KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.

In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.

Intended Use: Sports / Collectible

Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collection

The KA-BAR George Roscoe is a surprisingly sturdy and easy-to-handle daily carry fixed-blade knife designed by award-winning custom knifemaker Les George. Made entirely in the USA from 425 high carbon stainless steel, it is designed to offer reliable performance and great strength in everyday use.

The compact 46mm Wharncliffe blade and full-tang construction provide structural strength in a total length of just 105.4mm. Its small size and low weight (68g.) make it easy to carry, discreet and quick to use. The knife comes with a durable Celcon sheath with the Les George logo, designed to ensure safe retention and instant access.

The KA-BAR George Roscoe is therefore a compact yet extremely effective EDC, built in the USA to offer robustness and functionality well beyond its small size.

Intended use: Tactical / EDC

Type of production: industrial
Country of production: USA
Blade: full tang in 425 stainless steel
Blade finish: Stonewashed
Handle: stainless steel 425
Blade length: 46mm.
Blade thickness: 5.5mm.
Total length: 105mm.
Weight: 68g.
Sheath: in Celcon, neck, with loops that can be used on a belt
Note: Design by Les George

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.

Intended Use: Sporting / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: China
Blade: 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: TPR (Thermoplastic Rubber)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 241mm.
Weight: 184g.
Sheath: belt, for vertical port, in TPU (Thermoplastic Polyurethane)
Packaging: Cardboard box with United Cutlery logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: China
Blade: full tang in 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: FRN (Fiberglass and Nylon)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 260mm.
Weight: 340g.
Sheath: belt, for vertical port, in polymers and nylon
Packaging: Cardboard box with United Cutlery logos
Note: -

Type of production: Industrial
Country of production: China
Blade: stainless steel 2Cr13
Blade treatment: Black Oxide Coating
Handle: Nylon and Glass Fiber
Blade length: 98.5mm. (only sharp) 197mm (with hammer)
Blade thickness: 10mm. In the central point
Total length: 393mm
Weight: 860g.
Sheath: TPR blade cover (thermoplastic rubber)
Packaging: cardboard box with United Cutlery logos
Note: -

Type of production: Industrial
Lama production: China
Blade: stainless steel 2Cr13
Blade treatment: Painting
Handle: Nylon and Glass Fiber
Blade length: 18 cm
Blade thickness: 10mm. In the central point
Length closed: -
Total length: 22.5 cm
Thickness when closed: -
Balancing: -
Weight: 355g.
Closure: -
Clip: -
Sheath: Nylon
Packaging: cardboard box with United Cutlery logos
Note: -

Steel: 2Cr13
Length .: 8.1 cm.
Weight: 17g.

functions:
spoon - fork - bottle opener - can opener - Flat screwdriver - wrench 1/4 "- carabiner

Steel: 2Cr13
Length .: 8.1 cm.
Weight: 17g.

functions:
spoon - fork - bottle opener - can opener - Flat screwdriver - wrench 1/4 "- carabiner