Led Flashlights Nitecore

The EX7 offers up to 6,000 lumens thanks to its 20-core LEDs and allows you to choose between three beam modes: Spotlight, Floodlight, and Mixed Light.

It is the first flashlight in the world to use X-shaped matrix M515S LEDs, which guarantee greater efficiency, optimal heat dissipation, and high-quality light beam. Users can customize the lighting on 4 levels (LOW, MID, HIGH, TURBO), with advanced features such as 6,000-lumen LUMIN SHIELD®, SEARCH mode with a range of up to 500m, and STROBE mode with random frequencies to maximize disorientation effects.

Supplied with a 21700 NL2155HP rechargeable battery, it features USB-C charging, a magnetic rear cap, a reversible clip, and IP68 waterproof and 2m impact resistance certification: superior performance in all conditions.

TECHNICAL DATA
LEDs: 4 x 5-Core M515S LEDs (20 in total) with X-shaped matrix, with a life cycle of over 50,000 hours
Operating modes: 3 operating modes (FLOOD, SPOT, and MIX) for a total of 12 different electronically adjusted light intensities + SEARCH mode, LUMIN SHIELD mode, ULTRALOW mode, and STROBE mode, all assisted by the ATR system, which automatically adjusts the brightness of the flashlight based on the heat of the LED to ensure the best possible performance at all times.

TEMPORARY SPECIAL MODES
Power and Duration LUMIN SHIELD: 6000 lumens (2h)
Power and Duration SEARCH: 3000 lumens (2.15h)
Power and Duration STROBE: 3500 lumens (n.a.)

STANDARD MODES MIX / FLOOD / SPOT
Power and Duration: 1500 lumens (2.30h) -> 600 lumens (5.30h) -> 180 Lumens (15h) -> 30 Lumens (80h)

Peak power: 63,470 candelas in SEARCH mode
Maximum illumination distance: 500 m in SEARCH mode
Switching method: Multifunction front button
Light selection method: Multifunction front button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: optical glass with scratch-resistant coating on both sides
Battery included: 1x 5,500mAh NL2155HP rechargeable 21700 battery with 20A discharge (also compatible with batteries with discharge capacities lower than 20A, which however do not allow access to the SEARCH, STROBE, and LUMIN SHIELD functions) 
Dimensions: 13cm (L) - 2.8cm (D barrel and tail) - 3.5cm (D head)
Weight: 214g with battery included / 140g torch only
Accessories included: NL2155HP battery, reversible clip, wrist strap, USB charging cable, spare O-ring
Waterproof: IP68 standard, submersible up to 2m deep for 30min.
Impact resistance: withstands drops from up to 2m high

Italian warranty “Nitecore Italia”: Flashlight guaranteed for 5 years - Battery guaranteed for 12 months

Nitecore DL30 is a professional underwater flashlight designed to provide powerful and reliable illumination for the most demanding dives. With a maximum output of 1100 lumens and a beam distance of up to 861 meters, this flashlight is perfect for deep-sea explorations, cave diving, and night snorkeling. The 3-degree beam angle ensures precise and focused lighting, making it ideal for identifying details even in the darkest marine environments.

Thanks to its robust and waterproof construction (IP68) up to 100 meters deep, the Nitecore DL30 is shock-resistant and built to last. Powered by a USB-C rechargeable battery, it offers up to 6 hours of runtime on a single charge. Additionally, the integrated LED charge indicator allows easy battery status monitoring.

This flashlight features two lighting modes: a continuous mode with four adjustable brightness levels and a flashing mode with five options, including SOS and variable interval signaling, making it an essential tool for emergency situations. The included removable diffuser can transform it into a signal light or a soft ambient light when needed.

With its ergonomic design and included wrist strap, the Nitecore DL30 ensures a secure grip even when wearing diving gloves, making it an ideal choice for both professionals and underwater enthusiasts.

Technical Specifications

Intended Use: Scuba diving, snorkeling, cave diving, emergencies
Production Type: Industrial
Country of Manufacture: China
Maximum Lumens: 1100 lumens
Maximum Beam Distance: 861 meters
Beam Intensity: 155420 cd
Lighting Modes: 4 brightness levels + 5 flashing modes
Maximum Runtime: 6 hours
Battery: Nitecore NL2153R USB-C rechargeable
Waterproof Rating: IP68 (up to 100 meters deep)
Impact Resistance: Up to 1 meter
Body Material: Anodized aluminum with reinforced tempered glass
Length: 164.5 mm
Head Diameter: 47.8 mm
Tube Diameter: 28.7 mm
Weight: 273 g (in air), 126 g (underwater)
Included Accessories: Rechargeable battery, USB-C cable, diffuser with lanyard, wrist strap

Brightness Levels

Continuous Mode:
Turbo: 1100 lumens – 2 hours
High: 800 lumens – 3 hours
Mid: 650 lumens – 4 hours
Low: 350 lumens – 6 hours

Flashing Mode:
SOS: 1100 lumens – variable duration
Quick Flashing: 1100 lumens – variable duration
Flashing: 1100 lumens – variable duration

P30i hunting torch with GM02MH magnetic attachment

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

Utilizza un Led CRI a tonalità calda che permette all'occhio umano di riconoscere meglio i colori e le forme al buio; pensata soprattutto come torcia medica in modo da permettere al personale di effettuare diagnosi accurate. il Led CRI è fotobiologicamente sicuro, come da standard IEC/EN62471 ed elimina qualsiasi pericolo di luce azzurra emessa causa di danni fotochimici alla retina.

Potenze e durate certificate in laboratorio da standard ANSI/NEMA FL1 utilizzando 2x AAA 1.2V 750mAh - in differenti condizioni di uso o utilizzando differenti batterie, i dati possono variare

LED: 1x Led Nichia 219B CRI - con un ciclo vitale di 50.000 ore 
Modi Operativi: 2, regolati elettronicamente
Potenze e Durate: 180 Lumens (45min.) -> 45 Lumens (5.15h.) -> 4 Lumens (35h.)
Picco di potenza: 860 candele
Distanza di illuminazione massima: 58m.
Metodo di accensione: Pulsante posteriore - Si accende sempre alla minima potenza
Metodo di selezione luminosa: Pulsante posteriore
Testa: alluminio aeronautico
Corpo: alluminio aeronautico
Finitura: anodizzata, Type III
Lente: vetro indurito ultra trasparente con trattamento antiriflesso e sistema PDOT brevettato
Batterie: funziona con 2 batterie usa e getta o ricaricabili AAA da 1.2/1.5V (vendute separatamente)
Misure: 12.8cm (L) - 0.55cm (D fusto) - 1.4cm (D testa)
Peso: 22g. batterie escluse
Accessori: clip, o-ring di ricambio
Impermeabilità: come da standard IPX-8 - immergibile fino a 2mt. di profondità per 30min.
Resistenza agli impatti: resiste a cadute da 1.5m di altezza