Machetes and Bowie Knives for Sale: Quality Blades for Every Need

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Coyote Tan Idroglider
Handle: Forprene
Blade length: 180mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: Advanced to 2.5cm. the branch of guard
Weight: 352g.
Closure: -
Clip: -
Sheath: Nylon compatible M.O.L.L.E.
Packaging: cardboard box with Fox logos
Notes: Survival Kit in aluminum box sealed, with its MOLLE compatible nylon sheath

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Saw wire
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* pencil

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED AND USED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: In excellent mechanical condition; in acceptable cosmetic condition
* Commercially available: Available on the market
* Sharpening: Professionally resharpened
* Marks on blade: Various signs of use and oxidation, which do not compromise its cutting performance, mechanical capabilities, or reliability
* Marks on handle: Minimal signs of use
* Box: -
* Sheath: Included, in excellent condition
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

A reliable and sturdy chopper, previously heavily used, showing various scuffs and signs of oxidation that give it aesthetic “character” without compromising its cutting performance or mechanical integrity. Excellent for those seeking a reliable hiking companion that offers great durability at a fraction of the original price.

Intended Use: Heavy Utility

Manufacturing Type: Semi-Industrial
Country of Manufacture: USA
Blade: Full tang, 1095 steel, 58/60 HRC
Blade Finish: Black River Wash
Handle: Tan Canvas Micarta
Blade Length: 213 mm.
Blade thickness: 4.5 mm.
Overall length: 353 mm.
Balance: Forward
Weight: 510 g.
Sheath: Nylon, with ABS insert and multifunctional outer pocket
Packaging: -
Notes:  Previously owned and used knife from a private collection—Designed by Andy Tran

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition, with a few minor signs of wear on the guard and pommel
* Commercial Availability: Discontinued in this configuration (current versions feature different steels, blade shapes, and lengths)
* Sharpness: Original, could be sharpened
* Marks on the blade: Several small superficial scratches on the blade finish and the spine of the knife, as shown in the images. Minor signs of oxidation near Harsey’s signature.
* Marks on the handle: None
* Box: Missing
* Sheath: Present and in excellent condition
* Manuals, Certificates, and Warranties: None
* Inspected and certified by our in-house laboratory

The Chris Reeve Knives Green Beret Fighter 5.5" is a professional fixed-blade knife designed to offer the ultimate balance between durability, control, and reliability. Crafted to the high manufacturing standards that distinguish Chris Reeve Knives, it was created as an operational tool capable of delivering consistent performance even under the most demanding conditions.

The 5.5-inch CPM-S30V steel blade combines excellent mechanical strength with superior edge retention. The bayonet grind profile is engineered to deliver precision and penetration, while the knife’s overall balance ensures safe and natural control during use.

The handle, featuring contoured Canvas Micarta scales, provides an ergonomic and stable grip, adapting well even to use with gloves or in harsh environments. The texture and shape of the scales allow for comfortable and safe handling, maintaining excellent control of the knife.

Intended Use: Collectible / All-Round Utility / Fighter

Manufacturing Type: Midtech
Blade: CPM-S30V stainless steel with CeraKote surface treatment
Country of Manufacture: Boise, Idaho, USA
Handle: Black Canvas Micarta
Blade Length: 140 mm
Blade Thickness: 5.5 mm
Overall length: 278 mm.
Balance: on the lower guard
Weight: 320 g.
Sheath: BlackHawk! nylon, with Kydex lining and front pocket with Velcro. Suitable for both belt carry and M.O.L.L.E. compatibility.
Notes: Previously purchased knife—from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with a few minor signs of age on the guard and pommel
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: None
* Marks on handle: A few minor signs of age on the guard and pommel
* Box: Included
* Sheath: Included and like new
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Fallkniven SK6L Krut represents the perfect blend of Scandinavian tradition and modern high-end knife craftsmanship. Inspired by the great work knives of the Swedish forests, it is designed to confidently tackle the most demanding outdoor activities, from hunting to bushcraft, without sacrificing its signature Nordic elegance.

Its sturdy construction, handle made of fine figured birch, and CoS cobalt-laminated steel blade with a convex grind offer an ideal balance between strength, cutting performance, and edge retention. Rounding out the package is a high-quality leather sheath, designed to ensure safe transport and quick access to the knife.

“Krut,” an old nickname given to Swedish soldiers about two centuries ago and meaning “gunpowder,” evokes the rugged and reliable spirit of this model: a knife designed to accompany the user on any adventure, built to last a lifetime.

Intended Use: Hunting / Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: Hidden tang made of laminated stainless steel (SanMai) CoS at 60 HRC
Blade Finish: Satin
Handle: Figured birch wood with a through-guard and nickel silver pommel
Blade Length: 160 mm.
Blade thickness: 6 mm.
Overall length: 280 mm.
Weight: 268 g.
Sheath: Leather, belt-mounted, for vertical carry
Packaging: Cardboard box with manufacturer’s logos
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued with this steel; currently available with VG7 laminated steel
* Sharpness: Factory-sharpened, could be improved
* Marks on the blade: Some minor signs of oxidation and a few barely noticeable marks, visible when held up to the light
* Marks on the handle: A few marks on the guard and the pommel
* Box: Included
* Sheath: Included, in excellent condition
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The NL3 model takes its name from Njord, the Norse god of fertility, sailors, and fishermen, a member of the Vanir clan and lord of the coasts and beaches. Just like the deity who inspired it, this knife embodies strength, balance, and reliability, standing out as one of the most fascinating and versatile tools in the prestigious Northern Light Series.

Designed without compromise, the NL3 Njord combines exceptional performance, the highest-quality materials, and a refined design, offering a unique user experience for both enthusiasts and professionals. At the heart of its extraordinary robustness lies the VG10 laminated steel blade—an advanced technological solution that guarantees strength, edge retention, and reliability even under the most demanding conditions.

Every detail of the Northern Light Series has been carefully crafted to create a strong, elegant, and comfortable knife that meets the highest standards. The NL3 Njord is not just a working tool: it is a knife that captivates at first glance and evokes genuine emotion every time it is held.

Intended Use: Hunting / Sports

Blade: hidden tang made of San-Mai laminated stainless steel (VG-10 and 420J2) at 59 HRC with a convex grind
Handle: oxhide leather rings, 420J2 steel guard, and aluminum pommel
Blade length: 150 mm.
Blade thickness: 6 mm.
Overall length: 268 mm.
Balance: forward
Weight: 266 g.
Sheath: high-quality leather for vertical belt carry
Notes: Previously purchased knife, from a private collection

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: acquired from a private individual, previously purchased
* Condition: excellent, no marks on the blade or handle, only a few minor signs of wear on the Kydex sheath
* Available on the market: still available, though with a different handle and finish
* Sharpening: factory-sharpened
* Marks on blade: none
* Marks on handle: none
* Box: not included (TOPS models are sold without a box)
* Sheath: included, with some minor signs of wear
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The Tops Tom Brown Tracker is a knife that has been appreciated by survival enthusiasts for many years and is designed to handle any outdoor situation. Featuring a full-tang blade with a distinctive multi-section profile—ideal for cutting, carving, splitting, and skinning—it offers exceptional versatility. Crafted from 1095 carbon steel with a protective coating and an ergonomic Micarta handle, the Tracker combines strength, control, and reliability, making it an iconic tool for survivalists and bushcrafters.

Intended Use: Sports / Collectible

Production Type: Industrial
Blade: 1095 carbon steel 58HRC with “Black Traction Coating”
Handle: Micarta
Blade Length: 160mm.
Blade Thickness: 6.5mm.
Overall Length: 302mm.
Balance: at the lower guard
Weight: 595g.
Sheath: thermoformed Kydex, with dual multi-position clip
Notes: Designed by Tom Brown, featured in the film The Hunted starring Benicio Del Toro—entirely made in the USA—each knife is numbered.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: withdrawn from a private collection, previously purchased
* Condition: excellent, little use and not heavy use
* Available on the market: still available, although with a different handle
* Sharpness: factory sharp, little wear
* Marks on blade: minimal marks on blade treatment that do not compromise its use in any way
* Marks on handle: minimal signs of use
* Box: not present, as with most Tops models
* Sheath: present, with minimal signs of wear
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The Tops Tom Brown Tracker is a knife that has been appreciated by survival enthusiasts for many years and is designed to handle any outdoor situation. Featuring a full tang blade with a distinctive multi-section profile—ideal for cutting, carving, splitting, and skinning—it offers exceptional versatility. Made of 1095 carbon steel with a protective coating and ergonomic Micarta handle, the Tracker combines strength, control, and reliability, making it an iconic tool for survivalists and bushcrafters.

Intended use: Sports / Collection

Type of production: industrial
Blade: 1095 carbon steel 58HRC with “Black Traction Coating” (anti-reflective/non-slip)
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 302 mm.
Balance: at the lower guard branch
Weight: 595 g. (744 g. including sheath)
Sheath: Kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private collection, previously purchased, WITHOUT BOX

• Condition: good overall condition, never used

• Available on the market: still in production

• Sharpness: factory sharp

• Marks on blade: signs of slight surface oxidation on part of the blade as shown in the photos

• Marks on handle: none

• Box: -

• Sheath: in good overall condition

• Manuals, certificates and warranties: -

• Checked and certified by our in-house laboratory

The Cold Steel 1917 echoes the style of early 20th century military knives, particularly the Bowie and navy models used during the First World War. The design combines classic lines and modern materials, offering a wide, balanced blade ideal for powerful cuts and heavy-duty work. The hardwood handle and steel guard evoke the aesthetics of 1917 service weapons, reinterpreted with Cold Steel's usual robustness.

Use: Sporting / Collectible

Type of production: semi-handcrafted
Blade production: India
Blade: 1085 High Carbon steel
Blade treatment: burnishing
Handle: rosewood
Blade length: 305mm.
Blade thickness: 6.2mm.
Overall length: 440mm.
Balance: rear
Weight: 658g.
Sheath: leather and metal
Packaging: -
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: acquired from a private collector, previously purchased
* Condition: good, unused
* Availability: still available on the market, in a different version
* Sharpening: factory edge, excellent condition
* Blade marks: some near the handle, likely caused by contact with the sheath
* Handle marks: none
* Box: not included, as with most Tops models
* Sheath: included, with a superficial cut (see photos) near the snap button
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

The Silent Hero was designed by Anton Du Plessis, then Head of Operations for the Silent Heroes Foundation Special Interdiction Unit, whose mission was to fight poaching in South Africa. This knife needed to be durable, versatile, and able to withstand field use — requirements that shaped the design of both the blade and the handle. It is built to handle heavy-duty tasks.

The ergonomic handle ensures a secure grip. The hole in the lower guard branch can be used to attach the knife to a stick or pole when needed.

The blade features a finger choil that allows for a firm grip and precise control for detailed cuts. Its recurved tip design makes the knife ideal for slicing while providing extra tip strength. This makes it perfect for bushcraft, survival, and tactical applications.

The black leather sheath is robust and complements the knife perfectly.

Intended use: Sport / Collection

Production type: industrial
Blade: 1095 carbon steel 58HRC with “Sniper Gray” finish
Handle: Micarta
Blade length: 160mm
Blade thickness: 4.8mm
Total length: 294mm
Balance: aligned with the guard branch
Weight: 321g (439g with sheath)
Sheath: leather
Notes: each knife is individually serialized

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: acquired from a private collector, previously purchased
* Condition: good, lightly used and not heavily worn
* Availability: still available on the market, though with a different handle version
* Sharpening: factory edge, slightly worn
* Blade marks: none on the treated area, slight oxidation spots on the edge
* Handle marks: none
* Box: not included, as with most Tops models
* Sheath: included, with friction marks on the Kydex and oxidation on the metal clips
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

The Tops Tom Brown Tracker is a survival knife highly appreciated for many years by outdoor enthusiasts, designed to tackle any wilderness challenge. Featuring a full tang blade with a distinctive multi-section profile — ideal for cutting, carving, chopping and skinning — it delivers outstanding versatility. Made of 1095 carbon steel with a protective coating and an ergonomic Micarta handle, the Tracker combines strength, control, and reliability, making it an iconic tool for survivalists and bushcrafters.

Intended use: Sport / Collection

Production type: industrial
Blade: 1095 carbon steel 58HRC with “Black Traction Coating” (anti-glare / anti-slip)
Handle: Micarta
Blade length: 160mm
Blade thickness: 6.5mm
Total length: 302mm
Balance: aligned with lower guard branch
Weight: 595g (744g with sheath)
Sheath: tactical Kydex with dual multiposition clip
Notes: Design by Tom Brown, featured in the film “The Hunted” with Benicio Del Toro, handmade in the USA, each knife individually numbered.

KNIFE FROM PRIVATE COLLECTION
* Type: Previously purchased, from a private collection
* Condition: As new
* Availability: Rare 1980s/90s bowie, discontinued and no longer available
* Sharpening: Factory edge
* Blade marks: -
* Handle marks: -
* Box: Present, with green foam interior
* Sheath: Present, in excellent condition
* Manuals, Certificates, and Warranty: -
* Inspected and certified by our in-house workshop

The Puma Skinmaster 11 6010 with stag horn handle is a premium hunting knife, forged from a single block of 1.4116 steel according to the renowned Solingen tradition. Designed for skinning, it offers a perfect balance between strength and handling. The thick, short blade ensures precision and durability, while the genuine stag horn handle adds elegance and excellent ergonomics. Each piece is unique, with natural grain patterns that make it both a working tool and a collector’s item. Equipped with a high-quality leather sheath, the Puma Skinmaster is the ideal companion for demanding hunters and for those seeking a knife that can face any outdoor challenge with style and reliability.

Intended use: Skinning / hunting
Production type: Fully forged (integral) from a single piece of steel
Country of origin: Germany (Solingen)
Blade: 1.4116 stainless steel (DIN WN 1.4116), hardness 55–57 HRC
Blade finish: Satin
Handle: Stag horn
Blade length: 93 mm
Blade thickness: 5 mm
Overall length: 204 mm
Weight: 240 g
Package: Leather sheath; wooden box
Notes: Each handle is unique thanks to the natural grain of stag horn; a balanced, durable knife ideal for intensive use

KNIFE FROM A PRIVATE COLLECTION
* Type: Previously purchased knife from a private collection
* Condition: Like new
* Availability: Rare and hard to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Original
* Sheath: In excellent, complete condition
* Manuals, Certificates & Warranty: Ka-Bar
Inspected and certified by our in-house laboratory

The KA-BAR BK72 represents the ultimate evolution of a survival knife icon. As the heir to the famous Becker BK2/BK22, it retains their toughness and reliability while enhancing performance thanks to the premium CPM S35VN steel. Built full tang with a 6.35 mm thick blade, it offers outstanding strength and optimal handling.

The black micarta handle ensures a firm grip in any condition, while the available finishes — stonewashed or black DLC coating — provide a modern and functional aesthetic. A knife that combines durability, precision, and style, perfect for outdoor, survival, and professional use.

Intended use: survival / outdoor / heavy-duty
Production type: exclusive Knivesandtools edition (KA-BAR–Knivesandtools collaboration)
Country of origin: USA
Blade: CPM S35VN steel (full tang, 6.35 mm thick)
Blade finish: stonewashed (KABK72) or black DLC coating (KABK72BK)
Handle: black micarta
Blade length: approx. 13.2 cm
Blade thickness: 6.35 mm
Closed length: 107 mm
Overall length: approx. 270 mm
Closed thickness: estimated between 12–15 mm
Weight: approx. 435 g
Locking mechanism: fixed blade, no locking system
Clip: none (includes kydex sheath)
Packaging: original box
Notes: hardness approx. 58 HRC

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Iconic knife handmade in 2021, withdrawn from a private collection, previously purchased
* Condition: in excellent condition, unused and kept solely in a collection
* Available on the market: Currently out of catalog and cannot be ordered/obtained from the craftsman
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: in excellent condition, with signature and date of manufacture
* Manuals, Certificates, and Guarantees: Certificate of guarantee and authenticity with date and technical data of the model
* Checked and certified by our in-house laboratory

THE LEGEND
Jimmy Lile (1933–1991), known as “The Arkansas Knifesmith,” was one of the most important American knife makers of the 20th century. Born in Russellville, Arkansas, he made his first knife at the age of 11 and devoted himself professionally to knife making in 1971.

He is famous for the legendary Rambo knives, designed for real use with 440C blades, hollow handles, and innovative details. He was president of the Knifemakers' Guild, and his works were commissioned by presidents and celebrities.

He died in 1991, leaving a legacy of the highest caliber in custom and collectible knives.

THE PRESENT
Today, the Lile Knives, LLC brand is owned by John Hill of McKinney, Texas. In the 1980s, John was already collaborating with Bob Rankin on the sale of original Rambo knives, and in 2003 he co-authored a book dedicated to Lile's work.

After Jimmy's death, John maintained a strong relationship with Marilyn (Lile) Miller and purchased the Lile brand from her to continue producing high-quality replicas of the movie knives, adhering to custom knife standards and guaranteeing Marilyn royalties.

Since 2011, John Hill has been collaborating with Vaughn Neeley, former owner of Timberline Knives, to produce limited editions of Rambo knives that are prized by collectors. Today, Vaughn produces the entire new “Cerakote™ Series,” while the “Utility Series” is produced under his supervision, keeping alive the tradition and quality of Jimmy Lile's original models.

THE KNIFE
“The Mission” is one of the most iconic survival knives ever made, born from Jimmy Lile's vision to combine extreme functionality and military design.

Featuring a stainless steel blade finished entirely with bead-blasting to eliminate reflections, this model combines tactical aesthetics and real performance.

The back is equipped with aggressive serrations, while the hollow handle, wrapped in paracord, integrates a compass and allows for the transport of small tools.

The multifunction guard features screwdriver tips, making it a complete survival tool. Produced in a limited edition, “The Mission” represents the perfect synthesis between a combat knife, field tool, and collector's item.

Intended use: Collection / Survival

Type of production: entirely handmade
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Titanium Grey Cerakote
Handle: 316 stainless steel, hollow, waterproof, paracord coated; 316 stainless steel through guard; screw-in aluminum tang with integrated glass breaker and Pyser Optics NATO internal compass
Blade length: 253mm.
Blade thickness: 7 mm.
Total length: 393 mm.
Weight: 573 g.
Sheath: black leather, belt-mounted, for vertical carry, with craftsman's signature and date of manufacture
Packaging: supplied with warranty certificate with date of manufacture and technical details
Notes: iconic knife used in the Rambo films, entirely handmade, with LILE logos and serial number. Previously purchased, never used, from a private collection

Trail Master in CPM 3V steel – The ultimate evolution of an outdoor classic

There is no better companion for outdoor adventures than the legendary Trail Master, now available in an even more durable version made of CPM 3V steel. Featuring a powerful 9.5-inch clip point blade with an unusually sturdy tip for this type of profile, it is designed to withstand wear, abuse, and extreme stress without batting an eye.

CPM 3V steel guarantees incredible cutting ability and exceptional edge retention, surprising even the most experienced users. A blade like this takes time, skill, and resources to produce — take advantage of it while it's available.

Intended use: Hunting / Utility

Type of production: industrial
Country of production: Taiwan
Blade: CPM-3V carbon steel
Blade treatment: Satin finish
Handle: Kray-Ex (Kraton) with through guard
Blade length: 239mm.
Blade thickness: 7.7mm.
Total length: 370mm.
Balance: advanced
Weight: 478g.
Sheath: Secur-Ex thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, from a private collection.
* Condition: in very good condition, never actually used, with slight signs of time
* Commercially available rare bowie from the 70s/80s discontinued and no longer available
* Sharpening: Factory.
* Marks on blade: A few small marks due to time.
* Marks on handle: A few small marks due to time
* Box: Present, but lacking the green foam inner liners, which have deteriorated over time
* Scabbard: Present, in very good condition, marked “Western Germany”
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Puma 6356 Original Bowie - A Unique Collector's Knife

The Puma 12 6356 is a remarkable vintage hunting knife known for its sturdiness, quality workmanship and excellent durability. Made in Germany from Pumaster steel, a high-performance alloy steel, this knife offers an ideal combination of hardness, wear resistance, and reliability. Pumaster approaches the performance of modern steels such as D2, with a similar composition that includes good carbon and chromium content. Although it does not reach the hardness of modern ultra-high performance steels, Pumaster is still able to maintain an exceptional edge over the long term, showing superior corrosion resistance compared to pure carbon steels such as 1095 or C75.

With a blade measuring nearly 10 inches long and an overall length of more than 15 inches, the Puma 12 6356 is an imposing knife that does not go unnoticed. Its nickel silver through-guard and rosewood handle give the knife a sophisticated look, while the quality of its craftsmanship ensures durable performance. 

This specimen, which appears to have never been used, is in excellent condition and is complete with its original box and leather sheath - special feature of the latter is that it is still marked “Western Germany,” which dates it pre-1986.

It is an ideal choice for any collector. Not only a high-quality hunting knife, but a true collector's item for fans of vintage Puma items.

Intended Use: Collectible / Vintage / Hunting

Type of production: Handcrafted
Country of manufacture: West Germany (pre-1986)
Blade: integral, Pumaster steel (a tool steel very simle to today's D2)
Blade finish: mirror polish
Handle: nickel silver through-guard and Rosewood riveted handle
Blade length: 255m.
Blade thickness: 5.5mm.
Total length: 386mm.
Balance: advanced
Weight: 555g.
Sheath: leather
Packaging: wooden case, lacking interior linings (deteriorated with time)
Notes: rare Vintage knife late 1970s, early 1980s - previously purchased, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Used, overall in good condition, with cosmetic signs of wear and tear on the blade that in no way compromise its concrete use
* Commercially available Out of production.
* Sharpening: Re-sharpened
* Marks on blade: Many cosmetic scratches from use that do not compromise its use
* Marks on handle: Small marks on handle screws from disassembly of parts.
* Box: Not present
* Scabbard: Present, original, complete with all its parts, in very good condition.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory.

WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Sand G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, made of Kydex with multi-position Keyblock attachment
Packaging: without original packaging
Notes: designed by Paolo Bozzo - discontinued knife, withdrawn from a private collection, previously purchased and used, but in good condition

WITHDRAWN FROM A PRIVATE COLLECTION

• Type: Previously Purchased
• Condition: In excellent condition
• Market Availability: First version with leather sheath
• Factory Sharpened: Yes
• Blade Marks: None
• Handle Marks: None
• Packaging: Complete, cardboard box with manufacturer logos
• Sheath: Leather
• Manuals, Certificates, and Warranties: Warranty certificates
• Checked and Certified: By our internal laboratory

Intended Use: Roasting

• Production Type: Industrial
• Blade Production: Italy
• Blade: N690Co stainless steel, hardened to 58HRC
• Blade Treatment: Satin finish
• Handle: Forprene
• Blade Length: 300mm
• Blade Thickness: 6.5mm at the handle, 4mm on the blade
• Total Length: 433mm
• Weight: 336g
• Sheath: Black leather
• Packaging: Cardboard box with Extrema Ratio logos
• Note: Also suitable as a sports or collectible knife

Extrema Ratio has applied its rigorous military standards to a series of professional kitchen knives.

The blade is made of tested BOHLER N690 steel, enriched with chromium, vanadium, molybdenum, and cobalt, hardened to 58HRC. The handle is made of Forprene, an elastomer that meets NATO standards for resistance to extreme conditions and is fully removable from the blade, allowing for thorough cleaning and maintenance.

Each knife comes with its own sheath, also derived from military equipment. While not designed to meet hygiene regulations, it ensures safe transport of the extremely sharp blade and protects it from impacts that could reduce its efficiency. We recommend using the sheath only for transportation and long-term storage.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 6.5” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with carbon steel through-guard
Blade length: 165mm.
Blade thickness: 6mm.
Total length: 283mm.
Balance: advanced
Weight: 600g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Never used, absolutely like new
* Commercially available: Still in production, hard to find
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Marketed by manufacturer without a box
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

This replica of Major Von Tempsky's 11” Bowie knife is inspired by the design of the knife he created and assigned to his company of Forest Rangers in 1863.

Gustavus Ferdinand von Tempsky (1828-1868) was a German-born adventurer, soldier and artist, known for his role in the New Zealand Wars and for his leadership among the Forest Rangers. His adventurous life and courage made him a legendary figure, particularly in the context of battles between European settlers and Māori peoples.

He learned the advantages of Bowie knife fighting in California during his stint as a prospector, where he had acquired an excellent American-made knife; once he arrived in New Zealand and found himself in charge of Forest Ranger Company No. 2 with the rank of major, he had about 30 Bowie knives made for his men according to his personal design by a blacksmith in Shortland St. Auckland. The Forest Rangers were an elite corps of mounted scouts employed by the colonial government between August 1863 and October 1867 during the New Zealand Wars.

At the time, knives were made of wagon spring steel, one of the few steels available to blacksmiths in Auckland in 1863, and Von Tempsky, an experienced fighter, taught his men the use of the Bowie knife in hand-to-hand combat. The knife was used to defend against enemy blows while a pistol was usually held in the other hand.

In addition to combat, Bowie knives were used to open paths in the forest, dig defensive positions, cut firewood, and for general use while camping.

Use: Heavy Duty / Collection

Type of production: Handcrafted
Country of manufacture: New Zealand
Blade: full tang made of 8670 spring steel, high carbon content
Blade Finish: Direct heat treatment, which goes to create special color play on the blade
Handle: Wenge wood with S-shaped carbon steel through-guard
Blade length: 280mm.
Blade thickness: 7mm.
Total length: 425mm.
Balance: advanced
Weight: 925g.
Sheath: leather
Packaging: unwrapped, sold certificate of warranty and authenticity
Notes: previously purchased knife, never used, from a private collection

The name "Mato Grosso," comes from Portuguese and means "dense bush," recalling the South American region of the same name. This machete is specially designed to cut through the dense vegetation of tropical forests due to its long, narrow blade. It can be used to cut tall, dense grass, thin vegetation, cut branches and open paths in the most inaccessible forests.

Its forprene handle makes it easy to use. The drop blade, milled from Böhler N690 steel hardened to 58 HRC for the best balance of edge hold and strength, is 309 mm long, 4 mm thick and has a flat edge.

Mato Grosso comes with a black Cordura sheath equipped with an M.O.L.L.E. system that allows it to be carried on tactical vests and belts.

Intended Use: Chopper / Machete

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 54HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 280mm.
Blade thickness: 4mm.
Total length: 450mm.
Weight: 370g.
Sheath: Nylon with belt and M.O.L.L.E. type attachments.
Packaging: cardboard box with Extrema Ratio logos
Notes: Designed and conceived to cut through the dense broadleaf vegetation typical of tropical and rainforests.

A well-motivated classic. The "kukri," the Nepalese multi-purpose tool made famous by Rgt. Gurka, in the service of His Britannic Majesty and derived from ancient Greek falcate swords.

The blade of this machete has differentiated roundings. Near the handle the blade is razor rounded so that a narrow sharpening angle can be achieved without unduly affecting the thickness of the back material, which must remain solid. The rounding at the end of the blade, on the other hand, is flat and well angled so as to effortlessly penetrate wood and vegetation.

Usually these kinds of tools are made of soft steel to be more elastic and more easily resharpened. Extrema Ratio has succeeded in obtaining an elastic tool with a decidedly long-lived and durable sharpening by using instead a hard steel such as BÖHLER N690. This machete comes with a thigh scabbard with black Cordura storage pocket and safety carry strap.

Intended Use: Tactical/Military

Blade: N690Co 58HRC stainless steel
Handle: Kraton
Blade length: 340mm.
Blade thickness: 6.3mm.
Blade finish: satin finish
Total length: 493mm.
Balance: advanced
Weight: 650g.
Sheath: Tactical, Nylon, thigh-high