bing

sailing knives

Shop By
Shopping Options
Brand
  1. Benchmade 1item
  2. Fox Knives 3items
  3. Spyderco 22items
  4. Emerson 1item
Less
Stock
  1. In Stock 8items
  2. Out of Stock 19items
Rating
  1. 5
    5items
  2. 4
    & up
    11items
Set Ascending Direction

27 Items

  1. Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife

    A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

    A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

    Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


    Intended use: sub/sporting

    Type of production: industrial
    Country of manufacture: Japan
    Blade: nitrogen steel H1
    Blade finish: satin-finished
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 175mm.
    Thickness when closed: 15mm.
    Weight: 54g.
    Closure: Back Lock
    Clip: removable, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    SC88SYL
    €130.33
    Only 1 left
    Only 1 left
  2. Spyderco - Delica 4 Flat Plain - K390 Blue FRN - C11FPK390 - knife

    Intended use: Sports

    Type of production: industrial
    Blade: Bohler K390 carbon steel at 64 / 65HRC
    Blade treatment: satin finish
    Country of production: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Closed length: 107mm.
    Total length: 180mm.
    Weight: 66g.
    Closure: Back Lock
    Clip: removable, multi-position, in stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: variant in Blue FRN made of Bohler K390 carbon steel

    C11FPK390
    €155.74
    Only 1 left
    Only 1 left
  3. Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: Japan
    Blade: VG-10 58HRC stainless steel
    Blade treatment: satin finish
    Handle: FRN liners with embedded stainless steel
    Blade length: 75mm.
    Blade Thickness: 2.5mm.
    Closed Length: 107mm.
    Overall length: 180mm.
    Weight: 68g.
    Lock: Back Lock
    Clip: removable, multi-position, stainless steel
    Notes: Sharpening Flat Ground

    C11FWCBK
    €118.85
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  4. Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife

    Intended use: Sports

    Type of production: Industrial
    Production Country: Japan
    Blade: VG-10 58HRC stainless steel
    Blade treatment: satin finish
    Handle: FRN liners with embedded stainless steel
    Blade length: 75mm.
    Blade Thickness: 2.5mm.
    Closed Length: 107mm.
    Overall length: 180mm.
    Weight: 66g.
    Lock: Back Lock
    Clip: removable, multi-position, stainless steel
    Notes: Sharpening Flat Ground

    12638
    €113.93
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  5. Spyderco - Delica Flat Ground - Orange - C11FPOR - knife

    Intended use: Sporting

    Type of manufacture: Industrial
    Blade: Stainless steel VG-10 58HRC
    Blade treatment: -
    Blade production: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 180mm.
    Balance: -
    Weight: 66g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: Full-Flat Grind

    C11FPOR
    €113.93
    Only 1 left
    Only 1 left
    Rating:
    83%
    4.2
  6. Spyderco - Endura 4 Flat Ground - Gray - C10FPGY - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Gray FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Thickness when closed: 15.5mm.
    Balance: -
    Weight: 94g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: Full-Flat Grind

    C10FPGY
    €122.13
    Only 1 left
    Only 1 left
    Rating:
    80%
    4
  7. Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli

    Destinazione d'uso: Sportivo

    Tipo di produzione: industriale
    Lama: in acciaio inox VG-10 58HRC
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: in acciaio inox
    Lunghezza lama: 75mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 107mm.
    Lunghezza totale: 180mm.
    Bilanciatura: -
    Peso: 115g.
    Chiusura: Back Lock
    Clip: amovibile, multiposizione, in acciaio inox
    Fodero: -
    Note: -
    SP-C11S
    €114.75
    Only 1 left
    Only 1 left
  8. Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Black FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Balance: -
    Weight: 104g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: -

    C10SBK
    €122.13
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  9. Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Condition: in good condition
    Available in the market: YES
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: YES, small scratches
    Packaging: YES, Spyderco box but with incorrect product code
    Checked and Certified by our internal laboratory
    Intended use: Sports

    Type of production: industrial
    Blade: in VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Stainless Steel
    Blade length: 95mm.
    Blade thickness: 3mm.
    Closed length: 125mm.
    Total length: 220mm.
    Balance: -
    Weight: 161g.
    Closure: Back Lock
    Clip: removable, multi-position, in stainless steel
    Sheath: -
    Notes: -

    AP-C10S
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  10. Emerson - Mini A-100 - Black G10 - MINIA100SF - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially available Yes, but only in stonewashed "Thunderstorm" finish.
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Box: Present and original
    * Scabbard: not provided
    * Manuals, Certificates and Warranties: present.
    * Checked and Certified by our in-house laboratory




    Intended Use: Sporting

    Type of production: industrial
    Blade: stainless steel 154CM
    Blade finish: dual tone (satin and stone washed)
    Country of manufacture: USA
    Handle: G10 and titanium liners
    Blade length: 76mm.
    Blade thickness: 3.2mm.
    Length closed: 104mm.
    Total length: 183mm.
    Weight: 114g.
    Closure: Liner Lock
    Clip: removable, stainless steel
    Notes: Collected specimen from private collection, absolutely like new

    AP-EM-MA100
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  11. Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in very good condition.
    * Commercially available Discontinued since 2010.
    * Sharpening: Factory.
    * Marks on blade: slight marks near the handle, due to blade opening.
    * Marks on handle: No.
    * Box: Present and original
    * Scabbard: not provided
    * Manuals, Certificates and Warranties: no.
    * Checked and Certified by our in-house laboratory




    Intended Use: Sporting

    Type of production: industrial
    Blade: stainless steel VG-10 58HRC
    Blade finish: satin finish
    Country of manufacture: Japan
    Handle: FRN (fiberglass reinforced nylon)
    Blade length: 57mm.
    Blade thickness: 2.5mm.
    Length closed: 84mm.
    Total length: 141mm.
    Weight: 34g.
    Closure: Back Lock
    Clip: made of FRN, integrated into the handle
    Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

    AP-C28S
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  12. Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in good condition.
    * Commercially available Discontinued since 2010.
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: Slight signs of wear, especially on clip
    * Box: Present and original
    * Scabbard: not provided
    * Manuals, Certificates and Warranties: no.
    * Checked and Certified by our in-house laboratory



    Intended Use: Sporting

    Type of production: industrial
    Blade: stainless steel VG-10 58HRC
    Blade finish: satin finish
    Country of manufacture: Japan
    Handle: G10 Foliage Green and Stainless Steel
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 180mm.
    Weight: 90g.
    Closure: Back Lock
    Clip: removable, multi-position, stainless steel
    Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

    AP-C11GPFG
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  13. Spyderco - Delica 4 Wharncliffe Plain - C11FPWCBK - PRIVATE COLLECTION - knife

    Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

    Intended use: Sports

    Type of production: industrial
    Blade: VG-10 58HRC stainless steel
    Blade treatment: satin finish
    Production Lama: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Closed length: 107mm.
    Total length: 180mm.
    Weight: 68g.
    Closure: Back Lock
    Clip: removable, multi-position, in stainless steel
    Notes: Flat Ground sharpening

    AP-C11FWCBK
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  14. Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife

    Intended use: sub / immersion / sports

    Type of production: Industrial
    Country of production: Japan
    Blade: in H1 nitrogen steel
    Blade treatment: satin finish
    Handle: FRN (fiberglass reinforced nylon)
    Blade length: 58mm.
    Blade thickness: 2.5mm.
    Length closed: 85mm.
    Total length: 139mm.
    Weight: 37g.
    Closure: Back Lock
    Clip: stainless steel, removable and reversible
    Packaging: Cardboard box with Spyderco logos
    Notes: carbon-free blade, resistant to rust, oxidation and corrosion

    C28YL2HB
    €83.61
    Out of stock
  15. Benchmade - Pardue Griptilian Marine - Drop - Orange - 551H20 - folding knife

    Specifically designed for marine environments

    Intended use: Tactical / Sports
    Blade: N680 stainless steel HRC 57/59
    Country of Origin: United States of America
    Handle: FRN orange
    Blade length: 87 mm.
    Blade thickness: 3 mm.
    Closed Length: 117 mm.
    Overall length: 205mm.
    Weight: 110g.
    Lock: Axis Lock
    Clip: removable and reversible stainless steel
    Sheath: -
    cardboard box with Benchmade logos: Packaging
    Notes: Design by Mel Pardue

    BM-551H20
    €106.56
    Rating:
    100%
    5
    Out of stock
  16. Fox - Sailing Knife - FX-235 - Boat utility knife

    Intended use: knife for sailors

    Type of production: Industrial
    Country of production: Italy
    Blade: stainless steel 420 54 / 54HRC
    Blade treatment: satin finish
    Handle: FRN (Fiberglass Reinforced Nylon)
    Blade length: 75mm.
    Blade thickness: 3mm.
    Closed Length: 105mm
    Overall length: 180mm.
    Weight: 155g.
    Lock: Liner Lock
    Packaging: cardboard box with Fox logos
    Notes: untie knots, multipurpose tool

    12511
    €72.13
    Rating:
    100%
    5
    Out of stock
  17. Spyderco - Matriarch 2 - C12SBK2 - knife

    Spyderco - Matriarch 2 - C12SBK2 - knife

    Intended Use: EDC / Sports / Collection

    Type of production: Industrial
    Production Lama: Japan
    Blade: stainless steel VG-10
    Treatment Lama: -
    Handle: FRN Black
    Blade length: 90mm.
    Blade thickness: 2mm.
    Closed Length: 125mm.
    Overall length: 210mm.
    Thick when closed: -
    Balancing: -
    Weight: 98g.
    Closure: Back Lock
    Clips: stainless steel
    Sheath: -
    Packaging: Cardboard box with logos Spyderco
    Notes: -

    C12SBK2
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  18. Spyderco - Tusk Sailing Knife - C06TI

    Intended use: sailboat

    Type of production: Industrial
    Production Blade: Taiwan
    Blade: stainless nitrogen LC200N
    Treatment Blade: -
    Handle: Titanium
    Blade length: 60mm.
    Blade thickness: 3mm.
    Closed Length: 106mm.
    Overall length: 166mm.
    Thick when closed: -
    Balancing: -
    Weight: 119g.
    Lock: Frame Lock the blade and Ceramic Ball Lock on scioglinodi
    Clip: Multiposition and removable stainless steel
    Sheath: -
    Packaging: Cardboard box with logos Spyderco
    Notes: With schackle key and marlin spike

    10873
    €327.05
    Out of stock
  19. Spyderco - Dragonfly 2 Salt Yellow - C28YL2 - knife

    Intended Use: Sport / Sub

    Blade: Stainless H1 nitrogen
    Handle: FRN - Fiberglass Reinforced Nylon
    Blade length: 57mm.
    Blade Thickness: 2.5mm.
    Closed Length: 84mm.
    Total length: 141mm.
    Balance: -
    Weight: 34g.
    Closure: Back Lock
    Clips: stainless
    Sheath: -
    Notes: Resistant to rust and oxidation

    10130
    €81.97
    Rating:
    100%
    5
    Out of stock
  20. Spyderco - Lil Matriarch coltello - C162SBK - coltello

    Spyderco - Lil Matriarch knife - C162SBK - knife

    Intended use: EDC / Sports
    Type of production: Industrial
    Blade Production: Japan
    Blade: stainless steel VG-10
    Treatment Lama: -
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 2mm.
    Length closed: 107mm.
    Total length: 180mm.
    Thick when closed: -
    Balance: -
    Weight: 70g.
    Closure: Back Lock
    Clip: Stainless Steel
    Sheath: -
    package:
    Cardboard box with logos Spyderco
    Notes: -

    11000
    €113.93
    Rating:
    87%
    4.4
    Out of stock
  21. Spyderco - Delica 4 FRN - C11PBK - knife

    Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -

    2263P
    €113.93
    Only 0 left
    Only 0 left
    Out of stock
  22. Fox - Sailing Knife 233 - knife

    Intended use: knife to sailors
    Type of production: Industrial
    Production Lama: Italy
    Blade: 440A Stainless Steel 56 / 58HRC
    Blade treatment: -
    Handle: Aluminium Aeronautic
    Blade length: 70mm.
    Blade thickness: 3mm.
    Closed Length: -
    Overall length: 175mm.
    Thick when closed: -
    Balancing: -
    Weight: 210g.
    Lock: Liner Lock
    Clip: -
    Sheath: -
    Packaging: Cardboard box with Fox logos
    Notes: Untie knots forged - hole Gira crickets on the blade

    FX-233
    €86.07
    Only 0 left
    Only 0 left
    Rating:
    87%
    4.4
    Out of stock
  23. Fox - Sailing Sea Master - 234 - coltello da barca

    Destinazione d'uso: Sportivo / Nautico

    Tipo di produzione: Industriale
    Produzione Lama: Italia
    Lama: In acciaio inox 440C
    Trattamento Lama: -
    Manicatura: Acciaio Inox e G-10
    Lunghezza lama: 82mm.
    Spessore lama: 2.5mm.
    Lunghezza chiuso: 105mm.
    Lunghezza totale: 182mm.
    Spessore da chiuso: 11mm.
    Bilanciatura: -
    Peso: 126g.
    Chiusura: Frame Lock
    Clip: -
    Fodero: -
    Confezione: scatola in cartone con loghi Fox
    Note: Scioglinodi in acciaio inox con fermo di chiusura frame lock
    7219
    €94.26
    Out of stock
  24. Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - coltello

    Destinazione d'uso: Sportivo

    Tipo di produzione: industriale
    Lama: in acciaio inox VG-10
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: Acciaio Inox
    Lunghezza lama: 95mm.
    Spessore della lama: 3mm.
    Lunghezza chiuso: 125mm.
    Lunghezza totale: 220mm.
    Bilanciatura: -
    Peso: 161g.
    Chiusura: Back Lock
    Clip: amovibile, multiposizione, in acciaio inox
    Fodero: -
    Note: -
    3669
    €147.54
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  25. Spyderco - Pacific Salt Black - C91SBK2 - coltello

    Destinazione d'uso: sub/sportivo

    Tipo di produzione: Industriale
    Produzione Lama: Japan
    Lama: in acciaio all'azoto H1
    Trattamento Lama: -
    Manicatura: FRN
    Lunghezza lama: 95mm.
    Spessore lama: 3mm.
    Lunghezza chiuso: 123mm.
    Lunghezza totale: 220mm.
    Spessore da chiuso: 15mm.
    Bilanciatura: -
    Peso: 82g.
    Chiusura: Back Lock
    Clip: amovibile, in acciaio inox
    Fodero: -
    Confezione: scatola in cartone nera e rossa con loghi Spyderco
    Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.
    3699B
    €118.85
    Out of stock
  26. Spyderco - Pacific Salt Yellow - C91SYL - coltello

    Destinazione d'uso: sub/sportivo

    Tipo di produzione: Industriale
    Produzione Lama: Japan
    Lama: in acciaio all'azoto H1
    Trattamento Lama: -
    Manicatura: FRN
    Lunghezza lama: 95mm.
    Spessore lama: 3mm.
    Lunghezza chiuso: 123mm.
    Lunghezza totale: 220mm.
    Spessore da chiuso: 15mm.
    Bilanciatura: -
    Peso: 82g.
    Chiusura: Back Lock
    Clip: amovibile, in acciaio inox
    Fodero: -
    Confezione: scatola in cartone nera e rossa con loghi Spyderco
    Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.
    3699
    €118.85
    Out of stock
  27. Spyderco - Tasman Salt - C106PYL - knife

    Spyderco - Tasman Salt - C106PYL - knife

    Intended Use: Dive / Sports

    Type of production: industrial
    Blade: Stainless nitrogen H1
    Treatment Lama: -
    Blade Production: Japan
    Handle: FNR
    Blade length: 75mm.
    Blade Thickness: 2mm.
    Closed Length: 100mm.
    Total length: 172mm.
    Balance: -
    Weight: 56g.
    Closure: Back Lock
    Clip: removable and reversible stainless steel
    Sheath: -
    Note: This knife has a steel blade PH (precipitation hardened) that will not rust as it contains only 0.15% carbon and about 0.10% on the nitrogen making it particularly suitable for use underwater and marine. The product ratings are therefore no data considering this primary use.

    3651
    €106.56
    Only -99 left
    Only -99 left
    Out of stock
Set Ascending Direction

27 Items





ecommerce sicuro