american pride

The knife from Rambo: First Blood, the first installment in the series, is one of the most famous examples of a modern survival knife. Designed by master knife maker Jimmy Lile at the specific request of Sylvester Stallone, it was not intended as a simple prop, but as a real, functional and useful tool in an extreme survival context.

In the film, John Rambo is a former Green Beret veteran of Vietnam, an expert in guerrilla warfare and environmental adaptation. The knife becomes a symbol of his self-sufficiency: a sturdy blade, a serrated back for cutting wood and thin metal, a hollow handle with a waterproof seal to hold a small emergency kit (matches, string, hooks), and a flat pommel that can be used as a hammer or mallet. A sharpening stone was also integrated into the sheath, highlighting the philosophy of “don't depend on anything other than what you carry with you.”

The design of the Rambo 1 knife anticipates the myth of the lone hero capable of surviving against nature and man, and defines an aesthetic that would influence the production of survival knives for the entire following decade. Even today, the original Lile models are considered highly collectible items, testimony to the union between cinema and true knife-making artistry.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and gray coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.).
Blade length: 225mm.
Blade thickness: 5mm.
Handle length: 105 mm.
Total length: 349 mm.
Balance: Forward, 21 mm from the lower guard branch.
Weight: 418 g.
Sheath: Leather, with sharpening stone.
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

PREVIOUSLY PURCHASED AND USED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased and used
* Condition: Good overall condition, with evident signs of age and use
* Commercial availability: Discontinued
* Sharpening: Resharpened
* Marks on blade: Present, with scratches, abrasions and surface dulling consistent with age and use
* Marks on handle: Present, with natural patina and signs of use on the stacked leather washers
* Box: -
* Sheath: Present, original leather sheath, heavily used and showing signs of age
* Manuals, Certificates and Warranties: -
* Inspected and Certified by our in-house laboratory

The SOG S1 Bowie Vietnam 5th Special Forces Group is one of the most representative knives in the history of SOG Specialty Knives and the model with which the American brand began its production during the second half of the 1980s. Made in Seki, Japan, the S1 was created as a tribute to the famous knives used by members of the Military Assistance Command, Vietnam – Studies and Observations Group (MACV-SOG) during the Vietnam War.

It is important to distinguish the S1 from the original “sterile” military knives actually used operationally during the conflict: the commercial SOG model instead reproduces the commemorative configuration of the famous MACV-SOG Bowie, featuring the U.S. Army Special Forces crest on the blade together with the marking “VIETNAM 5th SPECIAL FORCES GROUP”. This strong historical identity, combined with the quality of Japanese manufacturing, has made it one of the most recognizable and sought-after vintage SOG knives among collectors.

Production was entrusted to Ichiro Hattori in Seki, one of the most important names in Japanese knifemaking. The substantial Bowie blade is made from SK-5 carbon steel, hardened to approximately 57-58 HRC, with the characteristic dark gun-blue finish combined with polished surfaces. The handle uses traditional stacked leather washers stabilized with epoxy resin, completed by a sturdy metal guard and pommel.

This example features the classic SOG Specialty Knives logo on one side of the ricasso and, on the opposite side, the markings “SEKI-JAPAN”, the Special Forces crest and the inscription “VIETNAM 5th SPECIAL FORCES GROUP”. It is also accompanied by its original black leather sheath, complete with sharpening stone pocket and a large Special Forces crest embossed on the lower section. The original period identification label is still present on the back of the sheath.

The example offered here comes from a private collection and has actually been used. The blade shows scratches, abrasions and surface marks, both on the blued and polished areas; the leather handle has developed a noticeable patina and shows wear consistent with its age. The original sheath is also heavily used, with leather wear, marks and widespread abrasions. Its condition should therefore be considered good in relation to its age and nature, but it should not be compared with a display-grade or NOS example.

These very characteristics tell the story of an authentic SOG S1 made in Seki: a knife that, regardless of its cosmetic condition, retains all the appeal of one of the founding models of the brand and today represents a particularly significant piece for a collection dedicated to American military knives and Japanese SOG production from the 1980s and 1990s.

Intended use: Military / Collection
Production type: Industrial
Model: S1 Bowie - Vietnam 5th Special Forces Group
Country of manufacture: Seki - Japan
Model production period: 1986 - 2005
Blade: SK-5 carbon steel
Hardness: 57-58 HRC
Blade finish: Gun-blue / polished
Blade profile: Bowie
Edge: Plain
Handle: Stacked leather washers stabilized with epoxy resin
Guard and pommel: Metal
Blade length: Approx. 159mm
Blade thickness: Approx. 7.1mm
Overall length: Approx. 273mm
Weight: Approx. 349g
Sheath: Original black leather sheath with sharpening stone pocket and Special Forces crest
Notes: Previously purchased and used knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; has minor scuffs on the tip of the blade and on the spine of the knife
* Commercial Availability: Discontinued in this configuration
* Sharpening: Factory-sharpened
* Marks on blade: Minor scuffs on the tip of the blade and the spine of the knife
* Marks on handle: None
* Box: Missing
* Sheath: Present and in good condition
* Manuals, Certificates, and Warranties: Missing
* Inspected and certified by our in-house laboratory

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has given rise to the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended Use: Collectible / Utility

Manufacturing Type: Midtech
Country of Manufacture: Boise, Idaho, USA
Blade: CPM-S35VN steel
Surface Treatment: CeraKote
Handle: Black Canvas Micarta
Blade Length: 150 mm.
Blade thickness: 5.58 mm.
Overall length: 292 mm.
Balance: on the lower guard
Weight: 329 g.
Sheath: Nylon thigh sheath, M.O.L.L.E.-compatible
Notes: Previously purchased knife—from a private collection

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, durability, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse middle-finger movements and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Standard (Dual Tone, Satin, and Cerakote)
Handle: Frag Pattern aluminum with Cerakote finish
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued in this steel variant
* Sharpness: Factory-sharpened
* Marks on blade: None
* Marks on handle: Minor cosmetic signs of wear on the clip and screws
* Box: Included
* Sheath: -
* Manuals, Certificates, and Warranties: Included
* Inspected and certified by our in-house laboratory

The Microtech Socom Elite is one of the most iconic folding knives produced by Microtech, prized for its combination of durability, ergonomics, and reliability. Designed for professional and tactical use, over the years it has also established itself as a benchmark among collectors and enthusiasts of high-end cutlery.

The model presented here, manufactured in 2019, features a blade made of Carpenter CTS-204P steel, one of the best high-performance stainless steel alloys in its class, known for its excellent edge retention, high corrosion resistance, and outstanding wear resistance. The black/dual-tone finish contributes to its particularly aggressive and professional appearance.

The aluminum handle with non-slip inserts ensures a firm and comfortable grip even under the most demanding conditions, while the manual thumb stud opening system and the proven liner lock mechanism guarantee quick deployment and safety during use.

Thanks to Microtech’s signature build quality and a design that has become an industry classic, the Socom Elite is an excellent choice for both everyday use and for collectors seeking one of the most iconic models in the American brand’s modern lineup.

Intended Use: Tactical, EDC

Production Type: Industrial
Country of Manufacture: USA
Blade: Carpenter CTS-204P stainless steel
Blade Finish: “Normal” (Black PVD + Satin)
Handle: Aluminum with non-slip inserts
Blade Length: 101mm
Blade thickness: 4 mm
Closed length: 127 mm
Overall length: 228 mm
Closed thickness: 15 mm
Weight: 157 g
Lock type: Liner Lock
Clip: Stainless steel, removable
Packaging: Microtech box with manuals
Notes: Previously purchased knife, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Knife manufactured in 2010, acquired from a private individual, previously purchased
* Condition: Overall in excellent condition, with some signs of wear, especially on the sheath
* Available on the market: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: A few small signs of wear, visible against the light
* Marks on the handle: None
* Box: Present and complete
* Sheath: Present, with some minor signs of wear that do not compromise its use
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our in-house laboratory

Discontinued and increasingly difficult to find, the Chris Reeve Nyala is considered one of the most iconic and highly regarded fixed-blade knives in the Chris Reeve Knives lineup. Originally designed as a versatile hunting and outdoor knife, it represents one of the most successful interpretations of the modern field knife, combining clean lines, excellent ergonomics, and a full-tang construction designed to ensure absolute reliability.

Crafted from CPM S35VN steel and finished to the exceptionally high quality standards that have made the brand famous, the Nyala offers benchmark cutting performance, great durability, and a versatility that makes it ideal for outdoor use as well as for hunting.

Produced until 2020, the Nyala perfectly embodies Chris Reeve’s design philosophy: eliminating the superfluous to create a functional, durable, and uncompromising tool. Today, its limited availability on the market further enhances its appeal, making it one of the most sought-after models among both brand enthusiasts and collectors of contemporary custom and semi-custom knives.

Intended Use: Hunting/Sporting

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-S35VN stainless steel, 58/59 HRC
Blade Finish: Stonewashed
Handle: Brown canvas Micarta
Blade Length: 95mm.
Blade thickness: 4.5mm.
Overall length: 216mm.
Weight: 175g.
Sheath: Brown leather by G. Feller Casemakers
Packaging: Cardboard box with Chris Reeve logos; warranty certificates
Notes: 2010 knife previously purchased, from a private collection, full set

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, durability, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse middle-finger movements and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Standard (Dual Tone, Satin, and Black PVD)
Handle: Frag Pattern aluminum with Cerakote finish
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom introduced in 1996, the Delta carries on its legacy while taking it to the next level in terms of ergonomics, sturdiness, and operational versatility. Available with a clip-point or tanto blade, it guarantees top-notch performance in any situation. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even while wearing gloves, reinforce its professional appeal. Its rugged reliability makes it a top choice even in the most demanding environments, now featuring RAM-LOK technology.

This rugged reimagining of the crossbar lock features Microtech’s signature stepped pattern, made famous by the Ultratech series’ activation switches. The blade’s wide cutout provides space for reverse movements of the middle finger and for the standard slow-rotation thumb opening, with or without gloves. If neither of these is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured, offering excellent grip potential for both standard and reverse grips. 

Intended Use: Tactical / Military / Collectible

Manufacturing Type: Midtech
Country of Manufacture: USA
Blade: M390MK stainless steel, 60-61 HRC
Blade finish: Apocalyptic
Handle: Anodized aluminum
Blade length: 101 mm
Blade thickness: 3.5 mm
Closed length: 129 mm
Overall length: 233 mm
Closed thickness: 14mm.
Weight: 152g.
Lock: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: Stainless steel, removable and reversible (tip-up)
Packaging: Cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom, launched in 1996, the Delta takes its legacy to the next level in terms of ergonomics, solidity, and operational versatility. Available with a clip point or tanto blade, it guarantees absolute performance in any context. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even when wearing gloves, reinforce its professional vocation. Its robust reliability makes it a preferred choice even in the most demanding environments, now with RAM-LOK technology.

This robust reinterpretation of the crossbar closure features Microtech's characteristic stepped pattern, made famous by the Ultratech series of operating switches. The wide blade cutout provides space for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured to provide excellent grip potential with both standard and reverse grips. 

Limited edition “Marfione Select” with handle made entirely of solid titanium with a stonewashed finish, rear spacer in blue double vapor blast anodized titanium. The knife comes with a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione himself.

Intended use: Tactical / Military / Collectible

Type of production: Midtech
Country of production: USA
Blade: M390MK stainless steel 60-61HRC
Blade finish: Stonewashed
Handle: Titanium Slab Stonewashed
Blade length: 101mm.
Blade thickness: 3.5mm.
Closed length: 129mm.
Total length: 233mm.
Closed thickness: 14mm.
Weight: 153g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up) with Marfione's signature
Packaging: cardboard box with Microtech USA and “Signature Series” logos
Notes: Design by Anthony Marfione - Limited edition collector's item accompanied by a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Knife from 2018 in excellent overall condition, never used for cutting, has very small spots of oxidation on the blade that do not compromise its practical use in any way
* Available on the market: Model out of production and no longer available on the market
* Sharpness: Factory sharp
* Marks on blade: Very small signs of oxidation that do not compromise its use
* Marks on handle: None
* Box: Present and complete
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

Intended use: Tactical/Collection

Type of production: MidTech
Country of production: USA
Blade: D2 steel 
Blade finish: Tumbled & Satin
Handle: full titanium
Blade length: 95mm.
Blade thickness: 5mm.
Total length: 227mm.
Thickness when closed: 13mm.
Weight: 254g.
Closure: Frame Lock
Clip: removable, titanium, with tumbled finish
Packaging: tactical polymer case with Medford logos, cardboard outer box, certificates, and warranties
Notes: discontinued model, produced in 2018, previously purchased and from a private collection

RETIRED KNIFE FROM PRIVATE COLLECTION
* Provenance: Withdrawn from a private individual, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in very good condition (typical signs of wear of this model and material given by rubbing with the sheath)
* Available on the market: Difficult to find and not in this configuration
* Sharpening: Professionally sharpened
* Blade marks: Typical wear marks of this model and material, given by rubbing with the sheath
* Signs on handle: None
* Box: -
* Sheath: Present and in excellent condition, Made in USA by SpecOps
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

Intended use: Multi-role

Type of Production: industrial
Blade: Full Tang in Titanium Beta, with micro-balled finish
Country of production USA
Grip: Black G10
Blade length: 130mm.
Blade thickness: 6.3mm.
Total length: 255mm.
Weight: 243g.
Sheath: Made in USA by SpecOps, in coyote colored Nylon, belt, MOLLE compatible, with thermoformed Kydex inner part
Packaging: -
Note: Previously purchased knife, from private collection - iconic product from the early 2000s

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Iconic knife from the early 2000s, never used, in excellent condition (signs of wear typical of this model and material due to rubbing against the sheath)
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: Signs of wear typical of this model and material, due to rubbing against the sheath
* Marks on handle: N/A
* Box: Present and in excellent condition
* Sheath: Present and in excellent condition, never used, with normal signs of age
* Manuals, Certificates, and Warranties: /
* Checked and Certified by our in-house laboratory

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance, and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after intensive use.

The knives have been tested and selected by the US Navy SEALs, who have used them in sensitive missions and special operations. Thanks to their incredible strength, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and enthusiasts of high-end outdoor equipment.

Intended use: Multi-purpose / Diving

Type of production: Industrial
Blade: Beta Titanium with micro-shot peened finish
Country of manufacture: USA
Handle: Beta Titanium with micro-shot peened finish
Blade length: 125mm.
Blade thickness: 6.3mm.
Total length: 248 mm.
Weight: 151 g.
Sheath: thermoformed Kydex, with removable nylon belt loop for vertical carry on belt.
Packaging: cardboard box with Mission Knives logos.
Notes: previously purchased knife from a private collection - discontinued, iconic product from the early 2000s.

The Socom Delta represents the modern evolution of a Microtech icon, setting extremely high standards in the world of tactical and utility knives. A direct descendant of the legendary Socom, launched in 1996, the Delta takes its legacy to the next level in terms of ergonomics, solidity, and operational versatility. Available with a clip point or tanto blade, it guarantees absolute performance in any context. The integrated glass breaker at the base of the handle and the large pivot, which allows for easy opening even when wearing gloves, reinforce its professional vocation. Its robust reliability makes it a preferred choice even in the most demanding environments, now with RAM-LOK technology.

This robust reinterpretation of the crossbar closure features Microtech's characteristic stepped pattern, made famous by the Ultratech series of operating switches. The wide blade cutout provides space for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down the RAM-LOK and the blade opens with a simple flick of the wrist. The aluminum handles are slightly textured to provide excellent grip potential with both standard and reverse grips. 

Limited edition “Marfione Select” with handle made entirely of solid titanium with a stonewashed finish, rear spacer in blue double vapor blast anodized titanium. The knife comes with a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione himself.

Intended use: Tactical / Military / Collectible

Type of production: Midtech
Country of production: USA
Blade: M390MK stainless steel 60-61HRC
Blade finish: Stonewashed
Handle: Titanium Slab Stonewashed
Blade length: 101mm.
Blade thickness: 3.5mm.
Closed length: 129mm.
Total length: 233mm.
Closed thickness: 14mm.
Weight: 153g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up) with Marfione's signature
Packaging: cardboard box with Microtech USA and “Signature Series” logos
Notes: Design by Anthony Marfione - Limited edition collector's item accompanied by a microfiber pouch, a microfiber cleaning cloth, and a stainless steel warranty certificate autographed by Marfione.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and lightly used
* Condition: Overall in excellent condition, slight discoloration on the anodized opening pin
* Available on the market: Out of production
* Sharpness: Resharpened, sharpness could be improved
* Marks on blade: None
* Marks on handle: None
* Box: Present and original, but generic: no model references
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: collection/sports

Type of production: MidTech
Country of production: USA
Blade: CPM-S30VN stainless steel 58/59HRC
Handle: Hammered titanium - a texture obtained by hand hammering that creates small irregular marks on the surface of the handle. The result is a three-dimensional appearance, with variable reflections in the light, greater grip, and a unique handcrafted character for each piece.
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 10mm.
Weight: 81g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos, no references

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: In good condition, shows signs of wear on the titanium and a small mark on the blade that does not compromise its use
* Available on the market: Available to order from the manufacturer in different technical configurations
* Sharpness: Factory sharp
* Marks on blade: a small mark on the blade, possibly due to an impact or a fall
* Marks on handle: several signs of wear on the titanium
* Box: -
* Sheath: -
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house laboratory

Intended use: Collectible/Sporting

Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Titanium and Bocote
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 156mm.
Weight: 40g.
Closure: Frame Lock
Clip: Titanium
Notes: Mnandi means “very beautiful” in Zulu - knife previously purchased and used

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

Continuing the glorious tradition of Chris Reeve Knives that pay tribute to elite military forces, the Reeve/Harsey collaboration has created the Pacific, the civilian version of a knife created to celebrate the 50th anniversary of the 1st Special Forces Group (Airborne).

Intended use: Collection / Utility

Type of production: Midtech
Country of production: Boise - Idaho - USA
Blade: CPM-MagnaCut steel at 61/62HRC
Surface treatment: CeraKote
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thigh sheath, M.O.L.L.E. compatible
Notes: Warranty and authenticity certificates - Design by William W. Harsey

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in good condition, shows some signs of wear and tear and some imperceptible traces of oxidation on the GunKote finish
* Available on the market: Out of production since 2009
* Sharpness: Factory sharp, excellent
* Marks on blade: Some minor cosmetic signs of oxidation on the GunKote finish
* Marks on handle: Some signs of wear due to age
* Box: Not included
* Sheath: Black leather, pancake style, in excellent condition
* Manuals, Certificates, and Warranties: Not included
* Checked and certified by our in-house laboratory

Designed to tackle the most extreme challenges, the Chris Reeve Aviator is much more than just a knife: it is a survival legend. Forged from a single block of steel and designed with surgical precision, this compact and extremely robust tool has accompanied pilots, operators, and enthusiasts to every corner of the world.

The watertight hollow handle, A2 steel blade with tactical finish, and functional rear serrations make the Aviator a reliable companion in any scenario, from the jungle to the desert. A perfect balance between military engineering and refined craftsmanship.

Produced until 2009, today the Aviator is a coveted collector's item and an icon for those who refuse to compromise on form, function, and history.

Intended use: Survival / Light Utility

Type of production: Midtech
Country of production: USA
Blade: A2 carbon steel with a hardness of 55/57HRC
Blade finish: GunKote 
Handle: integral, hollow, with screw-on rear cap made of aluminum
Blade length: 105mm.
Blade thickness: 4.5 mm.
Total length: 205 mm.
Weight: 180 g.
Sheath: black leather, pancake type, made in the USA
Packaging: -
Notes: Product discontinued since 2009; rare collector's item complete with original certificate

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the original Socom's inception in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

The knife from Rambo: First Blood Part II — often called the “Mission” or “Rambo II knife” — is the work of master American knife maker Jimmy Lile.

Created at the request of Sylvester Stallone, the model was designed not as a simple movie prop but as a real survival knife: a long, sturdy blade, partially serrated back, and handle designed for prolonged use and to hold small emergency accessories. 

Lile's design, much more aggressive than the knife in the first film, emphasizes the character's transformation into an even more operational and autonomous figure in the field.

The film, released in 1985 and directed by George P. Cosmatos, helped transform this knife into a popular icon: from a functional tool to a symbol of adventure and resilience.

Intended use: Collection 
Blade: 420J2 stainless steel
Blade finish: Satin finish and black coating
Handle: Hollow, made of die-cast aluminum, with the exterior wrapped in paracord; the rear has a screw cap with a bushing that allows access to the compartment containing all the survival accessories (windproof matches, needles, fish hooks, etc.)
Blade length: 10.5 inches.
Blade thickness: 0.2 inches.
Handle length: 100 mm.
Total length: 385 mm.
Balance: Forward, 2 cm from the lower guard branch.
Weight: 505 g.
Sheath: Leather, with diamond sharpener. 
Notes: Limited and numbered edition with John Rambo's signature on the blade and sheath.

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

Premium materials, fine finishes, and a safety locking system, all in an incredibly light and precise tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm “click” and heirloom quality produced with aerospace tolerances.  The Sebenza 31 adds more refined details to an already very capable knife, taking another steady and reliable step forward.

Intended use: Collectible/Sporting

Type of production: MidTech
Country of production: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Micro-peened 6AL4V titanium with blackened oak wood inserts
Blade length: 91.7mm.
Blade thickness: 3 mm.
Closed length: 122 mm.
Total length: 213.5 mm.
Weight: 133g.
Lock: Frame Lock
Clip: Microblasted 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, threadlocker, disassembly tool, microfiber cloth, manuals, and warranty certificate.
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Knife previously purchased from a private collection
* Condition: Overall in excellent condition, with minor abrasions on the titanium due to age
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Minor abrasions on the titanium due to age
* Box: Present and complete
* Sheath: Leather pouch with Chris Reeve logos
* Manuals, Certificates, and Warranties: Present and complete
* Checked and certified by our in-house laboratory

Intended use: collection/sport

Type of production: MidTech
Country of production: USA
Blade: CPM-S35VN stainless steel 58/59HRC
Handle: Carbon fiber and micro-shot peened 6AL4V titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 10mm.
Weight: 105g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, some cosmetic marks on the titanium handle and clip
* Available on the market: Out of production, replaced by different steel variants
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: Some cosmetic marks on the titanium handle and clip
* Box: Present and complete
* Sheath: -
* Manuals, certificates, and warranties: Present
* Checked and certified by our in-house laboratory

Intended use: Sports/collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: 6Al4V titanium with canvas micarta inserts
Blade length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Weight: 78g.
Lock: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfiber cloth, maintenance tools
Notes: previously purchased knife from a private collection, date of manufacture August 2023

The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.  

Premium materials, fine finishes, and a safety locking system, all in an incredibly light and precise tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.  

Like the first Sebenza, it offers the same warm “click” and heirloom quality produced with aerospace tolerances.  The Sebenza 31 adds more refined details to an already very capable knife, taking another steady and reliable step forward.

Intended use: Collectible/Sporting

Type of production: MidTech
Country of production: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Micro-peened 6AL4V titanium with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3 mm.
Closed length: 101 mm.
Overall length: 177.3 mm.
Weight: 85 g.
Lock: Frame Lock
Clip: Microblasted 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, threadlocker, disassembly tool, microfiber cloth, manuals, and warranty certificate
Notes: Manufactured in June 2025

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in good condition: mechanically excellent, aesthetically shows signs of use
* Available on the market: Out of production (currently available with different steel variants)
* Sharpness: Factory sharpness, could be improved
* Marks on blade: Minimal signs of use, small abrasions visible against the light
* Marks on handle: Several signs of use on the micarta handle and clip, rear paracord lanyard missing
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

The idea behind the Sebenza has always been clear: to create the best pocket knife in the world.

Made with the highest quality materials, fine finishes, and a secure locking system, the Sebenza combines lightness and precision in a unique tool. This philosophy continues today with the new Sebenza 31.

Like its predecessor, it offers the characteristic and reassuring “click” when closing and a quality that is destined to last over time, the result of aerospace-level manufacturing tolerances. With the Sebenza 31, tradition is renewed thanks to even more refined details, marking a further step forward in consistency and reliability.

Intended use: Collection/Sports

Type of production: MidTech
Country of production: USA
Blade: CPM-S45VN stainless steel
Blade finish: Stonewashed
Handle: Microblasted 6AL4V titanium
Blade length: 76.2mm.
Blade thickness: 3 mm.
Closed length: 101 mm.
Total length: 177.3 mm.
Weight: 85 g.
Lock: Frame Lock
Clip: Microblasted 6AL4V titanium
Packaging: Cardboard box with Chris Reeve logo, fluorinated grease, thread lock, disassembly tool, microfiber cloth, manuals, and warranty certificate
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, NOS (new old stock), never used or removed from its original box
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present and perfect
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

Created in 1986 as the second official model of the newly formed SOG Specialty Knives, the S2 Trident is not just a knife, but a bridge between the past and the present. Designed in honor of the Navy SEALs and special units that operated in Vietnam, it draws direct inspiration from the legendary MACV-SOG knives of the 1960s, “sterilized” and lethal tools used in the most secret missions of the conflict.

Produced during the company's golden age in Seki, Japan, the Trident combines elegant lines and combat functionality: a thick, balanced AUS-8 steel Bowie blade with impeccable satin finish; ergonomic and durable black micarta stacked washer handle; and the engraved Navy SEAL symbol, a seal of belonging to an elite group. The leather sheath with sharpening stone completes a package designed for operators and collectors.

The S2 Trident is the most refined tribute to SOG's operational past: a homage to the military tradition of Vietnam reinterpreted with Japanese craftsmanship. Today, with a very high rarity index, it is considered one of the most sought-after pieces by military knife collectors, not only for its build quality, but for the history embodied in its blade.

Intended use: Military / Collection

Type of production: industrial
Country of production: Seki - Japan
Blade: AUS-8 stainless steel
Blade finish: Satin
Handle: Stacked micarta rings
Blade length: 160mm.
Blade thickness: 6 mm.
Total length: 278 mm.
Balance: rearward, 1 cm from the guard
Weight: 312 g.
Sheath: leather with pocket for sharpening stone (included)
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Iconic knife handmade in 2021, withdrawn from a private collection, previously purchased
* Condition: in excellent condition, unused and kept solely in a collection
* Available on the market: Currently out of catalog and cannot be ordered/obtained from the craftsman
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: in excellent condition, with signature and date of manufacture
* Manuals, Certificates, and Guarantees: Certificate of guarantee and authenticity with date and technical data of the model
* Checked and certified by our in-house laboratory

THE LEGEND
Jimmy Lile (1933–1991), known as “The Arkansas Knifesmith,” was one of the most important American knife makers of the 20th century. Born in Russellville, Arkansas, he made his first knife at the age of 11 and devoted himself professionally to knife making in 1971.

He is famous for the legendary Rambo knives, designed for real use with 440C blades, hollow handles, and innovative details. He was president of the Knifemakers' Guild, and his works were commissioned by presidents and celebrities.

He died in 1991, leaving a legacy of the highest caliber in custom and collectible knives.

THE PRESENT
Today, the Lile Knives, LLC brand is owned by John Hill of McKinney, Texas. In the 1980s, John was already collaborating with Bob Rankin on the sale of original Rambo knives, and in 2003 he co-authored a book dedicated to Lile's work.

After Jimmy's death, John maintained a strong relationship with Marilyn (Lile) Miller and purchased the Lile brand from her to continue producing high-quality replicas of the movie knives, adhering to custom knife standards and guaranteeing Marilyn royalties.

Since 2011, John Hill has been collaborating with Vaughn Neeley, former owner of Timberline Knives, to produce limited editions of Rambo knives that are prized by collectors. Today, Vaughn produces the entire new “Cerakote™ Series,” while the “Utility Series” is produced under his supervision, keeping alive the tradition and quality of Jimmy Lile's original models.

THE KNIFE
“The Mission” is one of the most iconic survival knives ever made, born from Jimmy Lile's vision to combine extreme functionality and military design.

Featuring a stainless steel blade finished entirely with bead-blasting to eliminate reflections, this model combines tactical aesthetics and real performance.

The back is equipped with aggressive serrations, while the hollow handle, wrapped in paracord, integrates a compass and allows for the transport of small tools.

The multifunction guard features screwdriver tips, making it a complete survival tool. Produced in a limited edition, “The Mission” represents the perfect synthesis between a combat knife, field tool, and collector's item.

Intended use: Collection / Survival

Type of production: entirely handmade
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Titanium Grey Cerakote
Handle: 316 stainless steel, hollow, waterproof, paracord coated; 316 stainless steel through guard; screw-in aluminum tang with integrated glass breaker and Pyser Optics NATO internal compass
Blade length: 253mm.
Blade thickness: 7 mm.
Total length: 393 mm.
Weight: 573 g.
Sheath: black leather, belt-mounted, for vertical carry, with craftsman's signature and date of manufacture
Packaging: supplied with warranty certificate with date of manufacture and technical details
Notes: iconic knife used in the Rambo films, entirely handmade, with LILE logos and serial number. Previously purchased, never used, from a private collection

The Chris Reeve Inkosi Large Tanto is the evolution of the iconic Sebenza, designed for those looking for a sturdy and precise folder with a decisive tactical soul. This version features a CPM-MagnaCut steel tanto blade, one of the most modern and high-performance alloys: excellent edge retention, very high corrosion resistance, and superior toughness for truly heavy-duty use.

With its titanium frame lock with hardened steel reinforcement, precision phosphor bronze bearings, and oversized integral spacer, the Inkosi is built to last a lifetime and beyond. The tanto geometry offers exceptional penetration and a reinforced tip, making it ideal for precise cuts and EDC or tactical applications where strength is essential.

Perfect for collectors and enthusiasts who want the best of American engineering in a high-end folding knife.

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC with blue anodized titanium thumbstud
Blade finish: Stonewashed
Handle: Sandblasted 6AI4V titanium with blue anodized titanium lanyard bead
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed length: 122mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 142g.
Closure: RIL (Reeve Integral Lock / Frame Lock)
Clip: removable, titanium
Packaging: cardboard box with Chris Reeve logos, warranty certificates, routine maintenance tools
Notes: New item, with certificate dated May 2025

Umnumzaan means “The Chief” in Zulu, and this folding knife lives up to its name in every way. Designed for maximum strength and reliability in your pocket, it combines the strength of a fixed blade with the convenience of a folding knife.

Featuring advanced modifications to the renowned Reeve Integral Lock, it offers increased blade strength, optimized pivot and closure tolerances, and improved overall ergonomics. The hollow-ground blade, heat-treated to maintain elasticity and edge retention, also incorporates a glass breaker when closed, for added functionality in emergency situations.

The Umnumzaan is a bold and innovative folding knife, respected for its ingenious design and ability to tackle any task: proof that the strength of a fixed blade can truly fit in your pocket.

Intended use: Sports / Collection

Type of production: Midtech
Country of production: USA
Blade: CPM-MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Sandblasted 6AI4V titanium with blue anodized titanium lanyard pin
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Total length: 212mm.
Closed thickness: 17mm.
Weight: 142g.
Closure: RIL (Reeve Integral Lock / Frame Lock)
Clip: removable, titanium
Packaging: cardboard box with Chris Reeve logos, warranty certificates, routine maintenance tools
Notes: New item, with certificate dated June 12, 2025

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in good condition, it has some minor signs of oxidation on the guard and pommel that have not been removed so as not to alter the original finish of the knife, and a couple of small cosmetic scratches on the blade. The sheath is present and perfectly usable, but discolored and “worn” in some parts due to the passage of time
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: A couple of small scratches on the left side of the blade and signs of oxidation on the guard and pommel
* Marks on handle: None
* Box: -
* Sheath: Present, complete with diamond sharpener and original bushing, but discolored and worn due to the passage of time
* Manuals, certificates, and warranties: -
* Checked and certified by our in-house lab

The Gerber BMF (Basic Multi-Function) is a fixed blade knife produced by Gerber Legendary Blades between 1986 and the late 1990s. Designed as a sturdy and versatile survival tool, it has become a cult object among collectors and enthusiasts of military and outdoor knives. Its impressive blade, non-slip handle, and sheath with accessories make it one of the most iconic models of Gerber's production from that period.

Intended use: Survival / Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: micro-peened
Country of manufacture: USA
Handle: Hypalon (neoprene-like material)
Blade length: 200mm.
Blade thickness: 6 mm.
Total length: 342 mm.
Balance: on the guard
Weight: 433 g.
Sheath: ABS and Cordura
Notes: knife from a private collection, previously purchased, serial number 006282 - The original compass is in the pocket on the sheath.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: 2015 specimen, like new
* Commercially available: Still in production
* Sharpening: Factory sharpened
* Marks on blade: No
* Marks on handle: None
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: All Rounder Utility

Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel engraved
Blade finish: mirror polish
Handle: wood and brass
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 205g.
Closure: Back Lock
Sheath: nylon sheath
Packaging: not present
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never used
* Commercially available: Handcrafted, one-of-a-kind, no longer in production
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Bud Nealy's MCS II System knives are designed to be compact and lightweight, with a focus on low weight. The MCS System, developed in the 1980s, offers great versatility in carrying thanks to a Kydex sheath that can be adapted with five different attachments (included), allowing nine carrying positions. Ambidextrous use of the system is possible.

The MCS System has been improved with the MCS II, which incorporates 3M Dual Lock attachment systems with five times the adhesion strength of classic Velcro. This version further increases versatility and allows transport positions to be configured more quickly. The system offers options for both on-body and off-body carrying.

Intended Use: Tactical/Collection/Neck Knife/CQD

Country of manufacture: USA
Type of production: Handcrafted
Blade: CPM-S30V satin-finished stainless steel
Handle: G10
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: Backward
Weight: 120g.
Scabbard: Ultra flat Kydex scabbard with MCS II multi-carry and attachment system developed by Bud Nealy
Notes: Entirely handmade - 2004 model - Serial #7307

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: G10
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The Arbiter concept was originally sketched out by Adam Marfione in 2012. Microtech is excited to bring this piece into production as Adam begins to become an integral part of the team. Previously available only as a custom knife, the Arbiter features a 9" bowie-style clip point blade with an elegant curved primary cutting edge that flows into a raised tip with devastating penetrating power. The G10 grips feature a crisscross pattern and grooves along the edge of the handle that provide an impressive grip, creating a perfect harmony between user and tool. The Arbiter comes with a custom Blade-Tech carry system attached to the molded composite scabbard.

Intended Use: Tactical

Type of manufacture: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 229mm.
Blade thickness: 4mm.
Total length: 362mm.
Weight: 504g.
Sheath: made of Kydex Carbon Fiber, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: 2001 knife, discontinued, featuring asymmetrical/chisel sharpening
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small marks from time.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Military

Type of production: industrial
Blade: 154CM stainless steel with asymmetric/chisel sharpening
Blade finish: Stone Washed
Country of manufacture: USA
Handle: G-10 with titanium liners
Blade length: 72mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 180mm.
Weight: 92g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: knife from 2001 discontinued, previously purchased, from a private collection

KNIFE RETRIEVED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private owner, previously purchased
* Condition: Like new, never taken out of its box
* Market Availability: Hard to find
* Factory Edge: Yes
* Blade Marks: None
* Handle Marks: None
* Box: Original, with logos and accessories
* Sheath: Included
* Manuals, Certificates & Warranty: Complete set included
* Inspected and Certified by our internal laboratory

The Halfbreed Blades HBBLBK01OD is a high-end tactical knife designed to withstand the most extreme conditions. Built with a solid full-tang blade made of Böhler K110 steel, it provides excellent wear resistance and outstanding cutting performance. The 146 mm blade is coated with OD Green Teflon (PTFE), reducing friction and protecting the steel from corrosion.

The handle, made of black G10, ensures a secure grip in any situation, while the crusher pommel with an integrated fire starter adds extra functionality for survival scenarios. The design also features a lanyard hole and a bow drill system on both sides of the handle, making it ideal for survival use.

Supplied with a Kydex MOLLE-compatible sheath, the Halfbreed Blades HBBLBK01OD is perfect for tactical operators, military personnel, and outdoor enthusiasts looking for an indestructible and high-performance knife. Made in Australia, this tool embodies reliability and uncompromising toughness.

Technical Specifications
Intended Use: Tactical, Survival, Military
Production Type: Industrial
Country of Manufacture: Australia
Blade: Böhler K110 Steel
Blade Finish: PTFE (OD Green Teflon)
Handle: Black G10
Blade Length: 146 mm
Blade Thickness: 6.5 mm
Total Length: 286 mm
Weight: 541 g
Locking Mechanism: Full-Tang (Fixed Blade)
Clip: -
Packaging: Halfbreed Blades Box + Kydex MOLLE-compatible Sheath
Notes: Lanyard hole, Crusher pommel with fire starter, Bow drill on both sides of the handle

Microtech Socom Elite is a high-end folding knife designed to meet the needs of tactical operators, high-quality knife enthusiasts, and collectors. This Manual Folding Knife model stands out for its robustness, ergonomic design, and high performance, making it ideal for intensive use.

The blade, made of Böhler M390 steel, offers exceptional edge retention, high corrosion resistance, and outstanding hardness (60-62 HRC). The Black PVD finish provides additional protection, reducing reflections and increasing wear resistance.

The handle, crafted from anodized blue aluminum with G-10 inserts, ensures a secure grip and excellent control in all situations. The manual opening via thumb stud is smooth and quick, while the robust liner lock mechanism guarantees maximum safety during use.

Thanks to its sophisticated design and outstanding technical features, the Microtech Socom Elite is a perfect knife for everyday carry (EDC) and tactical operations.

Technical Specifications

Intended Use: Tactical, EDC
Production Type: Industrial
Country of Manufacture: USA
Blade: Böhler M390 steel, hardness 60-62 HRC
Blade Finish: Black PVD
Handle: Anodized blue aluminum with G-10 inserts
Blade Length: 101mm
Blade Thickness: 4mm
Closed Length: 127mm
Overall Length: 228mm
Closed Thickness: 15mm
Weight: 157g
Locking Mechanism: Liner Lock
Clip: Stainless steel, removable, tip-down carry position
Packaging: Microtech box with certificate of authenticity
Notes: High-quality product, made with premium materials for intensive use

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

Source: Acquired from a private owner, previously purchased
Condition: Overall in excellent condition
Availability: NOT IN PRODUCTION SINCE 2009
Sharpening: Original
Blade marks: None
Handle marks: None
Box: NOT INCLUDED
Sheath: Black leather
Manuals, Certificates, and Warranty: Certificate of Authenticity
Inspection: Checked and certified by our internal laboratory

The Chris Reeve Ubejane Skinner is a high-quality hunting knife crafted in the United States by renowned artisan Chris Reeve. The term "Ubejane" means "rhinoceros" in Zulu, reflecting the tool's robustness and reliability. Manufactured between 1990 and 2009, the Ubejane Skinner is now a highly sought-after collector's piece.

Product details:

• Intended use: Collection/Hunting/Sport
• Production type: Semi-Handcrafted
• Country of origin: USA
• Blade: A2 steel with 55/57 HRC hardness
• Blade finish: Black anti-reflective Kalgard coating
• Handle: Hollow steel handle with knurling for a secure grip
• Blade length: 114 mm
• Blade thickness: 4.5 mm
• Closed length: Not applicable (fixed blade knife)
• Total length: 241 mm
• Closed thickness: Not applicable
• Weight: 326 g
• Lock: Not applicable (fixed blade knife)
• Clip: Not included
• Packaging: Black leather sheath; cardboard box not included
• Notes: Out of production since 2009; rare collectible item complete with original certificate

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: G10
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Iconic knife from the early 2000s, used, but overall in excellent condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: Signs of wear typical of this model and material, given by rubbing against the sheath
* Marks on handle: None, normal workmanship marks found on all these models.
* Box: /
* Scabbard: Present, in very good condition, with normal signs of workmanship present on all of these models.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory.

MISSION beta titanium knives are high-quality tools designed to withstand the most extreme conditions.

Made from a special beta titanium alloy, these knives combine exceptional lightness, corrosion resistance and strength. MISSION developed these knives to ensure durability and reliability in extreme environments, such as the sea or high temperatures, and they are virtually indestructible. The main feature of these knives is their ability to remain perfectly usable even after heavy use.

The knives have been tested and selected by U.S. Navy SEALs, who have used them in sensitive missions and special operations. Because of their incredible durability, ease of maintenance, and reliability, they have become a benchmark for special forces professionals and high-end outdoor equipment enthusiasts.

Intended Use: Tactical/Sub

Type of Manufacture: industrial
Blade: made of Beta Titanium with a micropeened finish
Country of manufacture USA
Handle: Hytrel
Blade length: 185mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 264g.
Sheath: made of Hytrel and rubber, with Nylon strap
Packaging: /
Notes: previously purchased knife, from private collection - discontinued, iconic early 2000s product

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

PREVIOUSLY PURCHASED KNIFE, RETRIEVED FROM PRIVATE COLLECTION
* Type: previously purchased knife, from a private collection
* Condition: "First Production Run" edition, like new, never used, never removed from the packaging, and never placed in the sheath
* Available on the market: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present, also includes a second new leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratory

The Bark River Ultra Lite Field Knife is a versatile knife designed to excel in bushcraft activities but capable of handling many other functions. Its clip/harpoon blade is made of CPM 3V steel, offering excellent resistance and holds its edge well, making it ideal for processing game and food preparation. However, it is important to protect it from moisture and acids, as it is not completely stainless; regular maintenance, such as cleaning and applying oil, is recommended to preserve its quality.

The handle is made from a wonderful desert ironwood burl, a precious wood that has a unique and variable appearance. Each handle is different, reflecting the value of the natural product. The entire design of the knife makes it an excellent tool for both practical use and for those seeking a distinctive item.

Intended use: Hiking / Utility / Bushcraft

Country of production: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burl
Blade length: 115mm.
Blade thickness: 3.2mm.
Total length: 213mm.
Weight: 125g.
Sheath: leather
Notes: knife from a private collection, like new, never removed from its packaging and never placed in the sheath - Out of production and no longer available on the market, differs from the standard production by the use of burl wood for the handle - "First Production Run" engraved on the blade

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the original Socom's inception in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the original Socom's inception in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

Microtech Socom knives are named after the U.S. Special Operations Command, abbreviated as Socom; an operational command under the U.S. Department of Defense Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does! Thanks to high-quality materials that can withstand all the rigors of the battlefield. Knives built to last.

The Microtech Signature Series line is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of premium materials and finishes: such as carbon fiber, copper, Damascus, and DLC.

Intended Use: Tactical/Sporting

Type of production: Midtech
Country of Production: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black DLC
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 186g. (297g. including scabbard)
Sheath: made of Kydex Carbon Fiber, with Tek-Lok type attachment
Packaging: cardboard box with Microtech USA logos
Notes: -