flashlights hiking

The NITECORE MH25 V2 Next Generation 21700 Dual Fuel Long Range Flashlight is now available as the latest upgraded NITECORE classic model of the Multitask Hybrid series. The MH25 V2 uses a high performance LED to emit a maximum output of 1300 lumens and is equipped with a combined optical system with crystal coating and "Precision Digital Optics Technology" (PDOT) to provide a maximum range of 475 meters and a maximum intensity peak radius of 57,000 cd.

The metal side switch of the MH25 V2 provides better feedback for the user even with gloves and controls 4 brightness levels and 3 special modes. The tactical tail switch is always ready to enter tactical or HIGH level mode. The STROBE mode is made up of frequencies that change randomly to allow for strong dizzying effects.

An intelligent lithium-ion battery charging circuit with a USB charging port is integrated in the MH25 V2 - The charging time is approx. 3 hours 45 minutes, which allows you to recharge the flashlight more conveniently to avoid power outages. In addition, the charging port cap can provide excellent water, dust and shock resistance.

The 5,000 mAh lithium-ion battery gives the MH25 V2 a maximum range of 1,500 hours on ULTRALOW while it is compatible with 1 18650 battery or 2 CR123 / RCR123 batteries.

KEY FEATURES:

* Uses a Luminus SST-40-W LED with a maximum output power of 1,300 lumens
* Maximum light intensity of 57.000cd and maximum range of 475 meters
* Glasses and parables with anti-reflective, crystal coating and PDOT (Precision Digital Optics Technology) treatments
* Powered by a 18650 and CR123 battery to allow constant light up to 1,500 hours.
* Tactical Mode and Daily Mode functions
* The rear power button and the metal side selection button control 4 different brightness levels and 3 special modes
* STROBE mode constantly changes frequency randomly, to maximize disorientation effects.
* Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the inserted battery, with a minimum voltage deviation (± 0.1V)
* Charging ICs via USB-C port
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR technology (Advanced Temperature Regulation) for temperature regulation (Patent N ° ZL201510534543.6)
* Electronic protection against battery polarity inversion
* Optical lenses with anti-scratch cover on both sides
* Constructed from solid aircraft-grade aluminum alloy
* Rugged HAIII type military specification anodizing
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL SPECIFICATIONS:
Led: 1x High performance LED with a life cycle of 50,000 hours
Operating Modes: 4 light modes and 3 special modes, all electronically adjusted
Powers and Durations: 1300 Lumens (3h) -> 300 Lumens (8,5h) -> 50 Lumens (50h) -> 1 Lumens (1500h) -> Strobo -> Beacon -> S.O.S.
Peak power: 57000 candles
Maximum illumination distance: 475m.
Ignition method: Rear button with "Momentary On" system for light signals
Light selection method: Front button placed under the head
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 18650 Li-Ion 3.6 / 3.7V or 2x CR123 3.0 / 3.6 / 3.7V (not included)
Measurements: 15.7cm (L) - 2.54cm (D stem) - 4.0cm (D head) - 2.72cm (D tang)
Weight: 137g. without batteries
Accessories: wrist strap, ABS belt sheath, spare o-ring, clip, adapter for 18650 batteries, USB charging cable,
Water resistance: as per IP68 standard, submersible up to 2m. depth for 30min.
Impact resistance: withstands drops from 1m in height

NITECORE ITALIA warranty: 5 years warranty on the torch; limited warranty on battery and accessories

Key Features

Triple output USB-C rechargeable headlamp, made of solid metal
It uses a Luminus SST-40-W primary LED with a maximum output of 1,750 lumens
Equipped with two auxiliary lights: one white with high CRI (CRI≥90, Color temperature: 4500K) and one red
Unibody lens of TIR type to emit a uniform and soft light
Maximum light intensity of 7,000cd and maximum range of 165 meters
The highly efficient constant current circuit provides stable light output for up to 800 hours
Built-in Li-ion battery charging circuit, via USB-C port
180 ° adjustable tilt angle for various lighting needs
The indicator under the switch indicates the remaining battery charge (Patent ZL201220057767.4)
The indicator also indicates the battery voltage (± 0.1V)
Built-in advanced temperature regulation module (ATR) (Patent ZL201510534543.6)
Constructed from aircraft grade aluminum alloy
Tough anodized finish, military grade HA III
Classified as waterproof and dustproof as per IP68 standard (submersible up to 2m)
Shock resistant up to 2 meters high

LED: 1x Luminus SST-40-W with a lifespan of 50,000 hours
Output: 8x constant light output, digitally regulated and 3 signaling modes
Power and duration of main white light: 1 lumen (800h.) -> 50 lumens (28h.) -> 250 lumens (6h.) -> 900 lumens (2.15h.) -> 1750 lumens (30 * min. - without holding account of automatic temperature adjustment) -> Beacon -> SOS
Powers and durations of the auxiliary red light: 3 lumens (110h.) -> 11 lumens (30h.) -> flashing at 11 lumens (57h.)
Powers and duration of auxiliary white light: 24 lumens (42h.)
Range: up to 165mt.
Peak of power: 7000 candles
Usable batteries: 1x 3.6V 18650HP (included in the package) or 2x 3.0 / 3.7V disposable or rechargeable CR123A
Torch dimensions: 90.8x34.7x26.9 mm.
Weight: 65.5g (without battery)
Lens: in hardened glass with anti-reflection treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Accessories included: 1x 3.6V and 3500mAh 18650 NL1835HP battery - USB charging cable - front elastic strap - front bracket - spare rubber button - spare o-ring
Integrated Charging System: through the integrated USB-C port - protected by an insulated cover - and using the USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special LED light placed next to it. below the light selection buttons. The charging cable can be attached to any PC with a USB port or to any wall or cigarette lighter power supply with a USB port.
Notes: waterproof and submersible as per IP68 standard - the 1750 lumens of power can only be obtained using a battery with discharge power equal to or greater than 8A (included); using different batteries, the maximum output will be limited to 900 lumens.

Powers and durations certified by ANSI / PLATO FL1-2019 standards tested with 1x 18650 HP 3500mAh

Flashlight designed for operational use (law enforcement, security institutions, patrol vehicles) and abitatibo equipped with magnetic induction charging or via USB-C cable - Comes with a base of support charging, a wall mount charging, a USB cable and a car socket for cigarette lighter so you can recharge in any situation.

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Strobe, S.O.S. and Beacon Light
Powers and Times: 1000 Lumens (2.15h) -> 420 Lumens (5h) -> 200 Lumens (11h and 30min.) -> 50 Lumens (38h.) -> 1 Lumen (1200h.) -> Strobe -> Beacon -> SOS
Peak power: 67700 candles
Maximum lighting distance: 520m.
Lighting Method: Front Power Button
Light selection method: Front light selection button
Head and body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: included 1x rechargeable battery NL2150DW 3.7V 5000mAh; not compatible with different types of batteries
Measurements: 15.9cm (L) - 4.0cm (D barrel) - 4.0cm (D head)
Weight: 211g. - excluding batteries
Accessories: magnetic induction charging base - magnetic induction wall charging station - USB cable - cigarette lighter cable - mains transformer - spare o-ring - wrist strap
Waterproof: as per IP68 standard, submersible to 2m depth for 30min.
Impact resistance: it resists falls from 1m height

Power and duration certified in laboratory by standard ANSI/PLATO FL 1-2019 using 1x 21700 3.7V 5000mAh - under different conditions of use data may vary

KEY FEATURES
- Utilizes 9x high CRI LEDs (CRI≥90, color temperature of 4000-4500K)
- Integrates USB charge and discharge systems for use as a power bank
- USB-C input port compatible with QC fast charging systems
- 3 brightness levels and 2 special modes available
- Ability to select different lighting directions
- Plastic diffuser with maximum transparency to better distribute the light produced
- Recommended for use with 1 or 2 Li-ion 21700 batteries, also compatible with 18650 and CR123 sizes
- Automatic identification of the battery level and automatic selection of the best charging process
- Capable of activating over-discharged batteries if equipped with protection circuits
- Position indicator, so you can find where the flashlight is in the dark
- Energy efficient circuits capable of producing constant light for up to 150 hours continuously
- Magnetic base and hook to hang the flashlight, so you can use it in any environment and situation
- Water and dust resistant as per IP66 standard
- Resistant to impacts and falls up to a maximum of 1m. height

Led: 9x CRI >90 warm light diodes (4500K) with a life cycle of 50,000 hours and 360° lighting diameter
Operating Modes: 3 luminous powers, selectable with the dedicated button and 2 signaling modes
Powers and Durations: 280 Lumens (16h. ) -> 75 Lumens (32h.) -> 6 Lumens (150h.) -> S.O.S. -> Beacon Light
Peak Power: 54 candles
Maximum lighting distance: 28m diameter.
Luminsa power on and selection method: Double button power on, power off and selection
Body: ABS
Batteries: 1/2x 21700 from 3.7V (with positive pole protruding) - 1/2x 18650 from 3.7V or 2/4x CR123A from 3.0/3.7V (through adapters included)
Measurements: 12.9cm (H) - 6.0cm (W) - 3.2cm (D)
Weight: 136g. - excluding batteries
Accessories: USB/USB-C charging cable
Waterproof: IP66 standard, withstands strong water jets from all directions
Impact resistance: withstands falls from 1m height
Notes: Batteries are NOT included, they can be purchased separately - It's a torch/lantern, a powerbank and a battery charger. It allows you to recharge the batteries inside and to use them to charge external devices (smartphones etc.) like a powerbank - The base of the flashlight has an integrated hook to hang it - The base of the flashlight has an integrated magnet to anchor it to magnetic surfaces.

KEY FEATURES:

* Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
* Maximum light intensity of 63.500cd and maximum range of 504 meters
* Glasses and parables with anti-reflective, crystal coating and PDOT (Precision Digital Optics Technology) treatments
* Powered by a high capacity 21700 Li-ion battery and compatible with both 18650 and CR123 batteries to allow constant light for up to 1,500 hours.
* Tactical Mode and Daily Mode functions
* The rear power button and the metal side selection button control 5 different brightness levels and 3 special modes
* STROBE mode constantly changes frequency randomly, to maximize disorientation effects.
* Integrated potentiometer, with indicator light to indicate the remaining battery charge (Patent N ° ZL201220057767.4)
* The integrated potentiometer can also indicate the residual voltage of the inserted battery, with a minimum voltage deviation (± 0.1V)
* Charging ICs via USB-C port
* NITECORE 21700 (NL2150 5,000 mAh) rechargeable lithium-ion battery included
* Highly efficient electronic circuits that provide stable and continuous lighting
* ATR technology (Advanced Temperature Regulation) for temperature regulation (Patent N ° ZL201510534543.6)
* Electronic protection against battery polarity inversion
* Optical lenses with anti-scratch cover on both sides
* Constructed from solid aircraft-grade aluminum alloy
* Rugged HAIII type anodizing with military specification
* Submersible as per IP68 specifications (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL SPECIFICATIONS:
Led: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 5 light modes and 3 special modes, all electronically adjusted
Powers and Durations: 1800 Lumens (0.45h) -> 1050 Lumens (3.15h) -> 300 Lumens (7.15h) -> 50 Lumens (45h) -> 1 Lumens (1500h) -> Strobo -> Beacon -> S.O.S.
Peak power: 63500 candles
Maximum illumination distance: 504m.
Ignition method: Rear button with "Momentary On" system for light signals
Light selection method: Front button located under the head
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: (included): 1x 21700 3.6V NL2150 - also compatible with 1x 18650 Li-Ion 3.6 / 3.7V or 2x CR123 3.0 / 3.6 / 3.7V
Measurements: 15.7cm (L) - 2.54cm (D stem) - 4.0cm (D head) - 2.72cm (D tang)
Weight: 130.7g. without batteries
Accessories: wrist strap, ABS belt sheath, spare o-ring, clip, adapter for 18650 batteries, USB charging cable,
Water resistance: as per IP68 standard, submersible up to 2m. depth for 30min.
Impact resistance: withstands drops from 1m in height

Real powers and durations, certified in the laboratory by ANSI / PLATO FL1-2019 standards

The NITECORE NWE30 an emergency gadget with an innovative design. It is an ultra-compact electronic emergency whistle with an easily operated twist-and-buzz interface. Instead of the conventional whistle method, it aims to support the user in case of severe injury, hypothermia or weakness. The omnidirectional sound diffraction system allows the signal transmission in all directions. When activated, it will buzz every 10 seconds. Just loosen the tail cap to turn it on and tighten it to turn it off.
Using specially 4 x Luminus SST-20-W LED with a cylindrical PC diffuser, the NWE30 is able to emit a 360 ° flash of 2,000 lumens automatically at night or in the dark when activated in an emergency situation while hiking outdoors in the forest, in the cave or during the night trekking. From night to day, it will automatically turn off the flashing of the headlight to save energy and ensure sufficient autonomy.
Compact body weighing only 35g, constructed of aircraft grade aluminum alloy with military grade anodized finish

LED: 4x Luminus SST-20-W LED with a lifespan of 50,000 hours
Output: 360 ° beacon 2000 lumens (72h.)
Battery: included - 1x CR123A
Measurements: 6.7cm (L) x 2.5cm (D)
Weight: 73g. - batteries excluded
Body: T6061 aircraft aluminum
Finish: anodized, Type III
Notes: Submersible up to 2m depth, as per IP68 specifications

Led: Luminus SBT-90 GEN2 with a life cycle of 50,000 hours
Operating Modes: 4 light powers and 3 special modes electronically regulated
Powers and Durations: 5200 Lumens (1.30 * h.) -> 2000 Lumens (4h.) -> 800 Lumens (10h.) -> 200 Lumens (36h.) -> Strobo -> S.O.S. -> Beacon
Power peak: 562500 candles
Maximum illumination distance: 1500m. (1.5km)
Ignition method: Front multifunction button
Light selection method: Front multifunction button
Head: aeronautical aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: NBP68HD rechargeable battery pack (98Wh - 3.7V) rechargeable at 2A or 4A
Measurements: 27.6cm (L) - 5.0cm (D stem) - 9.0cm (D head)
Weight: 1361g. - with battery pack inserted
Accessories: Electric charger (3.5mm), Shoulder strap, Wrist strap, Spare O-ring, Spare plug for charging socket
Waterproofing: as per IP68 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1m in height
Notes: Integrated OLED display to view the type of mode selected, the residual voltage, the centigrade degrees of the LED and further information

The reported data were measured according to the international test standard ANSI / PLATO FL 1-2019 using the NBP68HD battery pack under laboratory conditions. The data may vary slightly in actual conditions of use due to usage habits and environmental factors. * The duration of the TURBO mode is tested without the temperature regulation system starting.

Headlamp designed only for NVG type hooks for helmets and tactical helmets equipped with this system. Designed mainly for military and soft air use or for tactical sector operators (police, firefighters etc.)

Powers and durations certified by ANSI / NEMA FL1 standards tested with 1x 18650 3.6V 3400mAh

LED: 1x Cree XM-L2 U2 with 50,000 hour life cycle
Main white light: 5 constant bright outputs, digitally regulated and selectable by pressing the appropriate switch mode button and 3 signals (police warning, S.O.S., location beacon)
Powers and durations: 1 lumen (680 h.) -> 38 lumens (25 h.) -> 210 lumens (7.15 h.) -> 420 lumens (2.30 h.) -> 1000 (1h.)
Auxiliary white light: 26 lumens (25h.)
Auxiliary red light: 11 Lumens (20h) -> Caution 11 Lumens (32h)
Range: up to 110mt.
Power peak: 3000 candles
Usable batteries: 1x 18650 3400mAh 3.7V (included in the package) or 2x CR123A 3.0 / 3.7V disposable or rechargeable
Torch dimensions: 82.7x50x46 mm. (with stand included)
Weight: 62.7g (without battery)
Lens: in hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Attachment: support compatible with NVG type helmet attachments
Notes: water resistant as per IP68 standard, submersible at 2mt. depth for 30min.
Included Accessories: 1x 18650 3.7V 3400mAh battery - USB / MicroUSB charging cable - front elastic strap - spare o-ring
Integrated Charging System: through the integrated MicroUSB port - protected by an insulated cover - and using the Micro-USB cable supplied as standard, it is possible to recharge the supplied battery, the operation can be monitored thanks to a special bright LED located next to it under the luminous selection buttons. The charging cable can be attached to any PC with a USB port or to any wall power supply or from a cigarette lighter with a USB port.

WHY CHOOSE IT:

Hunting / scouting use - Remarkable illumination depth 618m - Convenient charging system integrated in the battery - High autonomy thanks to the new 5000 mAh 21700 battery - Practicality and immediacy of the light selection controls.

KEY FEATURES:

* Italian Guarantee Nitecore Italy: Torch guaranteed 5 years - Battery guaranteed 12 months
* Charging system integrated in the Li-ion battery via Micro-USB port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Use a Cree XP-L HI V3 for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with anodized military specifications
* IP68 waterproof and submersible (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7 3400mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically adjusted + Strobo, S.O.S. and Beacon
Power and Durability: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Peak power: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear Button
Bright selection method: Front Button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: 21700 with micro-usb direct charging included in the package - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head)
Weight: 158g. - batteries excluded
Accessories: clip, wrist strap, belt cordura sheath, spare o-ring, anti-roll ring
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1.5m in height

HUNTING KIT

the set includes:

- Nitecore NEW P30 torch

- RSW3 remote connection

- Magnetic attack

Technical data of the torch

KEY FEATURES:

* Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months
* Charging system integrated in the Li-ion batteries via USB Type C port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Uses a Cree XP-L HI V3 LED for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 21700 3.6V 5000mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated + Strobe, S.O.S. and Beacon
Powers and Durations: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Power peak: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear button
Light selection method: Front button
Head: aviation aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: included 1x 21700 with USB Type C direct charging - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head) - 2.72 (D. tail)
Weight: 158g. - batteries excluded
Accessories included: Clip, Wrist strap, Spare O-ring, Spare back button, Adapter for 18650 / CR123 batteries, Sheath
Waterproofing: as per IPX-8 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1.5m in height

Key Features

It uses 6 LED CREE XHP35 HD LEDs to produce a maximum brightness of 10,000 lumens
Maximum light intensity of 20,000 candles and lighting up to 288 meters
Made with a monoblock body machined with numerical control so as to be light, sturdy and to better dissipate the heat generated.
Multi-function OLED display for real-time information on Lumens, voltage, LED temperature and remaining battery time.
Built-in rechargeable, non-removable, Li-ion, type 21700 from 4,800mAh.
Intelligent charging ICs to better manage the battery.
High efficiency circuits to allow a constant light up to a maximum of 200 continuous hours.
It can be controlled by two separate buttons for switching on and for selecting the various operating modes and the 5 levels of light intensity. Additional button on the shank.
High brightness level programmable according to your needs (between 400 and 2000 lumens)
Glass and parabolas with anti-reflection treatment, crystal coating and PDOT (Precision Digital Optics Technology).
Made of aeronautical aluminum alloy.
Abrasion resistant ANOD III anodization with military specifications.
Immersible as per IP68 specifications (up to 2m depth for 30min).
Resistant to impacts and falls up to a maximum of 1m. of height.
Possibility to be positioned vertically, like a candle.

--------------------------------------------------------------------------------------

powers and durations certified in the laboratory by ANSI / NEMA FL1 standards - in different conditions of use or using different batteries, data may vary

Led: 6x Cree XHP-35 HI with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated light powers
Powers and Durations with IMR battery (included): 10000 Lumens (-) -> 1000 Lumens (2h.) -> 300 Lumens (7h.) -> 100 Lumens (14h.) -> 5 Lumens (200h.) -> Strobe -> SOS -> Beacon
Peak of power: 20000 candles
Maximum illumination distance: 288m.
Ignition method: Rear button or multi-function front button
Light selection method: Multi-function front button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finishing: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective coating
Battery: rechargeable, integrated, non-removable - 1x IMR21700 3.6V 4800mAh
Measurements: 11cm (L) - 4.1cm (L stem) - 3.1cm (S stem)
Weight: 246.5g. - batteries not included
Accessories: wrist strap, nylon sheath, charging cable, removable clip (already mounted on the torch)
Waterproofing: as per standard IP68, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1m in height
Notes: Integrated OLED display to display the selected mode type, residual voltage, degrees Celsius and further information - The flashlight has an integrated charging system via USB Type C cable

It has a magnetic bottom to attach it everywhere and works like a lipstick / lip gloss: turn the lower part and the "salt" diffuser cone expanding the light beam. Ideal to keep in the car for emergencies or to use during excursions or overnight stays in tents.

LED: 1x Cree XP-L HD V6 with a life cycle of 50,000 hours
Output: 1000 lumens (1h.) -> 230 lumens (6h.) -> 60 lumens (24h.) -> 1 lumen (900h.) -> beacon
Lighting distance: 166m.
Power peak: 6900cd
Battery: sold separately - 1x 18650 3.6 / 3.7V or 2x CR123 3.0 / 3.7C Li-ion battery
Measurements: 10.6cm (L) x 2.69cm (D)
Weight: 78.5g. - batteries not included
Head: T6061 aeronautical aluminum and plastic diffuser
Body: aeronautical aluminum T6061
Finishing: anodized, Type III
Lens: hardened glass with anti-reflective coating
Accessories: wrist strap and spare o-ring
Notes: Magnetic back - Immersible up to 2m depth, as per IPX-8 specifications