used guaranteed

COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio interno

Il KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari. 

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Not available (limited run sprint run in K390 steel).
* Sharpening: Re-sharpened
* Marks on blade: Small marks, especially near the tip, left side
* Marks on handle: Signs of wear on the titanium clip, a major scratch on the right side of the handle, above the frame
* Box: Present and original, in cardboard.
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting/Collection

Type of Production: Industrial
Country of Production: Italy
Blade: In cold work tool steel Bohler K390 hardened to 64/65HRC
Blade finish: Microbead blasted and matted
Handle: Titanium
Blade length: 74mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 74g.
Closure: Titanium Frame Lock with steel clapper
Clip: Titanium 6Al4V
Packaging: Cardboard box with LionSteel logos
Notes: Opening on IKBS ball bearings with carson flipper system - DIffers from the standard model in both the steel used, the upper blade profiling, the finish of the blade, the packaging, and the lack of possibility to customize the opening system by removing the flipper - previously purchased knife from a private collection

Knife withdrawn from private collection, like new, with original case - Model "made in Switzerland" made in collaboration with Klotzli in 1994 in about 1,000 numbered examples on the blade (about 500 plain edge and about 500 partially serrated) based on a design by famous American designer Michael Walker. Knife that combines two qualities difficult to match, especially in those years; lightness and sturdiness. Elegant gentlemen, easy to open and close with one hand thanks to the Liner-Lock system, invented by Walker himself. Peculiarities of this very rare production are also the engravings on blade and clip made by excision and not by laser.
 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available Discontinued.
* Sharpening: Factory sharpened, perfect
* Marks on blade: no
* Marks on handle: no
* Box: Original leather pouch with zipper and spyderco logos.
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory


Intended use: sporting / collection

Type of production: industrial
Country of production: Switzerland
Blade: stainless steel ATS-34
Blade finish: Satin finish
Handle: carbon fiber with blue anodized titanium hardware
Blade length: 64mm.
Blade thickness: 2.4mm.
Length closed: 84mm.
Total length: 149mm.
Weight: 42g.
Closure: LinerLock in blue anodized titanium
Clip: blue anodized titanium
Notes: 1994 production, discontinued, numbered on blade (#625) - Design by Michael Walker

COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato - coltello non più in produzione
* Condizioni: ottime condizioni
* Reperibile in commercio: di difficile reperibilità
* Affilatura: riaffilato dal nostro laboratorio
* Segni su lama: priva di segni
* Segni su impugnatura: priva di segni
* Scatola: scatola originale Fox
* Manuali, Certificati e Garanzie: -
* Controllato e Certificato dal nostro laboratorio interno Coltelleria Collini

Destinazione d'uso: Tattico / Escursionistico

Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58/60HRC
Paese di produzione: Italia
Manicatura: in forprene, amovibile
Lunghezza lama: 220mm.
Spessore della lama: 6mm.
Lunghezza totale: 357mm.
Bilanciatura: avanzata, a 45mm dal ramo di guardia inferiore
Peso: 380g.
Fodero: in cordura 1000D OD Green, compatibile MOLLE
Note: trattamento superficiale Foxionic a 72/75HRC

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Rare model of the Police 2 - years 2002 - 2006
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: In VG10 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:

Knife withdrawn from private collection - Used, but overall in good condition - An iconic, iconic knife from the first decade of the 2000s, tested and selected by the U.S. Navy Seals - The knife already when new presented itself with an average low level of finish and with a rough micropeened blade already very delicate and marked, this knife, used in the field by an Italian soldier in theaters of war, shows signs of cosmetic wear on both blade and sheath that do not affect its functionality in the slightest - Factory sharpening still in excellent condition - Original amphibious scabbard, in very good condition - No box - Checked and certified by our in-house laboratory.

Intended Use: Tactical / Multirole

Type of Manufacture: industrial
Blade: A2 steel hardened to 57/58HRC
Country of Production: USA
Handle: made of Hytrel
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 360g.
Sheath: amphibious, made of Hytrel
Packaging: without original packaging
Notes: used knife, withdrawn from private collection, overall in good condition

Collected from a private collection - used, still in good condition, with worn blade and uneven burnishing - still with factory sharpening, but can be improved - accompanied by original sheath, in very good condition - no box and paper warranty certificates - checked and certified by our in-house laboratory

Intended Use: Tactical / Military

Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: detachable, made of Kraton
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Balance: set back, 1 cm. from the lower guard branch
Weight: 265g.
Sheath: modular tactical, thigh or belt, made of Nylon
Packaging: -
Notes: used knife, withdrawn from a private collection, with signs of wear but overall in good condition

Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good condition

Knife withdrawn from private collection - FULCRUM T model overall in good condition. Has marks on the blade and handle - Devoid of box - Checked, re-sharpened and certified by our in-house laboratory Coltelleria Collini.

Intended use: tactical/military/backup

Blade: stainless steel N690Co 58HRC
Handle: Anticorodal thickness 4.5mm 
Blade length: 95mm.
Blade thickness: 6mm.
Length closed: 127
Total length: 220mm.
Balance: -
Weight: 200g.
Closure: Back Lock
Clip: removable and reversible stainless steel
Sheath: cordura
Notes: safety mechanism on both opening and closing

Extrema Ratio closers:
Directly derived from military specifications,this opener was developed to replacein use a fixed blade.
This was achieved by employing extremely strong materials, high thicknesses and a solid and secure opening/closing system: the back lock.
The knife is equipped with a manual safety lock that gives maximum safety in use and reduces the risk of accidental closing in a hieradrastic manner.
The safety, when engaged in closing, prevents operatorsimilitary or police that in the case of embezzlement the knife could be turned against them.
Materials and workmanship:
All parts of the knife are machined from solid by high-precision CNC machines while assembly, adjustment and sharpening are conducted by hand.
The blade is made of N690 cobalt stainless steel,a steel with very high characteristics of resistance to mechanical stress, cutting ability, edge retention and corrosion resistance.The rounding is flat and the hardness is 58HRC.
The handle grips are made of Anticorodal, an aluminum alloy with high mechanical stress and oxidation resistance qualities.
The tang, made of hardened N690, is an effective emergency crystal breaker. All hardware, pins and laclip are made of burnished stainless steel. The blade, lever and tang are coated with Testudo treatment,very resistant to abrasion and oxidation.The grips are black anodized.

Knife withdrawn from private collection. Overall in good condition has a number of surface scratches on the blade, small marks on the clip. Complete with cardboard box. Checked, certified and re-sharpened by our in-house laboratory Coltelleria Collini. 

Intended Use: Tactical/Sportsman

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: black cardboard box with Extrema Ratio logos and certificate

Knife withdrawn from private collection - Rare model and out of production for many years, dating back to 1995 with blade made of Japanese GIN-1 steel - Overall in excellent condition. Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: Gin-1 stainless steel
Blade treatment: -
Handle: steel
Blade length: 50mm.
Blade thickness: 2.5mm.
Closed length: 77mm.
Total length: 126mm.
Thick when closed: 6mm
Balancing: -
Weight: 71g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box
Note:

Knife out of production and no longer available, from a private collection, previously used, re-sharpened and with signs of wear on the finish of the blade and the sheath - Overall in good condition, previously used, still has a very good sharpness and shows some signs of wear on the finish of the blade - Handle in perfect condition - The sheath shows visible signs of wear but does not affect in any way the functionality, use or portability - Accompanied by original cardboard box - Checked and guaranteed by our internal laboratory.

Intended Use: Tactical / Hiking

Type of production: industrial
Blade: Stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: in forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: advanced, at 45mm from the lower guard branch
Weight: 380g.
Sheath: Cordura 1000D OD Green, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC