. Case & Sons Cutlery Company was created at the beginning of the century, at a time when pocket knives were as indispensable as a watch. Over the years the company has established itself as a leading company in the market launch of new materials and innovative designs.
The company's roots date back to 1889, when enterprising brothers, William Russell (W.R.), Jean, John and Andrew, in the Case family began selling craft knives from the back of a van in northern New York. In January 1900, the brothers formed the Case Brothers Cutlery Company, thus founding the first family brand Case.
J.R. Case, which he called the company with the name of his father, W.R., formed the W.R. Case & Sons in the form in which it is known today. When the company moved to Bradford, Pennsylvania in 1905, the four Case brothers had made their family brands the most respectable names in cutlery in America.
At the beginning of World War I, the government appealed to the Case for the production of military knives for American fighters. During the flight of the "Molly Brown" in 1965, astronauts Gus Grissom and John Young used special Case knives in the NASA space mission. Case has garnered famous and avid collectors like former US President Dwight D. Eisenhower and country music star Randy Travis.
Intended use: sports / collection
Type of production: Semi-Industrial
Lama production: USA
Blade: 3 blades - stainless steel
Blade treatment: -
Handle: Blue Navy bone
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 90mm.
Total length: 160mm.
Thick when closed: 13mm
Balancing: -
Weight: 64g.
Closure: retention
Clip: -
Sheath: -
Packaging: cardboard box with Case logos
Note: -CA-2801Nitecore - NTK10 EDC Titanium Utility Knife - cutter
NTK10 is a brand new unibody titanium utility knife constructed via detail-oriented titanium machining. With strong rigidity, low density and high corrosion resistance, titanium alloy is ensured with a premium quality and widely used in outdoor gears as well as aerospace components.
NTK10 is equipped with a replaceable OLFA CKB-2 blade, which is produced by one of the top manufacturers of cutting tools with the highest quality and the most durable materials. The easy purchase and simple operation offer a convenient replacement of blades.
30-degree comfortable grip guarantees the cutting stability and precision. The retractable and smooth mechanism makes it one-handed operable for blade adjustment. The multiple locking grooves allow a free control of blade length with sharp precision while the blade lock keeps the blade away from accidentally sliding out of the body.
With an exquisite and compact body, NTK10 also has three areas of grooved edge design which increase the friction of the grip to prevent accidental drop of the knife. The dismantlable clip is perfectly applicable for drawing out and outdoor carrying.
In case of an emergency, use the tool to break the four corners of the window glass to enable a possible means of escape. The unique bottle opener feature is able to let you enjoy the extraordinary moment after your breathtaking adventure!
Type of production: industrial
Country of production: China
Blade: replaceable in stainless steel made by the Japanese OLFA
Blade treatment: -
Handle: unibody in titanium with the following measures 115mm x 29mm x 7mm
Blade length: 55mm.
Blade thickness: 2mm.
Total length: 170mm with blade completely removed
Weight: 67g.
Clip: titanium, removable
Package: -
Notes: bottle opener and glasses integrated into the handleNI-NTK10Chris Reeve - Small Inkosi - Insingo Blade - knife
Intended use: Sports / Collection
Type of production: Semi-Artisan
Country of production: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Blade treatment: stonewashed
Handle: titanium 6Al4V
Blade length: 70mm.
Blade thickness: 3.5mm.
Length closed: 95mm.
Total length: 165mm.
Thick when closed: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfibre cloth, maintenance kit
Note: -SIN-1022Viper - Orso Knife Black G10 - M390 - by Jens Anso V5968GB - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 90g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5968GBViper - Orso Knife Titanium - M390 - by Jens Anso V5966TI - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 120g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5966TIViper - Orso Knife Carbon Fiber - M390 - by Jens Anso V5966FC - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: carbon fiber
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 80g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5966FCKoji Hara - Bamboo Motif - Dagger Gentleman in Mother of Pearl - artisan knife
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Japan
Blade: Cowry-Y stainless steel
Blade treatment: -
Handle: Mother of Pearl
Blade length: 87mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 195mm.
Thick when closed: 11mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: -
Sheath: -
Package: -
Notes: model entirely handmade by Master Koji Harakoji-hara$780.58Out of stockMcusta - MC-0191C Slip Joint Knife Black / Red Wood - knife
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-0191CMcusta - MC-193C Slip Joint Knife Black / Green - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-193CMcusta - MC-192C Slip Joint Knife Black / Yellow - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-192C