custom knives

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory

Intended use: collection/tactical

Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available: Rudy Ruana passed away in 1986, Ruana knives are still in production and orderable on their site with waiting lists, but in different configurations from this one.
* Sharpening: Factory original, improvable, with some cosmetic abrasion.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on the aluminum handle.
* Packaging: -
* Scabbard: Leather, handcrafted, original, with a few small marks given by age.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended use: hunting / light hiking

Type of production: handcrafted
Country of production: USA
Blade: made of undeclared high carbon steel (presumably 1095 or 5160), hammer-forged, ground, individually oil-hardened and heat-treated using a zone tempering method that makes the back and tang of the blade softer than the cutting edge
Blade finish: satin-finished
Handle: cast aluminum directly on tang with beveled and riveted elk horn inserts. The tang runs inside the full length of the handle, and the cast aluminum produces a strong handle that is impossible to break.
Blade length: 125mm.
Blade thickness: 4.5mm.
Total length: 235mm.
Weight: 190g.
Sheath: handcrafted, leather, for vertical carrying on the belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection

Company History.
In 1938, Rudy Ruana began making knives in a small store in Montana. Members of his family continue to this day to handcraft Ruana knives in the same store. In 1964 Ruana's son-in-law, Vic Hangas, left a job with a telephone company and put his artistic talents to good use, joining Ruana in the business. Hangas' son Mark began working in the business in 1976. In 1983, Ruana retired at the age of 80 and sold the business to the Hangas family. In 1984 Mike Hangas joined his brother and father and the company was incorporated. Rudy Ruana died in April 1986. He was honored with posthumous induction into the American Bladesmith Society's Hall of Fame in 1997 and Blade magazine's Cutlery Hall of Fame in 2002.

Ruana knives are still handmade in the small Montana store where Rudy Ruana began forging blades more than 80 years ago. In an era of outsourcing and diminishing Made in America products, Ruana knives are still handmade in the United States, with a focus on quality rather than quantity. Although some things have changed over the years, still using the same methods and much of the same equipment used by Rudy Ruana.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available On order, with waiting list.
* Sharpening: Factory original, can be improved.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on aluminum tang.
* Packaging: -
* Scabbard: Leather, handcrafted, original.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended use: hunting / fishing / light hiking

Type of production: handcrafted
Country of production: USA
Blade: O1 steel
Blade finish: satin finish
Handle: leather rings, brass guard, duralumin pommel
Blade length: 115mm.
Blade thickness: 3.8mm.
Total length: 230mm.
Weight: 130g.
Scabbard: handmade, leather, for vertical carrying on belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection

History of the Model
The Model 7 was designed as a scaled-down version of the Model 3 Hunter.

Almost immediately, the idea of a scaled-down version of the new Hunter dawned on Bo Randall as an ideal knife for his fellow anglers. An avid fisherman since his youth, Bo regarded this new knife as a labor of love and immediately set to work on the project. At first he tried 4- and 4.5-inch blades, but then opted for the 4 1/2-inch one. Bo wanted the right handle for cleaning brook trout and similar sized fish, so he reduced the size of the handle of the new Hunter and changed its shape. Naturally, he called this model the "Fisherman," and some early prototypes with 4-inch blades were delivered to some dealers during the latter part of September 1945.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On commission
* Sharpening: Factory.
* Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
* Marks on handle: No.
* Packaging: Zip pouch, original
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory



Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel ATS-34 60HRC
Blade finish: satin finish
Handle: deer Sambar with stainless steel 416 guard
Blade length: 87mm.
Blade thickness: 4mm.
Total length: 198mm.
Weight: 80g.
Sheath: handcrafted, leather, for vertical belt carry
Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collection

Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition