The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The Fox Spora mushroom picking knife was designed specifically to handle the delicate nature of mushroom stems, thereby making the harvesting process easier.

With its specially designed blade, it allows for a precise cut of the stems without damaging the mycelium—the delicate, root-like fibers from which a new mushroom can grow. Additionally, the retractable brush makes it easy to clean debris from the mushroom before storing it.

The attractive design and carrying clip make the knife practical and always ready for use during mushroom foraging trips.

 

Intended Use: Mushroom Knife

Country of Manufacture: Italy
Blade: Sandvik 12C27 stainless steel
Handle: deer antler
Blade Length: 65 mm.
Blade thickness: 3 mm.
Closed length: 110 mm.
Overall length: 175 mm.
Weight: 119 g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: Retractable nylon brush - Design by Riccardo Gobbato / Raven Knives Design

 

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

A sturdy pocket knife designed for the most demanding outdoor activities.

The Moutarde Black version combines a sporty yet elegant style with reliable performance in any situation. Sturdy, functional, and durable, it’s designed for outdoor enthusiasts looking for a tool that can accompany them on every adventure: from hiking to camping, mountain biking, canoeing, and other outdoor experiences.

The No. 08 Horizon Moutarde Black features an 8 cm smooth stainless steel blade—durable and versatile—and a handle made of recycled plastic designed to withstand water and extreme temperatures. Rounding out the features are a built-in 110 dB whistle and a practical lanyard loop.

The blade and ferrule are treated with a black PVD coating, which increases corrosion resistance and gives the knife a modern, distinctive look.

Choose the all-black version for an even bolder design.

 

Intended Use: Hiking / Sports

Manufacturing Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade Finish: Black PVD
Handle: Polyamide with non-slip treatment
Blade Length: 85 mm.
Blade thickness: 2.5 mm.
Closed length: 110 mm.
Overall length: 190 mm.
Thickness when closed: 20 mm.
Weight: 63 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: Equipped with a 110 dB emergency whistle

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

 

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The Amberg Compact is a compact and versatile outdoor knife, designed to accompany you on every adventure. Lightweight, durable, and perfectly balanced, it offers maximum control for precision tasks such as wood carving, fire preparation, and common field tasks.

Despite its compact size, it embodies all the reliability of the Amberg series. The 77 mm blade made of Swedish 12C27 stainless steel guarantees excellent cutting performance, easy maintenance, and long-lasting durability. The Scandi grind ensures precision and control, while the blade spine, compatible with a ferrite fire starter, allows you to start a fire with ease even in outdoor settings.

The ergonomic handle is designed to provide a firm and comfortable grip in all conditions, even with wet, cold, or dirty hands. Thanks to its compact design and practical ambidextrous sheath, the Amberg Compact is the ideal companion for hiking, camping, fishing, hunting, and bushcraft.

Made in Mora, Sweden, with over 135 years of experience in knife manufacturing, it is a reliable tool that is always ready for use when adventure calls.

 

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 77 mm.
Blade thickness: 2mm.
Overall length: 196mm.
Weight: 135g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire striker

The Amberg Compact is a compact and versatile outdoor knife, designed to accompany you on every adventure. Lightweight, durable, and perfectly balanced, it offers maximum control for precision tasks such as wood carving, fire preparation, and common field tasks.

Despite its compact size, it embodies all the reliability of the Amberg series. The 77 mm blade made of Swedish 12C27 stainless steel guarantees excellent cutting performance, easy maintenance, and long-lasting durability. The Scandi grind ensures precision and control, while the blade spine, compatible with a ferrite fire starter, allows you to start a fire with ease even in outdoor settings.

The ergonomic handle is designed to provide a firm and comfortable grip in all conditions, even with wet, cold, or dirty hands. Thanks to its compact design and practical ambidextrous sheath, the Amberg Compact is the ideal companion for hiking, camping, fishing, hunting, and bushcraft.

Made in Mora, Sweden, with over 135 years of experience in knife manufacturing, it is a reliable tool that is always ready for use when adventure calls.

 

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 77 mm.
Blade thickness: 2mm.
Overall length: 196mm.
Weight: 135g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire striker

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

 

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

 

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

 

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: Stonewashed
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

 

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

 

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

 

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE is a compact fixed-blade knife developed in collaboration with Daniele Dal Canto, a guide with the AIGS (Italian Association of Survival Guides). It was created to deliver high performance in a compact format, designed for survival, bushcraft, urban use, and as a backup tool. The range has been updated with new variants in high-visibility Nitrogen steel.

SATRE features a skeletonized full-tang construction that allows the handle to be wrapped in Paracord, adapting it to the user’s needs. Its compact size and the pre-formed black Kydex sheath, equipped with metal eyelets for ambidextrous, vertical, or horizontal carrying configurations on various mounts, make it suitable for use as a neck knife, backup knife, or primary tool in a survival kit.

The range now includes versions in Nitrogen steel (Orange and Yellow), characterized by high corrosion resistance, ease of resharpening, and high visibility in the field.

These are joined by models in N690Co steel (Black, Expeditions, and Stone Washed), a historic benchmark of the series for its overall balance between performance and operational handling, and the variant in Böhler S600 steel (64 HRC), designed for maximum hardness and edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

SATRE is a compact fixed-blade knife developed in collaboration with Daniele Dal Canto, a guide with the AIGS (Italian Association of Survival Guides). It was created to deliver high performance in a compact format, designed for survival, bushcraft, urban use, and as a backup tool. The range has been updated with new variants in high-visibility Nitrogen steel.

SATRE features a skeletonized full-tang construction that allows the handle to be wrapped in Paracord, adapting it to the user’s needs. Its compact size and the pre-formed black Kydex sheath, equipped with metal eyelets for ambidextrous, vertical, or horizontal carrying configurations on various mounts, make it suitable for use as a neck knife, backup knife, or primary tool in a survival kit.

The range now includes versions in Nitrogen steel (Orange and Yellow), characterized by high corrosion resistance, ease of resharpening, and high visibility in the field.

These are joined by models in N690Co steel (Black, Expeditions, and Stone Washed), a historic benchmark of the series for its overall balance between performance and operational handling, and the variant in Böhler S600 steel (64 HRC), designed for maximum hardness and edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Opinel x monbento Origines Lunch Kit

The Origines lunch kit is the result of a collaboration between monbento and Opinel, designed to make eating on the go simpler, more practical, and more sustainable.

This limited edition combines the expertise of two historic French brands in an elegant and functional set, designed to accompany you every day at the office, while traveling, during a picnic, or on outdoor adventures.

Premium materials—stainless steel and beech wood—come together in a contemporary design inspired by a return to the essentials and the conviviality of the nomadic meal.

What’s included in the Origines kit
1L Sense L Lunch Box

The Sense L Lunch Box is a lightweight, sturdy, and durable metal lunch container, designed to last and simplify meals on the go.

Features:

1-liter capacity
Durable and lightweight metal construction
Oven, microwave, and stovetop safe (without lid)
Comes with a beechwood cutting board
Reusable and ideal for daily use
Elegant and practical design

Thanks to its versatile design, the Sense L becomes an indispensable accessory for those seeking a sustainable alternative to disposable containers.

Opinel néo6 Pocket Knife

The néo6 is a compact and easy-to-handle pocket knife that reinterprets the iconic Opinel style with a contemporary twist.

Features:

7 cm stainless steel blade with a rounded tip
OPIFLEX® system that keeps the blade open or closed without locking it
Varnished beechwood handle
Leather lanyard
Compact, practical, and designed for everyday use

Perfect for picnics, lunch breaks, and outdoor activities, offering both practicality and safety.

“Origines” Design

The packaging and the knife are decorated with the “Origines” motif, inspired by cave drawings and symbols of nature.

These motifs evoke a return to the essentials: eating on the go with practical, elegant items built to last.

Technical Specifications
Product Name: Opinel x monbento Origines Meal Kit
Lunch Box Capacity: 1 L
Materials: stainless steel and beech wood
Limited Edition: 3,500 pieces
Usage: office, travel, outdoor, picnic

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

 

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

 

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Features designed for alpine adventures: effectiveness, reliability, and an instant grip, even in challenging conditions.

Discreet and lightweight, it is designed for extreme mountain activities such as ski mountaineering, rock climbing, mountaineering, and ice climbing.

Made in France, it features a polypropylene handle (30% reinforced with fiberglass) and cork, ensuring a secure grip and comfort. It also includes a built-in 100 dB emergency whistle.

Its 8 cm serrated stainless steel blade offers several features: high-quality cutting and high corrosion resistance, a lanyard hole to lighten the knife and open it with ease, as well as a sturdy blunt tip that acts as a mini scraper and facilitates one-handed opening.

Equipped with the OPIFLEX blade locking mechanism, the néo7 Alpine redefines the standards of the pocket knife. This ingenious system allows for smooth, natural, and intuitive opening and closing without any resistance. The lanyard hole on the ring allows you to attach the knife wherever you wish.

 

Intended Use: Mountain Sports / Sports / All-Rounder Utility

Production Type: Industrial
Country of Manufacture: France
Blade: Sandvik 12C27 stainless steel with a blunt tip
Blade finish: Satin
Handle: Glass-fiber-reinforced polypropylene and cork
Blade length: 80mm
Closed length: 105mm
Total length: 185mm
Weight: 41g
Closure: Opiflex safety system (SlipJoint)
Packaging: Cardboard and clear plastic blister pack
Notes: Equipped with a 100db emergency whistle - Standard hex bits can be inserted into the top of the handle

Designed for boating and built for performance at sea, the No. 09 Ocean is an indispensable companion; inspired by the depths of the ocean and the horizon, the No. 09 Ocean Blue is designed for quick identification on board.

Designed for boating and sailing, it combines durability, effectiveness, and safety.

It features a 9 cm semi-serrated stainless steel blade equipped with a blade extractor, and a polyamide handle resistant to water and extreme temperatures. The handle features a whistle and a hardened steel knot-cutting awl for working ropes. A lanyard loop is also available.

Its features facilitate on-board maneuvers and meet the demands of the marine environment, making it the ideal adventure companion.

Intended Use: Sports / Boating / Water Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 121mm.
Total length: 210 mm.
Thickness when closed: 20 mm.
Weight: 80 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle, stainless steel knot-cutting awl, and blade with a carabiner opener/rotator

Designed for boating and built for performance at sea, the No. 09 Ocean is an indispensable companion; inspired by the depths of the ocean and the horizon, the No. 09 Ocean Red is designed for quick identification on board.

Designed for boating and sailing, it combines durability, effectiveness, and safety.

It features a 9 cm semi-serrated stainless steel blade equipped with a blade extractor, and a polyamide handle resistant to water and extreme temperatures. The handle features a whistle and a hardened steel knot-cutting awl for working ropes. A lanyard loop is also available.

Its features facilitate on-board maneuvers and meet the demands of the marine environment, making it the ideal adventure companion.

Intended Use: Sports / Boating / Water Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 121mm.
Total length: 210 mm.
Thickness when closed: 20 mm.
Weight: 80 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle, stainless steel knot-cutting awl, and blade with a carabiner opener/rotator

The No. 08 Horizon is a durable pocket knife designed for all multisport activities. With its understated design and natural inspiration, the No. 08 Horizon Khaki is the ideal companion for all your outdoor adventures.

Sturdy and practical, it is designed for outdoor enthusiasts looking for a versatile tool suitable for all their activities: hiking, camping, mountain biking, or canoeing.

The N°08 Horizon Khaki features an 8 cm smooth stainless steel blade characterized by high corrosion resistance and excellent cutting quality. Its polyamide handle, reinforced with 30% fiberglass, is water-resistant and withstands extreme temperatures. It features a built-in 110dB emergency whistle and a lanyard hole for hanging the knife wherever you like.

Intended use: Hiking / Sports

Production type: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Polyamide with anti-slip treatment
Blade length: 85mm.
Blade thickness: 2.5 mm.
Closed length: 110 mm.
Total length: 190 mm.
Closed thickness: 20 mm.
Weight: 63 g.
Closure: ViroBloc
Packaging: Cardboard and plastic blister pack
Notes: equipped with a 110 dB emergency whistle

The No. 08 Champignon model is available in a black walnut version for an elegant and refined mushroom-picking experience.

This classic Opinel features a comfortable black walnut handle, accented with an orange Alcantara cord. It features an 8 cm curved stainless steel blade to facilitate harvesting, with a scraper on the back for cleaning mushrooms.

The natural bristle brush integrated at the end of the handle allows for easy dusting: the ideal tool for efficient and thorough harvesting.

This pocket knife comes in an elegant wooden case with a plexiglass window. 

 

Intended Use: Mushroom Picking

Production Type: Industrial
Country of Origin: France
Blade: Sandvik 12C27 Stainless Steel
Blade Finish: Satin
Handle: Black Walnut Wood
Blade Length: 70mm
Blade Thickness: 2mm
Closed Length: 125mm
Total length: 200mm
Weight: 95g
Closure: Virobloc safety ring
Packaging: Wooden box with synthetic glass
Notes: Supplied with a high-visibility Alcantara lanyard - Fixed rear brush, made of natural bristles

The Bon Appétit Bistrot table knife set, made in France, includes 4 knives in different colors: Rouge, Sapin, Nuage, and Bleu, inspired by the spirit of French brasseries.

Thanks to the 11 cm smooth stainless steel blade and the PEFC-certified ash wood handle, they guarantee a perfect cut and a comfortable grip. Useful in everyday life, their bright, sunny colors will bring energy and freshness to your table.

CARE
Hand washing is recommended.

Total length: 220 mm
Blade length: 110 mm
Blade: Sandvik 12C27 stainless steel
Handle: Treated and varnished wood
Packaging: 100% cardboard

The Bon Appétit Agrumes table knife set, made in France, includes 4 knives in different colors: Brick, Yellow, Mustard, and Pumpkin, all in vibrant hues.

Thanks to the 11 cm smooth stainless steel blade and the PEFC-certified ash wood handle, they guarantee a perfect cut and a comfortable grip. Useful in everyday life, their bright, sunny colors will bring energy and freshness to your table.

CARE
Hand washing is recommended.

Total length: 220 mm
Blade length: 110 mm
Blade: Sandvik 12C27 stainless steel
Handle: Treated and varnished wood
Packaging: 100% cardboard

Set of 6 Laguiole en Aubrac Steak House table knives, made entirely of stainless steel. A simple, practical, and durable design, ideal for everyday use.

Technical Specifications:

Blade: stainless steel
Handle: stainless steel
Blade length: 120 mm
Blade thickness: 3 mm
Total length: 230 mm
Weight: 102 g (each)
Type: table knives / steak knives
Packaging: cardboard tube with manufacturer’s logos

The Laguiole en Aubrac Steak House series is designed to offer sturdiness, functionality, and practicality, while maintaining the brand’s identity in a more minimalist version.

The knives feature an all-stainless-steel construction, ideal for ensuring strength, ease of maintenance, and durability, even with frequent use.

To keep production costs down, this line features simpler, more functional finishes, with a stylized Laguiole fly and craftsmanship reduced to the essentials, without compromising on build quality.

The branded cardboard tube packaging reflects the practical spirit of the series: less geared toward formal gift-giving and more suited to everyday use, even in convivial and informal settings.

An ideal choice for those seeking reliable, durable knives with a clean design, perfect for meat and grilling.

A prestigious set of 6 Laguiole en Aubrac table knives with solid stainless steel handles. Handcrafted in France.

Technical Specifications:

Blade: 12C27 Stainless Steel
Handle: solid stainless steel
Blade length: 120 mm
Blade thickness: 3 mm
Total length: 230 mm
Weight: 102 g (each)
Type: table knives
Packaging: elegant wooden box

These Laguiole en Aubrac table knives combine elegance and functionality, making them ideal for both everyday use and fine dining. The 12C27 stainless steel blade ensures a precise and long-lasting cut, perfect for meat and other dishes.

The solid stainless steel handle offers a modern design, a secure grip, and exceptional durability, as well as easy maintenance.

Each piece is handcrafted in France, in the village of Laguiole, following local artisanal traditions. The attention to detail and hand-finished touches make each knife unique.

The unmistakable Laguiole bee, a distinctive symbol engraved on the back, adds a touch of authenticity and prestige to every piece in the set.

A perfect set for those seeking artisanal quality, style, and reliability right at their table.

A prestigious set of 6 Laguiole en Aubrac table knives with solid stainless steel handles. Handcrafted in France.

Technical Specifications:

Blade: 12C27 Stainless Steel
Handle: solid stainless steel
Blade length: 120 mm
Blade thickness: 3 mm
Total length: 230 mm
Weight: 102 g (each)
Type: table knives
Packaging: elegant wooden box

These Laguiole en Aubrac table knives combine elegance and functionality, making them ideal for both everyday use and fine dining. The 12C27 stainless steel blade ensures a precise and long-lasting cut, perfect for meat and other dishes.

The solid stainless steel handle offers a modern design, a secure grip, and exceptional durability, as well as easy maintenance.

Each piece is handcrafted in France, in the village of Laguiole, following local artisanal traditions. The attention to detail and hand-finished touches make each knife unique.

The unmistakable Laguiole bee, a distinctive symbol engraved on the back, adds a touch of authenticity and prestige to every piece in the set.

A perfect set for those seeking artisanal quality, style, and reliability right at their table.

The internationally acclaimed Laguiole en Aubrac forge is a benchmark for traditional French craftsmanship.

This knife is dedicated to Camembert and is sold in the round wooden box typical of this world-famous cheese.

Intended use: Regional/Collectible

Production type: Handcrafted
Blade: 12C27 stainless steel
Country of origin: France
Handle: Ebony wood
Blade length: 80mm.
Blade thickness: 2.6 mm.
Closed length: 110 mm.
Total length: 193 mm.
Weight: 88 g.
Closure: rear spring lock
Notes: sold in a round wooden box, modeled after the box of the famous French Camembert cheese

Atlas goes “Army”! Once again, the proven Boker Plus Atlas revitalizes the EDC world with a fresh take: a two-handed knife with a minimalist design that retains the same expressive power and timeless appeal as other models in the same family.

Available in a limited edition, exclusively at select retailers, this Boker Plus Atlas OD Green version combines rugged reliability, understated elegance, and surprising lightness. As an EDC folding knife, it features a full stainless steel handle with a military green Cerakote coating, ideal for everyday use. The minimalist construction ensures high durability without adding unnecessary bulk.

The Drop Point blade, made from Swedish 12C27 steel, offers excellent corrosion resistance, low wear, and ease of sharpening. To accentuate its tactical and discreet look, the blade is finished with a scratch-resistant PVD coating that also reduces light reflections.

The Atlas OD Green retains the proven opening system of its predecessors: thanks to the nail nick and slipjoint mechanism, the blade opens smoothly and closes securely. The black details (lanyard hole, clip, screws, and rivets) complete the military-inspired aesthetic, making this knife perfect for both everyday use and a bold style.

Production type: Industrial
Country of manufacture: China
Blade: Sandvik 12C27 stainless steel with Black PVD coating
Handle: stainless steel with Cerakote coating
Blade length: 75mm.
Blade thickness: 2.3mm.
Overall length: 168mm.
Weight: 49g.
Clip: Black PVD-coated stainless steel, removable
Packaging: cardboard box with manufacturer’s logos
Notes: limited edition available exclusively at select retailers

Amberg is a collection of outdoor knives designed with a specific purpose in mind: to offer reliability, balance, and durability. Every detail has been carefully considered, from the handle geometry to the choice of materials, right down to the harmonious, nature-inspired color schemes.

Designed to accompany you on every outdoor adventure—from bushcraft to hiking, camping to fishing, hunting to cooking over a fire—the Amberg series offers the right knife for every need. A refined design combines with reliable performance, creating a tool that is intuitive to use and can be counted on, whether for everyday adventures or longer journeys through forests and mountains.

The Amberg knife is synonymous with strength, precision, and versatility: sturdy enough for the toughest tasks, yet agile enough for delicate activities and food preparation. The Scandi grind ensures a durable, long-lasting edge that’s easy to maintain even in the field, while the fire-starter-compatible spine makes lighting a fire practical and efficient.

The ergonomic handle, with an optimized profile and lab-tested non-slip texture, ensures a firm grip in all conditions, even with wet, cold, or greasy hands. The three-component construction combines a sturdy PP core with an outer TPE coating, offering the perfect balance of durability, comfort, and control.

Rounding it all out is the new Click-On sheath: durable, ambidextrous, and modular, designed for safe and flexible carry. Compatible with TEK-LOK accessories and MOLLE systems, it allows for various configurations, adapting to your needs in any situation.

 

Intended use: Hiking / Bushcraft / Camping / Hunting & Fishing

Production type: industrial
Country of manufacture: Sweden
Blade: Recycled Swedish 12C27 stainless steel, 58 HRC
Handle: Thermoplastic with PP core and TPE coating
Blade length: 109 mm.
Blade thickness: 3.2 mm.
Overall length: 231 mm.
Weight: 168 g.
Sheath: Thermoplastic with click-on system, ambidextrous, modular, and compatible with MOLLE and TEK-LOK
Notes: Scandi-style edge and blade spine compatible with a fire starter

PREVIOUSLY PURCHASED KNIFE, FROM PRIVATE COLLECTION
* Type: new knife, never used, but without sheath and trousseau - a handcrafted kydex sheath was specially made to accompany it during the sale phase
* Condition: 90s version, same as new, never used
* Commercially available Discontinued in this configuration
* Sharpening: Factory
* Signs on blade: None
* Signs on handle: Minimum signs given by time
* Box: -
* Sheath: Kydex, handcrafted and custom made
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

The "Recon Tanto" is an iconic knife produced by Cold Steel, known for its reliability and robustness. First introduced in 1988, the model was designed to be a combat and survival knife, with a design that combines functionality and durability.

Over the years, the "Recon Tanto" has been improved and updated, but has retained its distinctive character and functionality. It has become one of Cold Steel's most recognizable models, thanks to its ability to combine traditional design with modern innovation.

Intended use: collection / tactical / sports

Type of production: Industrial
Country of production: Japan
Blade: stainless steel AUS-8A
Blade treatment: painting
Grip: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Handcrafted in kydex, specially made for this knife
Packaging: -
Note: New knife from the 90s, never used, previously purchased, from a private collection

In the forests of Orsa, pink sandstone has been quarried for over a thousand years, refining tools and shaping craftsmanship through the generations. Here, a tradition of skill and perseverance was born, where stone met steel and forged knowledge that lasts a lifetime.

The Color of the Year 2026, Orsa Sandstone and Dala Red, adorns the compact Eldris outdoor knife. The colors are inspired by the light, natural shade of sandstone meeting classic Dala red, a tribute to Morakniv's heritage and origins.

Intended use: Neck Knife / Backup

Production type: industrial
Country of production: Sweden
Blade: Sandvik 12C27 stainless steel 57/58HRC
Handle: ABS and non-slip rubber
Blade length: 53mm.
Blade thickness: 2mm.
Total length: 143mm.
Balance: rearward
Weight: 80g.
Sheath: ABS
Notes: Limited edition for 2026 in Dala Red and Orsa Sandstone colors

Asile is a French artist and illustrator. Her work is a celebration of kindness, with a universe populated by colorful fauna and flora, and happy individuals. 

The N°08 Cosmos Asile features two different but equal characters. Here there is no duality, but a pairing, a balance. The moon on which they sit becomes a space for encounter and delicacy, between dream and reality. Three birds carry stars around them, as if they were redrawing a constellation. 

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8200 pieces, numbered blades.

 

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: satin
Handle: hornbeam wood, with 3D sublimation decoration
Blade length: 85mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Dalkhafine is a multifaceted French artist who works in various disciplines: illustration, motion design, screen printing, painting, clothing, and much more. His world is colorful and largely inspired by nature.

The N°08 Cosmos Dalkhafine depicts the encounter between earthly power and cosmic energy: the strong and majestic tiger bows before the mermaid, whose head shines like the sun. The sun represents the sovereign star that watches over the universe, just as the mermaid watches over the moon.

The pocket knife has a PEFC hornbeam handle with sublimation decoration and an 8.5 cm stainless steel blade. It comes with a box, which echoes the motifs of the knife, and a postcard.

Limited edition of 8,200 pieces, numbered blades.

 

Intended use: Collection

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade finish: satin
Handle: hornbeam wood, with 3D sublimation decoration
Blade length: 85 mm.
Blade thickness: 1.5 mm.
Closed length: 107 mm.
Total length: 190 mm.
Weight: 42 g.
Closure: Viro-Block
Packaging: Cardboard box with Opinel logos

Uncompromising versatility and robustness - The ideal companion for those who approach hunting as a discipline and technique.
The VENATUS F Nitrogen Black Satin with black G10 handle is designed to tackle every stage of the hunt. The 12 cm satin-finished blade, with spear point profile and counter-grinding, is made of Nitrogen steel, ideal for humid environments and prolonged use. The technical and resistant G10 handle guarantees control and durability even in the most difficult conditions.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, made of Nitrogen steel
Blade finish: Satin
Handle: G10
Blade length: 119 mm.
Blade thickness: 3.8 mm.
Total length: 248 mm.
Weight: 235 g.
Sheath: leather, ambidextrous, modular, made in Italy
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Compact, balanced, decisive. - Perfect for the modern hunter who accepts no compromises.
The VENATUS S Nitrogen Black Satin with black G10 handle is the ideal tool for finishing and precision work while hunting. The 9 cm blade in satin-finished Nitrogen steel guarantees a clean cut, resistance to oxidation, and easy resharpening, even in harsh environmental conditions. The black G10 handle ensures a firm and reliable grip, designed for technical and intensive use.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, Nitrogen steel
Blade finish: Satin
Handle: G10
Blade length: 90mm.
Blade thickness: 3.8mm.
Total length: 220mm.
Weight: 235g.
Sheath: leather, ambidextrous, modular, made in Italy
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Natural Precision - A knife that becomes an extension of the hand and spirit.

The VENATUS S Nitrogen Satin with walnut wood handle combines performance and tradition. Its 9 cm satin-finished Nitrogen steel blade is ideal for detailed work: clean cuts, controlled movements, maximum sensitivity. The walnut handle adds a warm and authentic touch, for those seeking a deep connection with the essence of hunting.

 

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, Nitrogen steel
Blade finish: Satin
Handle: Walnut wood
Blade length: 90mm.
Blade thickness: 3.8mm.
Total length: 220mm.
Weight: 180g.
Sheath: leather, ambidextrous, modular, made in Italy
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

VIPERA is born from the fusion between the tactical and survival worlds, combining speed of use, robustness, and precision in a knife weighing less than 100 grams. Equipped with an elongated drop-point blade with a full flat grind and narrow edge, it offers penetration, smooth cutting, and hardness up to 61 HRC. It is available in two high-performance steels, both with excellent edge retention and corrosion resistance. The ergonomic handle with integrated guard ensures maximum control in all conditions, while the ASPIS nylon sheath allows for stable and versatile carrying.

VIPERA Nitrogen (Stone Washed, HCS, Ranger Green)
This variant is designed for outdoor, survival, bushcraft, and prepping users: areas where reliability in the field, weather resistance, and maintainability are essential. Nitrogen steel maintains excellent edge retention, combined with excellent rust resistance and, above all, greater ease of resharpening compared to M390. The increased resilience makes these models more tolerant to the abuse typical of a field environment.

Technical insight into nitrogen-added steels
Nitrogen steels, or nitrogen-added steels, are alloys in which nitrogen is used as an alloying element instead of, or in addition to, carbon. Although nitrogen is less effective than carbon in hardening the martensitic matrix, it has the advantage of forming stable compounds with chromium to a much lesser extent. This allows a greater amount of chromium to be kept in solid solution, improving corrosion resistance. In addition, nitrogen contributes to the hardness and stability of the structure, giving these steels a good balance between hardness, toughness, and corrosion resistance. Compared to traditional martensitic steels, nitrogen steels can therefore offer a better combination of mechanical properties and resistance to chemicals, while maintaining good workability and sharpenability characteristics.

 

Intended use: Outdoor / Utility / Bushcraft

Type of production: Industrial
Country of production: Italy
Blade: nitrogen-alloyed stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 116mm.
Blade thickness: 4 mm.
Total length: 236 mm.
Weight: 95 g.
Sheath: ASPIS nylon with two multi-position clips, M.O.L.L.E. compatible.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

VIPERA is born from the fusion between the tactical and survival worlds, combining speed of use, robustness, and precision in a knife weighing less than 100 grams. Equipped with an elongated drop-point blade with a full flat grind and narrow edge, it offers penetration, smooth cutting, and hardness up to 61 HRC. It is available in two high-performance steels, both with excellent edge retention and corrosion resistance. The ergonomic handle with integrated guard ensures maximum control in all conditions, while the ASPIS nylon sheath allows for stable and versatile carrying.

VIPERA Nitrogen (Stone Washed, HCS, Ranger Green)
This variant is designed for outdoor, survival, bushcraft, and prepping users: areas where reliability in the field, weather resistance, and maintainability are essential. Nitrogen steel maintains excellent edge retention, combined with excellent rust resistance and, above all, greater ease of resharpening compared to M390. The increased resilience makes these models more tolerant to the abuse typical of a field environment.

Technical insight into nitrogen-added steels
Nitrogen steels, or nitrogen-added steels, are alloys in which nitrogen is used as an alloying element instead of, or in addition to, carbon. Although nitrogen is less effective than carbon in hardening the martensitic matrix, it has the advantage of forming stable compounds with chromium to a much lesser extent. This allows a greater amount of chromium to be kept in solid solution, improving corrosion resistance. In addition, nitrogen contributes to the hardness and stability of the structure, giving these steels a good balance between hardness, toughness, and corrosion resistance. Compared to traditional martensitic steels, nitrogen steels can therefore offer a better combination of mechanical properties and resistance to chemicals, while maintaining good workability and sharpenability characteristics.

 

Intended use: Outdoor / Utility / Bushcraft

Type of production: Industrial
Country of production: Italy
Blade: nitrogen-alloyed stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 116mm.
Blade thickness: 4 mm.
Total length: 236 mm.
Weight: 95 g.
Sheath: ASPIS nylon with two multi-position clips, M.O.L.L.E. compatible.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: Present
* Manuals, Certificates, and Warranties: /
* Checked and certified by our in-house laboratory

 

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Finland
Blade: Sandvik 12C27 stainless steel
Blade finish: Mirror polished
Handle: Non-slip rubber
Blade length: 110mm.
Blade thickness: 2.5mm.
Total length: 230mm.
Weight: 160g.
Sheath: leather, belt-mounted
Packaging: -
Notes: previously purchased knife from a private collection

The Laguiole Old Time / Autrefois in buffalo horn is a handcrafted folding knife that celebrates French tradition with elegance and authenticity. Handmade in France, it represents a perfect balance between classic aesthetics and contemporary functionality, designed for enthusiasts, collectors, and lovers of authentic objects.

The 120 mm long, 3 mm thick Sandvik 12C27 stainless steel blade offers good cutting performance and corrosion resistance. The Slip Joint closure is accompanied by a hand-finished rear spring, a guarantee of craftsmanship and durability.

The buffalo horn handle, a natural and fascinating material, gives each piece a unique look and a warm feel to the touch. Lightweight and balanced, weighing 80 grams and with a total length of 257 mm, this knife combines practicality, style, and tradition, ideal for both sporting use and as a collector's item.

 

Intended use: Collection/Sporting

Type of production: Handcrafted
Blade: 12C27 stainless steel
Country of production: France
Handle: Buffalo horn
Blade length: 120 mm.
Blade thickness: 3 mm.
Closed length: 137 mm.
Total length: 257 mm.
Weight: 80 g.
Closure: Slip Joint
Notes: Handcrafted rear retention spring

WithArmour Mercenary-TN - Fixed Tactical Heavy Duty Knife

The Mercenary-TN is a full tang fixed blade knife designed for heavy duty outdoor use. Featuring a sturdy 12C27 steel blade with Soldier Grine (Saber + Scandi) sharpening, ergonomic Micarta and G10 handle, and complete equipment with Kydex sheath and fire starter, this model combines extreme functionality with craftsmanship in detail. Ideal for those seeking reliability, solidity and professional performance in the field.

 

Intended Use: Tactical / Sporting

Production Type: Industrial
Country of Production: China
Blade: 12C27 stainless steel with Soldier Grine sharpening (Saber + Scandi)
Blade Finish: Dual Tone - Stonewashed and Satin-finished
Handle: Micarta with G10 spacers
Blade Length: 137mm.
Blade thickness: 5.5mm.
Total length: 278mm.
Weight: 390g.
Sheath: thermoformed kydex with belt loop for vertical carry. With dedicated compartment for tinder (included)
Packaging: cardboard box with manufacturer's logos, certificates and warranty
Notes: -

WithArmour Mercenary-BK - Tactical Fixed Heavy Duty Knife

WithArmour's Mercenary-BK is a fixed tactical knife designed to deliver exceptional performance in emergency, outdoor and self-defense situations. With a sturdy blade and ergonomic handle, it is ideal for those seeking reliability, power and precision

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of manufacture: China
Blade: 12C27 stainless steel with full flat asymmetrical sharpening on the left side
Blade Finish: Dual Tone - Matte Black Titanium Coating and Satin finish
Handle: Micarta with G10 spacers
Blade Length: 137mm.
Blade Thickness: 5.5mm.
Total length: 278mm.
Weight: 341g.
Sheath: thermoformed kydex with belt loop for vertical carry. With dedicated compartment for diamond sharpener (included)
Packaging: cardboard box with manufacturer's logos, certificates and warranty
Notes: -

Intended use: Collection
Production type: Handmade
Country of production: France
Blade: Sandvik stainless steel
Blade finish: Satin
Handle: Ebony and turquoise inlay with golden inserts
Blade length: 100mm
Blade thickness: 3mm
Closed length: 107mm
Total length: 207mm
Closed thickness: 12mm
Weight: 90g
Locking mechanism: Slipjoint
Clip: None
Packaging: Gift box and certificate
Notes: Hand-guilloché work, handle with stone and brass inlay, unique piece

Intended use: Collection
Production type: Handcrafted
Country of manufacture: France
Blade: Sandvik stainless steel
Blade finish: Brushed satin
Handle material: Bogwood
Blade length: 100mm
Blade thickness: 3mm
Closed length: 107mm
Total length: 207mm
Closed thickness: 12mm
Weight: 90g
Locking system: Slipjoint
Clip: None
Packaging: Gift box with certificate of authenticity
Notes: Brushed stainless steel bolster, handle made from ancient natural fossil wood, entirely handmade

After skiing, cycling and hiking...
Climbing is now engraved on the handle of the traditional N. 08 pocket knife! 

The N. 08 Climbing has an 8.5 cm stainless steel blade with an excellent cutting edge. The handle is made of PEFC-certified Beech, painted and engraved.  The Virobloc safety ring allows the blade to be locked in the open or closed position. 

Intended use: Daily use, collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin finish
Handle: Engraved beech wood
Blade length: 85 mm
Blade thickness: 1.7 mm
Length closed: 107 mm
Total length: 190 mm
Thickness when closed: 10.5 mm
Weight: 45 g
Closure: Virobloc safety ring
Clip: -
Packaging: -
Notes: Painted handle for additional protection from dirt and moisture

The iconic knife of the Alps meets the totem animal of our mountains! 
The No. 08 Marmot pocket knife has an 8.5 cm stainless steel blade. The handle is made of varnished and engraved oak. The Virobloc double safety loop locks the blade in the open or closed position. 

A must-have for nature lovers!

Intended use: Daily use, collection
Type of production: Industrial
Country of manufacture: France
Blade: Sandvik 12C27 stainless steel
Blade finish: Satin
Handle: Oak wood with engraving
Blade length: 85 mm
Blade thickness: 1.7 mm
Length closed: 107 mm
Total length: 190 mm
Thickness when closed: 10.5 mm
Weight: 45 g
Closure: Virobloc safety ring
Clip: -
Packaging: -
Notes: Painted handle for additional protection from dirt and moisture

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Uncompromising elegance
With its ebony handle, full-bodied and velvety to the touch, néo6 stands out for its refinement and comfort. A prestigious and functional pocket knife with an essential design and attention to detail.

The 7 cm stainless steel blade, with rounded tip, offers precision and safety in daily use. The discreet and practical natural leather strap completes it with a touch of elegance.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: African Ebony Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos

Néo6 - The pocket knife for everyday use
Compact, lightweight and sturdy, néo6 is designed to accompany you everywhere with practicality and style.

The new opiflex® system makes it easy to open and close the blade, offering a secure and intuitive grip without locking. At only 9.5 cm when closed and weighing 25 g, it fits easily in your pocket and is ready to use for small daily tasks.

Made in France from durable and recyclable materials, néo6 encapsulates the essence of Opinel design in a modern and functional format.

Mediterranean style, authentic soul
The Italian olive wood handle gives néo6 a warm and sunny character. Each pocketknife is a unique piece, thanks to the natural wood grain that enhances its authenticity. The 7-cm stainless steel blade with rounded tip provides safety and versatility in daily activities.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: France
Blade: Martensitic stainless steel 55-57 HRC
Blade Finish: Satin
Handle: Italian Olive Wood
Blade Length: 70mm
Length closed: 95mm
Total Length: 165mm
Weight: 25g
Closure: Opiflex security system (SlipJoint)
Wrist strap: leather
Packaging: cardboard box with Opinel logos