Key Features:
* Ultralight powerbank with 20000 mAh capacity
* Carbon fiber frame and panels
* USB-A and USB-C dual output channels
* 20W Output + 18W Input from USB-C (PD) port
* 18W output from USB-A port (QC)
* Compatibility with PD charge and QC 3.0
* LED remaining power level indicator
* Low current charging mode for delicate electronics (Ex. Smartwatch, TWS headphones etc.)
* IPX5 waterproof
* Weighs only 157 grams; it is 45% lighter than traditional power banks of equal capacity and using a seamless carbon fiber unibody structure it has excellent resistance to pressure (200% higher than the Nitecore NB20000 model).

Technical specifications:
* Cell: Li-ion
* Capacity: 20,000mAh 3.85V (38.5Wh)
* Rated Energy: 13,500mAh 5V (TYP 2A)
* Inputs: USB-C: 5V⎓2.4A / 9V⎓2A
* Output: USB-C: 5V⎓3A / 9V⎓2.22A / 12V⎓1.68A
* USB-A: 5V⎓3A / 9V⎓2A / 12V⎓1.5A
* Double port: 5V⎓3A (MAX)
* Dimensions: 124mm x 60mm x 21.8mm
* Weight: 295.5g±5g
* Accessories: USB-C charging cable

Never let your phone or flashlight die!
The Nitecore CARBO 20000 power bank has an extraordinary 10,000 mAh battery capable of charging: 4.6 times an iPhone 14 Pro, 3 times a Huawei Mate 50 Pro, 9 times a Nitecore UT27 head torch and 3 times a Nitecore NL1835R battery. All this power is packed into a solid carbon fiber frame making it 45% lighter than traditional power banks, while smaller and thinner than a phone, with a sleek, modern minimalist design. An ultimate backup portable charger that is essential for the outdoor enthusiast, hiking, camping or rescuer who is e.g. on a search and rescue mission. It's also a great addition to an emergency kit.

Ready for any challenge!
Dual USB/USB-C Quick Charge output ports allow you to quickly charge two devices simultaneously with maximum compatibility with all electronic devices. When fast charging is not needed, the CARBO 20000 has a low current mode for sensitive devices such as bluetooth headphones and smart watches.

Lightweight and sturdy!
The carbon fiber outer panel makes the CARBO 20000 highly resistant to damage, abrasion and impact. It is also IPX5 rated water resistant and comes with a number of short circuit, overload and overheat protections.

* Can repel pests up to 5m away in just 10 minutes.
* Rechargeable batteries included 10000mAh (2x 5000mAh); rechargeable via USB-C and can be used as a power bank
* Indoor and outdoor modes to intensify the action depending on where you are.
* Uses ultrasonic frequencies and/or a mosquito repellent plate that lasts up to 6 hours

The Nitecore EMR10 is a portable, multifunctional device that provides protection from mosquitoes and other pests during your outdoor adventures. With its dual function of mosquito repellent and power bank, it is a must-have device for those who enjoy camping, hiking, and outdoor activities in general. Its ruggedness and water resistance make it ideal for all weather conditions. Nitecore's EMR10 is the perfect solution for enjoying nature without worrying about pesky insects and pests.

TECHNICAL SPECIFICATIONS.
Waterproofness: IPX5
Shock resistance: 1m
Input: 5V⎓2.4A / 9V⎓2A
Output: 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
Batteries included: 2x NL2150 5000mAh removable and replaceable batteries
Platelet heating temperature: 125°C
Ultrasound frequency: 25kHz, 40kHz
Protection zone: about 5m.
Dimensions: 16.8 x 5.8 x 3.3cm
Weight (without batteries): 149g.

INDOOR AND OUTDOOR MODES
Indoor mode: protection zone of 3.3m
Outdoor mode: 4.8m protection zone

PACKAGE CONTENTS.
* Nitecore EMR100
* 10xMosquito repellent platelets.
* 2x Nitecore NL2150 5000mAh batteries
* USB-C charging cable.
* Plastic termination protection.

* Can repel pests up to 5m away in just 10 minutes.
* Built-in 1800mAh rechargeable battery, rechargeable via USB-C
* MOLLE stand for easy transportation
* Uses a mosquito repellent plate that lasts up to 6 hours

The Nitecore EMR06 portable mosquito repellent is a great choice for outdoor enthusiasts and gardeners looking for a lightweight and portable mosquito repellent. With its highly efficient heating system, the EMR06 accepts readily available pyrethroid-based tablets, eliminating the need for volatile liquid refills. Weighing only 74g, the EMR06 features a MOLLE holder that can be clipped onto bags and straps for hands-free protection, creating a convenient pest-free zone in a radius area of up to about 5m.

The built-in battery recharges via USB-C and has a battery life of 3.5 hours, but it can be continuously powered at 5V from the USB outlet so there is never any interruption!

Whether you're hiking, camping, fishing, cooking or gardening, the EMR06 is a reliable solution for keeping insects away without weighing you down.

TECHNICAL SPECIFICATIONS.
Waterproofness: IPX5
Shock resistance: 1.5m
Input: 5V - 1A (5W MAX)
Built-in battery: 1800mAh 6.66Wh
Rated Capacity: 1800mAh 5V (TYP 1A)
Plate heating temperature: 135°C
Protection zone: about 5m.
Dimensions: 5.5 x 9.1 x 2.8cm
Weight: 74g.

PACKAGE CONTENTS.
* Nitecore EMR06
* 3xMosquito repellent tags.
* USB-C charging cable
* MOLLE system mount.
* Lanyard

FEATURES
* High-capacity USB-C rechargeable headlamp with superior performance.
* Maximum power output of 1,400 lumens.
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets that reflect light evenly.
* Built-in 4,000 mAh lithium-ion battery.
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓2A).
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 2 light sources and 3 special modes available.
* Designed with 4 power indicators to inform about the remaining battery charge
* Made of durable PC material with aluminum alloy front housing
* Compact and lightweight
* Impact resistant up to 2 meters in height
* Waterproof and dustproof grade according to IP68 standard

WEIGHTS AND DIMENSIONS
Dimensions: 83.4mm x 48.5mm x 43.9mm (Front Stand Included)
Weight: 146g (Front Stand and Elastic Band Included) / 12g (Front Stand Included)

ACCESSORIES INCLUDED
USB-C charging cable, Front Elastic Band

TECHNICAL SPECIFICATIONS.
LEDs: 2x primary white, 1x auxiliary red, all with a life cycle of 50,000 hours and an illumination radius of more than 100°
Operating Modes: 5 light powers on primary light + 2 special modes; 2 on red light
Powers and Durations Primary White: 1400 Lumens ( / ) -> 600 Lumens (11h.) -> 300 Lumens (16h.) -> 100 Lumens (38h.) -> 8 Lumens (180h.) -> SOS -> Beacon
Peak power: 3800 candelas
Maximum lighting distance: 130m.
Power and luminsa selection method: Two dedicated power, and light selection buttons
Body: plastic material with aluminum unibody front door
Battery: built-in, non-removable, 3.6V Li-Ion 4000mAh battery
Water resistance: as per IP68 standard
Impact resistance: withstands falls from 2m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator - Proximity sensor that automatically switches light output if it detects nearby objects

Key Features:
* Ultralight powerbank with a capacity of 10000 mAh
* Carbon fibre chassis and panels
* Dual USB-a and USB-C output channels
* 20W output + 18W input from USB-C port (PD)
* 18W output from USB-A port (QC)
* Compatibility with PD charging and QC 3.0
* LED residual power level indicator
* Low current charging mode for sensitive electronics (e.g. Smartwatch, TWS headset etc.)
* IPX5 waterproofing
* Weighs only 157 grams; it is 45% lighter than conventional powerbanks with the same capacity and by using a seamless carbon fibre unibody construction has excellent pressure resistance (200% higher than the Nitecore NB10000 model).

Technical Specifications:
* Cell: Lithium-ion
* Capacity: 10,000mAh 3.85V (38.5Wh)
* Rated energy: 6,400mAh 5V (TYP 1A)
* Input: USB-C: 5V⎓2.4A / 9V⎓2A
* Output: USB-C: 5V⎓3A / 9V⎓2.22A / 12V⎓1.68A
* USB-A: 5V⎓3A / 9V⎓2A / 12V⎓1.5A
* Dual port: 5V⎓3A (MAX)
* Dimensions: 124mm x 59mm x 11.5mm (4.88" x 2.32" x 0.45")
* Weight: 157g±5g (5.54 oz±0.1 oz)
* Accessories: USB-C charging cable

Never let your phone or torch die!
The Nitecore CARBO 10000 power bank has an amazing 10,000 mAh battery capable of charging: 2.3 times an iPhone 14 Pro, 1.5 times a Huawei Mate 50 Pro, 4.5 times a Nitecore UT27 head torch and 1.5 times a Nitecore NL1835R battery. All this power is packed into a solid carbon fibre chassis that makes it 45% lighter than traditional power banks, while being smaller and thinner than a phone, with a sleek, modern, minimalist design. The ultimate portable backup charger, essential for outdoor enthusiasts, hikers, campers or rescuers who are, for example, on a search and rescue mission. It is also a great addition to an emergency kit.

Ready for any challenge!
The dual Quick Charge USB/USB-C output ports allow you to quickly charge two devices at the same time with maximum compatibility with all electronic devices. When quick charging is not required, the CARBO 10000 has a low current mode for delicate devices such as Bluetooth headsets and smart watches.

Lightweight and robust!
The carbon fibre outer panel makes the CARBO 10000 highly resistant to damage, abrasion and impact. It is also water-resistant with IPX5 rating and comes with a range of short-circuit, overload and overheating protection.

KEY FEATURES:
* Dual tail switches enable intuitive operations specifically designed for law enforcement, hunting and tactical applications.
* Fourth generation of the first Smart Selector Ring (SSR) technology to quickly and smoothly select brightness levels and modes of operation.
* Maximum peak beam intensity of 65,200cd and maximum range of 510 meters
* 3 brightness levels, lock mode and TAC mode available.
* STROBE READY™ technology to enable quick access to STROBE mode (Patent No. ZL201320545349.4)
* Intelligent lithium-ion battery charging circuit via USB-C port.
* NITECORE 21700i lithium-ion battery included (NL2150HPi 5,000mAh).
* Built-in advanced temperature control (ATR) module (Patent No. ZL201510534543.6)
* Glass breakthrough on the head uses high-strength silicon nitride ceramic to ensure excellent performance.
* Constructed of aircraft aluminum alloy HA III military-grade hard anodized finish.
* Waterproof and dustproof rating according to IP68 standard (2 meters submersion)

TECHNICAL SPECIFICATIONS:
Led: 1x high performance, with a life cycle of 50,000 hours
Operating Modes: 3 light modes and 1 strobe, electronically adjusted
Powers and Durations: 2100 Lumens (0.30h) -> 300 Lumens (7.30h) -> 30 Lumens (70h) -> Strobe
Peak Power: 65200 candelas
Maximum lighting distance: 510m.
Lighting method: Rear button and StrobeReady button
Light selection method: Smart Selector Ring on the tang
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V 18W NL2150HPi - also compatible with 2x CR123 3.0/3.6/3.7V using an included adapter
Measurements: 16.3cm (L) - 2.54cm (D shaft) - 4.0cm (D head) - 3.1cm (D tang)
Weight:167g. without batteries
Accessories:NITECORE 21700i rechargeable lithium-ion battery (NL2150HPi 5,000mAh), CR123 battery adapter, holster, clip, lanyard, spare O-ring, USB-C charging cable
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 2m height

Actual powers and durations, lab-certified by ANSI/PLATO FL1-2019 standard

NITECORE EDC27 is a compact and ultra-slim flashlight with extraordinary light output. Its thin and rigid construction is made of high-strength stainless steel with a PVD titanium coating, with a carbon fiber reinforced polymer (CFRP) frame for excellent impact and torsion resistance.

It uses 2 Luminus SST40 LEDs for uniform light, with a maximum output of 3,000 lumens and a maximum range of 220 meters. The flashlight is equipped with a hybrid heat dissipation system for longer light duration and powered by a built-in 1,700mAh Li-ion battery.

It is rechargeable via USB-C and has a multifunctional OLED display showing brightness level, battery voltage and time remaining. It can be attached to the MOLLE system of a backpack or pocket with the included clip and has an IP54 rating for all-weather use.

The EDC27 features a hybrid heat dissipation system. Combined with the copper material and aluminum outer plate, as well as the Advanced Temperature Regulation (ATR) module, the EDC27 solves the heat dissipation problem of conventional EDC flashlights to provide longer lighting life.

Powered by the built-in 1,700mAh lithium-ion battery, the EDC27 can provide up to 37 hours of battery life. It is USB-C rechargeable and available with a reversible socket, while the charging socket cover is made to provide excellent resistance to moisture, dust and shock.

The multifunctional OLED display can show the brightness level, battery voltage, remaining battery life and more in real time. With a sturdy clip included, the EDC27 can be attached to the MOLLE system of a backpack or pocket.




TECHNICAL DATA:

LEDs: 2x Luminus SST40 with a life cycle of 50,000 hours
Brightness Levels: 5 light powers + STROBO
Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (1.45h. ) -> 200 Lumens (3.45h.) -> 65 Lumens (11h.) -> 15 Lumens (37h.)
Peak power: 12,200 candelas
Maximum lighting distance: 220m.
Lighting method: Dedicated on/off button
Light selection method: When on, lightly pressing the power button
Body: stainless steel with titanium PVD coating
Battery: Built-in 1,700mAh Li-Ion type, equipped with built-in USB-C type charging system
Measurements: 13.5cm (Length) -3.14cm (Width,) - 2.07cm (Thickness)
Weight: 124g.
Accessories: wrist strap, USB charging cable
Waterproofness: as per IP54 standard, resists dust and light splashes of water
Impact resistance: withstands falls from 1m height
Notes: equipped with built-in charging system via USB-C port (cable included, power adapter not included

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

High-performance 18650 battery (8A discharge) specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 3500mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 69.3±0.3mm / 2.73"±0.01"
* Diameter: ≤18.7mm / 0.74"

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Innovative and practical 18650 battery that can be recharged either traditionally or via built-in USB-C port and can also be used as a pocket power bank

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery and pocket power bank.
* Rated voltage: 3.6V / 9.36Wh
* Capacity: 2600mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* USB-C Input and Output: 5V/1A

DIMENSIONS
* Length: 71±0.3mm
* Diameter: 18.6mm±0.2mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of the batteries

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

High discharge power (15A) 21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C, rechargeable directly via built-in USB-C port or via conventional charger

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 74.6 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FEATURES
* Ultra-light dual-beam USB-C rechargeable headlamp weighs only 45g.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock-resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 45g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

The Nitecore P23i flashlight is the latest addition to the Precise series. Using a Luminus SFT-70 LED with a combined crystal-coated optical system and "Precision Digital Optics Technology" (PDOT), it has a maximum output of 3,000 lumens, ideal for law enforcement, assault operations, the self-defense, search and patrols.

Led: 1x Luminus SFT-70 LED with a life cycle of 50,000 hours
Operating modes: 4, electronically regulated + Strobe
Powers and Duration: 3000 Lumen (30min.) -> 1500 Lumen (2h 30min) -> 800 Lumen (4h) -> 250 Lumen (10h) -> 50 Lumen (45h) -> Strobe 3000 lumen
Peak power: 55300 candles
Maximum lighting distance: 470m.
Ignition method: Rear Button with "Momentary On" system for light signals and Rear "Mode" Button for immediate access to the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: Works only with a Nitecore "i series" 21700 rechargeable battery (NL2150i, 5,000 mAh - included in the package).
Measurements: 14.3cm (L) - 2.54cm (D stem) - 3.18cm (D head)
Weight: 113g. batteries excluded
Accessories: wrist strap, cordura sheath, spare o-ring, clip
Impermeability: as per IPX-8 standard, submersible up to 2mt. of depth for 30min.
Sheath: in tactical cordura
Impact resistance: withstands falls from a height of 2m

Italian guarantee Nitecore Italy: Torch guaranteed for 5 years - Battery guaranteed for 12 months

The LR40 is designed with retro style, which can be used as a camping lantern, ambient light, auxiliary light or decorative light.

The LR40 is available with 3 light sources to produce 360° omni-directional lighting with a maximum output of 100 lumens. In addition to the natural white light, it can also offer the warm light provided by the tungsten filament LED, while the SOS red light can be activated to alert rescuers in an emergency.

The knob switch can be used to turn on/off the light and adjust the brightness steplessly. Built-in 4,000mAh Li-ion battery, it can provide a maximum working time of 65 hours, a night companion for 8 nights. Available with USB-C input and USB-A output, it can be used as a power supply.

In addition, there are multiple ways to use the LR40: place it, hold it or hang it in the tent while the handle features a convex design for more stable hanging. Furthermore, the LR40 has a premium and reliable construction. The ABS plastic housing is durable and impact resistant.

Hot light
Min: 15 lumens - 45 hours
Max: 80 lumens - 15 hours

White light
Min: 15 lumens - 38 hours
Max: 50 lumens - 10 hours

Warm + white light
Min: 10 lumens - 65 hours
Max: 100 lumens - 8 hours

Red light (SOS flashing signal)
10 lumens

Dimensions
Height: 117mm / 4.61"
Width: 96mm / 3.78"
Weight: 222 grams / 7.83 oz
Construction Material: APS Plastic and metal
Switch: Rotating dial above the light
Features Rechargeable: yes
Special Modes: Red SOS
Maximum output: 100 lumens
Battery Included: Built-in Li-ion

Commuter Backpack
The Nitecore BP16 is the backpack for going anywhere and doing anything. Designed for the modern man on the move, the BP16 combines ample interior space with a lightweight and comfortable construction. This backpack can be carried over the shoulder or stored as a convenient carry-on when travelling. Made of durable 500D polyester, this backpack is perfect for any adventure, regardless of the weather. Multiple pockets will keep you organised, including a handy insulated compartment for a snack or drink. An excellent choice for school, commuting or outdoor trekking.

Features
" High-strength 500D polyester fabric
"16 litre large capacity main compartment
" Can hold laptops up to 14 inches long
" Spring strap system for modular extensions
"Multifunctional interior compartments
"Insulated compartment for food or snacks
" Breathable shoulder straps for superior comfort

Measurements

- Number of closable pockets: 5
- Height: 14Cm
- Length: 46Cm
- Weight: 815g
- Width: 29Cm

Innovative and practical 21700 battery that can be recharged either traditionally or via built-in USB-C port and can also be used as a pocket power bank

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery and pocket power bank.
* Rated voltage: 3.6V / 12.6Wh
* Capacity: 5000mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* USB-C Input of 5V/2.5A and Output of 5V/2A
* Discharge capacity: 8A

DIMENSIONS
* Length: 78.8±0.2mm
* Diameter: 21.7mm±0.3mm
* Weight: 74.5g.

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

* Ultra-lightweight organizer with waterproof lining made of 500D tear-resistant polyester fabric.
* Hidden zippered pocket in main compartment with ample storage space
* Zippered front compartment for quick and convenient access
* Back pocket for smartphones, keys, etc.
* Adjustable shoulder strap
* Easy-to-use zipper tab with extended Nitecore tab

Color: Black
Material: 500D water-resistant polyester fabric
Length: 35cm
Height: 13.5cm
Thickness: 7cm
Weight: 166g.

Key Features.
* Quad-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX / 1,000mA*3 MAX / 750mA*4 MAX
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX / 700mA*3 MAX / 500mA*4 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 105mm x 37mm (5.83" x 4.13" x 1.46")
Weight: 191.4g (6.75 oz) (Charging cable not included)

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

KEY FEATURES:
* Uses a Luminus SFT-40-W LED with a maximum power output of 1,800 lumens.
* Maximum light intensity of 41,000cd and maximum range of 405 meters.
* Glass and dishes with anti-reflective, crystal coating and with PDOT (Precision Digital Optics Technology) treatments.
* Powered by a high-capacity Li-ion 21700 battery and compatible with both 18650 and CR123 batteries to allow constant light for up to 1,500 hours.
* Tactical Mode and Daily Mode functions.
* Rear power button and side metal selection button control 5 different brightness levels and 3 special modes.
* STROBO mode constantly changes frequency randomly to maximize disorientation effects.
* Built-in illuminated potentiometer, located below the Mode button, which indicates the remaining battery charge.
* Built-in potentiometer can indicate the remaining voltage of the inserted battery, with minimal deviation (±0.1V)
* Built-in charging circuits via USB-C port.
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included.
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR temperature regulation technology (Patent No. ZL201510534543.6)
* Electronic protection against battery polarity reversal.
* Optical lenses with scratch-resistant coverage on both sides
* Constructed of solid aircraft aluminum alloy.
* Rugged HAIII type anodization with military specifications.
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Impact and drop resistant up to a maximum of 1m. height


TECHNICAL SPECIFICATIONS:
Led: 1x Luminus SFT-40-W with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 1800 Lumens (0.45h) -> 1050 Lumens (3.15h) -> 260 Lumens (8.45h) -> 45 Lumens (47h) -> 1 Lumens (1500h) -> Strobe -> Beacon -> S.O.S.
Peak power: 41000 candles
Maximum lighting distance: 405m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2150 - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 2.54cm (D head) - 2.72cm (D tang)
Weight: 80g. without batteries
Accessories: NITECORE 21700 Li-ion Rechargeable Battery (NL2150 5,000mAh), USB-C charging cable, Clip, Wrist Corrector, Replacement O-rings, 18650/CR123 battery adapter, NTH10 tactical scabbard
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height


Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

The UT05 ultra-light lighting system uses a high CRI COB light source (CRI≥90, color temperature: 4000K) with large luminous bodies that produce a maximum output of 400 lumens with a maximum range of 27 meters.

Due to its wide beam (160°) diffusion capability, it has efficient light transmission over rough terrain.

The UT05 features a convenient USB-A socket, compatible with universal USB power sources. One Button Interface is easy to use to adjust the brightness level.

The UT05 is ideal for various outdoor activities, such as trail running, training running, trekking and hiking. With Advanced Power Cut-Off (APC) technology, it can provide extremely low standby power consumption for 365 days. Guaranteed by the highly efficient constant current circuit, the constant brightness beam without flashing gives you a comfortable viewing experience. It is applicable for all weather conditions such as IP66 rated and 1m shock resistant.

In order to work, the UT05 model must be connected via the USB-A socket to a power source (power bank), the Nitecore NB10000 -NC10000 NB20000, NPB1 products are perfect.

SPECIFIC TECHNIQUES:
COB: High CRI COB light source
Operating modes: 2 bright modes
Powers and Duration: 400 Lumen (5.30h) 27 meters -> 200 Lumen (13h) 20 meters
Peak power: 185 candles
Maximum lighting distance: 27m.
Ignition Method: Advanced Power Cut-Off (APC)
Weight: 44g.
Waterproof: as per IP66 standard
Impact resistance: withstands drops from 1m in height

COMPATIBILITY:
Only with the following NITECORE flashlight models: P10i, P10iX, P20i, P20i UV, P20iX, P30i, P35i


DESCRIPTION:
2.4G radio-frequency wireless remote switch to remotely control in ignition and light selection your NITECORE flashlight belonging to the "i" series to be used by replacing the back cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is to be mounted in place of the original flashlight cap and a wireless remote control to be placed via hook-and-loop (provided) or Velcro (provided) to your firearm or wherever you find most convenient within a range of about 1m. so that you can turn on and control your flashlight without the hassle of a cable.

It allows both temporary lighting of the light (light is emitted by pressing and holding the pad, goes out by releasing it) and strobe function via dedicated button; it also allows fixed lighting of the light with subsequent possibility of varying its luninous power.


PACKAGE CONTENTS:
* Wireless back cap
* Wireless remote switch already paired and with batteries already inserted
* Velcro-type strap closure
* Velcro-type hook-and-loop strap
* 2 Picatinny rail mounts

FEATURES
* High-performance USB-C rechargeable headlamp.
* Maximum power output of 1,400 lumens
* Red light illumination designed to protect night vision.
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Built-in 3,400 mAh rechargeable Li-ion battery.
* Integrated charging circuit via USB-C port (5V⎓2A) of the built-in Li-ion battery.
* Designed with two different buttons in shape and touch for easy one-handed operation
* 5 brightness levels, 2 light sources and 3 special modes available
* Designed with 4 power indicators, to indicate the remaining battery charge
* Made of durable plastic material, with aluminum alloy front housing
* Proximity sensor that automatically dims the light if it detects nearby objects
* Shock-resistant up to falls from heights of 2m
* Waterproof and dustproof in accordance with IP68 standard



WEIGHTS AND DIMENSIONS
Dimensions: 79.8mm x 46.1mm x 43.9mm (Front Mount Included)
Weight: 116g (Front Stand and Elastic Band Included) / 94g (Front Stand Included)

ACCESSORIES INCLUDED
USB-C charging cable, Front Elastic Band

TECHNICAL SPECIFICATIONS.
LEDs: 2x primary white, 1x auxiliary red, all with a life cycle of 50,000 hours and an illumination radius of more than 100°
Operating Modes: 5 light powers on primary light + 2 special modes; 2 on red light
Powers and Durations Primary White: 1400 Lumens ( / ) -> 600 Lumens (10h.) -> 300 Lumens (15h.) -> 100 Lumens (29h.) -> 8 Lumens (165h.) -> SOS -> Beacon
Peak power: 3800 candelas
Maximum lighting distance: 130m.
Power and luminsa selection method: Two dedicated power, and light selection buttons
Body: made of plastic material
Battery: built-in, non-removable 3.6V and 3400mAh Li-Ion battery
Water resistance: as per IP68 standard
Impact resistance: withstands falls from 2m height
Notes: Equipped with built-in charging system via USB-C port - Separate remaining charge indicator - Proximity sensor that automatically switches light output if it detects nearby objects

Nylon tactical belt sheath, with magnetic closure, designed to prevent accidental activation while carrying.

Compatibility:
* NITECORE P20i
* NITECORE P20i UV
* NITECORE P20iX

Dimensions:
155mm x 59mm x 50mm.

Material:
Nylon with quick-release rear belt loop and rigid polymer hook

Key Features:
* Powerbank equipped with LED lights with a capacity of 10000 mAh.
* Designed to be used at high altitudes and low temperatures.
* USB-C input/output channel.
* Output of 20W
* Compatibility with PD charging and QC 3.0.
* LED residual power level indicator.
* IPX5 waterproofing.
* Equipped with dual LED emergency flashlight that produces 50 Lumens for up to 30h. continuously


Technical Specifications:
* Capacity: 10000mAh / 3.6V / 36Wh
* Length: 8.9cm
* Width: 4.52cm
* Thickness: 2.26cm
* Weight: 168.5g
* USB-C input:5V⎓2.4A / 9V⎓2A
* USB-C Output:5V⎓3A / 9V⎓2.22A / 12V⎓1.68A

KEY FEATURES:

- Dual-beam, ultra-long distance LEP (laser) laser flashlight.
- Features spotlight and projector with dual lens system to provide a maximum output of 3,000 lumens
- The spotlight uses a class 1 LEP laser light with a maximum output of 410 lumens
- The spotlight uses 6 CREE XP-G3 LEDs with a maximum output of 3,000 lumens.
- Maximum peak beam intensity of 678,000cd and maximum range of 1,650 meters
- Powered by a 21700 i Series battery, but compatible with CR123 batteries, for up to 60 hours of continuous battery life
- Real-time multifunctional OLED display for brightness, range, battery voltage, autonomy, etc.
- Intelligent lithium-ion battery charging circuit, with USB-C charging port
- Highly efficient constant current circuit
- Built-in advanced temperature regulation (ATR) module (Patent No. ZL201510534543.6)
- NITECORE 21700i lithium-ion battery (NL2150HPi 5,000mAh) and RSW2i remote switch (part of cable) included
- Optical lenses with scratch-resistant coating on both sides
- Constructed of aircraft aluminum alloy
- Hardened, anodized, military-grade HA III finish
- Classified to meet IP68 waterproofing standards (2-meter submersion)
- Shock resistance to drops of up to 1 meter

 Laboratory-certified power and lifetime by ANSI/NEMA FL1 standards using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary





LEDs: 6 x CREE XP-G3 LEDs + 1x Class 1 LEP laser, with life cycles of more than 50,000 hours
Operating Modes: 3 operating modes (Flood, Spot and Mix) for a total of 13 different electronically regulated light intensities
Powers and Durations FLOOD: 3000 Lumens (45min.) -> 1000 Lumens (2h.) -> 300 Lumens (6h.) -> 70 Lumens (28h.) -> 10 Lumens (60h.)Powers and Durations SPOT: 410 Lumens (2h. and 15min. ) -> 200 Lumens (3h.) -> 130 Lumens (4h. and 30min.) -> 65 Lumens (8h.) -> 25 Lumens (12h.) MIX Powers and Durations: 3000 lumens (45min.) -> 420 Lumens (2h. and 45min.) -> 130 Lumens (6h.)
Peak power: 678000 candles
Maximum lighting distance: 1650m.
Lighting Method: Rear Button with "Momentary On" system for light signals or by remote control
Light selection method: With the flashlight on, pressing the front "Mode" button or via remote control 
Head: aircraft aluminum 
Body: aircraft aluminum
Finish: anodized, Type III
Lens: optical, with scratch-resistant coating
Batteries: works with a rechargeable 21700 rechargeable "i-generation" battery (NL2150HPi, 5,000mAh) included in the package. If needed, it can also work with 2x CR123 3.0V but without being able to use the Turbo and High powers
Measurements: 18.6cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 296.6g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, RSW2i remote control, USB charging cable, CR123 battery reducer
Water resistance: as per IPX-8 standard, submersible to 2m depth for 30min.
Sheath: cordura, belt-mounted, with magnetic closure
Impact resistance: withstands falls from 1m height




Nitecore Italy warranty: flashlight guaranteed 2 years - Battery guaranteed 12 months

KEY FEATURES:

- Uses a Luminengin G9 LED with a maximum output of 1,500 lumens.
- Maximum peak intensity in the beam of 570,000cd and maximum range of 1,500 meters
- PDOT (Precision Digital Optics Technology) optical system combined with crystal coating.
- Powered by 2 high-capacity Li-ion 21700 batteries providing up to 105 hours of battery life
- Equipped with low battery charge indication via vibration
- Tactical switch on tang and Mode button control 4 brightness levels and 3 special modes
- STROBE mode uses randomly changing frequencies for more effective disorienting effects.
- A power indicator located below the Mode button indicates the remaining battery charge
- Intelligent Li-ion battery charging circuit, with USB-C charging port
- NITECORE 21700 Li-ion batteries included (NL2150 5,000mAh)
- Highly efficient constant current circuit provides stable light output
- Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
- Optical lenses with scratch-resistant coating on both sides
- Constructed of aircraft aluminum alloy
- HA III hardened anodized finish, military grade
- Waterproof and dustproof rating to IP68 standard (submersible to 2m)
- Shock resistant up to 1m in height

 Lab-certified powers and durations by ANSI/NEMA FL1 standards using 2x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary





Led: 1x Luminengin G9 with a life cycle of 50,000 hours
Operating Modes: 4, electronically regulated + Beacon, Turbo and Strobe
Powers and Durations: 1500 Lumens (3.15h) -> 500 Lumens (7h 15min) -> 150 Lumens (25h) -> 18 Lumens (105h) -> Strobe -> Beacon -> SOS
Peak power: 570000 candles
Maximum lighting distance: 1500m.
Lighting Method: Rear Button with "Momentary On" system for light signals or by wireless remote control
Light selection method: With the flashlight on, pressing the front "Mode" button or via wireless remote control
Head: aircraft aluminum 
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: works with 2 rechargeable 21700 rechargeable batteries (NL2150, 5,000mAh) included in the package.
Measurements: 25.6cm (L) - 2.58cm (D shaft) - 6.5cm (D head)
Weight: 245.8g. excluding batteries
Accessories included: 2x NITECORE 21700 Rechargeable Li-ion Batteries (NL2150 5,000mAh), Spare O-rings for watertightness, Wrist Strap, 18W QC 3.0 Travel Power Supply, USB-C Charging Cable, Sheath, RSW2i WL Wireless Remote Control Set (Remote Control, Hooks and Ties, 2x Velcro Attachments, 2x Picatinny Mounts)
Waterproof: as per IPX-8 standard, submersible to 2m depth for 30min.
Sheath: cordura, belt-mounted, with Velcro closure
Impact resistance: withstands falls from 1m height

Nitecore Italy warranty: flashlight guaranteed 5 years - Batteries guaranteed 12 months

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:

Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Titanium alloy
Battery: Built-in 280mAh Li-Ion type, with built-in USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 21.5g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:
Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Stainless steel with PVD surface treatment
Battery: Built-in 280mAh Li-Ion type, with integrated USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 26g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

* Uses 19 x CREE XP-L HD LEDs with a maximum output of 20,000 lumens
* Maximum beam intensity of 22,200cd and maximum range of 290 meters.
* Rigid, lightweight body designed for rapid cooling built with CNC unibody die-cast technology
* 2 x built-in rechargeable Li-ion batteries type 21700 (9.600mAh)
* Intelligent Li-ion battery charging circuit with USB-C charging port
* Ambidextrous operation buttons specially designed for tactical activities
* Interchangeable STROBE READY™ (Patent No. ZL201320545349.4) and TurboReady settings
* STROBE mode uses randomly changing frequencies for more effective effects.
* Highly efficient constant current circuitry provides stable output for up to 13 hours.
* Built-in advanced temperature control (Patent No. ZL201510534543.6)
* Optical lenses with anti-scratch coating on both sides
* Constructed of aircraft grade aluminum alloy
* Hard anodized finish, military grade HA III
* Waterproof and dustproof in accordance with IP68 specifications (submersible to 2 meters)
* Shock resistant up to 1 meter height
* Ability to be used as a candle, resting on the tang

TECHNICAL FEATURES

Led: 19x Cree XHL-HD with a life cycle of 50,000 hours
Operating Modes: 8 electronically controlled light powers
Powers and Durations: 20000 Lumens (n.a.) -> 3100 Lumens (45min.) -> 1900 Lumens (1h45min.) -> 1050 Lumens (4h15min.) -> 320 Lumens (13h.) - > Spotlight 1200 Lumens ( 3h30min.) -> Floodlight 1800 Lumens (2h.) -> Strobe 20000 Lumens (n.a.)
Peak power: 22200 candles
Maximum lighting distance: 290m.
Ignition Method: Dedicated button for Ignition and separate, dedicated button for Quick Strobe
Light selection method: Dedicated button for light selection
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Battery: rechargeable, integrated, non-removable - 2x Li-ion 21700 9600mAh
Measurements: 14.5cm (L) - 5x2.6cm (width and thickness of the barrel) - 5cm (head diameter)
Weight: 422g.
Accessories: USB-C charging cable, Cycletrack with magnetic closure, Wrist strap, Clip (removable, already mounted on the flashlight)
Water resistance: as per IP68 standard, submersible to 2m depth for 30min.
Impact Resistance: internal electronic components resist to falls up to 1m height
Notes: The flashlight has a built-in charging system via USB Type C cable

FEATURES
* Triple output USB-C rechargeable headlamp.
* Primary white LED with a maximum output of 700 lumens.
* Equipped with a high CRI (CRI≥90) auxiliary white light.
* Red light illumination designed not to annoy during night vision
* Uses a unibody optical lens system with various facets to reflect a light evenly
* Built-in rechargeable 2,000 mAh lithium-ion battery.
* Built-in intelligent battery charging circuit via USB-C charging port (5V⎓2A).
* Designed with two buttons of different shape and touch feeling for easy one-handed operation
* 5 brightness levels, 2 special modes and 2 red light modes selectable
* Designed with 4 power indicators, to quickly indicate the remaining battery charge
* Made of durable PC and aluminum materials
* Compact and lightweight
* Shock resistant up to falls from a height of 1 meter
* Waterproof and dustproof rating in accordance with IP66 standards

WEIGHTS AND DIMENSIONS
Dimensions: 62.3mm x 46mm x 35.6mm (Front Stand Included)
Weight: 95.5g (Front Mount and Elastic Band Included) / 76g (Front Mount Included)

ACCESSORIES INCLUDED
USB-C charging cable, Front Elastic Band

TECHNICAL SPECIFICATIONS.
LEDs: 1x primary white, 1x auxiliary red, 1x auxiliary white all with a life cycle of 50,000 hours and an illumination radius of more than 100°
Operating Modes: 3 light powers on primary light + 2 special modes; 2 on red light; 2 on white auxiliary light
Powers and Durations Primary White: 700 Lumens (4h. ) -> 200 Lumens (9h.) -> 60 Lumens (38h.) -> 50 Lumens (47h.) -> SOS -> Beacon
Peak power: 4578 candelas
Maximum illumination distance: 135m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: aluminum, with plastic parts
Battery: built-in, non-removable, 3.7V, 2000mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

KEY FEATURES
* Wide light, depth light and auxiliary red light with a maximum output of 2,000 lumens
* Uses 2x Luminus SST-40-W LEDs for both primary white lights
* The reflector uses a specially designed TIR optical lens for long-range illumination to provide a maximum range of 202 meters and a maximum beam intensity of 10,300cd
* The projector uses TrueVision technology for an ultra uniform beam pattern.
* Continuous light variation for both spotlight and projector (Patent No.: ZL201820778007.X)
* Highly efficient constant current circuit provides light output for up to 800 continuous hours.
* Intelligent lithium-ion battery charging circuit equipped with a USB-C charging port
* 180° tilt angle for different lighting needs
* A charge indicator under the "+" and "-" buttons indicates the remaining battery charge.
* Charge indicator can display battery voltage (±0.1V)
* Built-in ATR (Advanced Temperature Regulation) module (Patent No. ZL201510534543.6)
* Constructed of aircraft grade aluminum alloy
* Military grade HA III ultra durable anodized finish
* Waterproof as per IP68 standard (submersible up to 2 meters)
* Shock resistant up to 2 meters high

TECHNICAL FEATURES
LED: 2x Luminus SST-40-W with 50,000 hour life cycle
Output: 13x digitally controlled light output and 3 signaling modes
Powers and duration spot light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 950 lumens (2.30h.) -> 1800 lumens (30*min. - without taking into account automatic temperature control) -> 2000 lumens (Turbo)
Flood light powers and duration: 1 lumen (800h.) -> 45 lumens (28h.) -> 220 lumens (6h.) -> 850 lumens (2.30h.) -> 1400 lumens (30*min. - without taking into account automatic temperature control) -> Beacon -> S.O.S.
Powers and durations auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (160h.)
Range: up to 202mt.
Peak power: 10300 candles
Usable batteries: 1x 18650HP 3.6V (included in the package) or 2x CR123A 3.0/3.7V disposable or rechargeable
Flashlight dimensions: 91.5x34.75x26.5 mm. 
Weight: 70g (without battery)
Lens: TIR type, in shockproof plastic material
Body: aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Included Accessories: 1x Battery 18650 NL1835HP 3.6V and 3500mAh - USB charging cable - elastic front strap - front bracket
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable provided as standard you can provide for charging the battery supplied, the operation is monitored by a special LED light located next to the buttons of selection light. The charging cable can be attached to any PC equipped with USB port or to any wall or cigarette lighter power supply equipped with USB port.
Notes: waterproof and submersible as per IP68 standard - 1750 lumens of power are achievable only by using a battery with a discharge power equal to or greater than 8A (insluded); using different batteries, the maximum power will be limited to 900 lumens.

ANSI/PLATO FL1-2019 standard certified power and duration tested with 1x 18650 HP 3500mAh

Mini organizer made of water-repellent 500D Polyester consisting of a single zippered main compartment (for storing power bank, credit cards, headphones and cables). On the front side it offers 6 M.O.L.L.E. compatible modular webbing/attachments and on the back side it has an aluminum carabiner and a quick release webbing that allows to wear it on the belt or to tie it to other M.O.L.L.E. type webbing.

Material: 500D Water-repellent Polyester
Dimensions: 12.5cm x 7.5cm x 3cm
Carabiner: rear, aluminium
Loop: rear, belt loop, quick release, M.O.L.L.E. compatible

Mini organizer made of 500D water-repellent Polyester consisting of a zippered main compartment (to store cell phones, power bank, headphones, keys and any other bulky gadget) with a small internal net to hold small products; two external side mesh compartments for quick access (for flashlights, cutters, folding knives, multipurpose tools).

Material: 500D water repellent polyester
Dimensions: 16cm x 9.5cm x 8cm
Carabiner: rear, aluminum

Mini organizer made of 500D water-repellent Polyester consisting of a zippered main compartment (for storing keys, credit cards, money, coins and other small items) and a rear open pocket compartment (for headphones, cables, flashlights and more)

Material: 500D Water-repellent Polyester
Dimensions: 12.5cm x 9.5cm x 1cm
Neck lanyard: adjustable, 60cm long

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

The LMA1 is an ARC Ops-Core compatible military helmet mount, specially designed for law enforcement, fire, search and rescue.

It can hold a torch with a standard 1 "(25.4mm) tube diameter and rotates 360 ° with quick and easy adjustment in 8 directions.

Constructed from aerodynamic grade aluminum alloy with HA III military grade hard anodized finish, it is lightweight, durable and with excellent impact resistance. Perfect for law enforcement, firefighters and search and rescue.

Specifications:
Tube diameter: 1 inch (2.54cm), which means it fits all 1 "body torches.
Length: 4.50 cm
Width: 4.40 cm
Height: 4.29
Weight: 1.59 oz

Material: aero grade aluminum alloy
Finish: HAIII military grade anodized

The NITECORE MH25 V2 Next Generation 21700 Dual Fuel Long Range Flashlight is now available as the latest upgraded NITECORE classic model of the Multitask Hybrid series. The MH25 V2 uses a high performance LED to emit a maximum output of 1300 lumens and is equipped with a combined optical system with crystal coating and "Precision Digital Optics Technology" (PDOT) to provide a maximum range of 475 meters and a maximum intensity peak radius of 57,000 cd.

The metal side switch of the MH25 V2 provides better feedback for the user even with gloves and controls 4 brightness levels and 3 special modes. The tactical tail switch is always ready to enter tactical or HIGH level mode. The STROBE mode is made up of frequencies that change randomly to allow for strong dizzying effects.

An intelligent lithium-ion battery charging circuit with a USB charging port is integrated in the MH25 V2 - The charging time is approx. 3 hours 45 minutes, which allows you to recharge the flashlight more conveniently to avoid power outages. In addition, the charging port cap can provide excellent water, dust and shock resistance.

The 5,000 mAh lithium-ion battery gives the MH25 V2 a maximum range of 1,500 hours on ULTRALOW while it is compatible with 1 18650 battery or 2 CR123 / RCR123 batteries.

KEY FEATURES:

* Uses a Luminus SST-40-W LED with a maximum output power of 1,300 lumens
* Maximum light intensity of 57.000cd and maximum range of 475 meters
* Glasses and parables with anti-reflective, crystal coating and PDOT (Precision Digital Optics Technology) treatments
*Powered by one 21700 battery, alternatively can use one 18650 or two CR123 to allow constant light for up to 1,500 hours.
* Tactical Mode and Daily Mode functions
* The rear power button and the metal side selection button control 4 different brightness levels and 3 special modes
* STROBE mode constantly changes frequency randomly, to maximize disorientation effects.
* Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the inserted battery, with a minimum voltage deviation (± 0.1V)
* Charging ICs via USB-C port
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR technology (Advanced Temperature Regulation) for temperature regulation (Patent N ° ZL201510534543.6)
* Electronic protection against battery polarity inversion
* Optical lenses with anti-scratch cover on both sides
* Constructed from solid aircraft-grade aluminum alloy
* Rugged HAIII type military specification anodizing
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL SPECIFICATIONS:
Led: 1x High performance LED with a life cycle of 50,000 hours
Operating Modes: 4 light modes and 3 special modes, all electronically adjusted
Powers and Durations: 1300 Lumens (3h) -> 300 Lumens (8,5h) -> 50 Lumens (50h) -> 1 Lumens (1500h) -> Strobo -> Beacon -> S.O.S.
Peak power: 57000 candles
Maximum illumination distance: 475m.
Ignition method: Rear button with "Momentary On" system for light signals
Light selection method: Front button placed under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: (included):1x21700 5000 mAh (included): can also use 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V (not included)
Measurements: 15.7cm (L) - 2.54cm (D stem) - 4.0cm (D head) - 2.72cm (D tang)
Weight: 137g. without batteries
Accessories: wrist strap, ABS belt sheath, spare o-ring, clip, adapter for 18650 batteries, USB charging cable,
Water resistance: as per IP68 standard, submersible up to 2m. depth for 30min.
Impact resistance: withstands drops from 1m in height

Equipped with 4 CREE XP-G3 LEDs with a lifespan of 50,000 hours, the NPL30 has an output of 1200 lumens, a peak intensity of 3,300 cd and a shooting depth of 113 meters. It is powered by 2 CR123A batteries (included) with a maximum autonomy of 1 hour and 45 minutes. Both switches can perform the same functions to provide ambidextrous light activation. Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and triple press one of the power buttons for STROBE mode, which uses randomly changing frequencies for stronger dizzying effects.

There is the standard Picatinny rail mount for quick mounting and compatible with firearms with universal Picatinny rails. Electronic reverse polarity protection ensures safe and stable use. Built-in ATR technology adjusts the NPL30's output based on working conditions and environment to maintain optimum performance. It has an ultralight weight of 130g (4.59oz) (including battery), IP66 waterproof and 1m impact resistant.

Led: 4x Cree XP-G3 - with a life cycle of 50,000 hours
Operating Modes: Press and hold one of the power buttons to access momentary tactical ignition, short press one of the power buttons to access constant power and press one of the power buttons three times for the STROBE mode, which uses frequencies that change randomly for stronger dizzying effects.
Powers and Durations: 1200 lumens (1.45h) Strobo 1200 lumes
Power peak: 3300 cd
Maximum illumination distance: 113m.
Ignition method: double switch, ambidextrous, placed on the sides of the flashlight
Light variation method: double switch, ambidextrous, placed on the sides of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: works with two CR123A batteries (included in the package)
Measurements: 8.1cm (Length) - 3.8cm (Width) - 3.5cm (thickness, sled included)
Weight: 130g. with battery inserted
Accessories: o-rings
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m. in height
Notes: Universal quick coupling slide, compatible with Picatinny and Weaver systems

Key Features:
* Ultra-light powerbank with a capacity of 20000 mAh
* IP68 waterproof, submersible up to 2m depth and resistant to shocks and drops up to 1m. in height
* Double USB output channel with additional safety mechanism for Nitecre headlamps
* LED residual power level indicator
* Works even at temperatures below -10 ° C / 14 ° F
* Weighs only 378 grams and is very compact, to be taken anywhere

Technical specifications:
* Capacity: 20000mAh 3.64V (72.8Wh)
* Length: 10.54cm
* Width and Thickness: 5x4,9cm
* Weight: 378g
* Input: Micro-USB: 5V = 2.4A 9V = 2A
USB-C: 5V = 3A 9V = 2A 12V = 1.5A
* Output: USB-A: 5V = 3A 9V = 2A 12V = 1.5A
USB-C: 5V = 3A 9V = 2A 12V = 1.5A
Multiport: 5V = 3A

Supported Protocols:
* QC2.0 / QC3.0 output
* FCP / AFC / SFCP input and output
* MTK PE + 1.1 & 2.0 output
* BC1.2, Apple, Samsung Fast charging

Perfect companion for extreme adventures!
Small, compact, light and robust, it is designed to follow you on all your adventures. Thanks to the IP68 certification it resists any environment, from the dusty to the most humid, even managing to go underwater up to 2 meters deep! Take it with you even on your adventures at high altitude, in fact it resists extreme temperatures, down to -10 ° C!

Designed for Nitecore headlamps!
Thanks to the integrated metal hook compatible with the newly developed Nitecore headlamps - such as the HU60 - it allows a quick, safe and constant coupling between the torch and the battery pack so as to never run out of light when needed, even the pack batteries more excited!

Sheath: A high strength spring compatible nylon holster is included which allows you to easily carry the NPB4 on your backpack, belt or kit.

USB-A and USB-C output ports 3
NPB4 can quickly charge 3 devices simultaneously on the go with QC 3.0 support and 18W maximum power. It comes with two USB-A output ports for USB devices and one USB-C port for both output and charging. It also has a micro USB port as a secondary charging port for use with USB cables.

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

The Nitecore BP18 is a computer backpack with a robust and practical design perfect for travel or for those who travel frequently. Made from 500D nylon fabric, this backpack is dirt and water resistant, making it perfect for city or rural travel.

The main compartment of the package has a volume of 18 liters and can hold laptops up to 13 inches in length. The BP18 obviously has many other compartments including one for hydration backpacks and a series of internal compartments on the sides for tools or valuables.

This pack also features a tactical-style MOLLE texture that allows users to customize their carrying experience with compatible gear and backpacks.

Notable features
»500D nylon fabric resistant to wear with dirt and water resistant
"18 liter large capacity main compartment
»Can hold laptops up to 13" in length
»Molle belt system for modular extensions

Dimensions
16cm (L) x 24cm (W) x 47cm (H)

Weight
Approx. 710g / 1.6lbs

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

Key Features

Triple output USB-C rechargeable headlamp, made of solid metal
It uses a Luminus SST-40-W primary LED with a maximum output of 1,750 lumens
Equipped with two auxiliary lights: one white with high CRI (CRI≥90, Color temperature: 4500K) and one red
Unibody lens of TIR type to emit a uniform and soft light
Maximum light intensity of 7,000cd and maximum range of 165 meters
The highly efficient constant current circuit provides stable light output for up to 800 hours
Built-in Li-ion battery charging circuit, via USB-C port
180 ° adjustable tilt angle for various lighting needs
The indicator under the switch indicates the remaining battery charge (Patent ZL201220057767.4)
The indicator also indicates the battery voltage (± 0.1V)
Built-in advanced temperature regulation module (ATR) (Patent ZL201510534543.6)
Constructed from aircraft grade aluminum alloy
Tough anodized finish, military grade HA III
Classified as waterproof and dustproof as per IP68 standard (submersible up to 2m)
Shock resistant up to 2 meters high

LED: 1x Luminus SST-40-W with a lifespan of 50,000 hours
Output: 8x constant light output, digitally regulated and 3 signaling modes
Power and duration of main white light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 900 lumens (2.15h.) -> 1750 lumens (30 * min. - without holding account of automatic temperature adjustment) -> Beacon -> SOS
Powers and durations of the auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (57h.)
Powers and duration of auxiliary white light: 24 lumens (42h.)
Range: up to 165mt.
Peak of power: 7000 candles
Usable batteries: 1x 3.6V 18650HP (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 90.8x34.7x26.9 mm.
Weight: 65.5g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Accessories included: 1x 3.6V and 3500mAh 18650 NL1835HP battery - USB charging cable - front elastic strap - front bracket - spare rubber button - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.
Notes: waterproof and submersible as per IP68 standard - the 1750 lumens of power can only be obtained using a battery with discharge power equal to or greater than 8A (included); using different batteries, the maximum output will be limited to 900 lumens.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 HP 3500mAh

KEY FEATURES

* It uses two main LEDs 1XCREE XP-G3 S3 (3000K) Spotlight (from depth) and 1xCREE XP-G3 S3 (5700K) Floodlight (ambient), usable individually or combined and two small central auxiliary red light LEDs.

Maximum output power 520 lumens with depth about 103 meters
* Polymer torch body
* The torch consists of a double parabola (front) which guarantees a double possibility of illumination;

Parabola CREE XP-G3 S3 (3000K) Spotlight with 3 levels: 520 lumnes - 400 lumens (6 hours) - 100 lumens (10 hours)
CREE XP-G3 S3 dish (5700K) Floodlight with 2 levels: 200 lumens (8 hours) - 55 lumens (13 hours)

Central red LEDs: 16 lumens (6 hours)

* Maximum light intensity of 4120 cd and maximum range of 128 meters
* Powered by both USB-C Nitecore HLB1300 Rechargeable Li-ion Battery (included), and 3 AAA batteries
* Double button on, off and adjustment
* Wide 90 ° lighting angle, specially designed for hiking and sporting activities
* Elastic front band included, light and breathable
* Electronic protection against battery polarity inversion
* Made of ABS
* Submersible as per IP66 specifications
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

Battery (included): Nitecore HLB1300 Rechargeable Li-ion Battery USB-C rechargeable battery
Torch dimensions: 54.9x398.6x28.3mm.
Weight: 82.5g (flashlight only, without batteries, headband and holder for front use)
Lens: micro-blasted hardened glass
Body: ABS
Notes: water resistant as per IP66 standard.
NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

WHY CHOOSE IT:

Tactical / military use - High luminous power - Very compact dimensions - Convenience of the integrated recharging system - Wide range light - Practicality and immediacy of the light selection commands. Thanks to Strobo Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head
* NITECORE 21700 rechargeable battery (NL2150i, 5,000mAh) included in the package
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide range light with 6580cd central brightness. and maximum range of 158 meters
* Glasses and parables with anti-reflective, crystal coating and PDOT (Precision Digital Optics Technology) treatments
* Tungsten carbide front glass breaker
* Integrated potentiometer with light indicating the remaining charge and residual voltage of the battery
* Constructed from solid aircraft grade aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - in different conditions of use or using different batteries, the data may vary

Led: 4 CREE XP-L2 V6 LEDs with a life cycle of 50,000 hours
Operating Modes: 6, electronically regulated + Strobo
Powers and Durations: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 6580 candles
Maximum illumination distance: 158m.
Ignition method: Rear button with "Momentary On" system for light signals and Rear "Mode" button to immediately access the strobe function, which remains active as long as the button is pressed
Light selection method: With the flashlight on, pressing the rear "Mode" button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: only works with a 21700 Nitecore "i series" rechargeable battery (NL2150i, 5,000mAh - included in the package). If necessary, it can also work with 2x 3.0V CR123, stopping at 1060 lumens of power
Measurements: 13.7cm (L) - 2.54cm (D stem) - 2.54cm (D head)
Weight: 79.5g. batteries excluded
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip
Water resistance: as per IPX-8 standard, submersible up to 2m. depth for 30min.
Sheath: thermoplastic, rigid, for belt
Impact resistance: withstands drops from 1.5m in height

Italian warranty Nitecore Italia: 5 year guaranteed torch - 12 month guaranteed battery

KEY FEATURES

* Uses 9 CREE XP-L HD V6 LEDs with a maximum output power of 9,800 lumens
* Maximum light intensity of 19,800cd and maximum range of 280 meters
* Glasses and parabolas with anti-reflection treatments, crystal coating and with PDOT (Precision Digital Optics Technology)
* CNC machined one-piece body, rigid and lightweight, to allow optimal heat dissipation.
* Built-in, non-removable, 5,000mAh 21700-type Li-ion rechargeable battery.
* Integrated Li-ion battery charging circuits via USB-C port
* High-efficiency circuits to allow constant light up to a maximum of 60 continuous hours.
* Controlled by two separate buttons, for intuitive controls suitable for applications.
* TURBO READY technology (9,800 lumens).
* Integrated potentiometer, with indicator light to show the remaining battery charge
* Integrated potentiometer indicates the remaining voltage with a minimum voltage deviation (±0.1V)
* Optical lenses with anti-scratch coverage on both sides
* Made of solid aircraft aluminum alloy
* Rugged HAIII type anodization with military specifications
* Submersible as per IP68 specifications (up to 2m depth)
* Resistant to impacts and falls up to a maximum of 1m. height

TECHNICAL DATA

LED: 9x CREE XP-L2 HD - with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + STROBO mode
Powers and Duration: 9800 lumens (turbo) -> 2000 lumens (3h) -> 500 Lumens (4h) -> 130 Lumens (14h) -> 30 Lumens (60h) -> Strobe 9800 lumens
Peak power: 19800 candles
Maximum Lighting Distance: 280m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to TURBO function, which remains active as long as the button is held down
Light selection method: With the flashlight on, pressing the rear "Mode" button which, if pressed twice, activates the Strobe mode
Head: Aeronautical aluminum 
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a built-in, non-removable, rechargeable 21700 type 5000mAh battery
Measurements: 12.5cm (L) - 2.6cm (D shaft) - 4.0cm (D head)
Weight: 218.50g. battery included
Accessories: non-removable anti-roll ring, clip, wrist strap, sheath, USB charging cable type C
Waterproof: as per IPX-8 standard, submersible to 2m depth for 30min.
Impact resistance: withstands falls from 1m height

Lab-certified power and battery life to ANSI/NEMA FL1 standards using built-in 21700 5000mAh battery - data may vary under different conditions of use