The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

With thirty years of experience in designing professional knives, Extrema Ratio has developed a model designed for those seeking an everyday carry tool that combines functionality, lightness, and attention to detail.

The minimalist profile, clean lines, and light weight are not merely aesthetic choices for their own sake, but the result of a design focused on efficiency. Every element serves a specific purpose. Nothing has been added merely to impress; nothing is there without a reason.

AERO is built using materials selected to ensure reliability in daily use and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade, prized for its corrosion resistance, edge retention, and ease of resharpening.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Nitrogen steel
Blade Finish: MIL-C-13924 burnishing
Handle: Stainless steel scales with anodized anticorodal aluminum grip
Blade Length: 69mm.
Blade thickness: 2.3 mm.
Overall length: 173 mm.
Weight: 92 g.
Lock type: Liner Lock
Clip: -
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Compact, lightweight, and surprisingly versatile, the Leatherman Micra is the multitool designed to accompany you every day without taking up space. Thanks to its pocket-sized format and integrated keyring, it’s always ready to handle small daily tasks, from cutting tags and strings to adjusting screws or personal grooming.

Made from 420HC stainless steel, it combines durability and practicality in a minimalist yet functional design. The famous spring-loaded scissors ensure precise and comfortable cuts, while the other integrated tools—including screwdrivers, a file, tweezers, and a bottle opener—make the Micra a reliable companion for work, travel, and leisure.

Weighing just 51 grams, it offers all the Leatherman quality in a discreet, elegant tool that’s always within reach.

Included tools:
01 420HC steel knife
02 Spring-loaded scissors
03 Flathead/Phillips screwdriver
04 Ruler (12 cm)
05 Nail cleaner
06 Tweezers
07 Bottle opener
08 Nail file
09 Medium screwdriver
10 Extra-small screwdriver

COMPACT DESIGN
Micra packs all the reliability of Leatherman into an ultra-compact multitool designed for everyday use. Lightweight, practical, and easy to carry, it clips conveniently to a keychain, bag, or backpack, so it’s always within reach when you need it.

EVERYDAY PRACTICALITY
The iconic spring-loaded scissors ensure precise and comfortable cuts, perfect for small daily tasks like opening packages, cutting strings, or tidying up details. The integrated tools, including screwdrivers, a nail file, and tweezers, make Micra® ideal for quick fixes on the go, while traveling, or at the office.

TECHNICAL SPECIFICATIONS
* Weight: 51 g
* Length when closed: 63.5 mm
* Length when open: 106.7 mm
* Width: 19.1 mm
* Overall thickness: 9.4 mm
* Main blade length: 40.6 mm
* Blade material: 420HC stainless steel
* Blade hardness: 55–59 HRC
* Blade lock: No
* Frame material: 420 stainless steel
* Frame color: Silver
* Tool material: 420 stainless steel
* Tool color: Silver
* Tool finish: Polished
* Tool lock: No

Compact, lightweight, and surprisingly versatile, the Leatherman Micra is the multitool designed to accompany you every day without taking up space. Thanks to its pocket-sized format and integrated keyring, it’s always ready to handle small daily tasks, from cutting tags and strings to adjusting screws or personal grooming.

Made from 420HC stainless steel, it combines durability and practicality in a minimalist yet functional design. The famous spring-loaded scissors ensure precise and comfortable cuts, while the other integrated tools—including screwdrivers, a file, tweezers, and a bottle opener—make the Micra a reliable companion for work, travel, and leisure.

Weighing just 51 grams, it offers all the Leatherman quality in a discreet, elegant tool that’s always within reach.

Included tools:
01 420HC steel knife
02 Spring-loaded scissors
03 Flathead/Phillips screwdriver
04 Ruler (12 cm)
05 Nail cleaner
06 Tweezers
07 Bottle opener
08 Nail file
09 Medium screwdriver
10 Extra-small screwdriver

COMPACT DESIGN
Micra packs all the reliability of Leatherman into an ultra-compact multitool designed for everyday use. Lightweight, practical, and easy to carry, it clips conveniently to your keychain, bag, or backpack, so it’s always within reach when you need it.

EVERYDAY PRACTICALITY
The iconic spring-loaded scissors ensure precise and comfortable cuts, perfect for small daily tasks like opening packages, cutting strings, or tidying up details. The integrated tools, including screwdrivers, a nail file, and tweezers, make Micra® ideal for quick fixes on the go, while traveling, or at the office.

TECHNICAL SPECIFICATIONS
* Weight: 51 g
* Length when closed: 63.5 mm
* Length when open: 106.7 mm
* Width: 19.1 mm
* Overall thickness: 9.4 mm
* Main blade length: 40.6 mm
* Blade material: 420HC stainless steel
* Blade hardness: 55–59 HRC
* Blade lock: No
* Frame material: 420 stainless steel
* Frame color: Black
* Tool material: 420 stainless steel
* Tool color: Silver
* Tool finish: Polished
* Tool lock: No

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: Stonewashed
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

SATRE F è un chiudibile compatto pensato per uso quotidiano. Mantiene l’impostazione robusta della linea SATRE in un formato tascabile, con ingombri ridotti e portabilità reale. Sta in tasca senza dare fastidio, ma quando serve è pronto.

Apertura flipper rapida e controllabile con una mano. Struttura con doppia cartella in acciaio e blocco Liner-Lock: rigido, affidabile, senza giochi. La clip deep carry lo rende discreto in tasca. La fresatura sulla guancetta non è solo estetica: permette di identificare subito la variante anche da chiuso.

Le versioni in Böhler N690Co (Black, Stone Washed) puntano su resistenza all’usura e buona tenuta del filo, con manutenzione semplice. Le varianti in acciaio Nitrogen (Periwinkle, Orange, Yellow) privilegiano la resistenza alla corrosione, ideali per ambienti umidi o uso intensivo all’aperto. La versione Outdoor Nitrogen è la più orientata all’impiego sul campo.

Intended use: Sport / EDC

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: MIL-C-13924 burnishing
Handle: Stainless steel liners with anodized Anticorodal handle scales
Blade length: 72 mm
Blade thickness: 3 mm
Overall length: 174 mm
Weight: 98 g
Locking mechanism: Liner Lock
Pocket clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Flipper opening system

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Inspired by the Pocket Survival Tool, Tim Leatherman's first multi-purpose tool, Bond combines classic design with the tools needed to perform everyday tasks.

Weighing just 164 grams, this lightweight tool offers 14 essential tools, including pliers, a durable 420HC steel blade, and a set of standard screwdrivers. Bond's handles are contoured for a comfortable grip during use.

TOOLS INCLUDED
01 Flat nose pliers
02 Regular pliers
03 Wire cutters
04 Wire strippers
05 Wire stripper
06 420HC steel blade
07 Awl
08 Can opener
09 Bottle opener
10 Wood/metal file
11 Phillips screwdriver
12 Medium screwdriver
13 Small screwdriver
14 Ruler (19 cm)

ICONIC DESIGN
Bond pays homage to the original Leatherman PST from the 1990s, offering ease of use, versatility, and reliability in a tool just over 10 cm long and weighing 164 grams.

WHAT YOU NEED OUTDOORS
Solve problems away from home and in nature with all the essential tools you need. Plus, it's easy to carry in a backpack or pocket.

TECHNICAL DATA
* Weight: 176.05 g
* Length when closed: 101.6 mm
* Length when tool is open: 165.1 mm
* Width: 30.7 mm
* Overall thickness: 14.2 mm
* Main blade length: 71.1 mm
* Blade composition: 420HC stainless steel
* Blade hardness: 55–59 HRC
* Blade lock: No
* Frame composition: 420 stainless steel
* Frame color: Silver
* Tool composition: Stainless steel
* Tool color: Silver
* Tool finish: Microbead blasting
* Tool lock: No
* Attachment composition: Stainless steel
* Attachment color: Silver

Uncompromising versatility and robustness - The ideal companion for those who approach hunting as a discipline and technique.
The VENATUS F Nitrogen Black Satin with black G10 handle is designed to tackle every stage of the hunt. The 12 cm satin-finished blade, with spear point profile and counter-grinding, is made of Nitrogen steel, ideal for humid environments and prolonged use. The technical and resistant G10 handle guarantees control and durability even in the most difficult conditions.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, made of Nitrogen steel
Blade finish: Satin
Handle: G10
Blade length: 119 mm.
Blade thickness: 3.8 mm.
Total length: 248 mm.
Weight: 235 g.
Sheath: leather, ambidextrous, modular, made in Italy
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Compact, balanced, decisive. - Perfect for the modern hunter who accepts no compromises.
The VENATUS S Nitrogen Black Satin with black G10 handle is the ideal tool for finishing and precision work while hunting. The 9 cm blade in satin-finished Nitrogen steel guarantees a clean cut, resistance to oxidation, and easy resharpening, even in harsh environmental conditions. The black G10 handle ensures a firm and reliable grip, designed for technical and intensive use.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, Nitrogen steel
Blade finish: Satin
Handle: G10
Blade length: 90mm.
Blade thickness: 3.8mm.
Total length: 220mm.
Weight: 235g.
Sheath: leather, ambidextrous, modular, made in Italy
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Natural Precision - A knife that becomes an extension of the hand and spirit.

The VENATUS S Nitrogen Satin with walnut wood handle combines performance and tradition. Its 9 cm satin-finished Nitrogen steel blade is ideal for detailed work: clean cuts, controlled movements, maximum sensitivity. The walnut handle adds a warm and authentic touch, for those seeking a deep connection with the essence of hunting.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, Nitrogen steel
Blade finish: Satin
Handle: Walnut wood
Blade length: 90mm.
Blade thickness: 3.8mm.
Total length: 220mm.
Weight: 180g.
Sheath: leather, ambidextrous, modular, made in Italy
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Leatherman Signal – Multi-purpose for adventure 100% Made in the USA
Compact, complete, always ready. Signal is the multi-purpose tool designed for those who experience nature without compromise. Measuring just 11 cm when closed, it contains 19 essential tools for tackling the mountains, camping, or hiking in total autonomy and safety. A hammer, fire starter, 420HC steel combination blade, emergency whistle, and diamond sharpener are just some of the tools that make it your best ally in the great outdoors.

With its ferrocerium rod, integrated signal whistle, and removable pocket clip, Signal is designed for the most unpredictable situations. The full locking mechanism and the ability to open the tools with one hand ensure speed and safety in every use.

Choose Signal and enjoy the peace of mind of having everything you need in one tool, wherever your next adventure takes you. Entirely made in the USA and covered by a 25-year warranty.

Tools included
* Flat nose pliers
* Regular pliers
* Premium replaceable wire cutters
* Premium replaceable wire cutters
* Wire stripper
* 420HC steel combo knife
* Saw
* Hammer
* Awl with slot
* Can opener
* Bottle opener
* 1/4" hex bit holder
* Bit holder
* 1/4" ring wrench
* Carabiner
* 3/16" socket wrench
* Ferrocerium rod (fire starter)
* Emergency whistle
* Diamond-coated sharpener

Technical specifications
* Weight 212.62g.
* Closed tool length 11.43cm.
* Open tool length 17.14cm.
* Width 3.81cm.
* Overall thickness 1.6cm.
* Main blade length 6.93cm

Materials and finishes
* 420HC stainless steel blade with micro-blasted finish
* Liner lock blade locking mechanism
* 420 stainless steel construction
* CeraKote finish
* Stainless steel tools with micro-blasted finish
* Stainless steel clip
* FRN (Fiberglass Reinforced Nylon) accessories

Leatherman Signal – Multi-purpose for adventure 100% Made in the USA
Compact, complete, always ready. Signal is the multi-purpose tool designed for those who experience nature without compromise. Measuring just 11 cm when closed, it contains 19 essential tools for tackling the mountains, camping, or hiking in total autonomy and safety. A hammer, fire starter, 420HC steel combination blade, emergency whistle, and diamond sharpener are just some of the tools that make it your best ally in the great outdoors.

With its ferrocerium rod, integrated signal whistle, and removable pocket clip, Signal is designed for the most unpredictable situations. The full locking mechanism and the ability to open the tools with one hand ensure speed and safety in every use.

Choose Signal and enjoy the peace of mind of having everything you need in one tool, wherever your next adventure takes you. Entirely made in the USA and covered by a 25-year warranty.

Tools included
* Flat nose pliers
* Regular pliers
* Premium replaceable wire cutters
* Premium replaceable wire cutters
* Wire stripper
* 420HC steel combo knife
* Saw
* Hammer
* Awl with slot
* Can opener
* Bottle opener
* 1/4" hex bit holder
* Bit holder
* 1/4" ring wrench
* Carabiner
* 3/16" socket wrench
* Ferrocerium rod (fire starter)
* Emergency whistle
* Diamond-coated sharpener

Technical specifications
* Weight 212.62g.
* Closed tool length 11.43cm.
* Open tool length 17.14cm.
* Width 3.81cm.
* Overall thickness 1.6cm.
* Main blade length 6.93cm

Materials and finishes
* 420HC stainless steel blade with micro-blasted finish
* Liner lock blade locking mechanism
* 420 stainless steel construction
* CeraKote finish
* Stainless steel tools with micro-blasted finish
* Stainless steel clip
* FRN (Fiberglass Reinforced Nylon) accessories

VIPERA is born from the fusion between the tactical and survival worlds, combining speed of use, robustness, and precision in a knife weighing less than 100 grams. Equipped with an elongated drop-point blade with a full flat grind and narrow edge, it offers penetration, smooth cutting, and hardness up to 61 HRC. It is available in two high-performance steels, both with excellent edge retention and corrosion resistance. The ergonomic handle with integrated guard ensures maximum control in all conditions, while the ASPIS nylon sheath allows for stable and versatile carrying.

VIPERA Nitrogen (Stone Washed, HCS, Ranger Green)
This variant is designed for outdoor, survival, bushcraft, and prepping users: areas where reliability in the field, weather resistance, and maintainability are essential. Nitrogen steel maintains excellent edge retention, combined with excellent rust resistance and, above all, greater ease of resharpening compared to M390. The increased resilience makes these models more tolerant to the abuse typical of a field environment.

Technical insight into nitrogen-added steels
Nitrogen steels, or nitrogen-added steels, are alloys in which nitrogen is used as an alloying element instead of, or in addition to, carbon. Although nitrogen is less effective than carbon in hardening the martensitic matrix, it has the advantage of forming stable compounds with chromium to a much lesser extent. This allows a greater amount of chromium to be kept in solid solution, improving corrosion resistance. In addition, nitrogen contributes to the hardness and stability of the structure, giving these steels a good balance between hardness, toughness, and corrosion resistance. Compared to traditional martensitic steels, nitrogen steels can therefore offer a better combination of mechanical properties and resistance to chemicals, while maintaining good workability and sharpenability characteristics.

Intended use: Outdoor / Utility / Bushcraft

Type of production: Industrial
Country of production: Italy
Blade: nitrogen-alloyed stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 116mm.
Blade thickness: 4 mm.
Total length: 236 mm.
Weight: 95 g.
Sheath: ASPIS nylon with two multi-position clips, M.O.L.L.E. compatible.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

VIPERA is born from the fusion between the tactical and survival worlds, combining speed of use, robustness, and precision in a knife weighing less than 100 grams. Equipped with an elongated drop-point blade with a full flat grind and narrow edge, it offers penetration, smooth cutting, and hardness up to 61 HRC. It is available in two high-performance steels, both with excellent edge retention and corrosion resistance. The ergonomic handle with integrated guard ensures maximum control in all conditions, while the ASPIS nylon sheath allows for stable and versatile carrying.

VIPERA Nitrogen (Stone Washed, HCS, Ranger Green)
This variant is designed for outdoor, survival, bushcraft, and prepping users: areas where reliability in the field, weather resistance, and maintainability are essential. Nitrogen steel maintains excellent edge retention, combined with excellent rust resistance and, above all, greater ease of resharpening compared to M390. The increased resilience makes these models more tolerant to the abuse typical of a field environment.

Technical insight into nitrogen-added steels
Nitrogen steels, or nitrogen-added steels, are alloys in which nitrogen is used as an alloying element instead of, or in addition to, carbon. Although nitrogen is less effective than carbon in hardening the martensitic matrix, it has the advantage of forming stable compounds with chromium to a much lesser extent. This allows a greater amount of chromium to be kept in solid solution, improving corrosion resistance. In addition, nitrogen contributes to the hardness and stability of the structure, giving these steels a good balance between hardness, toughness, and corrosion resistance. Compared to traditional martensitic steels, nitrogen steels can therefore offer a better combination of mechanical properties and resistance to chemicals, while maintaining good workability and sharpenability characteristics.

Intended use: Outdoor / Utility / Bushcraft

Type of production: Industrial
Country of production: Italy
Blade: nitrogen-alloyed stainless steel
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 116mm.
Blade thickness: 4 mm.
Total length: 236 mm.
Weight: 95 g.
Sheath: ASPIS nylon with two multi-position clips, M.O.L.L.E. compatible.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

The Fox Vintage Horn Multitool is not just a knife, but a true adventure companion. This multitool pocket knife, made of pressed horn, offers no less than 9 essential functions for those who love the outdoors or need a reliable tool in any situation.

Pressed horn is a composite material obtained by fragmenting and then compacting natural horn using heat and controlled pressure. During the process, the keratin particles are softened and partially fused, allowing the formation of homogeneous and stable blocks or sheets.

Features:

Large blade: Sharp and durable, ideal for precise cutting and slicing.
Small blade: Perfect for detailed work and finer cuts.
Corkscrew: For opening wine bottles easily and effortlessly.
Can opener: Essential for opening preserves and cans when camping or traveling.
Cap lifter with screwdriver: Combines the functionality of opening bottles with a handy screwdriver.
Awl - Reamer: Ideal for piercing materials or enlarging existing holes.
Key ring: To keep the multitool handy attached to your keys or backpack.

Type of production: Industrial
Country of production: Italy
Blade: 420HC stainless steel
Handle: brass and pressed horn
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 100mm.
Total length: 175mm.
Closed thickness: 12mm.
Weight: 85g.
Sheath: -
Packaging: no packaging
Notes: vintage product, manufactured in the 1980s

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: 420HC stainless steel
Blade treatment: Satin
Handle: Aluminum 6061-T6 DLC coated
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Total length: 151mm.
Thickness when closed: 11mm.
Balance: -
Weight: 38g.
Opening: hole on the blade
Washers: brass
Closure: Liner Lock
Clip: stainless steel, removable,with bottle opener function
Sheath: -
Packaging: cardboard box with Leatherman logos
Notes: -

Translated with DeepL.com (free version)

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: Aluminum 6061-T6 DLC coated
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Total length: 151mm.
Thickness when closed: 11mm.
Balance: -
Weight: 38g.
Opening: hole on the blade
Washers: brass
Closure: Liner Lock
Clip: stainless steel, removable,with bottle opener function
Sheath: -
Packaging: cardboard box with Leatherman logos
Notes: -

Translated with DeepL.com (free version)

Official reproduction, made under film license by Hollywood Collectibles, of the knife used in the film "Rambo III". This model features a signature on the blade of John Rambo and is a limited edition.

Intended use: Survival/Collection

Blade: 420J2 stainless steel
Country of production China
Handle: in wood, with stainless steel guard and knob
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinematographic license
Limited Edition: blade and scabbard signed "John Rambo", limited and numbered edition made in 10,000 copies

Functionality that can be used with only one hand
Convenient to be able to have one hand free, isn't it? Open and use the tools in this tool with one hand.

Features accessible from the outside
This multifunction tool features tools that are accessible while the tool is folded or closed.

Compatible with the bit kit
Add features and other screwdrivers. This multi-purpose tool is compatible with our Custom Tip Kit and also with the ratchet.

Removable pocket clip
Remove this pocket clip whenever you want.

Tools: Stainless Steel
Handle: Stainless Steel
Length closed: 100 mm.
Length open: 159 mm.
Weight: 212 g.
Scabbard: Cordura, belt-mounted

Equipment:
01 Flat-nose pliers
02 Regular pliers
03 Cable cutter pliers
04 Wire cutter pliers
05 Wire stripper
06 420HC steel knife
07 Large Tip Holder (I)
08 Spring scissors
09 Diamond file
10 Can opener
11 Bottle opener
12 Awl with buttonhole
13 Ruler (10 cm)
14 Wood/metal file
15 Medium screwdriver

Old Bear ™ is the new and exclusive line of pocket knives produced by Antonini from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is made using traditional production techniques with a high level of manual skills.

Type of production: semi artisanal
Country of production: Italy
Blade: 420 stainless steel 54/56 HRC
Handle: in American walnut wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 115mm.
Thick when closed: 22mm.
Total length: 175mm.
Weight: 55g.
Closure: in brass, with lock both in opening and closing

The handles are made of oiled American walnut wood while the blade made of stainless steel, sharpened and hand-picked on the stone by skilled craftsmen.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments such as to make every single knife unique, original and non-standardized. Any surface irregularities represent the confirmation of our manual processing and do not absolutely affect the operational functionality of the tool.

With the Rebar, Leatherman fans will instantly recognize the iconic box shape found in Tim Leatherman's original PST design. The Rebar pliers have been optimized to offer greater strength and feature replaceable wire / cable cutters, a first for a little more than ten centimeters Leatherman tool. It has all the features to carry out even the most difficult jobs, with smaller and thinner dimensions. The Rebar guarantees instant success at work and in home projects around the world.

Tools included:

01 Flat nose pliers
02 Regular caliper
03 Interchangeable steel wire cutting pliers 154CM
04 Interchangeable 154CM steel cable cutting pliers
05 Crimping machine for electric wires
06 Wire stripper
07 420HC steel knife
08 420HC steel serrated knife
09 Saw
10 Awl with slot
11 Ruler (19 cm)
12 Can opener
13 Bottle opener
14 Wood / metal file
15 Phillips screwdriver

Features:
All blades and tools have a safety lock
Body in stainless steel
Handles in stainless steel
Stainless steel tools
25 year guarantee

Dimensions:
10.16 cm (Closed)
189.94 g (Weight)
7.36 cm (Blade length)

Intended use: Tactical / Hiking

Type of production: industrial
Blade: full tang, 420HC stainless steel
Blade Treatment: Ceramic Coating
Blade production: USA
Handle: fiberglass and nylon with non-slip rubberized polymers
Blade length: 122mm.
Blade thickness: 5mm.
Total lenght: 248mm.
Balance: set back 1cm.
Weight: 204g.
Scabbard: Nylon and polymer, multi-position and MOLLE compatible.
Notes: Rear skullcrasher that integrates the hole for the wrist strap.

New Coyote Tan color with Black Oxyde treated tools, blades and claws. Designed for the outdoors, this multi-purpose tool features a fire starter, hammer, one-handed usable blade and emergency whistle. 

SPECIFICATIONS

Length when closed: 11.4cm.
Width when closed: 3.8cm.
Length when open: 17.1cm.
Blade length: 6.9cm.
Handle thickness: 1.6cm.
Weight: 213g.

TOOLS INCLUDED

01 Flat nose pliers
02 Regular pliers
03 Interchangeable wire-cutting pliers 154CM steel
04 Interchangeable wire-cutting pliers 154CM
05 Wire stripper
06 Combo knife in 420HC steel
07 Saw
08 Hammer
09 Awl with slot
10 Can opener
11 Bottle opener
12 1/4" hexagonal bit holder
13 Drill bit holder
14 1/4" ring wrench
15 Snap hook
16 3/16″ socket wrench
17 Whistle
18 Tinderbox
19 Diamond coated sharpener

Revisiting a classic Ontario model, this Old Hickory fish fillet knife comes with a leather sheath. Ideal for hunting, fishing or cooking, the Ontario Old Hickory 417 Filet Knife features a 16cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.

Intended use: Fishing / Hunting / Cooking

Type of production: Industrial
Country of production: USA
Blade: 55-58 HRC stainless steel
Blade treatment: satin finish
Handle: wood
Blade length: 160mm.
Blade thickness: 2mm.
Total length: 275mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi artisanal
Production Lama: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: walnut wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closure: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi-artisan
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: olive wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Length closed: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closing: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9327/19 Electrician

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 44g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.

The most popular of Leatherman's pliers is now available in a new, further improved version thanks to the addition of interchangeable, durable wire cutters. 

Tools: Nitrided stainless steel
Handle: Nitrided stainless steel
Closed length: 100 mm.
Open length: 160 mm.
Weight: 238 g.
Sheath: -

Equipment:
Pliers with fine tips
Interchangeable wire cutters
Flat blade knife
Serrated knife
Iron file
Wood file
Diamond file
Saw
Screwdriver bit holder
Precision screwdriver bit holder
Large flat screwdriver
Precision flat screwdriver
Phillips screwdriver
Precision Phillips screwdriver
19 cm ruler.
Bottle opener/can opener
Wire stripper
Carrying hole 

The most popular of the Leatherman pliers is now available with a new version further improved thanks to the addition of interchangeable and resistant cutters.

Tools: Stainless Steel
Handle: Stainless Steel
Closed length: 100 mm.
Open length: 160 mm.
Weight: 238 g.
Sheath: -

Endowment:
Plier with thin points
Interchangeable wire cutters
Flat-blade knife
Serrated knife
File for iron
File for wood
Diamond file
Saw
Screwdriver connection
Precision screwdriver insert
Large flat screwdriver
Precision flat screwdriver
Phillips screwdriver
Precision Phillips screwdriver
19cm ruler.
Bottle opener / can opener
Cable strippers
Hole for transport

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Olive wood
Blade Length: 100mm.
Blade thickness: 2mm.
Closed length: 127mm.
Closed thickness: 22mm.
Total length: 225mm.
Weight: 67g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

9307/17

Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 97mm.
Thick when closed: 22mm.
Overall length: 170mm.
Weight: 34g.
Closing: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

9307/19 M

Type of production: mostly by hand
Production Country: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 80mm.
Blade Thickness: 2mm.
Closed Length: 109mm.
Thick when closed: 22mm.
Overall length: 190mm.
Weight: 36g.
Closing: rotating block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Intended Use: Tactical / Hiking

Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole

Surge is the perfect combination of the Wave's craftsmanship, beauty, and practicality with its 4 external tools with Liner Lock closure and a perfect professional tool with larger dimensions and oversized tools to ensure absolute robustness.

Tools: Nitrided stainless steel
Handle: Nitrided stainless steel
Closed dimensions: 115x40x20 mm.
Open dimensions: 180x60x20 mm.
Weight: 344 g.
Sheath: -

Stainless steel body
Blade lock on each tool
Needle-nose pliers
Pliers
Wire cutters
Wire cutters with interchangeable blades
Wire strippers
Clip point knife
Serrated knife
Scissors
Diamond file for wood and metal
Interchangeable saw
5/16" screwdriver
small screwdriver
large screwdriver
straight edge (9 inches/22 cm)
bottle opener
can opener
screwdriver bit tool
one Phillips screwdriver bit
one medium screwdriver bit
tie ring

Intended Use: Tactical / Hiking

Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole

Intended Use: Tactical / Hiking

Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole

Specifications Rev:
Lama flush smooth stainless steel 420HC
screwdriver Middle
Apripacchi
bottle opener
can opener
Phillips screwdriver
Ruler (1.5 in / 3.8 cm)
screwdriver Middle
Nose pliers tip
pliers normal
nippers
Cutters
Lima for iron and wood

details:
25 year warranty
Outdoor knife with liner lock closure
removable clip
Stainless steel body
Stainless steel handles

size:
Blade length: 6.6cm.
Length closed: 9.7cm.
Weight: 168g.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 420HC stainless steel
Handle: Phenolic resin
Blade length: 102mm.
Blade thickness: 3.5mm.
Total length: 209mm.
Weight: 122g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -

The United Cutlery GH0947 throwing knife set, designed by the legendary master knifemaker Gil Hibben, is an excellent choice for throwing enthusiasts and professionals. Each knife is made of 420 stainless steel, known for its strength and durability, and features a full tang skeletonized design, offering perfect balance and a secure grip. The sharp blade and aerodynamic shape ensure a stable trajectory and effective target penetration. The set includes three identical knives and a faux leather sheath, ideal for transport and storage. This kit is perfect for those looking to improve their accuracy with professional knives designed by an industry icon.

Features:

- Sharp and durable stainless steel blades.
- Symmetrical handles suitable for both right- and left-handed people.
- 2 handle modes - index finger can also be placed on the curved area above the handle.
- Ergonomic handles that make prolonged use of the scissors comfortable.

Caution:

- Use scissors only to cut/thread flower stems.
- Properly close the scissors after each use to avoid damaging the blades.
- Keep the scissors out of the reach of children.
- Clean blades regularly and keep them sharp to prolong product life.

Recommended use: Cutting flower stems.

Country of manufacture: Italy

Blade: Japanese 420 J2 stainless steel 52-54 HRC

Handle: PP + TPR

Length: 190mm.

Packaging: Plastic and cardboard

Compatible with the following Leatherman pliers:

* Skeletool
* Skeletool Cx
* Wave (dal 2004 in poi)
* Charge AL
* Charge ALX
* Charge Ti
* Charge TTi
* MUT
* MUT Black
* MUT EOD

Extension / Port Bit entirely made of stainless steel, entering the port bits already present in the caliper, allowing the use of common readily available hexagonal bits on the market and widely used on cordless drills and screwdrivers in general.

COMPATIBILITA' CON MODELLI LEATHERMAN:

* Arc (tutte le varianti)
* Wave Alpha (tutte le varianti)
* Wave / Wave+ (tutte le varianti)
* Surge (tutte le varianti)
* Charge / Charge+ (tutte le varianti)
* MUT (tutte le varianti)
* Signal (tutte le varianti)
* Skeletool
* Skeletool CX
* Super Tool 300M
* Curl

UTENSILI PRESENTI

* Esagonale 1.5mm e 2mm
* Esagonale 2.5mm e 3mm
* Esagonale 4mm e 5mm
* Esagonale 6mm e 1/4"
* Esagonale 7/32" e 3/16"
* Esagonale 5/32" e 9/64"
* Esagonale 1/8" e 7/64"
* Esagonale 3/32" e 5/64"
* Esagonale 1/16" e .050"
* Robertson #3 e #2
* Robertson #1 e Pozi
* Pozi #2 e #1
* Torx #10 e #15
* Torx #20 e #25
* Torx #27 e #30
* Phillips #0 e #3
* Phillips #1 e #2
* Piatto 3/32" e 1/8"
* Piatto 5/32" e 3/16"
* Piatto 7/32" e 1/4"
* Phillips e Piatto per occhiali ed ottiche

Specifications:
Serrated stainless steel 420HC
screwdriver Middle
Apripacchi
bottle opener
Can Opener
Phillips screwdriver
Ruler (1 in/2.54 cm)
Scissors
screwdriver Middle
Pointy nose pliers and spring opening
Normal pliers with spring aperrtura
Cutter with spring opening
cutters
File for iron and wood

Details:
25-year warranty
Outer blade with liner lock closure
removable clip
Stainless steel body
Stainless steel handles

size:
Blade Length: 6.6cm.
Length when closed: 9.7cm.
Weight: 198.4g.

Specifiche:

Lama seghettata in acciaio inox 420HC
Cacciavite Medio
Lama in acciaio inox 420HC
Apribottiglie
Aprilattine
Cacciavite Phillips
Righello (1 in/2.54 cm)
Sega per legno
Cacciavite Medio
Pinze con becchi a punta e apertura a molla
Pinze normali con aperrtura a molla
Tronchese con apertura a molla
Tagliacavi
Lima per ferro e legno

Dettagli:

Garanzia di 25 anni
Lame esterne con chiusura liner lock
Anello per correggiolo
Fodero in Nylon da cintura
Clip amovibile
Corpo in acciaio inox
Impugnature in acciaio inox

Dimensioni:

Lunghezza Lama: 6.6cm.
Lunghezza da chiusa: 9.7cm.
Peso: 198.4g.

Designed for field work and big-game hunting enthusiasts, the Buck Vanguard is a fixed-blade knife that combines tradition, durability, and reliability. A classic model from Buck, designed to confidently handle game preparation and processing thanks to its Drop Point blade, ergonomic handle, and safety guard that ensures optimal control during use.

The 420HC steel blade, subjected to a specific Buck heat treatment, offers an excellent balance between strength, ease of resharpening, and edge retention. The Heritage Walnut DymaLux® handle with brass accents gives the knife an elegant and traditional look, while maintaining a secure and comfortable grip even during prolonged use.

Made in the United States with select materials and meticulous craftsmanship, the Vanguard comes with a dedicated sheath: an indispensable companion for hunters, outdoor enthusiasts, and anyone seeking a sturdy, functional fixed-blade knife steeped in history.

Intended Use: Sports / Hunting

Production Type: Industrial
Country of Origin: USA
Blade: 420HC stainless steel
Blade Finish: Satin
Handle: Walnut with brass guard and pommel
Blade Length: 90 mm
Blade Thickness: 3.5 mm
Overall Length: 215 mm
Weight: 186 g
Sheath: Brown leather
Packaging: Cardboard box with Buck logos

Surge is the perfect combination of the Wave's craftsmanship, beauty, and practicality with its 4 external tools with Liner Lock closure and a perfect professional tool with larger dimensions and oversized tools to ensure absolute robustness.

Tools: Stainless steel
Handle: Stainless steel
Closed dimensions: 115x40x20 mm.
Open dimensions: 180x60x20 mm.
Weight: 344 g.
Sheath: -

Stainless steel body
Blade lock on each tool
Needle-nose pliers
Pliers
Wire cutters
Wire cutters with interchangeable blades
Wire strippers
Clip point knife
Serrated knife
Scissors
Diamond file for wood and metal
Interchangeable saw
5/16" screwdriver
Small screwdriver
Large screwdriver
Ruler (9 inches/22 cm)
Bottle opener
Can opener
Screwdriver bit tool
One Phillips screwdriver bit
One medium screwdriver bit
Ring for tie

Intended use: Collection

Blade: Stainless Steel 420J2.
Manicure: Aluminum and paracord
Blade Length: 225mm.
Blade thickness: 5.5mm.
Grip length: 105mm.
Total length: 349mm.
Balance: on guard branch
Weight: 418g.
Sheath: in leather (with sharpening stone)
Notes: official reproduction on Hollywood Hollywood Film Collectibles license - The knife is also equipped with a compass with survival kit, inserted into the handle

Intended use: Survival / Collection

Blade: 420J2 stainless steel
Lama production China
Handle: Wood
Blade length: 320mm.
Blade thickness: 5.5mm.
Length closed: -
Total length: 455mm.
Balancing: -
Weight: 922g.
Closing: -
Clip: -
Sheath: leather
Notes: Official reproduction under cinema license
Send feedback
History
Saved
Community

Purpose of use: Survival / Collection

Blade: Stainless Steel 420J2
Manicure: Aluminum and Paracord
Blade Length: 255mm.
Blade thickness: 5.5mm.
Handle Length: 100mm.
Total Length: 395mm.
Balance: Advanced, 2cm. From the lower guard branch
Weight: 504g.
Closure: -
Clip: -
Sheath: in leather
Notes: Compass with survival kit in the handle, in the sheath.