torches

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

KEY FEATURES:
* Uses a Luminus SFT-40-W LED with a maximum power output of 1,800 lumens.
* Maximum light intensity of 41,000cd and maximum range of 405 meters.
* Glass and dishes with anti-reflective, crystal coating and with PDOT (Precision Digital Optics Technology) treatments.
* Powered by a high-capacity Li-ion 21700 battery and compatible with both 18650 and CR123 batteries to allow constant light for up to 1,500 hours.
* Tactical Mode and Daily Mode functions.
* Rear power button and side metal selection button control 5 different brightness levels and 3 special modes.
* STROBO mode constantly changes frequency randomly to maximize disorientation effects.
* Built-in illuminated potentiometer, located below the Mode button, which indicates the remaining battery charge.
* Built-in potentiometer can indicate the remaining voltage of the inserted battery, with minimal deviation (±0.1V)
* Built-in charging circuits via USB-C port.
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included.
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR temperature regulation technology (Patent No. ZL201510534543.6)
* Electronic protection against battery polarity reversal.
* Optical lenses with scratch-resistant coverage on both sides
* Constructed of solid aircraft aluminum alloy.
* Rugged HAIII type anodization with military specifications.
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Impact and drop resistant up to a maximum of 1m. height


TECHNICAL SPECIFICATIONS:
Led: 1x Luminus SFT-40-W with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically regulated
Powers and Durations: 1800 Lumens (0.45h) -> 1050 Lumens (3.15h) -> 260 Lumens (8.45h) -> 45 Lumens (47h) -> 1 Lumens (1500h) -> Strobe -> Beacon -> S.O.S.
Peak power: 41000 candles
Maximum lighting distance: 405m.
Lighting Method: Rear Button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2150 - also compatible with 1x 18650 Li-Ion 3.6/3.7V or 2x CR123 3.0/3.6/3.7V
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 2.54cm (D head) - 2.72cm (D tang)
Weight: 80g. without batteries
Accessories: NITECORE 21700 Li-ion Rechargeable Battery (NL2150 5,000mAh), USB-C charging cable, Clip, Wrist Corrector, Replacement O-rings, 18650/CR123 battery adapter, NTH10 tactical scabbard
Waterproofness: as per IP68 standard, submersible to 2m. depth for 30min.
Impact resistance: withstands falls from 1m height


Actual powers and durations, laboratory certified by ANSI/PLATO FL1-2019 standard

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

KEY FEATURES

* It uses two main LEDs 1XCREE XP-G3 S3 (3000K) Spotlight (from depth) and 1xCREE XP-G3 S3 (5700K) Floodlight (ambient), usable individually or combined and two small central auxiliary red light LEDs.

Maximum output power 520 lumens with depth about 103 meters
* Polymer torch body
* The torch consists of a double parabola (front) which guarantees a double possibility of illumination;

Parabola CREE XP-G3 S3 (3000K) Spotlight with 3 levels: 520 lumnes - 400 lumens (6 hours) - 100 lumens (10 hours)
CREE XP-G3 S3 dish (5700K) Floodlight with 2 levels: 200 lumens (8 hours) - 55 lumens (13 hours)

Central red LEDs: 16 lumens (6 hours)

* Maximum light intensity of 4120 cd and maximum range of 128 meters
* Powered by both USB-C Nitecore HLB1300 Rechargeable Li-ion Battery (included), and 3 AAA batteries
* Double button on, off and adjustment
* Wide 90 ° lighting angle, specially designed for hiking and sporting activities
* Elastic front band included, light and breathable
* Electronic protection against battery polarity inversion
* Made of ABS
* Submersible as per IP66 specifications
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

Battery (included): Nitecore HLB1300 Rechargeable Li-ion Battery USB-C rechargeable battery
Torch dimensions: 54.9x398.6x28.3mm.
Weight: 82.5g (flashlight only, without batteries, headband and holder for front use)
Lens: micro-blasted hardened glass
Body: ABS
Notes: water resistant as per IP66 standard.
NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

KEY FEATURES:

* 11 modes available with 5 light sources
* Possibility of continuous light or flashes in 5 different colors
* Built-in lithium-ion battery with a maximum autonomy of 50 hours
* Rechargeable with built-in USB-C port
* One-handed operation of the torch, via a single button
* An indicator light in the flashlight indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight bracket, with Velcro hooks on the back
* Made of sturdy and quality plastic materials
* Extremely lightweight and pocket-sized design
* Withstands impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 5x high power LEDs, white, red, blue, yellow, green, with a life cycle of 50,000 hours
Operating Modes: 5 colored flashes and a special mode (police warning with blue / red light)
Powers and Durations: Red 3 lumen 50 hr - Green 8 lumen 50 hr - Yellow 9 lumen 50 hr - White 15 lumen 40 hr - Blue 2 lumen 40 hr - Red / Blue 40 hr

Power on and selection method: Central button for power on, off and light selection
Body: thermoplastic materials
Battery: integrated, not removable, 300mAh Li-Ion, rechargeable via MicroUSB-C plug
Torch measurements with bracket: 61.8mm (Length) - 28.9mm (Width) - 21.7mm (Thick.)
Torch weight: 24.5g.
Weight with bracket: 35.5g.
Accessories: support bracket with hooks for the front and rear velcro - USB charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m in height
Note: -

Real powers and durations, certified in the laboratory by ANSI / NEMA FL1 standards

NU series product specially designed for law enforcement.
The NITECORE NU07 LE is a USB-C rechargeable mini sign light with 11 modes and 5 light sources with constant lighting or flashing red, green, yellow,
white / blue and red / blue police alarm.

The completely transparent shell makes the signals identifiable in all directions.

The flashing colors can indicate different groupings or allow for quick identification of team members in specific positions.

Thanks to the ARC adapter it can be attached to the helmet for special operations with quick and secure attachment.

Thanks to the innovative design of the rear clip, it can be easily attached to the standard MOLLE system.

The hook and loop attachment on the back of the bracket ensures a firm and secure fit.
The slots located on both sides of the bracket allow you to strengthen the attachment by fixing the helmet cable or the elastic to prevent accidental loss.

The single button interface is easy to use with a built-in 300mAh rechargeable lithium-ion battery allowing for up to 50 hours of runtime.

The waterproof design makes it IP66 rated.

The body is constructed of solid and durable PC materials with an ultra-light and compact design.

The NITECORE NWE30 an emergency gadget with an innovative design. It is an ultra-compact electronic emergency whistle with an easily operated twist-and-buzz interface. Instead of the conventional whistle method, it aims to support the user in case of severe injury, hypothermia or weakness. The omnidirectional sound diffraction system allows the signal transmission in all directions. When activated, it will buzz every 10 seconds. Just loosen the tail cap to turn it on and tighten it to turn it off.
Using specially 4 x Luminus SST-20-W LED with a cylindrical PC diffuser, the NWE30 is able to emit a 360 ° flash of 2,000 lumens automatically at night or in the dark when activated in an emergency situation while hiking outdoors in the forest, in the cave or during the night trekking. From night to day, it will automatically turn off the flashing of the headlight to save energy and ensure sufficient autonomy.
Compact body weighing only 35g, constructed of aircraft grade aluminum alloy with military grade anodized finish

LED: 4x Luminus SST-20-W LED with a lifespan of 50,000 hours
Output: 360 ° beacon 2000 lumens (72h.)
Battery: included - 1x CR123A
Measurements: 6.7cm (L) x 2.5cm (D)
Weight: 73g. - batteries excluded
Body: T6061 aircraft aluminum
Finish: anodized, Type III
Notes: Submersible up to 2m depth, as per IP68 specifications

KEY FEATURES

* Uses 1 x CREE XP-L2 V6 LED with a maximum output power of 1,100 lumens
* Lightweight and robust torch body, CNC machined, with excellent heat dissipation capabilities
* The torch is made up of a double reflective parabola (front and rear) which guarantees a dual lighting possibility;

Main parabola CREE XP-L2 V6 LED cold light (5700K) of 1100 lumnes and 80 meters of maximum depth
Secondary parabola CREE XP-L V6 warm light LED (3000K) with 920 lumens and 117 meters of maximum depth

* Maximum light intensity of 1,600cd and maximum range of 80 meters
* Powered with both 18650 and CR123 batteries
* Double power button and selection of the parabola to use and possibility of variation of 4 brightness levels and 2 special modes per parabola
* The integrated potentiometer can also indicate the residual voltage of the inserted battery, with a minimum voltage deviation (± 0.1V)
* Large lighting angle at 100 °, specially designed for hiking activities
* ATR (Advanced Temperature Regulation) technology for temperature regulation (Patent N ° ZL201510534543.6)
* Elastic band included, light and breathable
* Electronic protection against reverse polarity of the battery
* Built in solid aeronautical aluminum alloy
* Robust HAIII type anodizing with military specifications
* Submersible as per IPX8 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

LED PARABLE: 1 x CREE XP-L2 V6 cold light LED (5700K) with 50,000 hours life cycle
Output 4 constant light outputs, digitally regulated + 2 special modes
70 lumens (18h.) -> 200 lumens (8h.) -> 410 lumens (3h. And 45min.) -> 1100 lumens (1h. And 30min.) + Strobe, SOS
Range: up to 80mt.
Power peak: 1600 candles

LED PARABLE: 2 x CREE XP-L V6 warm light LED (3000K) with 50,000 hours life cycle
Output 4 constant light outputs, digitally regulated + 2 special modes
60 lumens (18h.) -> 170 lumens (8h.) -> 370 lumens (3h. And 45min.) -> 920 lumens (1h. And 30min.) + Strobe, SOS
Range: up to 117mt.
Power peak: 3460 candles

Battery (excluded): 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V
Torch dimensions: 95.9x27.6x25.3mm.
Weight: 82.5g (torch only, without batteries, elastic band and support for front use)
Lens: in hardened shot-peened glass
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height, with silicone hook
Notes: water resistant as per IP68 standard, submersible at 2mt. depth for 30min.

KEY FEATURES
* Uses 4 x CREE XP-G3 S3 LEDs with a maximum output power of 2,700 lumens
* Light and robust torch body with CNC machining, with excellent heat dissipation capabilities
* Uses a micro-blasted reflective parabola to guarantee a uniform and diffused light
* Maximum light intensity of 4,500cd and maximum range of 134 meters
* Powered by a high-capacity 21700 Li-ion battery that is compatible with both 18650 and CR123 batteries to allow constant light up to 1,200 hours
* A single power and selection button that controls 5 brightness levels and 3 special modes
* Integrated charging circuits for Li-ion batteries via Micro-USB port
* NITECORE 21700 Li-ion rechargeable battery (NL2140HP 4,000mAh) included
* STROBO mode constantly changes frequency randomly, to maximize disorientation effects * Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the battery inserted, with a minimum voltage deviation (± 0.1V)
* Wide 100 ° lighting angle, designed specifically for hiking activities
* ATR (Advanced Temperature Regulation) technology for temperature regulation (Patent N ° ZL201510534543.6)
* Elastic front band included, light and breathable
* Electronic protection against battery polarity reversal
* Built in solid aeronautical aluminum alloy
* Robust HAIII type anodization with military specifications
* Immersible as per IPX8 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height
* Flat, magnetic rear shank, to keep the torch standing or anchored to metal surfaces

TECHNICAL DATA:
LED: 4x Cree XP-G3 S3 with 50,000 hour life cycle
Output 5 constant light outputs, digitally regulated + 3 special modes
1 lumens (1200h.) -> 40 lumens (52h.) -> 270 lumens (8h. And 15min.) -> 800 lumens (3h.) -> 2700 lumens (45min.) + Strobe, Beacon and SOS
Capacity: up to 134mt.
Peak power: 4500 candles
Battery (included): 1x IMR 21700 rechargeable (NL2140HP 3.6V, 14.4Wh, discharge 15A); if necessary it can also work with 1x 18650 Li-Ion 3.7V or 2x CR123 3.0V without being able to reach 2700 lumens of power
Torch size: 128.2x26x28.3mm.
Weight: 100g (only torch, without batteries, elastic band and frontal support)
Lens: in micro-blasted hardened glass
Body: in aeronautical aluminum
Finish: anodized, Type III
Belt: elastic, adjustable in diameter and in height, with silicone coupling
Notes: water resistant as per standard IP68, submersible at 2mt. of depth for 30min. - Magnetic rear cap to hook it independently to any metal surface.
Included accessories: USB charging cable, clip, elastic front band, front support, wrist strap, spare o-ring

Kit edition, including elastic headband, bike attachment and Micro USB charging cable

Useful, compact, lightweight and powerful, this new Nitecore product features 2 red and 2 two white LEDs. Its small size makes it perfect for biking, walking, applying to pets, running.

Through one central button, the user can choose four different light outputs: 

* Steady white (40 lumens) - Ideal as a motion light.
* Red - slow flashing (4 lumens) - Ideal for hiking.
* Red - fast flashing (4 lumens) - Ideal for position signaling.
* White - slow flashing (40 lumens) - Ideal for position signaling 

Lab-certified powers and durations from ANSI/NEMA FL1 standards

Color of light: white and red
Materials: plastic
Modes: Red light (slow flashing), red light (fast flashing), white light (slow flashing), steady white light
Lumens: 4LM, 4LM, 40LM, 40LM
Duration: 10h, 10h, 4h, 1.45h
Battery: Rechargeable, 3.7V Li-ion, built-in and not removable
Switch Type: pressure
Impact Resistance: 1 meter
Max Output: 40 lumens
Waterproof: IP66 (dustproof and waterproof)
Weight: 24g
Measurements: 29.75mm x 29.5mm x 16.42mm - back loop with 25mm width

Utilizza un Led CRI a tonalità calda che permette all'occhio umano di riconoscere meglio i colori e le forme al buio; pensata soprattutto come torcia medica in modo da permettere al personale di effettuare diagnosi accurate. il Led CRI è fotobiologicamente sicuro, come da standard IEC/EN62471 ed elimina qualsiasi pericolo di luce azzurra emessa causa di danni fotochimici alla retina.

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x AAA 1.2V 750mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

LED: 1x Led Nichia 219B CRI - con un ciclo vitale di 50.000 ore 
Modi Operativi: 2, regolati elettronicamente
Potenze e Durate: 180 Lumens (45min.) -> 45 Lumens (5.15h.) -> 4 Lumens (35h.)
Picco di potenza: 860 candele
Distanza di illuminazione massima: 58m.
Metodo di accensione: Pulsante posteriore - Si accende sempre alla minima potenza
Metodo di selezione luminosa: Pulsante posteriore
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso e sistema PDOT brevettato
Batterie: funziona con 2 batterie usa e getta o ricaricabili AAA da 1.2/1.5V (vendute separatamente)
Misure: 12.8cm (L) - 0.55cm (D fusto) - 1.4cm (D testa)
Peso: 22g. batterie escluse
Accessori: clip, o-ring di ricambio
Impermeabilità: come da standard IPX-8 - immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezza