accessories for flashlights

Multifunctional commuter backpack

Designed with the everyday commuter in mind, the Nitecore BP23 backpack is a stylish and innovative large-capacity bag that can accompany you in your daily routine or serve as a reliable travel companion.

The main compartment of the BP23 Tentacle opens fully like the 'lid' of a duffel bag, allowing you to make the most of every inch of space. The BP23 even incorporates additional space inside the lid where other backpacks waste space.

Thanks to the quick-release buckles on the shoulder straps, you can instantly take the weight off your shoulders once you reach your destination. Simply press the arms of the side release buckle to feel the weight literally fall off.

To optimise carrying comfort, the backpack rests on the back thanks to a breathable polyurethane surface with cooling mesh fabric. Halfway up the back surface of the backpack, a traveller's favourite accessory for mounting the BP23 on the extended handle of wheeled luggage is incorporated: the trolley sleeve. The unique pressure-relieving design of this backpack makes it great for tackling high-strength activities, such as a trip abroad.

Notable features
" The front exterior compartment boasts the simple innovation of a stylish slanted zip that allows easy access to the interior, just like diagonal trouser pockets.
" The high-visibility glossy orange interior walls reflect ambient light and make the contents of the bag stand out with their brilliant colour.
" The upper outer pocket is lined with a soft flock lining (similar to the felt on billiard tables) to prevent smartphone scratches and allow for quick removal.
" Long-lasting quality zip pulls make it easy to open and close zips and are designed to withstand repeated, rigorous opening and closing.

Measurements
Capacity: 23 l
Number of closable compartments: 4
Number of closable pockets: 2
Height: 15 Cm
Length: 47 Cm
Width: 29 Cm
Weight: 1,240 g

Commuter Backpack
The Nitecore BP16 is the backpack for going anywhere and doing anything. Designed for the modern man on the move, the BP16 combines ample interior space with a lightweight and comfortable construction. This backpack can be carried over the shoulder or stored as a convenient carry-on when travelling. Made of durable 500D polyester, this backpack is perfect for any adventure, regardless of the weather. Multiple pockets will keep you organised, including a handy insulated compartment for a snack or drink. An excellent choice for school, commuting or outdoor trekking.

Features
" High-strength 500D polyester fabric
"16 litre large capacity main compartment
" Can hold laptops up to 14 inches long
" Spring strap system for modular extensions
"Multifunctional interior compartments
"Insulated compartment for food or snacks
" Breathable shoulder straps for superior comfort

Measurements

- Number of closable pockets: 5
- Height: 14Cm
- Length: 46Cm
- Weight: 815g
- Width: 29Cm

COMPATIBILITY:
Only with the following NITECORE flashlight models: P10i, P10iX, P20i, P20i UV, P20iX, P30i, P35i


DESCRIPTION:
2.4G radio-frequency wireless remote switch to remotely control in ignition and light selection your NITECORE flashlight belonging to the "i" series to be used by replacing the back cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is to be mounted in place of the original flashlight cap and a wireless remote control to be placed via hook-and-loop (provided) or Velcro (provided) to your firearm or wherever you find most convenient within a range of about 1m. so that you can turn on and control your flashlight without the hassle of a cable.

It allows both temporary lighting of the light (light is emitted by pressing and holding the pad, goes out by releasing it) and strobe function via dedicated button; it also allows fixed lighting of the light with subsequent possibility of varying its luninous power.


PACKAGE CONTENTS:
* Wireless back cap
* Wireless remote switch already paired and with batteries already inserted
* Velcro-type strap closure
* Velcro-type hook-and-loop strap
* 2 Picatinny rail mounts

Nylon tactical belt sheath, with magnetic closure, designed to prevent accidental activation while carrying.

Compatibility:
* NITECORE P20i
* NITECORE P20i UV
* NITECORE P20iX

Dimensions:
155mm x 59mm x 50mm.

Material:
Nylon with quick-release rear belt loop and rigid polymer hook

The LMA1 is an ARC Ops-Core compatible military helmet mount, specially designed for law enforcement, fire, search and rescue.

It can hold a torch with a standard 1 "(25.4mm) tube diameter and rotates 360 ° with quick and easy adjustment in 8 directions.

Constructed from aerodynamic grade aluminum alloy with HA III military grade hard anodized finish, it is lightweight, durable and with excellent impact resistance. Perfect for law enforcement, firefighters and search and rescue.

Specifications:
Tube diameter: 1 inch (2.54cm), which means it fits all 1 "body torches.
Length: 4.50 cm
Width: 4.40 cm
Height: 4.29
Weight: 1.59 oz

Material: aero grade aluminum alloy
Finish: HAIII military grade anodized

Green filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a green light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

The Nitecore BP18 is a computer backpack with a robust and practical design perfect for travel or for those who travel frequently. Made from 500D nylon fabric, this backpack is dirt and water resistant, making it perfect for city or rural travel.

The main compartment of the package has a volume of 18 liters and can hold laptops up to 13 inches in length. The BP18 obviously has many other compartments including one for hydration backpacks and a series of internal compartments on the sides for tools or valuables.

This pack also features a tactical-style MOLLE texture that allows users to customize their carrying experience with compatible gear and backpacks.

Notable features
»500D nylon fabric resistant to wear with dirt and water resistant
"18 liter large capacity main compartment
»Can hold laptops up to 13" in length
»Molle belt system for modular extensions

Dimensions
16cm (L) x 24cm (W) x 47cm (H)

Weight
Approx. 710g / 1.6lbs

Original Nitecore remote control to be used by replacing the rear cap of your flashlight; ideal to be used with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is mounted in place of the original cap of the flashlight and a removable remote cable that attaches via USB-C plug. Once plugged in, it allows both the temporary switching on of the light (the light is emitted by pressing and holding the pad, it turns off by releasing it) and the strobe function through a dedicated button; it also allows the fixed switching on of the light with the subsequent possibility to vary its light power.

On the back, the aluminum cap has also a standard integrated power button that allows to use the flashlight normally (on and off), but that does not allow to select the light power or the STROBO light.

Diameter cap: 28.6mm
Total cable length: 307mm

Compatible only with models

P10i, P20i and P30i

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

Filtro azul ultra transparente con cuerpo de goma adaptable a diferentes tipos de antorchas con cabezas de 25 / 25,5mm de diámetro.

Este filtro transforma el haz de tu linterna en una excelente luz azul para ser utilizada al mismo tiempo que las gafas de noche y adecuada para no asustar a los animales. También es adecuado para la lectura táctica de mapas y documentación diversa.

Compatibilidad:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Accessory for Nitecore tactical flashlights made of aeronautical aluminum with HA III type military anodization, it is compatible with any flashlight that has a 1 "(2.54cm) diameter barrel.

Compatible with Picatinny rails, it has dimensions of 71mm (height) x 30mm (width) x 31mm (length) and a weight of 73g.

* Easy to attach and remove
* Central fixing screw that does not require tools
* Compatible with 1 "/ 2.54cm cylindrical shaft flashlights

Model: MP20
Type: modular backpack
Capacity: 20L
Dimensions: 45 x 26 x 15 cm
Auxiliary compartment: suitable for 14 "laptop / tablet
Weight: 1.3 kg
Available colors: black

Technical features

- Premium YKK zippers
- Innovative cable holes designed on both sides
- Integrated laptop / tablet compartment
- UTX Duraflex buckles
- MOLLE system with laser cut for modular extensions
- Designed for commuters, hikers
- 500D nylon fabric resistant to wear and water
- 20 liter main compartment with full opening
- Interior design with a combination of ring surface and MOLLE system

Model: MP25
Type: modular backpack
Capacity: 25L
Dimensions: 50 x 27 x 17 cm
Auxiliary compartment: suitable for 14 "laptop / tablet
Weight: 1.5 kg
Available colors: black

Technical features

- Premium YKK zippers
- Innovative cable holes designed on both sides
- Integrated laptop / tablet compartment
- UTX Duraflex buckles
- MOLLE system with laser cut for modular extensions
- Designed for commuters, hikers
- 500D nylon fabric resistant to wear and water
- 25 liter main compartment with full opening
- Interior design with a combination of ring surface and MOLLE system

Original Nitecore remote ignition control to be used by replacing the rear cap of your flashlight; ideal for use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary switching on of the light by pressing the special remote rubber pad; the light will go out as soon as the pressure on the pad is stopped. It also integrates a standard power button on the side which allows the torch to be used normally.

Cap diameter: 28.6mm
Total length: 307mm

Compatible only with models:

NEW P12 - NEW P30

The NTR10 is a practical ring to be attached to the body of the torch via clips, which allows a more stable and secure grip even in the operating environment or with the use of gloves. The NTR10 maintains all the functionality of the metal clip and can also allow the torch to be carried in a pocket, belt or bag.
The NTR10 is compatible with almost all Nitecore torch models

Green filter made of ultra-transparent hardened glass with rubber body, so that it can be adapted to different types of torches with 70mm diameter heads.

This filter transforms the beam of your torch into red light suitable for hiking, outdoor and for hunting purposes since it does not scare and alert the animals. Also suitable for tactical reading of maps and various documentation.

Compatibility: only for NITECORE MH40GTR

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GTS, MH25GTS, P12GTS

Urban / hiking backpack made of Nylon 600 denier, very light and resistant, also designed to accommodate electronic devices and laptops up to 14 "

Features and Materials:
- 600 denier Cordura Nylon resistant to water and abrasion
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for intensive use
- Main compartment and front compartment both with full zip opening
- YKK hinges of Japanese production
- Ventilated backrest
- Reinforced handle and stitching
- Possibility of being used with a shoulder strap, a single shoulder, a handle or anchored to a trolley
- Quickly and easily adjustable shoulder strap detachable
- Front compartment with document holder and hooks for hanging keys
- Dimensions main main compartment: 40x25x7.5 cm.
- Front compartment dimensions: 33x20x2 cm.
- Weight: 0.95 kg.

The Nitecore NCP30 tactical sheath is a robust, multifunctional product, ideal for torches and multipurpose.
The scabbard also offers a small side compartment for carrying pens and penlights.
Made of 900D Cordura Mil-Spec Nylon, the ncp30 sheath can be easily mounted on a belt or
other MOLLE systems.

Compatible torch models:
EA21 EC20 EC25 MT25 MT2C MT20C MT06 P20 P20UV P10 P12 SRT5 MH2C MH10 MH12

Measurements:

Item weight: 54.4 g
Product dimensions: 8.4 x 4.3 x 2.5 cm

The Nitecore NCP30 tactical sheath is a robust, multifunctional product, ideal for torches and multipurpose.
The scabbard also offers a small side compartment for carrying pens and penlights.
Made of 900D Cordura Mil-Spec Nylon, the ncp30 sheath can be easily mounted on a belt or
other MOLLE systems.

Compatible torch models:
EA21 EC20 EC25 MT25 MT2C MT20C MT06 P20 P20UV P10 P12 SRT5 MH2C MH10 MH12

Measurements:

Item weight: 54.4 g
Product dimensions: 8.4 x 4.3 x 2.5 cm

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile anche con modelli di altre marche con fusto di diametro di 1" / 2.54cm

Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico.
- Materiali: alluminio aeronautico anodizzato
- Misure: 50mm lunghezza x 65mm altezza
- Diametro utile torcia: da 24mm a 27mm

Note: Objects and products in the images are not included with the pouch and are solely for the purpose of showing the containment capacity of the product.

Practical Cordura handbag, lightweight and durable, designed to carry and carry LED torches, lock knives, multi-purpose knives and multi-purpose pliers, along with keys, wallets, electronic items etc.

It can be used both on handle and shoulder straps or through MOLLE compatible mounts. - Offers two large compartment compartments closed independently with zip.

Features and Materials:

- Cordura Nylon 1000 denars water resistant and abrasion with parts in Hypalone (synthetic rubber)
- External fabric treatment that ensures dirt resistance and facilitates maintenance
- Designed for daily use or for excursions
- Compartment pockets to accommodate different utensils
- Soft interior to protect hosted utensils
- Nylon internal elastic in order to optimally modulate the hosted tools
- Full operation from ambidextrous
- MOLLE rear coupling systems, high resistance nylon
- Handle with reinforced grip
- Adjustable nylon strap
- Weighs only 311.5g
- Frontal compartment of 15x15x2cm
- Back panel of 22x16x4cm

Tactical Backpack Cordura, lightweight and durable, designed for hiking, tactical and urban use.

Features and Materials:

- Cordura Nylon 1000 denars water resistant and abrasion with synthetic velvet parts
- External fabric treatment that ensures dirt resistance and facilitates maintenance
- Designed for intense use and excursion
- Compartment pockets to accommodate different utensils
- Padded and ventilated back and shoulder straps
- Reinforced handle
- Anchor Points for LED Signaling Lights (eg Nitecore NU05)
- Stretched and long size Zip, comfortable to use with gloves
- Large Velcro area for anchoring patches and various objects
- Compression center belt for anchoring objects and compacting the load
- MOLLE Compatible Front to Expand and Modify the Backpack
- Side nylon bandlets for hooking up items and additional buffets
- Large internal pocket, can accommodate a laptop of 13 "
- Integrated clip to hold water bags, bottles and hydratation packs
- Integrated rain cover in the back of the backpack
- Dimensions: 45x28x12 cm.
- Volume: 20 l.
- Weight: 1.5 kg.

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

Filtro verde realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

cordino universale per torcia

universal lanyard for led flashlight

Filtro verde realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 40mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 40mm.

Questo filtro trasforma il fascio della vostra torcia in luce rossa ottima da utilizzare contestualmente ai visori notturni ed adatta a non spaventare animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: EA4 - EA41 - P15 - P16 - P25 - SRT7 - CR6 - CI6 - CU6 - MH25 - MH25GT - MH25S - MH27 - MH27UV - TM03 - TM9K - TM9K TAC

Original Nitecore remote ignition control to be used by replacing the rear cap of your torch; ideal to use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary lighting of the light by pressing the special remote rubber pad; the light will switch off as soon as the pressure on the pad is interrupted. Laterally it also incorporates a standard ignition button that allows the torch to be used normally.

Only compatible with models:

  MH12GT, MH25GT, P12GT, P10, P30, SRT7, SRT9, MH27, MH27UV

Sistema di aggancio di tipo Tek-Lok pensato per i modelli di torce tattiche Tomahawk di First Light

Adattatore porta torcia in alluminio anodizzato nero, diametro 20 mm massimo

Attraverso questo attacco a è possibile agganciare alla canna del fucile o dell'ottica (diametro massimo 20mm) qualsiasi aggancio porta torcia dotato di sistema a slitta (Picatinny / Weaver rail tactical weapons systems).

- Materiali: Alluminio
- Peso: 45g
- Diametro di fissaggio: da 15mm a 20mm

fodero in cordura per torce a led: TM10K - TM9K - NC10000

Misura tasca: 3,5 x 4 x 8 cm

Misura esterna: 3,5 x 5 x 10,5 cm

cordura sheath for led flashlights: MH40 - MH40GT - MH40S - P35i

Pocket size: 6 x 3.5 x 10 cm

External measurement: 6.6 x 4 x 15 cm

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile con modelli di altre marche

Attraverso questo attacco, è possibile fissare una torcia alla slitta di un fucile.
(Picatinny / Weaverrail tactical weapons systems)
- Materiali: alluminio
- Misure: 44mm x 45mm
- Diametro di fissaggio: da 25mm a 27mm

Kit composto da 2 attacchi per fucile universali a forma di "8" fissati da due viti centrali.

* 1 Attacco con diametro 25mm (lato torcia) e 25mm (lato fucile / ottica)
* 1 Attacco con diametro 25mm (lato torcia) e 18mm (lato fucile / ottica)
* Entrambi gli attacchi sono realizzati in solido acciaio inox verniciato di nero
* Compatibili con torce dotate di testa con diametro massimo di 4/4.5cm; un diametro superiore fa toccare la testa della torcia alla canna

Attraverso questo attacco è possibile fissare una torcia alla canna o all'ottica di un fucile o di una carabina dotata di un punto di aggancio con diametro di 18mm o 25mm. Grazie alle due viti poste centralmente, è possibile il fissaggio su diametri diversi di canne in modo da avere una regolazione fine.

Accessorio originale Nitecore, compatibile con qualsiasi marca di torce presenti in commercio.